OpenBSD dynamic libraries never link to libc directly.
Instead, they have undefined symbols for all libc functions they use
that ld.so resolves to the libc referred to in the main executable.
Thus, disallowing undefined symbols will always fail
(cherry picked from commit c49bff2434)
Set HOST_HURD & HOST_UNIX for GNU/Hurd in the makefile-based build
system; the latter variable is important as it will include all the
commit Unix bits.
Meson uses a venerable GNU convention described in
https://www.gnu.org/software/automake/manual/html_node/Scripts_002dbased-Testsuites.html
in which:
> When no test protocol is in use, an exit status of 0 from a test
> script will denote a success, an exit status of 77 a skipped test, an
> exit status of 99 a hard error, and any other exit status will denote
> a failure.
77 is thus what we want, not 99.
Since 24.05 (I think) we need to pass `-c` or Clang thinks we want to
compile *both* a final executable and precompiled header file, and
complains that we cannot use `-o` with multiple outputs. `-c` seems fine
with GCC too, so I just put it in there conditionally.
pararameterisation is not actually needed the way things are currently
set up, and it confused me when trying to understand what the code does.
all but one test sources vars-and-functions.sh, which nominally only
defines variables, but in practice is always coupled with the actual
initialisation. while the cleaner way of making this more legible would
be to source variables and initialisation separately, this would produce
a huge diff.
the change requires a few small fixes to keep the tests working:
- only create test home directory during initialisation
that vars-and-functions.sh wrote to the file system seems not write
- fix creation of the test directory
due to statefulness, the test home directory was implicitly creating
the test root, too. decoupling that made it apparent that this was
probably not intentional, and certainly confusing.
- only source vars-and-functions.sh if init.sh is not needed
there is one test case that only needs a helper function but no
initialisation side effects
- remove some unnecessary cleanups and split parts of re-used test code
there were confusing bits in how initialisation code was repurposed,
which break if trying to refactor the outer layers naively...
Commit d536c57e87 inadvertedly broke build and
installation of all non-autogenerated manual pages (in particular, all the ones
documenting the stable CLI), by moving the definition of the man-pages variable
in doc/manual/local.mk after its usage in mk/lib.mk. Move including the former
earlier so that the correct order is restored.
This is not the most elegant, but will match the SOs in exporting
everything for now. Later we can refine what is public/private to clean
up the interface.
It might seem obnoxious to have yet more configure flags, but I found
controlling both the unit and functional tests with one flag was quite
confusing because they are so different:
- unit tests depending on building, functional tests don't (e.g. when
we test already-built Nix)
- unit tests can be installed, functional tests cannot
- unit tests neeed extra libraries (GTest, RapidCheck), functional
tests need extra executables (jq).
- unit tests are run by `make check`, functional tests are run by `make
installcheck`
Really on a technical level, they seem wholly independent. Only on a
human level ("they are both are tests") do they have anything in common.
I had messed up the logic in cross builds because of this. Now I
split the flag in two (and cleaned up a few other inconsistencies), and
the logic fixed itself.
Co-Authored-By: Robert Hensing <roberth@users.noreply.github.com>
Today, with the tests inside a `tests` intermingled with the
corresponding library's source code, we have a few problems:
- We have to be careful that wildcards don't end up with tests being
built as part of Nix proper, or test headers being installed as part
of Nix proper.
- Tests in libraries but not executables is not right:
- It means each executable runs the previous unit tests again, because
it needs the libraries.
- It doesn't work right on Windows, which doesn't want you to load a
DLL just for the side global variable . It could be made to work
with the dlopen equivalent, but that's gross!
This reorg solves these problems.
There is a remaining problem which is that sibbling headers (like
`hash.hh` the test header vs `hash.hh` the main `libnixutil` header) end
up shadowing each other. This PR doesn't solve that. That is left as
future work for a future PR.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
`installcheck` doesn't yet work, but the rest of the build can now
happen mostly inside a separate build directory.
Progress on #9342
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
The basic idea here is to separate a few intertwined notions:
1. Not all "run bash tests" are "install tests"
2. Not all "run bash tests" use `tests/functional/init.sh`, or any
pre-test initialization at all.
This will used in the next commit when we have a test that check unit
test golden master data.
Also, move our custom `PS4` from the test to the test runner, as it is
part of how we want to display the tests, not the test themselves.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests
- Concepts is harder to understand, the documentation makes a good
unit vs functional vs integration distinction, but when the
integration tests are just two subdirs within `tests/` this is not
clear.
- Source filtering in the `flake.nix` is more complex. We need to
filter out some of the dirs from `tests/`, rather than simply pick
the dirs we want and take all of them. This is a good sign the
structure of what we are trying to do is not matching the structure
of the files.
With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests
functional/
installer/
nixos/
```
Continue with the characterization testing idioms begun in
c70484454f, but this time for unit tests.
Co-authored-by: Andreas Rammhold <andreas@rammhold.de>
Grouping our tests should make it easier to understand the intent than
one long poorly-arranged list. It also is convenient for running just
the tests for a specific component when working on that component.
We need at least one test group so this isn't dead code; I decided to
collect the tests for the `ca-derivations` and `dynamic-derivations`
experimental features in groups. Do
```bash
make ca.test-group -jN
```
and
```bash
make dyn-drv.test-group -jN
```
to try running just them.
I originally did this as part of #8397 for being able to just the local
overlay store alone. I am PRing it separately now so we can separate
general infra from new features.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
switch statements must now match all enum values or disable the
warning.
Explicit is good. This has helped us find two bugs, after solving
another one by debugging.
From now on, adding to an enum will raise errors where they are
not explicitly handled, which is good for productivity, and helps
us decide the correct behavior in all usages.
Notably still excluded from this though are the cases where the
warning is disabled by local pragmas.
fromTOML.cc did not build despite a top-level pragma, so I've had
to resort to a makefile solution for that.
Use `set -u` and `set -o pipefail` to catch accidental mistakes and
failures more strongly.
- `set -u` catches the use of undefined variables
- `set -o pipefail` catches failures (like `set -e`) earlier in the
pipeline.
This makes the tests a bit more robust. It is nice to read code not
worrying about these spurious success paths (via uncaught) errors
undermining the tests. Indeed, I caught some bugs doing this.
There are a few tests where we run a command that should fail, and then
search its output to make sure the failure message is one that we
expect. Before, since the `grep` was the last command in the pipeline
the exit code of those failing programs was silently ignored. Now with
`set -o pipefail` it won't be, and we have to do something so the
expected failure doesn't accidentally fail the test.
To do that we use `expect` and a new `expectStderr` to check for the
exact failing exit code. See the comments on each for why.
`grep -q` is replaced with `grepQuiet`, see the comments on that
function for why.
`grep -v` when we just want the exit code is replaced with `grepInverse,
see the comments on that function for why.
`grep -q -v` together is, surprise surprise, replaced with
`grepQuietInverse`, which is both combined.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Building without tests is useful for bootstrapping with a smaller footprint
or running the tests in a separate derivation. Otherwise, we do compile and
run them.
This isn't fine grained as to allow picking `check` but not `installcheck`
or vice versa, but it's good enough for now.
I've tried to use Nixpkgs' `checkInputs`, but those inputs weren't discovered
properly by the configure script. We can emulate its behavior very well though.
For static builds, we need to propagate all the static library
dependencies to the link of the program. E.g. if libstore-tests-exe
depends on libnixstore-tests, and libnixstore-tests depends on
libstore, then libstore-tests-exe needs to link against libstore.
https://hydra.nixos.org/build/209007480
First, logic is consolidated in the shell script instead of being spread
between them and makefiles. That makes understanding what is going on a
little easier.
This would not be super interesting by itself, but it gives us a way to
debug tests more easily. *That* in turn I hope is much more compelling.
See the updated manual for details.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
gives 2-5% performance improvement across a board of tests.
LTO is broken when using clang; some libs link fine while others crash
the linker with a segfault in the llvm linker plugin. 🙁
Restart the tests (at most once) on `unexpected EOF` errors.
This is truly ugly, but might prevent half of the CI runs to fail
because of https://github.com/NixOS/nix/issues/3605
It's a second attempt to merge the change. Previous attempt
was reverted in b976b34a5b.
Since then underlying failure exposed by original change was
fixed by https://github.com/NixOS/nix/pull/5354.
Below goes description of original change:
The link failure happens on a system with stable nix-2.3.15
installed in /usr/lib64 (it's libutil.so API differs from master):
```
LANG=C make V=1
g++ -o /home/slyfox/dev/git/nix/src/libstore/libnixstore.so \
-shared -L/usr/lib64 -Wl,--no-copy-dt-needed-entries \
src/libstore/binary-cache-store.o ... src/libstore/uds-remote-store.o \
-lsqlite3 -lcurl -lsodium -pthread -ldl -lseccomp -Wl,-z,defs -Wl,-soname=libnixstore.so
-Wl,-rpath,/home/slyfox/dev/git/nix/src/libutil -Lsrc/libutil -lnixutil
ld: src/libstore/binary-cache-store.o: in function `nix::BinaryCacheStore::BinaryCacheStore(
std::map<std::__cxx11::basic_string<char, std::char_traits<char>, ...
nix/src/libstore/binary-cache-store.cc:30: undefined reference to `nix::readFile(
std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)' ...
...
```
This happens due to `-L/usr/lib64 -Lsrc/libutil` search path ordering.
The change turns it into `-Lsrc/libutil -L/usr/lib64`.
Closes: https://github.com/NixOS/nix/issues/3087
Noticed this minor logging deficiency when debugged --disable-shared
build:
LD
AR
LD
CXX src/libstore/local-store.o
After the change build is logged as expected:
LD src/libmain/libnixmain.a
LD src/libfetchers/libnixfetchers.a
AR src/libmain/libnixmain.a
CXX src/libstore/local-store.o
The link failure happens on a system with stable nix-2.3.15
installed in /usr/lib64 (it's libutil.so API differs from master):
```
LANG=C make V=1
g++ -o /home/slyfox/dev/git/nix/src/libstore/libnixstore.so \
-shared -L/usr/lib64 -Wl,--no-copy-dt-needed-entries \
src/libstore/binary-cache-store.o ... src/libstore/uds-remote-store.o \
-lsqlite3 -lcurl -lsodium -pthread -ldl -lseccomp -Wl,-z,defs -Wl,-soname=libnixstore.so
-Wl,-rpath,/home/slyfox/dev/git/nix/src/libutil -Lsrc/libutil -lnixutil
ld: src/libstore/binary-cache-store.o: in function `nix::BinaryCacheStore::BinaryCacheStore(
std::map<std::__cxx11::basic_string<char, std::char_traits<char>, ...
nix/src/libstore/binary-cache-store.cc:30: undefined reference to `nix::readFile(
std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)' ...
...
```
This happens due to `-L/usr/lib64 -Lsrc/libutil` search path ordering.
The change turns it into `-Lsrc/libutil -L/usr/lib64`.
Closes: https://github.com/NixOS/nix/issues/3087
Previously, the build system used uname(1) output when it wanted to
check the operating system it was being built for, which meant that it
didn't take into-account cross-compilation when the build and host
operating systems were different.
To fix this, instead of consulting uname output, we consult the host
triple, specifically the third "kernel" part.
For "kernel"s with stable ABIs, like Linux or Cygwin, we can use a
simple ifeq to test whether we're compiling for that system, but for
other platforms, like Darwin, FreeBSD, or Solaris, we have to use a
more complicated check to take into account the version numbers at the
end of the "kernel"s. I couldn't find a way to just strip these
version numbers in GNU Make without shelling out, which would be even
more ugly IMO. Because these checks differ between kernels, and the
patsubst ones are quite fiddly, I've added variables for each host OS
we might want to check to make them easier to reuse.
Requires a slight update to the test infra to work properly, but
having the possibility to group tests that way makes the whole thing
quite cleaner imho
