Use a bitset instead of a hash map in HIR ID validator
The hashset insertion was slightly hot in incr patched runs, but it seems unnecessary to use a hashset here, as it just checks that a dense set of N integers was seen.
I'm not sure if it's possible to know the amount of items beforehand to preallocate the bitset? I suppose not.
lints: mostly translatable diagnostics
As lints are created slightly differently than other diagnostics, intended to try make them translatable first and then look into the applicability of diagnostic structs but ended up just making most of the diagnostics in the crate translatable (which will still be useful if I do make a lot of them structs later anyway).
r? ``@compiler-errors``
Rewrite dead-code pass to avoid fetching HIR.
This allows to get a more uniform handling of spans, and to simplify the grouping of diagnostics for variants and fields.
Accept `DiagnosticMessage` in `LintDiagnosticBuilder::build` so that
lints can be built with translatable diagnostic messages.
Signed-off-by: David Wood <david.wood@huawei.com>
Fixup missing renames from `#[main]` to `#[rustc_main]`
In #84217 `#[main]` was removed and replaced with `#[rustc_main]`. In some places the rename was forgotten, which makes the current code confusing, because at first glance it seems that `#[main]` is still around. Perform the renames also in these places.
I noticed this (after first being confused by it) when working on #97802.
r? `@petrochenkov`
(since you reviewed the other PR)
rustc_target: Remove some redundant target properties
`is_like_emscripten` is equivalent to `os == "emscripten"`, so it's removed.
`is_like_fuchsia` is equivalent to `os == "fuchsia"`, so it's removed.
`is_like_osx` also falls into the same category and is equivalent to `vendor == "apple"`, but it's commonly used so I kept it as is for now.
`is_like_(solaris,windows,wasm)` are combinations of different operating systems or architectures (see compiler/rustc_target/src/spec/tests/tests_impl.rs) so they are also kept as is.
I think `is_like_wasm` (and maybe `is_like_osx`) are sufficiently closed sets, so we can remove these fields as well and replace them with methods like `fn is_like_wasm() { arch == "wasm32" || arch == "wasm64" }`.
On other hand, `is_like_solaris` and `is_like_windows` are sufficiently open and I can imagine custom targets introducing other values for `os`.
This is kind of a gray area.
In fc357039f9 `#[main]` was removed and replaced with `#[rustc_main]`.
In some place the rename was forgotten, which makes the current code
confusing, because at first glance it seems that `#[main]` is still
around. Perform the renames also in these places.
add comments in `store_dead_field_or_variant`
support multiple log level
add a item ident label
fix ui tests
fix a ui test
fix a rustdoc ui test
use let chain
refactor: remove `store_dead_field_or_variant`
fix a tiny bug
The reference issue has been closed (the feature has been stabilized)
and things work fine without fine, it seems.
Signed-off-by: Yuki Okushi <jtitor@2k36.org>
Remove `rustc_deprecated` diagnostics
Follow-up on #95960. The diagnostics will remain until the next bootstrap, at which point people will have had six weeks to adjust.
``@rustbot`` label +A-diagnostics
r? ``@compiler-errors``
Make `ExprKind::Closure` a struct variant.
Simple refactor since we both need it to introduce additional fields in `ExprKind::Closure`.
r? ``@Aaron1011``
lint: add diagnostic translation migration lints
Introduce allow-by-default lints for checking whether diagnostics are written in
`SessionDiagnostic` or `AddSubdiagnostic` impls and whether diagnostics are translatable. These lints can be denied for modules once they are fully migrated to impls and translation.
These lints are intended to be temporary - once all diagnostics have been changed then we can just change the APIs we have and that will enforce these constraints thereafter.
r? `````@oli-obk`````
Introduce allow-by-default lints for checking whether diagnostics are
written in `SessionDiagnostic`/`AddSubdiagnostic` impls and whether
diagnostics are translatable. These lints can be denied for modules once
they are fully migrated to impls and translation.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit adds a new unstable attribute, `#[doc(tuple_varadic)]`, that
shows a 1-tuple as `(T, ...)` instead of just `(T,)`, and links to a section
in the tuple primitive docs that talks about these.
Allow unstable items to be re-exported unstably without requiring the feature be enabled
Closes#94972
The diagnostic may need some work still, and I haven't added a test yet
Remove migrate borrowck mode
Closes#58781Closes#43234
# Stabilization proposal
This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile.
Tracking issue: #43234
RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md
Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable).
## Motivation
Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors.
The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition.
In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker.
In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver.
While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff.
## What is stabilized
As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise.
There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](https://github.com/rust-lang/rust/issues/95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl.
As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions.
## What isn't stabilized
This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck.
## Tests
Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll`
## History
* On 2017-07-14, [tracking issue opened](https://github.com/rust-lang/rust/issues/43234)
* On 2017-07-20, [initial empty MIR pass added](https://github.com/rust-lang/rust/pull/43271)
* On 2017-08-29, [RFC opened](https://github.com/rust-lang/rfcs/pull/2094)
* On 2017-11-16, [Integrate MIR type-checker with NLL](https://github.com/rust-lang/rust/pull/45825)
* On 2017-12-20, [NLL feature complete](https://github.com/rust-lang/rust/pull/46862)
* On 2018-07-07, [Don't run AST borrowck on mir mode](https://github.com/rust-lang/rust/pull/52083)
* On 2018-07-27, [Add migrate mode](https://github.com/rust-lang/rust/pull/52681)
* On 2019-04-22, [Enable migrate mode on 2015 edition](https://github.com/rust-lang/rust/pull/59114)
* On 2019-08-26, [Don't downgrade errors on 2015 edition](https://github.com/rust-lang/rust/pull/64221)
* On 2019-08-27, [Remove AST borrowck](https://github.com/rust-lang/rust/pull/64790)
Add E0788 for improper #[no_coverage] usage
Essentially, this adds proper checking for the attribute (tracking issue #84605) and throws errors when it's put in obviously-wrong places, like on struct or const definitions. Most of the code is taken directly from the checks for the `#[inline]` attribute, since it's very similar.
Right now, the code only checks at the function level, but it seems reasonable to allow adding `#[no_coverage]` to individual blocks or expressions, so, for now those just throw `unused_attributes` warnings. Similarly, since there was a lot of desire to eventually allow recursive definitions as well on modules and impl blocks, these also throw `unused_attributes` instead of an error.
I'm not sure if anything has to be done since this error is technically for an unstable feature, but since an error for using unstable features will show up anyway, I think it's okay.
This is the first big piece needed for stabilising this attribute, although I personally would like to explore renaming it to `#[coverage(never)]` on a separate PR, which I will offer soon. There's a lot of discussion still to be had about that, which is why it will be kept separate.
I don't think much is needed besides adding this simple check and a UI test, but let me know if there's something else that should be added to make this happen.
Replace `#[default_method_body_is_const]` with `#[const_trait]`
pulled out of #96077
related issues: #67792 and #92158
cc `@fee1-dead`
This is groundwork to only allowing `impl const Trait` for traits that are marked with `#[const_trait]`. This is necessary to prevent adding a new default method from becoming a breaking change (as it could be a non-const fn).
Add support for embedding pretty printers via `#[debugger_visualizer]` attribute
Initial support for [RFC 3191](https://github.com/rust-lang/rfcs/pull/3191) in PR https://github.com/rust-lang/rust/pull/91779 was scoped to supporting embedding NatVis files using a new attribute. This PR implements the pretty printer support as stated in the RFC mentioned above.
This change includes embedding pretty printers in the `.debug_gdb_scripts` just as the pretty printers for rustc are embedded today. Also added additional tests for embedded pretty printers. Additionally cleaned up error checking so all error checking is done up front regardless of the current target.
RFC: https://github.com/rust-lang/rfcs/pull/3191
Ensure all error checking for `#[debugger_visualizer]` is done up front and not when the `debugger_visualizer` query is run.
Clean up potential ODR violations when embedding pretty printers into the `__rustc_debug_gdb_scripts_section__` section.
Respond to PR comments and update documentation.
Move the extended lifetime resolution into typeck context
Related to #15023
This PR is based on the [idea](https://github.com/rust-lang/rust/issues/15023#issuecomment-1070931433) of #15023 by `@nikomatsakis.`
This PR specifically proposes to
- Delay the resolution of scopes of rvalues to a later stage, so that enough type information is available to refine those scopes based on relationships of lifetimes.
- Highlight relevant parts that would help future reviews on the next installments of works to fully implement a solution to RFC 66.
Implement proper stability check for const impl Trait, fall back to unstable const when undeclared
Continuation of #93960
`@jhpratt` it looks to me like the test was simply not testing for the failure you were looking for? Your checks actually do the right thing for const traits?
This alters the diagnostics a bit, as the trait method is still stable.
The only thing this check does is ensure that compilation fails if a
trait implementation is declared const-stable.
Rather than deferring to const eval for checking if a trait is const, we
now check up-front. This allows the error to be emitted earlier, notably
at the same time as other stability checks.
Also included in this commit is a change of the default const stability
level to UNstable. Previously, an item that was `const` but did not
explicitly state it was unstable was implicitly stable.
Add a query for checking whether a function is an intrinsic.
work towards #93145
This will reduce churn when we add more ways to declare intrinsics
r? `@scottmcm`
Cleanup `DebuggerVisualizerFile` type and other minor cleanup of queries.
Merge the queries for debugger visualizers into a single query.
Revert move of `resolve_path` to `rustc_builtin_macros`. Update dependencies in Cargo.toml for `rustc_passes`.
Respond to PR comments. Load visualizer files into opaque bytes `Vec<u8>`. Debugger visualizers for dynamically linked crates should not be embedded in the current crate.
Update the unstable book with the new feature. Add the tracking issue for the debugger_visualizer feature.
Respond to PR comments and minor cleanups.
Only crate root def-ids don't have a parent, and in majority of cases the argument of `DefIdTree::parent` cannot be a crate root.
So we now panic by default in `parent` and introduce a new non-panicing function `opt_parent` for cases where the argument can be a crate root.
Same applies to `local_parent`/`opt_local_parent`.
Generate synthetic object file to ensure all exported and used symbols participate in the linking
Fix#50007 and #47384
This is the synthetic object file approach that I described in https://github.com/rust-lang/rust/pull/95363#issuecomment-1079932354, allowing all exported and used symbols to be linked while still allowing them to be GCed.
Related #93791, #95363
r? `@petrochenkov`
cc `@carbotaniuman`
Add `BoundKind` in `visit_param_bounds` to check questions in bounds
From the FIXME in the impl of `AstValidator`. Better bound checks by adding `BoundCtxt` type parameter to `visit_param_bound`
cc `@ecstatic-morse`
Stop using CRATE_DEF_INDEX outside of metadata encoding.
`CRATE_DEF_ID` and `CrateNum::as_def_id` are almost always what we want. We should not manipulate raw `DefIndex` outside of metadata encoding.
Refactor HIR item-like traversal (part 1)
Issue #95004
- Create hir_crate_items query which traverses tcx.hir_crate(()).owners to return a hir::ModuleItems
- use tcx.hir_crate_items in tcx.hir().items() to return an iterator of hir::ItemId
- use tcx.hir_crate_items to introduce a tcx.hir().par_items(impl Fn(hir::ItemId)) to traverse all items in parallel;
Signed-off-by: Miguel Guarniz <mi9uel9@gmail.com>
cc `@cjgillot`
Implement sym operands for global_asm!
Tracking issue: #93333
This PR is pretty much a complete rewrite of `sym` operand support for inline assembly so that the same implementation can be shared by `asm!` and `global_asm!`. The main changes are:
- At the AST level, `sym` is represented as a special `InlineAsmSym` AST node containing a path instead of an `Expr`.
- At the HIR level, `sym` is split into `SymStatic` and `SymFn` depending on whether the path resolves to a static during AST lowering (defaults to `SynFn` if `get_early_res` fails).
- `SymFn` is just an `AnonConst`. It runs through typeck and we just collect the resulting type at the end. An error is emitted if the type is not a `FnDef`.
- `SymStatic` directly holds a path and the `DefId` of the `static` that it is pointing to.
- The representation at the MIR level is mostly unchanged. There is a minor change to THIR where `SymFn` is a constant instead of an expression.
- At the codegen level we need to apply the target's symbol mangling to the result of `tcx.symbol_name()` depending on the target. This is done by calling the LLVM name mangler, which handles all of the details.
- On Mach-O, all symbols have a leading underscore.
- On x86 Windows, different mangling is used for cdecl, stdcall, fastcall and vectorcall.
- No mangling is needed on other platforms.
r? `@nagisa`
cc `@eddyb`
check_doc_alias_value: get argument as Symbol to prevent needless string convertions
check_doc_attrs: don't alloc vec, iterate over slice. Vec introduced in #83149, but no perf run posted on merge
replace as_str() check with symbol check
get_single_str_from_tts: don't prealloc string
trivial string to str replace
LifetimeScopeForPath::NonElided use Vec<Symbol> instead of Vec<String>
AssertModuleSource use BTreeSet<Symbol> instead of BTreeSet<String>
CrateInfo.crate_name replace FxHashMap<CrateNum, String> with FxHashMap<CrateNum, Symbol>
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
Don't emit non-asm contents error for naked function composed of errors
## Motivation
For naked functions an error is emitted when they are composed of anything other than a single asm!() block. However, this error triggers in a couple situations in which it adds no additional information or is actively misleading.
One example is if you do have an asm!() block but simply one with a syntax error:
```rust
#[naked]
unsafe extern "C" fn compiler_errors() {
asm!(invalid_syntax)
}
```
This results in two errors, one for the syntax error itself and another telling you that you need an asm block in your function:
```rust
error[E0787]: naked functions must contain a single asm block
--> src/main.rs:6:1
|
6 | / unsafe extern "C" fn naked_compile_error() {
7 | | asm!(blah)
8 | | }
| |_^
```
This issue also comes up when [utilizing `compile_error!()` for improving your diagnostics](https://twitter.com/steveklabnik/status/1509538243020218372), such as raising a compiler error when compiling for an unsupported target.
## Implementation
The rules this PR implements are as follows:
1. If any non-erroneous non-asm statement is included, an error will still occur
2. If multiple asm statements are included, an error will still occur
3. If 0 or 1 asm statements are present, as well as any non-zero number of erroneous statements, then this error will *not* be raised as it is likely either redundant or incorrect
The rule of thumb is effectively "if an error is present and its correction could change things, don't raise an error".
Add error message suggestion for missing noreturn in naked function
I had to google the syntax for inline asm's `noreturn` option when I got this error earlier today, so I figured I'd save others the trouble and add the syntax/fix as a suggestion in the error.
Handle rustc_const_stable attribute in library feature collector
The library feature collector in [compiler/rustc_passes/src/lib_features.rs](551b4fa395/compiler/rustc_passes/src/lib_features.rs) has only been looking at `#[stable(…)]`, `#[unstable(…)]`, and `#[rustc_const_unstable(…)]` attributes, while ignoring `#[rustc_const_stable(…)]`. The consequences of this were:
- When any const feature got stabilized (changing one or more `rustc_const_unstable` to `rustc_const_stable`), users who had previously enabled that unstable feature using `#![feature(…)]` would get told "unknown feature", rather than rustc's nicer "the feature … has been stable since … and no longer requires an attribute to enable".
This can be seen in the way that https://github.com/rust-lang/rust/pull/93957#issuecomment-1079794660 failed after rebase:
```console
error[E0635]: unknown feature `const_ptr_offset`
--> $DIR/offset_from_ub.rs:1:35
|
LL | #![feature(const_ptr_offset_from, const_ptr_offset)]
| ^^^^^^^^^^^^^^^^
```
- We weren't enforcing that a particular feature is either stable everywhere or unstable everywhere, and that a feature that has been stabilized has the same stabilization version everywhere, both of which we enforce for the other stability attributes.
This PR updates the library feature collector to handle `rustc_const_stable`, and fixes places in the standard library and test suite where `rustc_const_stable` was being used in a way that does not meet the rules for a stability attribute.
Spellchecking compiler comments
This PR cleans up the rest of the spelling mistakes in the compiler comments. This PR does not change any literal or code spelling issues.
Remember mutability in `DefKind::Static`.
This allows to compute the `BodyOwnerKind` from `DefKind` only, and
removes a direct dependency of some MIR queries onto HIR.
As a side effect, it also simplifies metadata, since we don't need 4
flavours of `EntryKind::*Static` any more.
This allows to compute the `BodyOwnerKind` from `DefKind` only, and
removes a direct dependency of some MIR queries onto HIR.
As a side effect, it also simplifies metadata, since we don't need 4
flavours of `EntryKind::*Static` any more.
There are a few places were we have to construct it, though, and a few
places that are more invasive to change. To do this, we create a
constructor with a long obvious name.
This commit makes `AdtDef` use `Interned`. Much the commit is tedious
changes to introduce getter functions. The interesting changes are in
`compiler/rustc_middle/src/ty/adt.rs`.
Merge `#[deprecated]` and `#[rustc_deprecated]`
The first commit makes "reason" an alias for "note" in `#[rustc_deprecated]`, while still prohibiting it in `#[deprecated]`.
The second commit changes "suggestion" to not just be a feature of `#[rustc_deprecated]`. This is placed behind the new `deprecated_suggestion` feature. This needs a tracking issue; let me know if this PR will be approved and I can create one.
The third commit is what permits `#[deprecated]` to be used when `#![feature(staged_api)]` is enabled. This isn't yet used in stdlib (only tests), as it would require duplicating all deprecation attributes until a bootstrap occurs. I intend to submit a follow-up PR that replaces all uses and removes the remaining `#[rustc_deprecated]` code after the next bootstrap.
`@rustbot` label +T-libs-api +C-feature-request +A-attributes +S-waiting-on-review
Emit `unused_attributes` if a level attr only has a reason
Fixes a comment from `compiler/rustc_lint/src/levels.rs`. Lint level attributes that only contain a reason will also trigger the `unused_attribute` lint. The lint now also checks for the `expect` lint level.
That's it, have a great rest of the day for everyone reasoning this 🙃
cc: #55112
Do not point at whole file missing `fn main`
Only point at the end of the crate. We could try making it point at the
beginning of the crate, but that is confused with `DUMMY_SP`, causing
the output to be *worse*.
This change will make it so that VSCode will *not* underline the whole
file when `main` is missing, so other errors will be visible.
Only point at the end of the crate. We could try making it point at the
beginning of the crate, but that is confused with `DUMMY_SP`, causing
the output to be *worse*.
This change will make it so that VSCode will *not* underline the whole
file when `main` is missing, so other errors will be visible.
Lint against more useless `#[must_use]` attributes
This expands the existing `#[must_use]` check in `unused_attributes` to lint against pretty much everything `#[must_use]` doesn't support.
Fixes#93906.
This expands the existing `#[must_use]` check in `unused_attributes`
to lint against pretty much everything `#[must_use]` doesn't support.
Fixes#93906.
rustc_errors: let `DiagnosticBuilder::emit` return a "guarantee of emission".
That is, `DiagnosticBuilder` is now generic over the return type of `.emit()`, so we'll now have:
* `DiagnosticBuilder<ErrorReported>` for error (incl. fatal/bug) diagnostics
* can only be created via a `const L: Level`-generic constructor, that limits allowed variants via a `where` clause, so not even `rustc_errors` can accidentally bypass this limitation
* asserts `diagnostic.is_error()` on emission, just in case the construction restriction was bypassed (e.g. by replacing the whole `Diagnostic` inside `DiagnosticBuilder`)
* `.emit()` returns `ErrorReported`, as a "proof" token that `.emit()` was called
(though note that this isn't a real guarantee until after completing the work on
#69426)
* `DiagnosticBuilder<()>` for everything else (warnings, notes, etc.)
* can also be obtained from other `DiagnosticBuilder`s by calling `.forget_guarantee()`
This PR is a companion to other ongoing work, namely:
* #69426
and it's ongoing implementation:
#93222
the API changes in this PR are needed to get statically-checked "only errors produce `ErrorReported` from `.emit()`", but doesn't itself provide any really strong guarantees without those other `ErrorReported` changes
* #93244
would make the choices of API changes (esp. naming) in this PR fit better overall
In order to be able to let `.emit()` return anything trustable, several changes had to be made:
* `Diagnostic`'s `level` field is now private to `rustc_errors`, to disallow arbitrary "downgrade"s from "some kind of error" to "warning" (or anything else that doesn't cause compilation to fail)
* it's still possible to replace the whole `Diagnostic` inside the `DiagnosticBuilder`, sadly, that's harder to fix, but it's unlikely enough that we can paper over it with asserts on `.emit()`
* `.cancel()` now consumes `DiagnosticBuilder`, preventing `.emit()` calls on a cancelled diagnostic
* it's also now done internally, through `DiagnosticBuilder`-private state, instead of having a `Level::Cancelled` variant that can be read (or worse, written) by the user
* this removes a hazard of calling `.cancel()` on an error then continuing to attach details to it, and even expect to be able to `.emit()` it
* warnings were switched to *only* `can_emit_warnings` on emission (instead of pre-cancelling early)
* `struct_dummy` was removed (as it relied on a pre-`Cancelled` `Diagnostic`)
* since `.emit()` doesn't consume the `DiagnosticBuilder` <sub>(I tried and gave up, it's much more work than this PR)</sub>,
we have to make `.emit()` idempotent wrt the guarantees it returns
* thankfully, `err.emit(); err.emit();` can return `ErrorReported` both times, as the second `.emit()` call has no side-effects *only* because the first one did do the appropriate emission
* `&mut Diagnostic` is now used in a lot of function signatures, which used to take `&mut DiagnosticBuilder` (in the interest of not having to make those functions generic)
* the APIs were already mostly identical, allowing for low-effort porting to this new setup
* only some of the suggestion methods needed some rework, to have the extra `DiagnosticBuilder` functionality on the `Diagnostic` methods themselves (that change is also present in #93259)
* `.emit()`/`.cancel()` aren't available, but IMO calling them from an "error decorator/annotator" function isn't a good practice, and can lead to strange behavior (from the caller's perspective)
* `.downgrade_to_delayed_bug()` was added, letting you convert any `.is_error()` diagnostic into a `delay_span_bug` one (which works because in both cases the guarantees available are the same)
This PR should ideally be reviewed commit-by-commit, since there is a lot of fallout in each.
r? `@estebank` cc `@Manishearth` `@nikomatsakis` `@mark-i-m`
Require const stability attribute on all stable functions that are `const`
This PR requires all stable functions (of all kinds) that are `const fn` to have a `#[rustc_const_stable]` or `#[rustc_const_unstable]` attribute. Stability was previously implied if omitted; a follow-up PR is planned to change the fallback to be unstable.
Make dead code check a query.
Dead code check is run for each invocation of the compiler, even if no modifications were involved.
This PR makes dead code check a query keyed on the module. This allows to skip the check when a module has not changed.
To perform this, a query `live_symbols_and_ignored_derived_traits` is introduced to encapsulate the global analysis of finding live symbols. The second query `check_mod_deathness` outputs diagnostics for each module based on this first query's results.
Transition unsupported naked functions future incompatibility lint into
an error:
* Naked functions must contain a single inline assembly block.
Introduced as future incompatibility lint in 1.50 #79653.
Change into an error fixes a soundness issue described in #32489.
* Naked functions must not use any forms of inline attribute.
Introduced as future incompatibility lint in 1.56 #87652.
Introduce drop range tracking to generator interior analysis
This PR addresses cases such as this one from #57478:
```rust
struct Foo;
impl !Send for Foo {}
let _: impl Send = || {
let guard = Foo;
drop(guard);
yield;
};
```
Previously, the `generator_interior` pass would unnecessarily include the type `Foo` in the generator because it was not aware of the behavior of `drop`. We fix this issue by introducing a drop range analysis that finds portions of the code where a value is guaranteed to be dropped. If a value is dropped at all suspend points, then it is no longer included in the generator type. Note that we are using "dropped" in a generic sense to include any case in which a value has been moved. That is, we do not only look at calls to the `drop` function.
There are several phases to the drop tracking algorithm, and we'll go into more detail below.
1. Use `ExprUseVisitor` to find values that are consumed and borrowed.
2. `DropRangeVisitor` uses consume and borrow information to gather drop and reinitialization events, as well as build a control flow graph.
3. We then propagate drop and reinitialization information through the CFG until we reach a fix point (see `DropRanges::propagate_to_fixpoint`).
4. When recording a type (see `InteriorVisitor::record`), we check the computed drop ranges to see if that value is definitely dropped at the suspend point. If so, we skip including it in the type.
## 1. Use `ExprUseVisitor` to find values that are consumed and borrowed.
We use `ExprUseVisitor` to identify the places where values are consumed. We track both the `hir_id` of the value, and the `hir_id` of the expression that consumes it. For example, in the expression `[Foo]`, the `Foo` is consumed by the array expression, so after the array expression we can consider the `Foo` temporary to be dropped.
In this process, we also collect values that are borrowed. The reason is that the MIR transform for generators conservatively assumes anything borrowed is live across a suspend point (see `rustc_mir_transform::generator::locals_live_across_suspend_points`). We match this behavior here as well.
## 2. Gather drop events, reinitialization events, and control flow graph
After finding the values of interest, we perform a post-order traversal over the HIR tree to find the points where these values are dropped or reinitialized. We use the post-order index of each event because this is how the existing generator interior analysis refers to the position of suspend points and the scopes of variables.
During this traversal, we also record branching and merging information to handle control flow constructs such as `if`, `match`, and `loop`. This is necessary because values may be dropped along some control flow paths but not others.
## 3. Iterate to fixed point
The previous pass found the interesting events and locations, but now we need to find the actual ranges where things are dropped. Upon entry, we have a list of nodes ordered by their position in the post-order traversal. Each node has a set of successors. For each node we additionally keep a bitfield with one bit per potentially consumed value. The bit is set if we the value is dropped along all paths entering this node.
To compute the drop information, we first reverse the successor edges to find each node's predecessors. Then we iterate through each node, and for each node we set its dropped value bitfield to the intersection of all incoming dropped value bitfields.
If any bitfield for any node changes, we re-run the propagation loop again.
## 4. Ignore dropped values across suspend points
At this point we have a data structure where we can ask whether a value is guaranteed to be dropped at any post order index for the HIR tree. We use this information in `InteriorVisitor` to check whether a value in question is dropped at a particular suspend point. If it is, we do not include that value's type in the generator type.
Note that we had to augment the region scope tree to include all yields in scope, rather than just the last one as we did before.
r? `@nikomatsakis`
This change adds the basic infrastructure for tracking drop ranges in
generator interior analysis, which allows us to exclude dropped types
from the generator type.
Not yet complete, but many of the async/await and generator tests pass.
The main missing piece is tracking branching control flow (e.g. around
an `if` expression). The patch does include support, however, for
multiple yields in th e same block.
Issue #57478
Avoid unnecessary monomorphization of inline asm related functions
This should reduce build time for codegen backends by avoiding duplicated monomorphization of certain inline asm related functions for each passed in closure type.
Add some more attribute validation
This adds some more validation for the position of attributes:
* `link` is only valid on an `extern` block
* `windows_subsystem` and `no_builtins` are only valid at the crate level
Replace `NestedVisitorMap` with generic `NestedFilter`
This is an attempt to make the `intravisit::Visitor` API simpler and "more const" with regard to nested visiting.
With this change, `intravisit::Visitor` does not visit nested things by default, unless you specify `type NestedFilter = nested_filter::OnlyBodies` (or `All`). `nested_visit_map` returns `Self::Map` instead of `NestedVisitorMap<Self::Map>`. It panics by default (unreachable if `type NestedFilter` is omitted).
One somewhat trixty thing here is that `nested_filter::{OnlyBodies, All}` live in `rustc_middle` so that they may have `type Map = map::Map` and so that `impl Visitor`s never need to specify `type Map` - it has a default of `Self::NestedFilter::Map`.
Remove deprecated LLVM-style inline assembly
The `llvm_asm!` was deprecated back in #87590 1.56.0, with intention to remove
it once `asm!` was stabilized, which already happened in #91728 1.59.0. Now it
is time to remove `llvm_asm!` to avoid continued maintenance cost.
Closes#70173.
Closes#92794.
Closes#87612.
Closes#82065.
cc `@rust-lang/wg-inline-asm`
r? `@Amanieu`
expand: Pick `cfg`s and `cfg_attrs` one by one, like other attributes
This is a rebase of https://github.com/rust-lang/rust/pull/83354, but without any language-changing parts ~(except for https://github.com/rust-lang/rust/pull/84110)~, i.e. the attribute expansion order is the same.
This is a pre-requisite for any other changes making cfg attributes closer to regular macro attributes
- Possibly changing their expansion order (https://github.com/rust-lang/rust/issues/83331)
- Keeping macro backtraces for cfg attributes, or otherwise making them visible after expansion without keeping them in place literally (https://github.com/rust-lang/rust/pull/84110).
Two exceptions to the "one by one" behavior are:
- cfgs eagerly expanded by `derive` and `cfg_eval`, they are still expanded in a batch, that's by design.
- cfgs at the crate root, they are currently expanded not during the main expansion pass, but before that, during `#![feature]` collection. I'll try to disentangle that logic later in a separate PR.
r? `@Aaron1011`
Closure capture cleanup & refactor
Follow up of #89648
Each commit is self-contained and the rationale/changes are documented in the commit message, so it's advisable to review commit by commit.
The code is significantly cleaner (at least IMO), but that could have some perf implication, so I'd suggest a perf run.
r? `@wesleywiser`
cc `@arora-aman`
Remove `SymbolStr`
This was originally proposed in https://github.com/rust-lang/rust/pull/74554#discussion_r466203544. As well as removing the icky `SymbolStr` type, it allows the removal of a lot of `&` and `*` occurrences.
Best reviewed one commit at a time.
r? `@oli-obk`
Implement let-else type annotations natively
Tracking issue: #87335Fixes#89688, fixes#89807, edit: fixes #89960 as well
As explained in https://github.com/rust-lang/rust/issues/89688#issuecomment-940405082, the previous desugaring moved the let-else scrutinee into a dummy variable, which meant if you wanted to refer to it again in the else block, it had moved.
This introduces a new hir type, ~~`hir::LetExpr`~~ `hir::Let`, which takes over all the fields of `hir::ExprKind::Let(...)` and adds an optional type annotation. The `hir::Let` is then treated like a `hir::Local` when type checking a function body, specifically:
* `GatherLocalsVisitor` overrides a new `Visitor::visit_let_expr` and does pretty much exactly what it does for `visit_local`, assigning a local type to the `hir::Let` ~~(they could be deduplicated but they are right next to each other, so at least we know they're the same)~~
* It reuses the code in `check_decl_local` to typecheck the `hir::Let`, simply returning 'bool' for the expression type after doing that.
* ~~`FnCtxt::check_expr_let` passes this local type in to `demand_scrutinee_type`, and then imitates check_decl_local's pattern checking~~
* ~~`demand_scrutinee_type` (the blindest change for me, please give this extra scrutiny) uses this local type instead of of creating a new one~~
* ~~Just realised the `check_expr_with_needs` was passing NoExpectation further down, need to pass the type there too. And apparently this Expectation API already exists.~~
Some other misc notes:
* ~~Is the clippy code supposed to be autoformatted? I tried not to give huge diffs but maybe some rustfmt changes simply haven't hit it yet.~~
* in `rustc_ast_lowering/src/block.rs`, I noticed some existing `self.alias_attrs()` calls in `LoweringContext::lower_stmts` seem to be copying attributes from the lowered locals/etc to the statements. Is that right? I'm new at this, I don't know.
Stabilize `iter::zip`
Hello all!
As the tracking issue (#83574) for `iter::zip` completed the final commenting period without any concerns being raised, I hereby submit this stabilization PR on the issue.
As the pull request that introduced the feature (#82917) states, the `iter::zip` function is a shorter way to zip two iterators. As it's generally a quality-of-life/ergonomic improvement, it has been integrated into the codebase without any trouble, and has been
used in many places across the rust compiler and standard library since March without any issues.
For more details, I would refer to `@cuviper's` original PR, or the [function's documentation](https://doc.rust-lang.org/std/iter/fn.zip.html).
Tweak errors coming from `for`-loop, `?` and `.await` desugaring
* Suggest removal of `.await` on non-`Future` expression
* Keep track of obligations introduced by desugaring
* Remove span pointing at method for obligation errors coming from desugaring
* Point at called local sync `fn` and suggest making it `async`
```
error[E0277]: `()` is not a future
--> $DIR/unnecessary-await.rs:9:10
|
LL | boo().await;
| -----^^^^^^ `()` is not a future
| |
| this call returns `()`
|
= help: the trait `Future` is not implemented for `()`
help: do not `.await` the expression
|
LL - boo().await;
LL + boo();
|
help: alternatively, consider making `fn boo` asynchronous
|
LL | async fn boo () {}
| +++++
```
Fix#66731.
tidy run
update invalid crate attributes, improve error
update test outputs
de-capitalise error
update tests
Update invalid crate attributes, add help message
Update - generate span without using BytePos
Add correct dependancies
Update - generate suggestion without BytePos
Tidy run
update tests
Generate Suggestion without BytePos
Add all builtin attributes
add err builtin inner attr at top of crate
fix tests
add err builtin inner attr at top of crate
tidy fix
add err builtin inner attr at top of crate
Take a LocalDefId in expect_*item.
Items and item-likes are always HIR owners.
When trying to find such nodes, there is no ambiguity, the `LocalDefId` and the `HirId::owner` always match.
In such cases, `local_def_id_to_hir_id` does not carry any meaningful information, so we can just skip calling it altogether.
Various fixes for const_trait_impl
A few problems I found while making `Iterator` easier to const-implement.
1. More generous `~const Drop` check.
We check for nested fields with caller bounds.
For example, an ADT type with fields of types `A`, `B`, `C`, check if all of them are either:
- Bounded (`A: ~const Drop`, `B: Copy`)
- Known to be able to destruct at compile time (`C = i32`, `struct C(i32)`, `C = some_fn`)
2. Don't treat trait functions marked with `#[default_method_body_is_const]` as stable const fns when checking `const_for` and `const_try` feature gates.
I think anyone can review this, so no r? this time.
