Recommend to use services.xserver.dpi option instead. Mention in the
documentation that it's a sledgehammer approach and monitor settings should be
used instead.
Also don't set DPI in fontconfig settings; fontconfig should use Xft settings
by default so let's not override one value in multiple places. For example,
user now can set DPI via ~/.Xresources properly.
Most desktop environments manage the cursor using the Xcursor library
by default; this comes with scalable or multiple-sized cursor themes.
However, when running just a simple WM (twm, bspwm, ...) the cursor
handling is left to the X server, which uses a very simple fixed bitmap
font (this is called a "core" cursor). The font is uncomfortably small
on a high DPI display and must be replaced with a saner default.
Up until recently[1] it used to be possible to change the font on the
xserver command line, however the font name is now hardcoded. It's still
possible to change it, though: here I override the `fontcursormisc`
package and set an alias that points to a vector variant of the original
cursor font. The font size is set to match the standard cursor
dimensions on a 96dpi display. It's not perfect but it's a very simple
and effective solution.
[1]: 56ea4c769c
This change makes it so that accessing config.users.groups.*.members isn't
empty by default, but instead contains all the users whose `extraGroups`
includes that group, allowing fancy things like
{ config, ... }: {
users.groups.libvirt.members = config.users.groups.wheel.members;
}
to add all users in the wheel group to the libvirt group
- The order of NSS (host) modules has been brought in line with upstream
recommendations:
- The `myhostname` module is placed before the `resolve` (optional) and `dns`
entries, but after `file` (to allow overriding via `/etc/hosts` /
`networking.extraHosts`, and prevent ISPs with catchall-DNS resolvers from
hijacking `.localhost` domains)
- The `mymachines` module, which provides hostname resolution for local
containers (registered with `systemd-machined`) is placed to the front, to
make sure its mappings are preferred over other resolvers.
- If systemd-networkd is enabled, the `resolve` module is placed before
`files` and `myhostname`, as it provides the same logic internally, with
caching.
- The `mdns(_minimal)` module has been updated to the new priorities.
If you use your own NSS host modules, make sure to update your priorities
according to these rules:
- NSS modules which should be queried before `resolved` DNS resolution should
use mkBefore.
- NSS modules which should be queried after `resolved`, `files` and
`myhostname`, but before `dns` should use the default priority
- NSS modules which should come after `dns` should use mkAfter.
The attributes got renamed in PR #126440 and in some places this caused
evaluation errors, e.g. the tarball job was saying (locally)
> attribute 'alsaUtils' missing, at /build/source/nixos/modules/services/audio/alsa.nix:6:4
and I suspect that trunk-combined jobset's failure to evaluate was also caused.
Things will get quite broken if an /etc/passwd entry contains a
colon (which terminates a field), or a newline (which terminates a
record). I know because I just accidentally made a user whose home
directory path contained a newline!
So let's make sure that can't happen.
As the only consequence of isSystemUser is that if the uid is null then
it's allocated below 500, if a user has uid = something below 500 then
we don't require isSystemUser to be set.
Motivation: https://github.com/NixOS/nixpkgs/issues/112647
Since 03eaa48 added perl.withPackages, there is a canonical way to
create a perl interpreter from a list of libraries, for use in script
shebangs or generic build inputs. This method is declarative (what we
are doing is clear), produces short shebangs[1] and needs not to wrap
existing scripts.
Unfortunately there are a few exceptions that I've found:
1. Scripts that are calling perl with the -T switch. This makes perl
ignore PERL5LIB, which is what perl.withPackages is using to inform
the interpreter of the library paths.
2. Perl packages that depends on libraries in their own path. This
is not possible because perl.withPackages works at build time. The
workaround is to add `-I $out/${perl.libPrefix}` to the shebang.
In all other cases I propose to switch to perl.withPackages.
[1]: https://lwn.net/Articles/779997/
This cropped up, because I have a set-up where my work username is
different to my home desktop username, and I am using a parameterized
config for both, so I have something akin to
config.users.users.default-user = ...;
and using
config.users.users.default-user.{name, home}
in certain places to cope with this. Noticed my home-manager bought in
packages (which use the users.users.<name>.packages hence NixOS issue
not home-manager) weren't present.
It's a dull and boring day, it's cold outside and I'm stuck at home: let
me tell you the story of systemd-vconsole-setup.
In the beginnings of NixOS[1], systemd-vconsole-setup was a powerful
sysinit.target unit, installed and running at boot to set up fonts
keyboard layouts and even colors of the virtual consoles. If needed, the
service would also be restarted after a configuration change, consoles
were happy and everything was good, well, almost.
Since the service had no way to specify the dependency "ttys are ready",
modesetting could sometimes happen *after* systemd-vconsole-setup had
started, leaving the console in a broken state. So abbradar worked
around that by putting a systemd-udev-settle `After=`.
In the meanwhile, probably realizing their mistake, systemd added a
shiny udev rule to start the systemd-udev-settle at the right time[2].
However, the rule bypassed systemd by directly running the binary
`systemd-udev-settle`, and the service - though still installed - fell
into disuse.
Two years would pass before a good samaritan, seeing the poor jobless
systemd-udev-settle service, decided to give it the coup de grâs[3] by
unlisting it from the installed units.
This, combined with another bug, caused quite a commotion[4] in NixOS;
to see why remember the fact that `WantedBy=` in upstream units doesn't
work[5], so it had to be added manually in cc542110, but while systemd
removed it, the NixOS unit continued to install and restart the service,
making a lot of fuss when switching configuration.
After at least thee different tentative fixes, deedrah realised[6] what
the root cause was and fpletz put the final nail[7] in the coffin of
systemd-udev-settle. The service would never see the light of a boot
again, NixOS would not restart it all the time but thanks to udev
consoles would still get their pretty fonts and playful colors.
The En..
..no, wait! You should ask what came of systemd-udev-settle, first.
And why is the service even around if udev is doing all the work?
Udev-settle, like the deceitful snake that he is, laid hidden for years.
He looks innocuous doesn't it? A little hack. Only until it leaves his
den and a poor user[8] drops dead. Obviously, it serves no purpose, as
the service is not part of the boot process anymore, so let's remove it
for good!
About the service, it may not be useful at boot, but it can be started
to pick up changes in vconsole.conf and set the consoles accordingly.
But wait, this doesn't work anymore: the service is never started at
boot (remember f76d2aa6), so switch-to-configuration.pl will not restart
it. Fortunately it can be repaired: here I install a new unit which
does *nothing* on start, but restarts the real service when reloaded.
This perfectly reproduces the original behavior, hopefully without the
original bugs too.
The End?
[1]: cc54211069
[2]: f6ba8671d8 (diff-84849fddcef81458f69725dc18c6614aade5c4f41a032b6908ebcf1ee6740636)
[3]: 8125e8d38e
[4]: https://web.archive.org/web/20180603130107/https://github.com/NixOS/nixpkgs/issues/22470
[5]: https://github.com/NixOS/nixpkgs/issues/81138
[6]: https://web.archive.org/web/20180603130107/https://github.com/NixOS/nixpkgs/issues/22470#issuecomment-330930456
[7]: f76d2aa6e3
[8]: https://github.com/NixOS/nixpkgs/issues/107341
