% Rust Reference Manual # Introduction This document is the reference manual for the Rust programming language. It provides three kinds of material: - Chapters that formally define the language grammar and, for each construct, informally describe its semantics and give examples of its use. - Chapters that informally describe the memory model, concurrency model, runtime services, linkage model and debugging facilities. - Appendix chapters providing rationale and references to languages that influenced the design. This document does not serve as a tutorial introduction to the language. Background familiarity with the language is assumed. A separate tutorial document is available at to help acquire such background familiarity. This document also does not serve as a reference to the core or standard libraries included in the language distribution. Those libraries are documented separately by extracting documentation attributes from their source code. Formatted documentation can be found at the following locations: - Core library: - Standard library: ## Disclaimer Rust is a work in progress. The language continues to evolve as the design shifts and is fleshed out in working code. Certain parts work, certain parts do not, certain parts will be removed or changed. This manual is a snapshot written in the present tense. All features described exist in working code unless otherwise noted, but some are quite primitive or remain to be further modified by planned work. Some may be temporary. It is a *draft*, and we ask that you not take anything you read here as final. If you have suggestions to make, please try to focus them on *reductions* to the language: possible features that can be combined or omitted. We aim to keep the size and complexity of the language under control. **Note on grammar:** The grammar for Rust given in this document is rough and very incomplete; only a modest number of sections have accompanying grammar rules. Formalizing the grammar accepted by the Rust parser is ongoing work, but future versions of this document will contain a complete grammar. Moreover, we hope that this grammar will be extracted and verified as LL(1) by an automated grammar-analysis tool, and further tested against the Rust sources. Preliminary versions of this automation exist, but are not yet complete. # Notation Rust's grammar is defined over Unicode codepoints, each conventionally denoted `U+XXXX`, for 4 or more hexadecimal digits `X`. _Most_ of Rust's grammar is confined to the ASCII range of Unicode, and is described in this document by a dialect of Extended Backus-Naur Form (EBNF), specifically a dialect of EBNF supported by common automated LL(k) parsing tools such as `llgen`, rather than the dialect given in ISO 14977. The dialect can be defined self-referentially as follows: ~~~~~~~~ {.ebnf .notation} grammar : rule + ; rule : nonterminal ':' productionrule ';' ; productionrule : production [ '|' production ] * ; production : term * ; term : element repeats ; element : LITERAL | IDENTIFIER | '[' productionrule ']' ; repeats : [ '*' | '+' ] NUMBER ? | NUMBER ? | '?' ; ~~~~~~~~ Where: - Whitespace in the grammar is ignored. - Square brackets are used to group rules. - `LITERAL` is a single printable ASCII character, or an escaped hexadecimal ASCII code of the form `\xQQ`, in single quotes, denoting the corresponding Unicode codepoint `U+00QQ`. - `IDENTIFIER` is a nonempty string of ASCII letters and underscores. - The `repeat` forms apply to the adjacent `element`, and are as follows: - `?` means zero or one repetition - `*` means zero or more repetitions - `+` means one or more repetitions - NUMBER trailing a repeat symbol gives a maximum repetition count - NUMBER on its own gives an exact repetition count This EBNF dialect should hopefully be familiar to many readers. ## Unicode productions A small number of productions in Rust's grammar permit Unicode codepoints outside the ASCII range; these productions are defined in terms of character properties given by the Unicode standard, rather than ASCII-range codepoints. These are given in the section [Special Unicode Productions](#special-unicode-productions). ## String table productions Some rules in the grammar -- notably [unary operators](#unary-operator-expressions), [binary operators](#binary-operator-expressions), and [keywords](#keywords) -- are given in a simplified form: as a listing of a table of unquoted, printable whitespace-separated strings. These cases form a subset of the rules regarding the [token](#tokens) rule, and are assumed to be the result of a lexical-analysis phase feeding the parser, driven by a DFA, operating over the disjunction of all such string table entries. When such a string enclosed in double-quotes (`"`) occurs inside the grammar, it is an implicit reference to a single member of such a string table production. See [tokens](#tokens) for more information. # Lexical structure ## Input format Rust input is interpreted as a sequence of Unicode codepoints encoded in UTF-8. No normalization is performed during input processing. Most Rust grammar rules are defined in terms of printable ASCII-range codepoints, but a small number are defined in terms of Unicode properties or explicit codepoint lists. ^[Surrogate definitions for the special Unicode productions are provided to the grammar verifier, restricted to ASCII range, when verifying the grammar in this document.] ## Special Unicode Productions The following productions in the Rust grammar are defined in terms of Unicode properties: `ident`, `non_null`, `non_star`, `non_eol`, `non_slash`, `non_single_quote` and `non_double_quote`. ### Identifiers The `ident` production is any nonempty Unicode string of the following form: - The first character has property `XID_start` - The remaining characters have property `XID_continue` that does _not_ occur in the set of [keywords](#keywords). Note: `XID_start` and `XID_continue` as character properties cover the character ranges used to form the more familiar C and Java language-family identifiers. ### Delimiter-restricted productions Some productions are defined by exclusion of particular Unicode characters: - `non_null` is any single Unicode character aside from `U+0000` (null) - `non_eol` is `non_null` restricted to exclude `U+000A` (`'\n'`) - `non_star` is `non_null` restricted to exclude `U+002A` (`*`) - `non_slash` is `non_null` restricted to exclude `U+002F` (`/`) - `non_single_quote` is `non_null` restricted to exclude `U+0027` (`'`) - `non_double_quote` is `non_null` restricted to exclude `U+0022` (`"`) ## Comments ~~~~~~~~ {.ebnf .gram} comment : block_comment | line_comment ; block_comment : "/*" block_comment_body * "*/" ; block_comment_body : block_comment | non_star * | '*' non_slash ; line_comment : "//" non_eol * ; ~~~~~~~~ Comments in Rust code follow the general C++ style of line and block-comment forms, with proper nesting of block-comment delimiters. Comments are interpreted as a form of whitespace. ## Whitespace ~~~~~~~~ {.ebnf .gram} whitespace_char : '\x20' | '\x09' | '\x0a' | '\x0d' ; whitespace : [ whitespace_char | comment ] + ; ~~~~~~~~ The `whitespace_char` production is any nonempty Unicode string consisting of any of the following Unicode characters: `U+0020` (space, `' '`), `U+0009` (tab, `'\t'`), `U+000A` (LF, `'\n'`), `U+000D` (CR, `'\r'`). Rust is a "free-form" language, meaning that all forms of whitespace serve only to separate _tokens_ in the grammar, and have no semantic significance. A Rust program has identical meaning if each whitespace element is replaced with any other legal whitespace element, such as a single space character. ## Tokens ~~~~~~~~ {.ebnf .gram} simple_token : keyword | unop | binop ; token : simple_token | ident | literal | symbol | whitespace token ; ~~~~~~~~ Tokens are primitive productions in the grammar defined by regular (non-recursive) languages. "Simple" tokens are given in [string table production](#string-table-productions) form, and occur in the rest of the grammar as double-quoted strings. Other tokens have exact rules given. ### Keywords The keywords in [crate files](#crate-files) are the following strings: ~~~~~~~~ {.keyword} import export use mod ~~~~~~~~ The keywords in [source files](#source-files) are the following strings: ~~~~~~~~ {.keyword} again assert break check const copy drop else enum export extern fail false fn for if impl import let log loop match mod mut pure return struct true trait type unchecked unsafe while ~~~~~~~~ Any of these have special meaning in their respective grammars, and are excluded from the `ident` rule. ### Literals A literal is an expression consisting of a single token, rather than a sequence of tokens, that immediately and directly denotes the value it evaluates to, rather than referring to it by name or some other evaluation rule. A literal is a form of constant expression, so is evaluated (primarily) at compile time. ~~~~~~~~ {.ebnf .gram} literal : string_lit | char_lit | num_lit ; ~~~~~~~~ #### Character and string literals ~~~~~~~~ {.ebnf .gram} char_lit : '\x27' char_body '\x27' ; string_lit : '"' string_body * '"' ; char_body : non_single_quote | '\x5c' [ '\x27' | common_escape ] ; string_body : non_double_quote | '\x5c' [ '\x22' | common_escape ] ; common_escape : '\x5c' | 'n' | 'r' | 't' | 'x' hex_digit 2 | 'u' hex_digit 4 | 'U' hex_digit 8 ; hex_digit : 'a' | 'b' | 'c' | 'd' | 'e' | 'f' | 'A' | 'B' | 'C' | 'D' | 'E' | 'F' | dec_digit ; dec_digit : '0' | nonzero_dec ; nonzero_dec: '1' | '2' | '3' | '4' | '5' | '6' | '7' | '8' | '9' ; ~~~~~~~~ A _character literal_ is a single Unicode character enclosed within two `U+0027` (single-quote) characters, with the exception of `U+0027` itself, which must be _escaped_ by a preceding U+005C character (`\`). A _string literal_ is a sequence of any Unicode characters enclosed within two `U+0022` (double-quote) characters, with the exception of `U+0022` itself, which must be _escaped_ by a preceding `U+005C` character (`\`). Some additional _escapes_ are available in either character or string literals. An escape starts with a `U+005C` (`\`) and continues with one of the following forms: * An _8-bit codepoint escape_ escape starts with `U+0078` (`x`) and is followed by exactly two _hex digits_. It denotes the Unicode codepoint equal to the provided hex value. * A _16-bit codepoint escape_ starts with `U+0075` (`u`) and is followed by exactly four _hex digits_. It denotes the Unicode codepoint equal to the provided hex value. * A _32-bit codepoint escape_ starts with `U+0055` (`U`) and is followed by exactly eight _hex digits_. It denotes the Unicode codepoint equal to the provided hex value. * A _whitespace escape_ is one of the characters `U+006E` (`n`), `U+0072` (`r`), or `U+0074` (`t`), denoting the unicode values `U+000A` (LF), `U+000D` (CR) or `U+0009` (HT) respectively. * The _backslash escape_ is the character U+005C (`\`) which must be escaped in order to denote *itself*. #### Number literals ~~~~~~~~ {.ebnf .gram} num_lit : nonzero_dec [ dec_digit | '_' ] * num_suffix ? | '0' [ [ dec_digit | '_' ] + num_suffix ? | 'b' [ '1' | '0' | '_' ] + int_suffix ? | 'x' [ hex_digit | '-' ] + int_suffix ? ] ; num_suffix : int_suffix | float_suffix ; int_suffix : 'u' int_suffix_size ? | 'i' int_suffix_size ; int_suffix_size : [ '8' | '1' '6' | '3' '2' | '6' '4' ] ; float_suffix : [ exponent | '.' dec_lit exponent ? ] float_suffix_ty ? ; float_suffix_ty : 'f' [ '3' '2' | '6' '4' ] ; exponent : ['E' | 'e'] ['-' | '+' ] ? dec_lit ; dec_lit : [ dec_digit | '_' ] + ; ~~~~~~~~ A _number literal_ is either an _integer literal_ or a _floating-point literal_. The grammar for recognizing the two kinds of literals is mixed, as they are differentiated by suffixes. ##### Integer literals An _integer literal_ has one of three forms: * A _decimal literal_ starts with a *decimal digit* and continues with any mixture of *decimal digits* and _underscores_. * A _hex literal_ starts with the character sequence `U+0030` `U+0078` (`0x`) and continues as any mixture hex digits and underscores. * A _binary literal_ starts with the character sequence `U+0030` `U+0062` (`0b`) and continues as any mixture binary digits and underscores. An integer literal may be followed (immediately, without any spaces) by an _integer suffix_, which changes the type of the literal. There are two kinds of integer literal suffix: * The `i` and `u` suffixes give the literal type `int` or `uint`, respectively. * Each of the signed and unsigned machine types `u8`, `i8`, `u16`, `i16`, `u32`, `i32`, `u64` and `i64` give the literal the corresponding machine type. The type of an _unsuffixed_ integer literal is determined by type inference. If a integer type can be _uniquely_ determined from the surrounding program context, the unsuffixed integer literal has that type. If the program context underconstrains the type, the unsuffixed integer literal's type is `int`; if the program context overconstrains the type, it is considered a static type error. Examples of integer literals of various forms: ~~~~ 123; 0xff00; // type determined by program context // defaults to int in absence of type // information 123u; // type uint 123_u; // type uint 0xff_u8; // type u8 0b1111_1111_1001_0000_i32; // type i32 ~~~~ ##### Floating-point literals A _floating-point literal_ has one of two forms: * Two _decimal literals_ separated by a period character `U+002E` (`.`), with an optional _exponent_ trailing after the second decimal literal. * A single _decimal literal_ followed by an _exponent_. By default, a floating-point literal is of type `float`. A floating-point literal may be followed (immediately, without any spaces) by a _floating-point suffix_, which changes the type of the literal. There are three floating-point suffixes: `f` (for the base `float` type), `f32`, and `f64` (the 32-bit and 64-bit floating point types). Examples of floating-point literals of various forms: ~~~~ 123.0; // type float 0.1; // type float 3f; // type float 0.1f32; // type f32 12E+99_f64; // type f64 ~~~~ ##### Nil and boolean literals The _nil value_, the only value of the type by the same name, is written as `()`. The two values of the boolean type are written `true` and `false`. ### Symbols ~~~~~~~~ {.ebnf .gram} symbol : "::" "->" | '#' | '[' | ']' | '(' | ')' | '{' | '}' | ',' | ';' ; ~~~~~~~~ Symbols are a general class of printable [token](#tokens) that play structural roles in a variety of grammar productions. They are catalogued here for completeness as the set of remaining miscellaneous printable tokens that do not otherwise appear as [unary operators](#unary-operator-expressions), [binary operators](#binary-operator-expressions), or [keywords](#keywords). ## Paths ~~~~~~~~ {.ebnf .gram} expr_path : ident [ "::" expr_path_tail ] + ; expr_path_tail : '<' type_expr [ ',' type_expr ] + '>' | expr_path ; type_path : ident [ type_path_tail ] + ; type_path_tail : '<' type_expr [ ',' type_expr ] + '>' | "::" type_path ; ~~~~~~~~ A _path_ is a sequence of one or more path components _logically_ separated by a namespace qualifier (`::`). If a path consists of only one component, it may refer to either an [item](#items) or a [slot](#memory-slots) in a local control scope. If a path has multiple components, it refers to an item. Every item has a _canonical path_ within its crate, but the path naming an item is only meaningful within a given crate. There is no global namespace across crates; an item's canonical path merely identifies it within the crate. Two examples of simple paths consisting of only identifier components: ~~~~{.ignore} x; x::y::z; ~~~~ Path components are usually [identifiers](#identifiers), but the trailing component of a path may be an angle-bracket-enclosed list of type arguments. In [expression](#expressions) context, the type argument list is given after a final (`::`) namespace qualifier in order to disambiguate it from a relational expression involving the less-than symbol (`<`). In type expression context, the final namespace qualifier is omitted. Two examples of paths with type arguments: ~~~~ # import std::map; # fn f() { # fn id(t: T) -> T { t } type t = map::hashmap; // Type arguments used in a type expression let x = id::(10); // Type arguments used in a call expression # } ~~~~ # Syntax extensions A number of minor features of Rust are not central enough to have their own syntax, and yet are not implementable as functions. Instead, they are given names, and invoked through a consistent syntax: `name!(...)`. Examples include: * `fmt!` : format data into a string * `env!` : look up an environment variable's value at compile time * `stringify!` : pretty-print the Rust expression given as an argument * `proto!` : define a protocol for inter-task communication * `include!` : include the Rust expression in the given file * `include_str!` : include the contents of the given file as a string * `include_bin!` : include the contents of the given file as a binary blob * `error!`, `warn!`, `info!`, `debug!` : provide diagnostic information. All of the above extensions, with the exception of `proto!`, are expressions with values. `proto!` is an item, defining a new name. ## Macros User-defined syntax extensions are called "macros", and they can be defined with the `macro_rules!` syntax extension. User-defined macros can currently only be invoked in expression position. ~~~~ {.ebnf .gram} expr_macro_rules : "macro_rules" '!' ident '(' macro_rule * ')' macro_rule : '(' matcher * ')' "=>" '(' transcriber * ')' ';' matcher : '(' matcher * ')' | '[' matcher * ']' | '{' matcher * '}' | '$' ident ':' ident | '$' '(' matcher * ')' sep_token? [ '*' | '+' ] | non_special_token transcriber : '(' transcriber * ')' | '[' transcriber * ']' | '{' transcriber * '}' | '$' ident | '$' '(' transcriber * ')' sep_token? [ '*' | '+' ] | non_special_token ~~~~ (A `sep_token` is any token other than `*` and `+`. A `non_special_token` is any token other than a delimiter or `$`.) Macro invocations are looked up by name, and each macro rule is tried in turn; the first successful match is transcribed. The matching and transcribing processes are close cousins, and will be described together: ### Macro By Example Everything that does not begin with a `$` is matched and transcirbed literally, including delimiters. For parsing reasons, they must be matched, but they are otherwise not special. In the matcher, `$` _name_ `:` _designator_ matches the nonterminal in the Rust syntax named by _designator_. Valid designators are `item`, `block`, `stmt`, `pat`, `expr`, `ty`, `ident`, `path`, `tt`, `matchers`. The last two are the right-hand side and the left-hand side respectively of the `=>` in macro rules. In the transcriber, the designator is already known, and so only the name of a matched nonterminal comes after the dollar sign. In bothe the matcher and transcriber, the Kleene star-like operator, consisting of `$` and parens, optionally followed by a separator token, followed by `*` or `+`, indicates repetition. (`*` means zero or more repetitions, `+` means at least one repetition. The parens are not matched or transcribed). On the matcher side, a name is bound to _all_ of the names it matches, in a structure that mimics the structure of the repetition encountered on a successful match. The job of the transcriber is to sort that structure out. The rules for transcription of these repetitions are called "Macro By Example". Essentially, one "layer" of repetition is discharged at a time, and all of them must be discharged by the time a name is transcribed. Therefore, `( $( $i:ident ),* ) => ( $i )` is an invalid macro, but `( $( $i:ident ),* ) => ( $( $i:ident ),* )` is acceptable (if trivial). When Macro By Example encounters a repetition, it examines all of the `$` _name_ s that occur in its body. At the "current layer", they all must repeat the same number of times, so ` ( $( $i:ident ),* ; $( $j:ident ),* ) => ( $( ($i,$j) ),* )` is valid if given the argument `(a,b,c ; d,e,f)`, but not `(a,b,c ; d,e)`. The repetition walks through the choices at that layer in lockstep, so the former input transcribes to `( (a,d), (b,e), (c,f) )`. Nested repetitions are allowed. ### Parsing limitations The parser used by the macro system is reasonably powerful, but the parsing of Rust syntax is restricted in two ways: 1. The parser will always parse as much as possible. If it attempts to match `$i:expr [ , ]` against `8 [ , ]`, it will attempt to parse `i` as an array index operation and fail. Adding a separator can solve this problem. 2. The parser must have eliminated all ambiguity by the time it reaches a `$` _name_ `:` _designator_. This most often affects them when they occur in the beginning of, or immediately after, a `$(...)*`; requiring a distinctive token in front can solve the problem. ## Syntax extensions useful for the macro author * `log_syntax!` : print out the arguments at compile time * `trace_macros!` : supply `true` or `false` to enable or disable printing of the macro expansion process. * `ident_to_str!` : turns the identifier argument into a string literal * `concat_idents!` : creates a new identifier by concatenating its arguments # Crates and source files Rust is a *compiled* language. Its semantics are divided along a *phase distinction* between compile-time and run-time. Those semantic rules that have a *static interpretation* govern the success or failure of compilation. A program that fails to compile due to violation of a compile-time rule has no defined semantics at run-time; the compiler should halt with an error report, and produce no executable artifact. The compilation model centres on artifacts called _crates_. Each compilation is directed towards a single crate in source form, and if successful, produces a single crate in binary form: either an executable or a library. A _crate_ is a unit of compilation and linking, as well as versioning, distribution and runtime loading. A crate contains a _tree_ of nested [module](#modules) scopes. The top level of this tree is a module that is anonymous -- from the point of view of paths within the module -- and any item within a crate has a canonical [module path](#paths) denoting its location within the crate's module tree. Crates are provided to the Rust compiler through two kinds of file: - _crate files_, that end in `.rc` and each define a `crate`. - _source files_, that end in `.rs` and each define a `module`. The Rust compiler is always invoked with a single input file, and always produces a single output crate. When the Rust compiler is invoked with a crate file, it reads the _explicit_ definition of the crate it's compiling from that file, and populates the crate with modules derived from all the source files referenced by the crate, reading and processing all the referenced modules at once. When the Rust compiler is invoked with a source file, it creates an _implicit_ crate and treats the source file as though it was referenced as the sole module populating this implicit crate. The module name is derived from the source file name, with the `.rs` extension removed. ## Crate files ~~~~~~~~ {.ebnf .gram} crate : attribute [ ';' | attribute* directive ] | directive ; directive : view_item | dir_directive | source_directive ; ~~~~~~~~ A crate file contains a crate definition, for which the production above defines the grammar. It is a declarative grammar that guides the compiler in assembling a crate from component source files.^[A crate is somewhat analogous to an *assembly* in the ECMA-335 CLI model, a *library* in the SML/NJ Compilation Manager, a *unit* in the Owens and Flatt module system, or a *configuration* in Mesa.] A crate file describes: * [Attributes](#attributes) about the crate, such as author, name, version, and copyright. These are used for linking, versioning and distributing crates. * The source-file and directory modules that make up the crate. * Any `use`, `import` or `export` [view items](#view-items) that apply to the anonymous module at the top-level of the crate's module tree. An example of a crate file: ~~~~~~~~{.xfail-test} // Linkage attributes #[ link(name = "projx" vers = "2.5", uuid = "9cccc5d5-aceb-4af5-8285-811211826b82") ]; // Additional metadata attributes #[ desc = "Project X", license = "BSD" ]; author = "Jane Doe" ]; // Import a module. use std (ver = "1.0"); // Define some modules. #[path = "foo.rs"] mod foo; mod bar { #[path = "quux.rs"] mod quux; } ~~~~~~~~ ### Dir directives A `dir_directive` forms a module in the module tree making up the crate, as well as implicitly relating that module to a directory in the filesystem containing source files and/or further subdirectories. The filesystem directory associated with a `dir_directive` module can either be explicit, or if omitted, is implicitly the same name as the module. A `source_directive` references a source file, either explicitly or implicitly by combining the module name with the file extension `.rs`. The module contained in that source file is bound to the module path formed by the `dir_directive` modules containing the `source_directive`. ## Source files A source file contains a `module`: that is, a sequence of zero or more `item` definitions. Each source file is an implicit module, the name and location of which -- in the module tree of the current crate -- is defined from outside the source file: either by an explicit `source_directive` in a referencing crate file, or by the filename of the source file itself. A source file that contains a `main` function can be compiled to an executable. If a `main` function is present, it must have no [type parameters](#type-parameters) and no [constraints](#constraints). Its return type must be [`nil`](#primitive-types) and it must either have no arguments, or a single argument of type `[~str]`. # Items and attributes A crate is a collection of [items](#items), each of which may have some number of [attributes](#attributes) attached to it. ## Items ~~~~~~~~ {.ebnf .gram} item : mod_item | fn_item | type_item | enum_item | res_item | trait_item | impl_item | foreign_mod_item ; ~~~~~~~~ An _item_ is a component of a crate; some module items can be defined in crate files, but most are defined in source files. Items are organized within a crate by a nested set of [modules](#modules). Every crate has a single "outermost" anonymous module; all further items within the crate have [paths](#paths) within the module tree of the crate. Items are entirely determined at compile-time, remain constant during execution, and may reside in read-only memory. There are several kinds of item: * [modules](#modules) * [functions](#functions) * [type definitions](#type-definitions) * [enumerations](#enumerations) * [resources](#resources) * [traits](#traits) * [implementations](#implementations) Some items form an implicit scope for the declaration of sub-items. In other words, within a function or module, declarations of items can (in many cases) be mixed with the statements, control blocks, and similar artifacts that otherwise compose the item body. The meaning of these scoped items is the same as if the item was declared outside the scope -- it is still a static item -- except that the item's *path name* within the module namespace is qualified by the name of the enclosing item, or is private to the enclosing item (in the case of functions). The exact locations in which sub-items may be declared is given by the grammar. ### Type Parameters All items except modules may be *parametrized* by type. Type parameters are given as a comma-separated list of identifiers enclosed in angle brackets (`<...>`), after the name of the item and before its definition. The type parameters of an item are considered "part of the name", not the type of the item; in order to refer to the type-parametrized item, a referencing [path](#paths) must in general provide type arguments as a list of comma-separated types enclosed within angle brackets. In practice, the type-inference system can usually infer such argument types from context. There are no general type-parametric types, only type-parametric items. ### Modules ~~~~~~~~ {.ebnf .gram} mod_item : "mod" ident '{' mod '}' ; mod : [ view_item | item ] * ; ~~~~~~~~ A module is a container for zero or more [view items](#view-items) and zero or more [items](#items). The view items manage the visibility of the items defined within the module, as well as the visibility of names from outside the module when referenced from inside the module. A _module item_ is a module, surrounded in braces, named, and prefixed with the keyword `mod`. A module item introduces a new, named module into the tree of modules making up a crate. Modules can nest arbitrarily. An example of a module: ~~~~~~~~ mod math { type complex = (f64, f64); fn sin(f: f64) -> f64 { // ... # fail; } fn cos(f: f64) -> f64 { // ... # fail; } fn tan(f: f64) -> f64 { // ... # fail; } } ~~~~~~~~ #### View items ~~~~~~~~ {.ebnf .gram} view_item : use_decl | import_decl | export_decl ; ~~~~~~~~ A view item manages the namespace of a module; it does not define new items but simply changes the visibility of other items. There are several kinds of view item: * [use declarations](#use-declarations) * [import declarations](#import-declarations) * [export declarations](#export-declarations) ##### Use declarations ~~~~~~~~ {.ebnf .gram} use_decl : "use" ident [ '(' link_attrs ')' ] ? ; link_attrs : link_attr [ ',' link_attrs ] + ; link_attr : ident '=' literal ; ~~~~~~~~ A _use declaration_ specifies a dependency on an external crate. The external crate is then imported into the declaring scope as the `ident` provided in the `use_decl`. The external crate is resolved to a specific `soname` at compile time, and a runtime linkage requirement to that `soname` is passed to the linker for loading at runtime. The `soname` is resolved at compile time by scanning the compiler's library path and matching the `link_attrs` provided in the `use_decl` against any `#link` attributes that were declared on the external crate when it was compiled. If no `link_attrs` are provided, a default `name` attribute is assumed, equal to the `ident` given in the `use_decl`. Two examples of `use` declarations: ~~~~~~~~{.xfail-test} use pcre (uuid = "54aba0f8-a7b1-4beb-92f1-4cf625264841"); use std; // equivalent to: use std ( name = "std" ); use ruststd (name = "std"); // linking to 'std' under another name ~~~~~~~~ ##### Import declarations ~~~~~~~~ {.ebnf .gram} import_decl : "import" ident [ '=' path | "::" path_glob ] ; path_glob : ident [ "::" path_glob ] ? | '*' | '{' ident [ ',' ident ] * '}' ~~~~~~~~ An _import declaration_ creates one or more local name bindings synonymous with some other [path](#paths). Usually an import declaration is used to shorten the path required to refer to a module item. *Note*: unlike many languages, Rust's `import` declarations do *not* declare linkage-dependency with external crates. Linkage dependencies are independently declared with [`use` declarations](#use-declarations). Imports support a number of "convenience" notations: * Importing as a different name than the imported name, using the syntax `import x = p::q::r;`. * Importing a list of paths differing only in final element, using the glob-like brace syntax `import a::b::{c,d,e,f};` * Importing all paths matching a given prefix, using the glob-like asterisk syntax `import a::b::*;` An example of imports: ~~~~ import foo = core::info; import core::float::sin; import core::str::{slice, to_upper}; import core::option::Some; fn main() { // Equivalent to 'log(core::info, core::float::sin(1.0));' log(foo, sin(1.0)); // Equivalent to 'log(core::info, core::option::Some(1.0));' log(info, Some(1.0)); // Equivalent to 'log(core::info, // core::str::to_upper(core::str::slice(~"foo", 0u, 1u)));' log(info, to_upper(slice(~"foo", 0u, 1u))); } ~~~~ ##### Export declarations ~~~~~~~~ {.ebnf .gram} export_decl : "export" ident [ ',' ident ] * | "export" ident "::{}" | "export" ident '{' ident [ ',' ident ] * '}' ; ~~~~~~~~ An _export declaration_ restricts the set of local names within a module that can be accessed from code outside the module. By default, all _local items_ in a module are exported; imported paths are not automatically re-exported by default. If a module contains an explicit `export` declaration, this declaration replaces the default export with the export specified. An example of an export: ~~~~~~~~ mod foo { export primary; fn primary() { helper(1, 2); helper(3, 4); } fn helper(x: int, y: int) { // ... } } fn main() { foo::primary(); // Will compile. } ~~~~~~~~ If, instead of calling `foo::primary` in main, you were to call `foo::helper` then it would fail to compile: ~~~~~~~~{.ignore} foo::helper(2,3) // ERROR: will not compile. ~~~~~~~~ Multiple names may be exported from a single export declaration: ~~~~~~~~ mod foo { export primary, secondary; fn primary() { helper(1, 2); helper(3, 4); } fn secondary() { // ... } fn helper(x: int, y: int) { // ... } } ~~~~~~~~ When exporting the name of an `enum` type `t`, by default, the module does *not* implicitly export any of `t`'s constructors. For example: ~~~~~~~~ mod foo { export t; enum t {a, b, c} } ~~~~~~~~ Here, `foo` imports `t`, but not `a`, `b`, and `c`. ### Functions A _function item_ defines a sequence of [statements](#statements) and an optional final [expression](#expressions) associated with a name and a set of parameters. Functions are declared with the keyword `fn`. Functions declare a set of *input* [*slots*](#memory-slots) as parameters, through which the caller passes arguments into the function, and an *output* [*slot*](#memory-slots) through which the function passes results back to the caller. A function may also be copied into a first class *value*, in which case the value has the corresponding [*function type*](#function-types), and can be used otherwise exactly as a function item (with a minor additional cost of calling the function indirectly). Every control path in a function logically ends with a `return` expression or a diverging expression. If the outermost block of a function has a value-producing expression in its final-expression position, that expression is interpreted as an implicit `return` expression applied to the final-expression. An example of a function: ~~~~ fn add(x: int, y: int) -> int { return x + y; } ~~~~ #### Diverging functions A special kind of function can be declared with a `!` character where the output slot type would normally be. For example: ~~~~ fn my_err(s: ~str) -> ! { log(info, s); fail; } ~~~~ We call such functions "diverging" because they never return a value to the caller. Every control path in a diverging function must end with a [`fail`](#fail-expressions) or a call to another diverging function on every control path. The `!` annotation does *not* denote a type. Rather, the result type of a diverging function is a special type called $\bot$ ("bottom") that unifies with any type. Rust has no syntax for $\bot$. It might be necessary to declare a diverging function because as mentioned previously, the typechecker checks that every control path in a function ends with a [`return`](#return-expressions) or diverging expression. So, if `my_err` were declared without the `!` annotation, the following code would not typecheck: ~~~~ # fn my_err(s: ~str) -> ! { fail } fn f(i: int) -> int { if i == 42 { return 42; } else { my_err(~"Bad number!"); } } ~~~~ The typechecker would complain that `f` doesn't return a value in the `else` branch. Adding the `!` annotation on `my_err` would express that `f` requires no explicit `return`, as if it returns control to the caller, it returns a value (true because it never returns control). #### Pure functions A pure function declaration is identical to a function declaration, except that it is declared with the additional keyword `pure`. In addition, the typechecker checks the body of a pure function with a restricted set of typechecking rules. A pure function * may not contain an assignment or self-call expression; and * may only call other pure functions, not general functions. An example of a pure function: ~~~~ pure fn lt_42(x: int) -> bool { return (x < 42); } ~~~~ Pure functions may call other pure functions: ~~~~{.xfail-test} pure fn pure_length(ls: list) -> uint { /* ... */ } pure fn nonempty_list(ls: list) -> bool { pure_length(ls) > 0u } ~~~~ *TODO:* should actually define referential transparency. The effect checking rules previously enumerated are a restricted set of typechecking rules meant to approximate the universe of observably referentially transparent Rust procedures conservatively. Sometimes, these rules are *too* restrictive. Rust allows programmers to violate these rules by writing pure functions that the compiler cannot prove to be referentially transparent, using an escape-hatch feature called "unchecked blocks". When writing code that uses unchecked blocks, programmers should always be aware that they have an obligation to show that the code *behaves* referentially transparently at all times, even if the compiler cannot *prove* automatically that the code is referentially transparent. In the presence of unchecked blocks, the compiler provides no static guarantee that the code will behave as expected at runtime. Rather, the programmer has an independent obligation to verify the semantics of the pure functions they write. *TODO:* last two sentences are vague. An example of a pure function that uses an unchecked block: ~~~~ # import std::list::*; fn pure_foldl(ls: list, u: U, f: fn(&&T, &&U) -> U) -> U { match ls { nil => u, cons(hd, tl) => f(hd, pure_foldl(*tl, f(hd, u), f)) } } pure fn pure_length(ls: list) -> uint { fn count(_t: T, &&u: uint) -> uint { u + 1u } unchecked { pure_foldl(ls, 0u, count) } } ~~~~ Despite its name, `pure_foldl` is a `fn`, not a `pure fn`, because there is no way in Rust to specify that the higher-order function argument `f` is a pure function. So, to use `foldl` in a pure list length function that a pure function could then use, we must use an `unchecked` block wrapped around the call to `pure_foldl` in the definition of `pure_length`. #### Generic functions A _generic function_ allows one or more _parameterized types_ to appear in its signature. Each type parameter must be explicitly declared, in an angle-bracket-enclosed, comma-separated list following the function name. ~~~~ fn iter(seq: ~[T], f: fn(T)) { for seq.each |elt| { f(elt); } } fn map(seq: ~[T], f: fn(T) -> U) -> ~[U] { let mut acc = ~[]; for seq.each |elt| { vec::push(acc, f(elt)); } acc } ~~~~ Inside the function signature and body, the name of the type parameter can be used as a type name. When a generic function is referenced, its type is instantiated based on the context of the reference. For example, calling the `iter` function defined above on `[1, 2]` will instantiate type parameter `T` with `int`, and require the closure parameter to have type `fn(int)`. Since a parameter type is opaque to the generic function, the set of operations that can be performed on it is limited. Values of parameter type can always be moved, but they can only be copied when the parameter is given a [`copy` bound](#type-kinds). ~~~~ fn id(x: T) -> T { x } ~~~~ Similarly, [trait](#traits) bounds can be specified for type parameters to allow methods with that trait to be called on values of that type. #### Extern functions Extern functions are part of Rust's foreign function interface, providing the opposite functionality to [foreign modules](#foreign-modules). Whereas foreign modules allow Rust code to call foreign code, extern functions with bodies defined in Rust code _can be called by foreign code_. They are defined the same as any other Rust function, except that they are prepended with the `extern` keyword. ~~~ extern fn new_vec() -> ~[int] { ~[] } ~~~ Extern functions may not be called from Rust code, but their value may be taken as an unsafe `u8` pointer. ~~~ # extern fn new_vec() -> ~[int] { ~[] } let fptr: *u8 = new_vec; ~~~ The primary motivation of extern functions is to create callbacks for foreign functions that expect to receive function pointers. ### Type definitions A _type definition_ defines a new name for an existing [type](#types). Type definitions are declared with the keyword `type`. Every value has a single, specific type; the type-specified aspects of a value include: * Whether the value is composed of sub-values or is indivisible. * Whether the value represents textual or numerical information. * Whether the value represents integral or floating-point information. * The sequence of memory operations required to access the value. * The *kind* of the type (pinned, unique or shared). For example, the type `{x: u8, y: u8`} defines the set of immutable values that are composite records, each containing two unsigned 8-bit integers accessed through the components `x` and `y`, and laid out in memory with the `x` component preceding the `y` component. ### Enumerations An _enumeration item_ simultaneously declares a new nominal [enumerated type](#enumerated-types) as well as a set of *constructors* that can be used to create or pattern-match values of the corresponding enumerated type. Note that `enum` previously was referred to as a `tag`, however this definition has been deprecated. While `tag` is no longer used, the two are synonymous. The constructors of an `enum` type may be recursive: that is, each constructor may take an argument that refers, directly or indirectly, to the enumerated type the constructor is a member of. Such recursion has restrictions: * Recursive types can be introduced only through `enum` constructors. * A recursive `enum` item must have at least one non-recursive constructor (in order to give the recursion a basis case). * The recursive argument of recursive `enum` constructors must be [*box* values](#box-types) (in order to bound the in-memory size of the constructor). * Recursive type definitions can cross module boundaries, but not module *visibility* boundaries or crate boundaries (in order to simplify the module system). An example of an `enum` item and its use: ~~~~ enum animal { dog, cat } let mut a: animal = dog; a = cat; ~~~~ An example of a *recursive* `enum` item and its use: ~~~~ enum list { nil, cons(T, @list) } let a: list = cons(7, @cons(13, @nil)); ~~~~ ### Traits A _trait item_ describes a set of method types. [_implementation items_](#implementations) can be used to provide implementations of those methods for a specific type. ~~~~ # type surface = int; # type bounding_box = int; trait shape { fn draw(surface); fn bounding_box() -> bounding_box; } ~~~~ This defines a trait with two methods. All values that have [implementations](#implementations) of this trait in scope can have their `draw` and `bounding_box` methods called, using `value.bounding_box()` [syntax](#field-expressions). Type parameters can be specified for a trait to make it generic. These appear after the name, using the same syntax used in [generic functions](#generic-functions). ~~~~ trait seq { fn len() -> uint; fn elt_at(n: uint) -> T; fn iter(fn(T)); } ~~~~ Generic functions may use traits as bounds on their type parameters. This will have two effects: only types that have the trait may instantiate the parameter, and within the generic function, the methods of the trait can be called on values that have the parameter's type. For example: ~~~~ # type surface = int; # trait shape { fn draw(surface); } fn draw_twice(surface: surface, sh: T) { sh.draw(surface); sh.draw(surface); } ~~~~ Trait items also define a type with the same name as the trait. Values of this type are created by [casting](#type-cast-expressions) values (of a type for which an implementation of the given trait is in scope) to the trait type. ~~~~ # trait shape { } # impl int: shape { } # let mycircle = 0; let myshape: shape = mycircle as shape; ~~~~ The resulting value is a reference-counted box containing the value that was cast along with information that identify the methods of the implementation that was used. Values with a trait type can always have methods from their trait called on them, and can be used to instantiate type parameters that are bounded by their trait. ### Implementations An _implementation item_ provides an implementation of a [trait](#traits) for a type. ~~~~ # type point = {x: float, y: float}; # type surface = int; # type bounding_box = {x: float, y: float, width: float, height: float}; # trait shape { fn draw(surface); fn bounding_box() -> bounding_box; } # fn do_draw_circle(s: surface, c: circle) { } type circle = {radius: float, center: point}; impl circle: shape { fn draw(s: surface) { do_draw_circle(s, self); } fn bounding_box() -> bounding_box { let r = self.radius; {x: self.center.x - r, y: self.center.y - r, width: 2.0 * r, height: 2.0 * r} } } ~~~~ This defines an implementation named `circle_shape` of trait `shape` for type `circle`. The name of the implementation is the name by which it is imported and exported, but has no further significance. It may be omitted to default to the name of the trait that was implemented. Implementation names do not conflict the way other names do: multiple implementations with the same name may exist in a scope at the same time. It is possible to define an implementation without referring to a trait. The methods in such an implementation can only be used statically (as direct calls on the values of the type that the implementation targets). In such an implementation, the `of` clause is not given, and the name is mandatory. Such implementations are limited to nominal types (enums, structs) and the implementation must appear in the same module or a sub-module as the receiver type. _When_ a trait is specified, all methods declared as part of the trait must be present, with matching types and type parameter counts, in the implementation. An implementation can take type parameters, which can be different from the type parameters taken by the trait it implements. They are written after the name of the implementation, or if that is not specified, after the `impl` keyword. ~~~~ # trait seq { } impl ~[T]: seq { /* ... */ } impl u32: seq { /* Treat the integer as a sequence of bits */ } ~~~~ ### Foreign modules ~~~ {.ebnf .gram} foreign_mod_item : "extern mod" ident '{' foreign_mod '} ; foreign_mod : [ foreign_fn ] * ; ~~~ Foreign modules form the basis for Rust's foreign function interface. A foreign module describes functions in external, non-Rust libraries. Functions within foreign modules are declared the same as other Rust functions, with the exception that they may not have a body and are instead terminated by a semi-colon. ~~~ # import libc::{c_char, FILE}; # #[nolink] extern mod c { fn fopen(filename: *c_char, mode: *c_char) -> *FILE; } ~~~ Functions within foreign modules may be called by Rust code as it would any normal function and the Rust compiler will automatically translate between the Rust ABI and the foreign ABI. The name of the foreign module has special meaning to the Rust compiler in that it will treat the module name as the name of a library to link to, performing the linking as appropriate for the target platform. The name given for the foreign module will be transformed in a platform-specific way to determine the name of the library. For example, on Linux the name of the foreign module is prefixed with 'lib' and suffixed with '.so', so the foreign mod 'rustrt' would be linked to a library named 'librustrt.so'. A number of [attributes](#attributes) control the behavior of foreign modules. By default foreign modules assume that the library they are calling use the standard C "cdecl" ABI. Other ABI's may be specified using the `abi` attribute as in ~~~{.xfail-test} // Interface to the Windows API #[abi = "stdcall"] extern mod kernel32 { } ~~~ The `link_name` attribute allows the default library naming behavior to be overriden by explicitly specifying the name of the library. ~~~{.xfail-test} #[link_name = "crypto"] extern mod mycrypto { } ~~~ The `nolink` attribute tells the Rust compiler not to perform any linking for the foreign module. This is particularly useful for creating foreign modules for libc, which tends to not follow standard library naming conventions and is linked to all Rust programs anyway. ## Attributes ~~~~~~~~{.ebnf .gram} attribute : '#' '[' attr_list ']' ; attr_list : attr [ ',' attr_list ]* attr : ident [ '=' literal | '(' attr_list ')' ] ? ; ~~~~~~~~ Static entities in Rust -- crates, modules and items -- may have _attributes_ applied to them. ^[Attributes in Rust are modeled on Attributes in ECMA-335, C#] An attribute is a general, free-form piece of metadata that is interpreted according to name, convention, and language and compiler version. Attributes may appear as any of: * A single identifier, the attribute name * An identifier followed by the equals sign '=' and a literal, providing a key/value pair * An identifier followed by a parenthesized list of sub-attribute arguments Attributes are applied to an entity by placing them within a hash-list (`#[...]`) as either a prefix to the entity or as a semicolon-delimited declaration within the entity body. An example of attributes: ~~~~~~~~{.xfail-test} // General metadata applied to the enclosing module or crate. #[license = "BSD"]; // A function marked as a unit test #[test] fn test_foo() { // ... } // A conditionally-compiled module #[cfg(target_os="linux")] mod bar { // ... } // A documentation attribute #[doc = "Add two numbers together."] fn add(x: int, y: int) { x + y } ~~~~~~~~ In future versions of Rust, user-provided extensions to the compiler will be able to interpret attributes. When this facility is provided, the compiler will distinguish will be made between language-reserved and user-available attributes. At present, only the Rust compiler interprets attributes, so all attribute names are effectively reserved. Some significant attributes include: * The `doc` attribute, for documenting code in-place. * The `cfg` attribute, for conditional-compilation by build-configuration. * The `link` attribute, for describing linkage metadata for a crate. * The `test` attribute, for marking functions as unit tests. Other attributes may be added or removed during development of the language. # Statements and expressions Rust is _primarily_ an expression language. This means that most forms of value-producing or effect-causing evaluation are directed by the uniform syntax category of _expressions_. Each kind of expression can typically _nest_ within each other kind of expression, and rules for evaluation of expressions involve specifying both the value produced by the expression and the order in which its sub-expressions are themselves evaluated. In contrast, statements in Rust serve _mostly_ to contain and explicitly sequence expression evaluation. ## Statements A _statement_ is a component of a block, which is in turn a component of an outer [expression](#expressions) or [function](#functions). When a function is spawned into a [task](#tasks), the task *executes* statements in an order determined by the body of the enclosing function. Each statement causes the task to perform certain actions. Rust has two kinds of statement: [declaration statements](#declaration-statements) and [expression statements](#expression-statements). ### Declaration statements A _declaration statement_ is one that introduces a *name* into the enclosing statement block. The declared name may denote a new slot or a new item. #### Item declarations An _item declaration statement_ has a syntactic form identical to an [item](#items) declaration within a module. Declaring an item -- a function, enumeration, type, resource, trait, implementation or module -- locally within a statement block is simply a way of restricting its scope to a narrow region containing all of its uses; it is otherwise identical in meaning to declaring the item outside the statement block. Note: there is no implicit capture of the function's dynamic environment when declaring a function-local item. #### Slot declarations ~~~~~~~~{.ebnf .gram} let_decl : "let" pat [':' type ] ? [ init ] ? ';' ; init : [ '=' | '<-' ] expr ; ~~~~~~~~ A _slot declaration_ has one of two forms: * `let` `pattern` `optional-init`; * `let` `pattern` : `type` `optional-init`; Where `type` is a type expression, `pattern` is an irrefutable pattern (often just the name of a single slot), and `optional-init` is an optional initializer. If present, the initializer consists of either an assignment operator (`=`) or move operator (`<-`), followed by an expression. Both forms introduce a new slot into the enclosing block scope. The new slot is visible from the point of declaration until the end of the enclosing block scope. The former form, with no type annotation, causes the compiler to infer the static type of the slot through unification with the types of values assigned to the slot in the remaining code in the block scope. Inference only occurs on frame-local variable, not argument slots. Function signatures must always declare types for all argument slots. ### Expression statements An _expression statement_ is one that evaluates an [expression](#expressions) and drops its result. The purpose of an expression statement is often to cause the side effects of the expression's evaluation. ## Expressions An expression plays the dual roles of causing side effects and producing a *value*. Expressions are said to *evaluate to* a value, and the side effects are caused during *evaluation*. Many expressions contain sub-expressions as operands; the definition of each kind of expression dictates whether or not, and in which order, it will evaluate its sub-expressions, and how the expression's value derives from the value of its sub-expressions. In this way, the structure of execution -- both the overall sequence of observable side effects and the final produced value -- is dictated by the structure of expressions. Blocks themselves are expressions, so the nesting sequence of block, statement, expression, and block can repeatedly nest to an arbitrary depth. ### Literal expressions A _literal expression_ consists of one of the [literal](#literals) forms described earlier. It directly describes a number, character, string, boolean value, or the nil value. ~~~~~~~~ {.literals} (); // nil type ~"hello"; // string type '5'; // character type 5; // integer type ~~~~~~~~ ### Tuple expressions Tuples are written by enclosing two or more comma-separated expressions in parentheses. They are used to create [tuple-typed](#tuple-types) values. ~~~~~~~~ {.tuple} (0f, 4.5f); (~"a", 4u, true); ~~~~~~~~ ### Record expressions ~~~~~~~~{.ebnf .gram} rec_expr : '{' ident ':' expr [ ',' ident ':' expr ] * [ "with" expr ] '}' ~~~~~~~~ A [_record_](#record-types) _expression_ is one or more comma-separated name-value pairs enclosed by braces. A fieldname can be any identifier (including keywords), and is separated from its value expression by a colon. To indicate that a field is mutable, the `mut` keyword is written before its name. ~~~~ {x: 10f, y: 20f}; {name: ~"Joe", age: 35u, score: 100_000}; {ident: ~"X", mut count: 0u}; ~~~~ The order of the fields in a record expression is significant, and determines the type of the resulting value. `{a: u8, b: u8}` and `{b: u8, a: u8}` are two different fields. A record expression can terminate with the word `with` followed by an expression to denote a functional update. The expression following `with` (the base) must be of a record type that includes at least all the fields mentioned in the record expression. A new record will be created, of the same type as the base expression, with the given values for the fields that were explicitly specified, and the values in the base record for all other fields. The ordering of the fields in such a record expression is not significant. ~~~~ let base = {x: 1, y: 2, z: 3}; {y: 0, z: 10 with base}; ~~~~ ### Field expressions ~~~~~~~~{.ebnf .gram} field_expr : expr '.' expr ~~~~~~~~ A dot can be used to access a field in a record. ~~~~~~~~ {.field} myrecord.myfield; {a: 10, b: 20}.a; ~~~~~~~~ A field access on a record is an _lval_ referring to the value of that field. When the field is mutable, it can be [assigned](#assignment-expressions) to. When the type of the expression to the left of the dot is a boxed record, it is automatically derferenced to make the field access possible. Field access syntax is overloaded for [trait method](#traits) access. When no matching field is found, or the expression to the left of the dot is not a (boxed) record, an [implementation](#implementations) that matches this type and the given method name is looked up instead, and the result of the expression is this method, with its _self_ argument bound to the expression on the left of the dot. ### Vector expressions ~~~~~~~~{.ebnf .gram} vec_expr : '[' "mut" ? [ expr [ ',' expr ] * ] ? ']' ~~~~~~~~ A [_vector_](#vector-types) _expression_ is written by enclosing zero or more comma-separated expressions of uniform type in square brackets. The keyword `mut` can be written after the opening bracket to indicate that the elements of the resulting vector may be mutated. When no mutability is specified, the vector is immutable. ~~~~ ~[1, 2, 3, 4]; ~[~"a", ~"b", ~"c", ~"d"]; ~[mut 0u8, 0u8, 0u8, 0u8]; ~~~~ ### Index expressions ~~~~~~~~{.ebnf .gram} idx_expr : expr '[' expr ']' ~~~~~~~~ [Vector](#vector-types)-typed expressions can be indexed by writing a square-bracket-enclosed expression (the index) after them. When the vector is mutable, the resulting _lval_ can be assigned to. Indices are zero-based, and may be of any integral type. Vector access is bounds-checked at run-time. When the check fails, it will put the task in a _failing state_. ~~~~ # do task::spawn_unlinked { (~[1, 2, 3, 4])[0]; (~[mut 'x', 'y'])[1] = 'z'; (~[~"a", ~"b"])[10]; // fails # } ~~~~ ### Unary operator expressions Rust defines five unary operators. They are all written as prefix operators, before the expression they apply to. `-` : Negation. May only be applied to numeric types. `*` : Dereference. When applied to a [box](#box-types) or [resource](#resources) type, it accesses the inner value. For mutable boxes, the resulting _lval_ can be assigned to. For [enums](#enumerated-types) that have only a single variant, containing a single parameter, the dereference operator accesses this parameter. `!` : Logical negation. On the boolean type, this flips between `true` and `false`. On integer types, this inverts the individual bits in the two's complement representation of the value. `@` and `~` : [Boxing](#box-types) operators. Allocate a box to hold the value they are applied to, and store the value in it. `@` creates a shared, reference-counted box, whereas `~` creates a unique box. ### Binary operator expressions ~~~~~~~~{.ebnf .gram} binop_expr : expr binop expr ; ~~~~~~~~ Binary operators expressions are given in terms of [operator precedence](#operator-precedence). #### Arithmetic operators Binary arithmetic expressions require both their operands to be of the same type, and can be applied only to numeric types, with the exception of `+`, which acts both as addition operator on numbers and as concatenate operator on vectors and strings. `+` : Addition and vector/string concatenation. `-` : Subtraction. `*` : Multiplication. `/` : Division. `%` : Remainder. #### Bitwise operators Bitwise operators apply only to integer types, and perform their operation on the bits of the two's complement representation of the values. `&` : And. `|` : Inclusive or. `^` : Exclusive or. `<<` : Logical left shift. `>>` : Logical right shift. `>>>` : Arithmetic right shift. #### Lazy boolean operators The operators `||` and `&&` may be applied to operands of boolean type. The first performs the 'or' operation, and the second the 'and' operation. They differ from `|` and `&` in that the right-hand operand is only evaluated when the left-hand operand does not already determine the outcome of the expression. That is, `||` only evaluates its right-hand operand when the left-hand operand evaluates to `false`, and `&&` only when it evaluates to `true`. #### Comparison operators `==` : Equal to. `!=` : Unequal to. `<` : Less than. `>` : Greater than. `<=` : Less than or equal. `>=` : Greater than or equal. The binary comparison operators can be applied to any two operands of the same type, and produce a boolean value. *TODO* details on how types are descended during comparison. #### Type cast expressions A type cast expression is denoted with the binary operator `as`. Executing an `as` expression casts the value on the left-hand side to the type on the right-hand side. A numeric value can be cast to any numeric type. An unsafe pointer value can be cast to or from any integral type or unsafe pointer type. Any other cast is unsupported and will fail to compile. An example of an `as` expression: ~~~~ # fn sum(v: ~[float]) -> float { 0.0 } # fn len(v: ~[float]) -> int { 0 } fn avg(v: ~[float]) -> float { let sum: float = sum(v); let sz: float = len(v) as float; return sum / sz; } ~~~~ A cast is a *trivial cast* iff the type of the casted expression and the target type are identical after replacing all occurrences of `int`, `uint`, `float` with their machine type equivalents of the target architecture in both types. #### Binary move expressions A _binary move expression_ consists of an *lval* followed by a left-pointing arrow (`<-`) and an *rval* expression. Evaluating a move expression causes, as a side effect, the *rval* to be *moved* into the *lval*. If the *rval* was itself an *lval*, it must be a local variable, as it will be de-initialized in the process. Evaluating a move expression does not change reference counts, nor does it cause a deep copy of any unique structure pointed to by the moved *rval*. Instead, the move expression represents an indivisible *transfer of ownership* from the right-hand-side to the left-hand-side of the expression. No allocation or destruction is entailed. An example of three different move expressions: ~~~~~~~~ # let mut x = ~[mut 0]; # let a = ~[mut 0]; # let b = 0; # let y = {mut z: 0}; # let c = 0; # let i = 0; x <- a; x[i] <- b; y.z <- c; ~~~~~~~~ #### Swap expressions A _swap expression_ consists of an *lval* followed by a bi-directional arrow (`<->`) and another *lval* expression. Evaluating a swap expression causes, as a side effect, the values held in the left-hand-side and right-hand-side *lvals* to be exchanged indivisibly. Evaluating a swap expression neither changes reference counts nor deeply copies any unique structure pointed to by the moved *rval*. Instead, the swap expression represents an indivisible *exchange of ownership* between the right-hand-side and the left-hand-side of the expression. No allocation or destruction is entailed. An example of three different swap expressions: ~~~~~~~~ # let mut x = ~[mut 0]; # let mut a = ~[mut 0]; # let i = 0; # let y = {mut z: 0}; # let b = {mut c: 0}; x <-> a; x[i] <-> a[i]; y.z <-> b.c; ~~~~~~~~ #### Assignment expressions An _assignment expression_ consists of an *lval* expression followed by an equals sign (`=`) and an *rval* expression. Evaluating an assignment expression is equivalent to evaluating a [binary move expression](#binary-move-expressions) applied to a [unary copy expression](#unary-copy-expressions). For example, the following two expressions have the same effect: ~~~~ # let mut x = 0; # let y = 0; x = y; x <- copy y; ~~~~ The former is just more terse and familiar. #### Compound assignment expressions The `+`, `-`, `*`, `/`, `%`, `&`, `|`, `^`, `<<`, `>>`, and `>>>` operators may be composed with the `=` operator. The expression `lval OP= val` is equivalent to `lval = lval OP val`. For example, `x = x + 1` may be written as `x += 1`. Any such expression always has the [`nil`](#primitive-types) type. #### Operator precedence The precedence of Rust binary operators is ordered as follows, going from strong to weak: ~~~~ {.precedence} * / % as + - << >> >>> & ^ | < > <= >= == != && || = <- <-> ~~~~ Operators at the same precedence level are evaluated left-to-right. ### Grouped expressions An expression enclosed in parentheses evaluates to the result of the enclosed expression. Parentheses can be used to explicitly specify evaluation order within an expression. ~~~~~~~~{.ebnf .gram} paren_expr : '(' expr ')' ; ~~~~~~~~ An example of a parenthesized expression: ~~~~ let x = (2 + 3) * 4; ~~~~ ### Unary copy expressions ~~~~~~~~{.ebnf .gram} copy_expr : "copy" expr ; ~~~~~~~~ A _unary copy expression_ consists of the unary `copy` operator applied to some argument expression. Evaluating a copy expression first evaluates the argument expression, then copies the resulting value, allocating any memory necessary to hold the new copy. [Shared boxes](#box-types) (type `@`) are, as usual, shallow-copied, as they may be cyclic. [Unique boxes](#box-types), [vectors](#vector-types) and similar unique types are deep-copied. Since the binary [assignment operator](#assignment-expressions) `=` performs a copy implicitly, the unary copy operator is typically only used to cause an argument to a function to be copied and passed by value. An example of a copy expression: ~~~~ fn mutate(vec: ~[mut int]) { vec[0] = 10; } let v = ~[mut 1,2,3]; mutate(copy v); // Pass a copy assert v[0] == 1; // Original was not modified ~~~~ ### Call expressions ~~~~~~~~ {.abnf .gram} expr_list : [ expr [ ',' expr ]* ] ? ; paren_expr_list : '(' expr_list ')' ; call_expr : expr paren_expr_list ; ~~~~~~~~ A _call expression_ invokes a function, providing zero or more input slots and an optional reference slot to serve as the function's output, bound to the `lval` on the right hand side of the call. If the function eventually returns, then the expression completes. An example of a call expression: ~~~~ # fn add(x: int, y: int) -> int { 0 } let x: int = add(1, 2); ~~~~ ### Shared function expressions *TODO*. ### Unique function expressions *TODO*. ### While loops ~~~~~~~~{.ebnf .gram} while_expr : "while" expr '{' block '}' | "do" '{' block '}' "while" expr ; ~~~~~~~~ A `while` loop begins by evaluating the boolean loop conditional expression. If the loop conditional expression evaluates to `true`, the loop body block executes and control returns to the loop conditional expression. If the loop conditional expression evaluates to `false`, the `while` expression completes. An example: ~~~~ let mut i = 0; while i < 10 { io::println(~"hello\n"); i = i + 1; } ~~~~ ### Infinite loops A `loop` expression denotes an infinite loop: ~~~~~~~~{.ebnf .gram} loop_expr : "loop" '{' block '}'; ~~~~~~~~ ### Break expressions ~~~~~~~~{.ebnf .gram} break_expr : "break" ; ~~~~~~~~ Executing a `break` expression immediately terminates the innermost loop enclosing it. It is only permitted in the body of a loop. ### Again expressions ~~~~~~~~{.ebnf .gram} again_expr : "again" ; ~~~~~~~~ Evaluating an `again` expression immediately terminates the current iteration of the innermost loop enclosing it, returning control to the loop *head*. In the case of a `while` loop, the head is the conditional expression controlling the loop. In the case of a `for` loop, the head is the call-expression controlling the loop. An `again` expression is only permitted in the body of a loop. ### For expressions ~~~~~~~~{.ebnf .gram} for_expr : "for" pat "in" expr '{' block '}' ; ~~~~~~~~ A _for loop_ is controlled by a vector or string. The for loop bounds-checks the underlying sequence *once* when initiating the loop, then repeatedly executes the loop body with the loop variable referencing the successive elements of the underlying sequence, one iteration per sequence element. An example a for loop: ~~~~ # type foo = int; # fn bar(f: foo) { } # let a = 0, b = 0, c = 0; let v: ~[foo] = ~[a, b, c]; for v.each |e| { bar(e); } ~~~~ ### If expressions ~~~~~~~~{.ebnf .gram} if_expr : "if" expr '{' block '}' else_tail ? ; else_tail : "else" [ if_expr | '{' block '}' ] ; ~~~~~~~~ An `if` expression is a conditional branch in program control. The form of an `if` expression is a condition expression, followed by a consequent block, any number of `else if` conditions and blocks, and an optional trailing `else` block. The condition expressions must have type `bool`. If a condition expression evaluates to `true`, the consequent block is executed and any subsequent `else if` or `else` block is skipped. If a condition expression evaluates to `false`, the consequent block is skipped and any subsequent `else if` condition is evaluated. If all `if` and `else if` conditions evaluate to `false` then any `else` block is executed. ### Match expressions ~~~~~~~~{.ebnf .gram} match_expr : "match" expr '{' match_arm [ '|' match_arm ] * '}' ; match_arm : match_pat '=>' expr_or_blockish ; match_pat : pat [ "to" pat ] ? [ "if" expr ] ; ~~~~~~~~ A `match` expression branches on a *pattern*. The exact form of matching that occurs depends on the pattern. Patterns consist of some combination of literals, destructured enum constructors, records and tuples, variable binding specifications, wildcards (`*`), and placeholders (`_`). A `match` expression has a *head expression*, which is the value to compare to the patterns. The type of the patterns must equal the type of the head expression. In a pattern whose head expression has an `enum` type, a placeholder (`_`) stands for a *single* data field, whereas a wildcard `*` stands for *all* the fields of a particular variant. For example: ~~~~ enum list { nil, cons(X, @list) } let x: list = cons(10, @cons(11, @nil)); match x { cons(_, @nil) => fail ~"singleton list", cons(*) => return, nil => fail ~"empty list" } ~~~~ The first pattern matches lists constructed by applying `cons` to any head value, and a tail value of `@nil`. The second pattern matches `any` list constructed with `cons`, ignoring the values of its arguments. The difference between `_` and `*` is that the pattern `C(_)` is only type-correct if `C` has exactly one argument, while the pattern `C(*)` is type-correct for any enum variant `C`, regardless of how many arguments `C` has. To execute an `match` expression, first the head expression is evaluated, then its value is sequentially compared to the patterns in the arms until a match is found. The first arm with a matching pattern is chosen as the branch target of the `match`, any variables bound by the pattern are assigned to local variables in the arm's block, and control enters the block. An example of an `match` expression: ~~~~ # fn process_pair(a: int, b: int) { } # fn process_ten() { } enum list { nil, cons(X, @list) } let x: list = cons(10, @cons(11, @nil)); match x { cons(a, @cons(b, _)) => { process_pair(a,b); } cons(10, _) => { process_ten(); } nil => { return; } _ => { fail; } } ~~~~ Records can also be pattern-matched and their fields bound to variables. When matching fields of a record, the fields being matched are specified first, then a placeholder (`_`) represents the remaining fields. ~~~~ # type options = {choose: bool, size: ~str}; # type player = {player: ~str, stats: (), options: options}; # fn load_stats() { } # fn choose_player(r: player) { } # fn next_player() { } fn main() { let r = { player: ~"ralph", stats: load_stats(), options: { choose: true, size: ~"small" } }; match r { {options: {choose: true, _}, _} => { choose_player(r) } {player: p, options: {size: ~"small", _}, _} => { log(info, p + ~" is small"); } _ => { next_player(); } } } ~~~~ Multiple match patterns may be joined with the `|` operator. A range of values may be specified with `to`. For example: ~~~~ # let x = 2; let message = match x { 0 | 1 => ~"not many", 2 to 9 => ~"a few", _ => ~"lots" }; ~~~~ Finally, match patterns can accept *pattern guards* to further refine the criteria for matching a case. Pattern guards appear after the pattern and consist of a bool-typed expression following the `if` keyword. A pattern guard may refer to the variables bound within the pattern they follow. ~~~~ # let maybe_digit = Some(0); # fn process_digit(i: int) { } # fn process_other(i: int) { } let message = match maybe_digit { Some(x) if x < 10 => process_digit(x), Some(x) => process_other(x), None => fail }; ~~~~ ### Fail expressions ~~~~~~~~{.ebnf .gram} fail_expr : "fail" expr ? ; ~~~~~~~~ Evaluating a `fail` expression causes a task to enter the *failing* state. In the *failing* state, a task unwinds its stack, destroying all frames and freeing all resources until it reaches its entry frame, at which point it halts execution in the *dead* state. ### Note expressions ~~~~~~~~{.ebnf .gram} note_expr : "note" expr ; ~~~~~~~~ **Note: Note expressions are not yet supported by the compiler.** A `note` expression has no effect during normal execution. The purpose of a `note` expression is to provide additional diagnostic information to the logging subsystem during task failure. See [log expressions](#log-expressions). Using `note` expressions, normal diagnostic logging can be kept relatively sparse, while still providing verbose diagnostic "back-traces" when a task fails. When a task is failing, control frames *unwind* from the innermost frame to the outermost, and from the innermost lexical block within an unwinding frame to the outermost. When unwinding a lexical block, the runtime processes all the `note` expressions in the block sequentially, from the first expression of the block to the last. During processing, a `note` expression has equivalent meaning to a `log` expression: it causes the runtime to append the argument of the `note` to the internal logging diagnostic buffer. An example of a `note` expression: ~~~~{.xfail-test} fn read_file_lines(path: ~str) -> ~[~str] { note path; let r: [~str]; let f: file = open_read(path); lines(f) |s| { r += ~[s]; } return r; } ~~~~ In this example, if the task fails while attempting to open or read a file, the runtime will log the path name that was being read. If the function completes normally, the runtime will not log the path. A value that is marked by a `note` expression is *not* copied aside when control passes through the `note`. In other words, if a `note` expression notes a particular `lval`, and code after the `note` mutates that slot, and then a subsequent failure occurs, the *mutated* value will be logged during unwinding, *not* the original value that was denoted by the `lval` at the moment control passed through the `note` expression. ### Return expressions ~~~~~~~~{.ebnf .gram} return_expr : "return" expr ? ; ~~~~~~~~ Return expressions are denoted with the keyword `return`. Evaluating a `return` expression^[A `return` expression is analogous to a `return` expression in the C family.] moves its argument into the output slot of the current function, destroys the current function activation frame, and transfers control to the caller frame. An example of a `return` expression: ~~~~ fn max(a: int, b: int) -> int { if a > b { return a; } return b; } ~~~~ ### Log expressions ~~~~~~~~{.ebnf .gram} log_expr : "log" '(' level ',' expr ')' ; ~~~~~~~~ Evaluating a `log` expression may, depending on runtime configuration, cause a value to be appended to an internal diagnostic logging buffer provided by the runtime or emitted to a system console. Log expressions are enabled or disabled dynamically at run-time on a per-task and per-item basis. See [logging system](#logging-system). Each `log` expression must be provided with a *level* argument in addition to the value to log. The logging level is a `u32` value, where lower levels indicate more-urgent levels of logging. By default, the lowest four logging levels (`0_u32 ... 3_u32`) are predefined as the constants `error`, `warn`, `info` and `debug` in the `core` library. Additionally, the macros `error!`, `warn!`, `info!` and `debug!` are defined in the default syntax-extension namespace. These expand into calls to the logging facility composed with calls to the `fmt!` string formatting syntax-extension. The following examples all produce the same output, logged at the `error` logging level: ~~~~ # let filename = ~"bulbasaur"; // Full version, logging a value. log(core::error, ~"file not found: " + filename); // Log-level abbreviated, since core::* is imported by default. log(error, ~"file not found: " + filename); // Formatting the message using a format-string and #fmt log(error, fmt!("file not found: %s", filename)); // Using the #error macro, that expands to the previous call. error!("file not found: %s", filename); ~~~~ A `log` expression is *not evaluated* when logging at the specified logging-level, module or task is disabled at runtime. This makes inactive `log` expressions very cheap; they should be used extensively in Rust code, as diagnostic aids, as they add little overhead beyond a single integer-compare and branch at runtime. Logging is presently implemented as a language built-in feature, as it makes use of compiler-provided logic for allocating the associated per-module logging-control structures visible to the runtime, and lazily evaluating arguments. In the future, as more of the supporting compiler-provided logic is moved into libraries, logging is likely to move to a component of the core library. It is best to use the macro forms of logging (*#error*, *#debug*, etc.) to minimize disruption to code using the logging facility when it is changed. ### Assert expressions ~~~~~~~~{.ebnf .gram} assert_expr : "assert" expr ; ~~~~~~~~ An `assert` expression is similar to a `check` expression, except the condition may be any boolean-typed expression, and the compiler makes no use of the knowledge that the condition holds if the program continues to execute after the `assert`. # Type system ## Types Every slot and value in a Rust program has a type. The _type_ of a *value* defines the interpretation of the memory holding it. The type of a *slot* may also include [constraints](#constraints). Built-in types and type-constructors are tightly integrated into the language, in nontrivial ways that are not possible to emulate in user-defined types. User-defined types have limited capabilities. In addition, every built-in type or type-constructor name is reserved as a *keyword* in Rust; they cannot be used as user-defined identifiers in any context. ### Primitive types The primitive types are the following: * The "nil" type `()`, having the single "nil" value `()`.^[The "nil" value `()` is *not* a sentinel "null pointer" value for reference slots; the "nil" type is the implicit return type from functions otherwise lacking a return type, and can be used in other contexts (such as message-sending or type-parametric code) as a zero-size type.] * The boolean type `bool` with values `true` and `false`. * The machine types. * The machine-dependent integer and floating-point types. #### Machine types The machine types are the following: * The unsigned word types `u8`, `u16`, `u32` and `u64`, with values drawn from the integer intervals $[0, 2^8 - 1]$, $[0, 2^16 - 1]$, $[0, 2^32 - 1]$ and $[0, 2^64 - 1]$ respectively. * The signed two's complement word types `i8`, `i16`, `i32` and `i64`, with values drawn from the integer intervals $[-(2^7), 2^7 - 1]$, $[-(2^15), 2^15 - 1]$, $[-(2^31), 2^31 - 1]$, $[-(2^63), 2^63 - 1]$ respectively. * The IEEE 754-2008 `binary32` and `binary64` floating-point types: `f32` and `f64`, respectively. #### Machine-dependent integer types The Rust type `uint`^[A Rust `uint` is analogous to a C99 `uintptr_t`.] is an unsigned integer type with target-machine-dependent size. Its size, in bits, is equal to the number of bits required to hold any memory address on the target machine. The Rust type `int`^[A Rust `int` is analogous to a C99 `intptr_t`.] is a two's complement signed integer type with target-machine-dependent size. Its size, in bits, is equal to the size of the rust type `uint` on the same target machine. #### Machine-dependent floating point type The Rust type `float` is a machine-specific type equal to one of the supported Rust floating-point machine types (`f32` or `f64`). It is the largest floating-point type that is directly supported by hardware on the target machine, or if the target machine has no floating-point hardware support, the largest floating-point type supported by the software floating-point library used to support the other floating-point machine types. Note that due to the preference for hardware-supported floating-point, the type `float` may not be equal to the largest *supported* floating-point type. ### Textual types The types `char` and `~str` hold textual data. A value of type `char` is a Unicode character, represented as a 32-bit unsigned word holding a UCS-4 codepoint. A value of type `~str` is a Unicode string, represented as a vector of 8-bit unsigned bytes holding a sequence of UTF-8 codepoints. ### Record types The record type-constructor forms a new heterogeneous product of values.^[The record type-constructor is analogous to the `struct` type-constructor in the Algol/C family, the *record* types of the ML family, or the *structure* types of the Lisp family.] Fields of a record type are accessed by name and are arranged in memory in the order specified by the record type. An example of a record type and its use: ~~~~ type point = {x: int, y: int}; let p: point = {x: 10, y: 11}; let px: int = p.x; ~~~~ ### Tuple types The tuple type-constructor forms a new heterogeneous product of values similar to the record type-constructor. The differences are as follows: * tuple elements cannot be mutable, unlike record fields * tuple elements are not named and can be accessed only by pattern-matching Tuple types and values are denoted by listing the types or values of their elements, respectively, in a parenthesized, comma-separated list. Single-element tuples are not legal; all tuples have two or more values. The members of a tuple are laid out in memory contiguously, like a record, in order specified by the tuple type. An example of a tuple type and its use: ~~~~ type pair = (int,~str); let p: pair = (10,~"hello"); let (a, b) = p; assert b != ~"world"; ~~~~ ### Vector types The vector type-constructor represents a homogeneous array of values of a given type. A vector has a fixed size. The kind of a vector type depends on the kind of its member type, as with other simple structural types. An example of a vector type and its use: ~~~~ let v: ~[int] = ~[7, 5, 3]; let i: int = v[2]; assert (i == 3); ~~~~ Vectors always *allocate* a storage region sufficient to store the first power of two worth of elements greater than or equal to the size of the vector. This behaviour supports idiomatic in-place "growth" of a mutable slot holding a vector: ~~~~ let mut v: ~[int] = ~[1, 2, 3]; v += ~[4, 5, 6]; ~~~~ Normal vector concatenation causes the allocation of a fresh vector to hold the result; in this case, however, the slot holding the vector recycles the underlying storage in-place (since the reference-count of the underlying storage is equal to 1). All accessible elements of a vector are always initialized, and access to a vector is always bounds-checked. ### Enumerated types An *enumerated type* is a nominal, heterogeneous disjoint union type.^[The `enum` type is analogous to a `data` constructor declaration in ML or a *pick ADT* in Limbo.] An [`enum` *item*](#enumerations) consists of a number of *constructors*, each of which is independently named and takes an optional tuple of arguments. Enumerated types cannot be denoted *structurally* as types, but must be denoted by named reference to an [*enumeration* item](#enumerations). ### Box types Box types are represented as pointers. There are three flavours of pointers: Shared boxes (`@`) : These are reference-counted boxes. Their type is written `@content`, for example `@int` means a shared box containing an integer. Copying a value of such a type means copying the pointer and increasing the reference count. Unique boxes (`~`) : Unique boxes have only a single owner, and are freed when their owner releases them. They are written `~content`. Copying a unique box involves copying the contents into a new box. Unsafe pointers (`*`) : Unsafe pointers are pointers without safety guarantees or language-enforced semantics. Their type is written `*content`. They can be copied and dropped freely. Dereferencing an unsafe pointer is part of the unsafe sub-dialect of Rust. ### Function types The function type-constructor `fn` forms new function types. A function type consists of a sequence of input slots, an optional set of [input constraints](#constraints) and an output slot. An example of a `fn` type: ~~~~~~~~ fn add(x: int, y: int) -> int { return x + y; } let mut x = add(5,7); type binop = fn(int,int) -> int; let bo: binop = add; x = bo(5,7); ~~~~~~~~ ### Trait types Every trait item (see [traits](#traits)) defines a type with the same name as the trait. For a trait `T`, cast expressions introduce values of type `T`: ~~~~~~~~ trait printable { fn to_str() -> ~str; } impl ~str: printable { fn to_str() -> ~str { self } } fn print(a: printable) { io::println(a.to_str()); } fn main() { print(~"meow" as printable); } ~~~~~~~~ In this example, the trait `printable` occurs as a type in both the type signature of `print`, and the cast expression in `main`. ### Struct types Every struct item defines a type. ### Type parameters Within the body of an item that has type parameter declarations, the names of its type parameters are types: ~~~~~~~ fn map(f: fn(A) -> B, xs: ~[A]) -> ~[B] { if xs.len() == 0 { return ~[]; } let first: B = f(xs[0]); let rest: ~[B] = map(f, xs.slice(1, xs.len())); return ~[first] + rest; } ~~~~~~~ Here, `first` has type `B`, referring to `map`'s `B` type parameter; and `rest` has type `~[B]`, a vector type with element type `B`. ### Self type The special type `self` has a meaning within methods inside an impl item. It refers to the type of the implicit `self` argument. For example, in: ~~~~~~ trait printable { fn to_str() -> ~str; } impl ~str: printable { fn to_str() -> ~str { self } } ~~~~~~ `self` refers to the value of type `str` that is the receiver for a call to the method `to_str`. ## Type kinds Types in Rust are categorized into three kinds, based on whether they allow copying of their values, and sending to different tasks. The kinds are: Sendable : Values with a sendable type can be safely sent to another task. This kind includes scalars, unique pointers, unique closures, and structural types containing only other sendable types. Copyable : This kind includes all types that can be copied. All types with sendable kind are copyable, as are shared boxes, shared closures, trait types, and structural types built out of these. Noncopyable : [Resource](#resources) types, and every type that includes a resource without storing it in a shared box, may not be copied. Types of sendable or copyable type can always be used in places where a noncopyable type is expected, so in effect this kind includes all types. These form a hierarchy. The noncopyable kind is the widest, including all types in the language. The copyable kind is a subset of that, and the sendable kind is a subset of the copyable kind. Any operation that causes a value to be copied requires the type of that value to be of copyable kind. Type parameter types are assumed to be noncopyable, unless one of the special bounds `send` or `copy` is declared for it. For example, this is not a valid program: ~~~~{.xfail-test} fn box(x: T) -> @T { @x } ~~~~ Putting `x` into a shared box involves copying, and the `T` parameter is assumed to be noncopyable. To change that, a bound is declared: ~~~~ fn box(x: T) -> @T { @x } ~~~~ Calling this second version of `box` on a noncopyable type is not allowed. When instantiating a type parameter, the kind bounds on the parameter are checked to be the same or narrower than the kind of the type that it is instantiated with. Sending operations are not part of the Rust language, but are implemented in the library. Generic functions that send values bound the kind of these values to sendable. # Memory and concurrency models Rust has a memory model centered around concurrently-executing _tasks_. Thus its memory model and its concurrency model are best discussed simultaneously, as parts of each only make sense when considered from the perspective of the other. When reading about the memory model, keep in mind that it is partitioned in order to support tasks; and when reading about tasks, keep in mind that their isolation and communication mechanisms are only possible due to the ownership and lifetime semantics of the memory model. ## Memory model A Rust program's memory consists of a static set of *items*, a set of [tasks](#tasks) each with its own *stack*, and a *heap*. Immutable portions of the heap may be shared between tasks, mutable portions may not. Allocations in the stack consist of *slots*, and allocations in the heap consist of *boxes*. ### Memory allocation and lifetime The _items_ of a program are those functions, modules and types that have their value calculated at compile-time and stored uniquely in the memory image of the rust process. Items are neither dynamically allocated nor freed. A task's _stack_ consists of activation frames automatically allocated on entry to each function as the task executes. A stack allocation is reclaimed when control leaves the frame containing it. The _heap_ is a general term that describes two separate sets of boxes: shared boxes -- which may be subject to garbage collection -- and unique boxes. The lifetime of an allocation in the heap depends on the lifetime of the box values pointing to it. Since box values may themselves be passed in and out of frames, or stored in the heap, heap allocations may outlive the frame they are allocated within. ### Memory ownership A task owns all memory it can *safely* reach through local variables, shared or unique boxes, and/or references. Sharing memory between tasks can only be accomplished using *unsafe* constructs, such as raw pointer operations or calling C code. When a task sends a value that has the `send` trait over a channel, it loses ownership of the value sent and can no longer refer to it. This is statically guaranteed by the combined use of "move semantics" and the compiler-checked _meaning_ of the `send` trait: it is only instantiated for (transitively) unique kinds of data constructor and pointers, never shared pointers. When a stack frame is exited, its local allocations are all released, and its references to boxes (both shared and owned) are dropped. A shared box may (in the case of a recursive, mutable shared type) be cyclic; in this case the release of memory inside the shared structure may be deferred until task-local garbage collection can reclaim it. Code can ensure no such delayed deallocation occurs by restricting itself to unique boxes and similar unshared kinds of data. When a task finishes, its stack is necessarily empty and it therefore has no references to any boxes; the remainder of its heap is immediately freed. ### Memory slots A task's stack contains slots. A _slot_ is a component of a stack frame. A slot is either a *local variable* or a *reference*. A _local variable_ (or *stack-local* allocation) holds a value directly, allocated within the stack's memory. The value is a part of the stack frame. A _reference_ references a value outside the frame. It may refer to a value allocated in another frame *or* a boxed value in the heap. The reference-formation rules ensure that the referent will outlive the reference. Local variables are immutable unless declared with `let mut`. The `mut` keyword applies to all local variables declared within that declaration (so `let mut x, y` declares two mutable variables, `x` and `y`). Local variables are not initialized when allocated; the entire frame worth of local variables are allocated at once, on frame-entry, in an uninitialized state. Subsequent statements within a function may or may not initialize the local variables. Local variables can be used only after they have been initialized; this is enforced by the compiler. References are created for function arguments. If the compiler can not prove that the referred-to value will outlive the reference, it will try to set aside a copy of that value to refer to. If this is not semantically safe (for example, if the referred-to value contains mutable fields), it will reject the program. If the compiler deems copying the value expensive, it will warn. A function can be declared to take an argument by mutable reference. This allows the function to write to the slot that the reference refers to. An example function that accepts an value by mutable reference: ~~~~~~~~ fn incr(&i: int) { i = i + 1; } ~~~~~~~~ ### Memory boxes A _box_ is a reference to a heap allocation holding another value. There are two kinds of boxes: *shared boxes* and *unique boxes*. A _shared box_ type or value is constructed by the prefix *at* sigil `@`. A _unique box_ type or value is constructed by the prefix *tilde* sigil `~`. Multiple shared box values can point to the same heap allocation; copying a shared box value makes a shallow copy of the pointer (optionally incrementing a reference count, if the shared box is implemented through reference-counting). Unique box values exist in 1:1 correspondence with their heap allocation; copying a unique box value makes a deep copy of the heap allocation and produces a pointer to the new allocation. An example of constructing one shared box type and value, and one unique box type and value: ~~~~~~~~ let x: @int = @10; let x: ~int = ~10; ~~~~~~~~ Some operations (such as field selection) implicitly dereference boxes. An example of an _implicit dereference_ operation performed on box values: ~~~~~~~~ let x = @{y: 10}; assert x.y == 10; ~~~~~~~~ Other operations act on box values as single-word-sized address values. For these operations, to access the value held in the box requires an explicit dereference of the box value. Explicitly dereferencing a box is indicated with the unary *star* operator `*`. Examples of such _explicit dereference_ operations are: * copying box values (`x = y`) * passing box values to functions (`f(x,y)`) An example of an explicit-dereference operation performed on box values: ~~~~~~~~ fn takes_boxed(b: @int) { } fn takes_unboxed(b: int) { } fn main() { let x: @int = @10; takes_boxed(x); takes_unboxed(*x); } ~~~~~~~~ ## Tasks An executing Rust program consists of a tree of tasks. A Rust _task_ consists of an entry function, a stack, a set of outgoing communication channels and incoming communication ports, and ownership of some portion of the heap of a single operating-system process. Multiple Rust tasks may coexist in a single operating-system process. The runtime scheduler maps tasks to a certain number of operating-system threads; by default a number of threads is used based on the number of concurrent physical CPUs detected at startup, but this can be changed dynamically at runtime. When the number of tasks exceeds the number of threads -- which is quite possible -- the tasks are multiplexed onto the threads ^[This is an M:N scheduler, which is known to give suboptimal results for CPU-bound concurrency problems. In such cases, running with the same number of threads as tasks can give better results. The M:N scheduling in Rust exists to support very large numbers of tasks in contexts where threads are too resource-intensive to use in a similar volume. The cost of threads varies substantially per operating system, and is sometimes quite low, so this flexibility is not always worth exploiting.] ### Communication between tasks With the exception of *unsafe* blocks, Rust tasks are isolated from interfering with one another's memory directly. Instead of manipulating shared storage, Rust tasks communicate with one another using a typed, asynchronous, simplex message-passing system. A _port_ is a communication endpoint that can *receive* messages. Ports receive messages from channels. A _channel_ is a communication endpoint that can *send* messages. Channels send messages to ports. Each port is implicitly boxed and mutable; as such a port has a unique per-task identity and cannot be replicated or transmitted. If a port value is copied, both copies refer to the *same* port. New ports can be constructed dynamically and stored in data structures. Each channel is bound to a port when the channel is constructed, so the destination port for a channel must exist before the channel itself. A channel cannot be rebound to a different port from the one it was constructed with. Channels are weak: a channel does not keep the port it is bound to alive. Ports are owned by their allocating task and cannot be sent over channels; if a task dies its ports die with it, and all channels bound to those ports no longer function. Messages sent to a channel connected to a dead port will be dropped. Channels are immutable types with meaning known to the runtime; channels can be sent over channels. Many channels can be bound to the same port, but each channel is bound to a single port. In other words, channels and ports exist in an N:1 relationship, N channels to 1 port. ^[It may help to remember nautical terminology when differentiating channels from ports. Many different waterways -- channels -- may lead to the same port.] Each port and channel can carry only one type of message. The message type is encoded as a parameter of the channel or port type. The message type of a channel is equal to the message type of the port it is bound to. The types of messages must satisfy the `send` built-in trait. Messages are generally sent asynchronously, with optional rate-limiting on the transmit side. Each port contains a message queue and sending a message over a channel merely means inserting it into the associated port's queue; message receipt is the responsibility of the receiving task. Messages are sent on channels and received on ports using standard library functions. ### Task lifecycle The _lifecycle_ of a task consists of a finite set of states and events that cause transitions between the states. The lifecycle states of a task are: * running * blocked * failing * dead A task begins its lifecycle -- once it has been spawned -- in the *running* state. In this state it executes the statements of its entry function, and any functions called by the entry function. A task may transition from the *running* state to the *blocked* state any time it makes a blocking receive call on a port, or attempts a rate-limited blocking send on a channel. When the communication expression can be completed -- when a message arrives at a sender, or a queue drains sufficiently to complete a rate-limited send -- then the blocked task will unblock and transition back to *running*. A task may transition to the *failing* state at any time, due being killed by some external event or internally, from the evaluation of a `fail` expression. Once *failing*, a task unwinds its stack and transitions to the *dead* state. Unwinding the stack of a task is done by the task itself, on its own control stack. If a value with a destructor is freed during unwinding, the code for the destructor is run, also on the task's control stack. Running the destructor code causes a temporary transition to a *running* state, and allows the destructor code to cause any subsequent state transitions. The original task of unwinding and failing thereby may suspend temporarily, and may involve (recursive) unwinding of the stack of a failed destructor. Nonetheless, the outermost unwinding activity will continue until the stack is unwound and the task transitions to the *dead* state. There is no way to "recover" from task failure. Once a task has temporarily suspended its unwinding in the *failing* state, failure occurring from within this destructor results in *hard* failure. The unwinding procedure of hard failure frees resources but does not execute destructors. The original (soft) failure is still resumed at the point where it was temporarily suspended. A task in the *dead* state cannot transition to other states; it exists only to have its termination status inspected by other tasks, and/or to await reclamation when the last reference to it drops. ### Task scheduling The currently scheduled task is given a finite *time slice* in which to execute, after which it is *descheduled* at a loop-edge or similar preemption point, and another task within is scheduled, pseudo-randomly. An executing task can yield control at any time, by making a library call to `core::task::yield`, which deschedules it immediately. Entering any other non-executing state (blocked, dead) similarly deschedules the task. ### Spawning tasks A call to `core::task::spawn`, passing a 0-argument function as its single argument, causes the runtime to construct a new task executing the passed function. The passed function is referred to as the _entry function_ for the spawned task, and any captured environment is carries is moved from the spawning task to the spawned task before the spawned task begins execution. The result of a `spawn` call is a `core::task::task` value. An example of a `spawn` call: ~~~~ let po = comm::Port(); let ch = comm::Chan(po); do task::spawn { // let task run, do other things // ... comm::send(ch, true); }; let result = comm::recv(po); ~~~~ ### Sending values into channels Sending a value into a channel is done by a library call to `core::comm::send`, which takes a channel and a value to send, and moves the value into the channel's outgoing buffer. An example of a send: ~~~~ let po = comm::Port(); let ch = comm::Chan(po); comm::send(ch, ~"hello, world"); ~~~~ ### Receiving values from ports Receiving a value is done by a call to the `recv` method on a value of type `core::comm::Port`. This call causes the receiving task to enter the *blocked reading* state until a value arrives in the port's receive queue, at which time the port deques a value to return, and un-blocks the receiving task. An example of a *receive*: ~~~~~~~~ # let po = comm::Port(); # let ch = comm::Chan(po); # comm::send(ch, ~""); let s = comm::recv(po); ~~~~~~~~ # Runtime services, linkage and debugging The Rust _runtime_ is a relatively compact collection of C and Rust code that provides fundamental services and datatypes to all Rust tasks at run-time. It is smaller and simpler than many modern language runtimes. It is tightly integrated into the language's execution model of memory, tasks, communication and logging. ### Memory allocation The runtime memory-management system is based on a _service-provider interface_, through which the runtime requests blocks of memory from its environment and releases them back to its environment when they are no longer in use. The default implementation of the service-provider interface consists of the C runtime functions `malloc` and `free`. The runtime memory-management system in turn supplies Rust tasks with facilities for allocating, extending and releasing stacks, as well as allocating and freeing boxed values. ### Built in types The runtime provides C and Rust code to assist with various built-in types, such as vectors, strings, and the low level communication system (ports, channels, tasks). Support for other built-in types such as simple types, tuples, records, and enums is open-coded by the Rust compiler. ### Task scheduling and communication The runtime provides code to manage inter-task communication. This includes the system of task-lifecycle state transitions depending on the contents of queues, as well as code to copy values between queues and their recipients and to serialize values for transmission over operating-system inter-process communication facilities. ### Logging system The runtime contains a system for directing [logging expressions](#log-expressions) to a logging console and/or internal logging buffers. Logging expressions can be enabled per module. Logging output is enabled by setting the `RUST_LOG` environment variable. `RUST_LOG` accepts a logging specification made up of a comma-separated list of paths, with optional log levels. For each module containing log expressions, if `RUST_LOG` contains the path to that module or a parent of that module, then logs of the appropriate level will be output to the console. The path to a module consists of the crate name, any parent modules, then the module itself, all separated by double colons (`::`). The optional log level can be appended to the module path with an equals sign (`=`) followed by the log level, from 0 to 3, inclusive. Level 0 is the error level, 1 is warning, 2 info, and 3 debug. Any logs less than or equal to the specified level will be output. If not specified then log level 3 is assumed. As an example, to see all the logs generated by the compiler, you would set `RUST_LOG` to `rustc`, which is the crate name (as specified in its `link` [attribute](#attributes)). To narrow down the logs to just crate resolution, you would set it to `rustc::metadata::creader`. To see just error logging use `rustc=0`. Note that when compiling either `.rs` or `.rc` files that don't specify a crate name the crate is given a default name that matches the source file, with the extension removed. In that case, to turn on logging for a program compiled from, e.g. `helloworld.rs`, `RUST_LOG` should be set to `helloworld`. As a convenience, the logging spec can also be set to a special psuedo-crate, `::help`. In this case, when the application starts, the runtime will simply output a list of loaded modules containing log expressions, then exit. The Rust runtime itself generates logging information. The runtime's logs are generated for a number of artificial modules in the `::rt` psuedo-crate, and can be enabled just like the logs for any standard module. The full list of runtime logging modules follows. * `::rt::mem` Memory management * `::rt::comm` Messaging and task communication * `::rt::task` Task management * `::rt::dom` Task scheduling * `::rt::trace` Unused * `::rt::cache` Type descriptor cache * `::rt::upcall` Compiler-generated runtime calls * `::rt::timer` The scheduler timer * `::rt::gc` Garbage collection * `::rt::stdlib` Functions used directly by the standard library * `::rt::kern` The runtime kernel * `::rt::backtrace` Log a backtrace on task failure * `::rt::callback` Unused # Appendix: Rationales and design tradeoffs *TODO*. # Appendix: Influences and further references ## Influences > The essential problem that must be solved in making a fault-tolerant > software system is therefore that of fault-isolation. Different programmers > will write different modules, some modules will be correct, others will have > errors. We do not want the errors in one module to adversely affect the > behaviour of a module which does not have any errors. > > — Joe Armstrong > In our approach, all data is private to some process, and processes can > only communicate through communications channels. *Security*, as used > in this paper, is the property which guarantees that processes in a system > cannot affect each other except by explicit communication. > > When security is absent, nothing which can be proven about a single module > in isolation can be guaranteed to hold when that module is embedded in a > system [...] > > — Robert Strom and Shaula Yemini > Concurrent and applicative programming complement each other. The > ability to send messages on channels provides I/O without side effects, > while the avoidance of shared data helps keep concurrent processes from > colliding. > > — Rob Pike Rust is not a particularly original language. It may however appear unusual by contemporary standards, as its design elements are drawn from a number of "historical" languages that have, with a few exceptions, fallen out of favour. Five prominent lineages contribute the most, though their influences have come and gone during the course of Rust's development: * The NIL (1981) and Hermes (1990) family. These languages were developed by Robert Strom, Shaula Yemini, David Bacon and others in their group at IBM Watson Research Center (Yorktown Heights, NY, USA). * The Erlang (1987) language, developed by Joe Armstrong, Robert Virding, Claes Wikström, Mike Williams and others in their group at the Ericsson Computer Science Laboratory (Älvsjö, Stockholm, Sweden) . * The Sather (1990) language, developed by Stephen Omohundro, Chu-Cheow Lim, Heinz Schmidt and others in their group at The International Computer Science Institute of the University of California, Berkeley (Berkeley, CA, USA). * The Newsqueak (1988), Alef (1995), and Limbo (1996) family. These languages were developed by Rob Pike, Phil Winterbottom, Sean Dorward and others in their group at Bell labs Computing Sciences Research Center (Murray Hill, NJ, USA). * The Napier (1985) and Napier88 (1988) family. These languages were developed by Malcolm Atkinson, Ron Morrison and others in their group at the University of St. Andrews (St. Andrews, Fife, UK). Additional specific influences can be seen from the following languages: * The stack-growth implementation of Go. * The structural algebraic types and compilation manager of SML. * The attribute and assembly systems of C#. * The deterministic destructor system of C++. * The typeclass system of Haskell. * The lexical identifier rule of Python. * The block syntax of Ruby.