mirror of
https://github.com/embassy-rs/embassy.git
synced 2024-11-22 06:42:32 +00:00
39 lines
3.4 KiB
Markdown
39 lines
3.4 KiB
Markdown
# Embassy STM32 HAL
|
||
|
||
The embassy-stm32 HAL aims to provide a safe, idiomatic hardware abstraction layer for all STM32 families. The HAL implements both blocking and async APIs for many peripherals. Where appropriate, traits from both blocking and asynchronous versions of [embedded-hal](https://docs.rs/embedded-hal/latest/embedded_hal/) v0.2 and v1.0 are implemented, as well as serial traits from embedded-io\[-async].
|
||
|
||
* [embassy-stm32 on crates.io](https://crates.io/crates/embassy-stm32)
|
||
* [Documentation](https://docs.embassy.dev/embassy-stm32/) (**Important:** use docs.embassy.dev rather than docs.rs to see the specific docs for the chip you’re using!)
|
||
* [Source](https://github.com/embassy-rs/embassy/tree/main/embassy-stm32)
|
||
* [Examples](https://github.com/embassy-rs/embassy/tree/main/examples)
|
||
|
||
## embassy-stm32 supports all STM32 chip families
|
||
|
||
STM32 microcontrollers come in many families and flavors, and supporting all of them is a big undertaking. Embassy takes advantage of the fact that the STM32 peripheral versions are shared across chip families. For example, instead of re-implementing the SPI peripheral for every STM32 chip family, embassy has a single SPI implementation that depends on code-generated register types that are identical for STM32 families with the same version of a given peripheral.
|
||
|
||
In practice, this works as follows:
|
||
|
||
1. You tell the compiler which chip you’re using with a feature flag
|
||
1. The stm32-metapac module generates register types for that chip at compile time, based on data from the stm32-data module
|
||
1. The embassy-stm32 HAL picks the correct implementation each peripheral based on automatically-generated feature flags, and applies any other tweaks which are required for the HAL to work on that chip
|
||
|
||
Be aware that, while embassy-stm32 strives to consistently support all peripherals across all chips, this approach can lead to slightly different APIs and capabilities being available on different families. Check the [documentation](https://docs.embassy.dev/embassy-stm32/) for the specific chip you’re using to confirm exactly what’s available.
|
||
|
||
## Embedded-hal
|
||
|
||
The `embassy-stm32` HAL implements the traits from [embedded-hal](https://crates.io/crates/embedded-hal) (v0.2 and 1.0) and [embedded-hal-async](https://crates.io/crates/embedded-hal-async), as well as [embedded-io](https://crates.io/crates/embedded-io) and [embedded-io-async](https://crates.io/crates/embedded-io-async).
|
||
|
||
## `embassy-time` time driver
|
||
If a `time-driver-*` feature is enabled, embassy-stm32 provides a time driver for use with [embassy-time](https://docs.embassy.dev/embassy-time/). You can pick which hardware timer is used for this internally via the `time-driver-tim*` features, or let embassy pick with `time-driver-any`.
|
||
|
||
embassy-time has a default tick rate of 1MHz, which is fast enough to cause problems with the 16-bit timers currently supported by the embassy-stm32 time driver (specifically, if a critical section delays an IRQ by more than 32ms). To avoid this, it’s recommended to pick a lower tick rate. 32.768kHz is a reasonable default for many purposes.
|
||
|
||
## Interoperability
|
||
|
||
This crate can run on any executor.
|
||
|
||
Optionally, some features requiring [`embassy-time`](https://crates.io/crates/embassy-time) can be activated with the `time` feature. If you enable it,
|
||
you must link an `embassy-time` driver in your project.
|
||
|
||
The `low-power` feature integrates specifically with `embassy-executor`, it can't be used on other executors for now.
|