They are two different ways of creating dummy results, with two
different purposes. Their implementations are separate except for
crates, where `DummyResult` depends on `DummyAstNode`.
This commit removes that dependency, so they are now fully separate. It
also expands the comment on `DummyAstNode`.
Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
Detect more cases of `=` to `:` typo
When a `Local` is fully parsed, but not followed by a `;`, keep the `:` span arround and mention it. If the type could continue being parsed as an expression, suggest replacing the `:` with a `=`.
```
error: expected one of `!`, `+`, `->`, `::`, `;`, or `=`, found `.`
--> file.rs:2:32
|
2 | let _: std::env::temp_dir().join("foo");
| - ^ expected one of `!`, `+`, `->`, `::`, `;`, or `=`
| |
| while parsing the type for `_`
| help: use `=` if you meant to assign
```
Fix#119665.
When a `Local` is fully parsed, but not followed by a `;`, keep the `:` span
arround and mention it. If the type could continue being parsed as an
expression, suggest replacing the `:` with a `=`.
```
error: expected one of `!`, `+`, `->`, `::`, `;`, or `=`, found `.`
--> file.rs:2:32
|
2 | let _: std::env::temp_dir().join("foo");
| - ^ expected one of `!`, `+`, `->`, `::`, `;`, or `=`
| |
| while parsing the type for `_`
| help: use `=` if you meant to assign
```
Fix#119665.
Add newtypes for bool fields/params/return types
Fixed all the cases of this found with some simple searches for `*/ bool` and `bool /*`; probably many more
`Rustc::emit_diagnostic` reconstructs a diagnostic passed in from the
macro machinery. Currently it uses the type `DiagnosticBuilder<'_,
ErrorGuaranteed>`, which is incorrect, because the diagnostic might be a
warning. And if it is a warning, because of the `ErrorGuaranteed` we end
up calling into `emit_producing_error_guaranteed` and the assertion
within that function (correctly) fails because the level is not an error
level.
The fix is simple: change the type to `DiagnosticBuilder<'_, ()>`. Using
`()` works no matter what the diagnostic level is, and we don't need an
`ErrorGuaranteed` here.
The panic was reported in #120576.
Overhaul `Diagnostic` and `DiagnosticBuilder`
Implements the first part of https://github.com/rust-lang/compiler-team/issues/722, which moves functionality and use away from `Diagnostic`, onto `DiagnosticBuilder`.
Likely follow-ups:
- Move things around, because this PR was written to minimize diff size, so some things end up in sub-optimal places. E.g. `DiagnosticBuilder` has impls in both `diagnostic.rs` and `diagnostic_builder.rs`.
- Rename `Diagnostic` as `DiagInner` and `DiagnosticBuilder` as `Diag`.
r? `@davidtwco`
Allow AST and HIR visitors to return `ControlFlow`
Alternative to #108598.
Since rust-lang/libs-team#187 was rejected, this implements our own version of the `Try` trait (`VisitorResult`) and the `try` macro (`try_visit`). Since this change still allows visitors to return `()`, no changes have been made to the existing ones. They can be done in a separate PR.
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
There are lots of functions that modify a diagnostic. This can be via a
`&mut Diagnostic` or a `&mut DiagnosticBuilder`, because the latter type
wraps the former and impls `DerefMut`.
This commit converts all the `&mut Diagnostic` occurrences to `&mut
DiagnosticBuilder`. This is a step towards greatly simplifying
`Diagnostic`. Some of the relevant function are made generic, because
they deal with both errors and warnings. No function bodies are changed,
because all the modifier methods are available on both `Diagnostic` and
`DiagnosticBuilder`.
macro_rules: Preserve all metavariable spans in a global side table
This PR preserves spans of `tt` metavariables used to pass tokens to declarative macros.
Such metavariable spans can then be used in span combination operations like `Span::to` to improve all kinds of diagnostics.
Spans of non-`tt` metavariables are currently kept in nonterminal tokens, but the long term plan is remove all nonterminal tokens from rustc parser and rely on the proc macro model with invisible delimiters (#114647, #67062).
In particular, `NtIdent` nonterminal (corresponding to `ident` metavariables) becomes easy to remove when this PR lands (#119412 does it).
The metavariable spans are kept in a global side table keyed by `Span`s of original tokens.
The alternative to the side table is keeping them in `SpanData` instead, but the performance regressions would be large because any spans from tokens passed to declarative macros would stop being inline and would work through span interner instead, and the penalty would be paid even if we never use the metavar span for the given original span.
(But also see the comment on `fn maybe_use_metavar_location` describing the map collision issues with the side table approach.)
There are also other alternatives - keeping the metavar span in `Token` or `TokenTree`, but associating it with `Span` itsel is the most natural choice because metavar spans are used in span combining operations, and those operations are not necessarily tied to tokens.
errors: only eagerly translate subdiagnostics
Subdiagnostics don't need to be lazily translated, they can always be eagerly translated. Eager translation is slightly more complex as we need to have a `DiagCtxt` available to perform the translation, which involves slightly more threading of that context.
This slight increase in complexity should enable later simplifications - like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages into the diagnostic structs rather than having them in separate files (working on that was what led to this change).
r? ```@nnethercote```
Add an ErrorGuaranteed to ast::TyKind::Err (attempt 2)
This makes it more like `hir::TyKind::Err`, and avoids a `has_errors` assertion in `LoweringContext::lower_ty_direct`.
r? ```@oli-obk```
Subdiagnostics don't need to be lazily translated, they can always be
eagerly translated. Eager translation is slightly more complex as we need
to have a `DiagCtxt` available to perform the translation, which involves
slightly more threading of that context.
This slight increase in complexity should enable later simplifications -
like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages
into the diagnostic structs rather than having them in separate files
(working on that was what led to this change).
Signed-off-by: David Wood <david@davidtw.co>
This mostly works well, and eliminates a couple of delayed bugs.
One annoying thing is that we should really also add an
`ErrorGuaranteed` to `proc_macro::bridge::LitKind::Err`. But that's
difficult because `proc_macro` doesn't have access to `ErrorGuaranteed`,
so we have to fake it.
This makes it more like `hir::TyKind::Err`, and avoids a
`span_delayed_bug` call in `LoweringContext::lower_ty_direct`.
It also requires adding `ast::TyKind::Dummy`, now that
`ast::TyKind::Err` can't be used for that purpose in the absence of an
error emission.
There are a couple of cases that aren't as neat as I would have liked,
marked with `FIXME` comments.
For some cases where it's clear that an error has already occurred,
e.g.:
- there's a comment stating exactly that, or
- things like HIR lowering, where we are lowering an error kind
The commit also tweaks some comments around delayed bug sites.
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
Remove various `has_errors` or `err_count` uses
follow up to https://github.com/rust-lang/rust/pull/119895
r? `@nnethercote` since you recently did something similar.
There are so many more of these, but I wanted to get a PR out instead of growing the commit list indefinitely. The commits all work on their own and can be reviewed commit by commit.
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
Builtin macros effectively have implicit #[collapse_debuginfo(yes)]
If collapse_debuginfo attribute for builtin macro is not specified explicitly, it will be effectively set to `#[collapse_debuginfo(yes)]`.
Rollup of 10 pull requests
Successful merges:
- #118665 (Consolidate all associated items on the NonZero integer types into a single impl block per type)
- #118798 (Use AtomicU8 instead of AtomicUsize in backtrace.rs)
- #119062 (Deny braced macro invocations in let-else)
- #119138 (Docs: Use non-SeqCst in module example of atomics)
- #119907 (Update `fn()` trait implementation docs)
- #120083 (Warn when not having a profiler runtime means that coverage tests won't be run/blessed)
- #120107 (dead_code treats #[repr(transparent)] the same as #[repr(C)])
- #120110 (Update documentation for Vec::into_boxed_slice to be more clear about excess capacity)
- #120113 (Remove myself from review rotation)
- #120118 (Fix typo in documentation in base.rs)
r? `@ghost`
`@rustbot` modify labels: rollup
`is_force_warn` is only possible for diagnostics with `Level::Warning`,
but it is currently stored in `Diagnostic::code`, which every diagnostic
has.
This commit:
- removes the boolean `DiagnosticId::Lint::is_force_warn` field;
- adds a `ForceWarning` variant to `Level`.
Benefits:
- The common `Level::Warning` case now has no arguments, replacing
lots of `Warning(None)` occurrences.
- `rustc_session::lint::Level` and `rustc_errors::Level` are more
similar, both having `ForceWarning` and `Warning`.
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
- `struct_foo` + `emit` -> `foo`
- `create_foo` + `emit` -> `emit_foo`
I have made recent commits in other PRs that have removed some of these
shortcuts for combinations with few uses, e.g.
`struct_span_err_with_code`. But for the remaining combinations that
have high levels of use, we might as well use them wherever possible.
Remove crossbeam-channel
The standard library's std::sync::mpsc basically is a crossbeam channel, and for the use case here will definitely suffice. This drops this dependency from librustc_driver.
Consuming `emit`
This PR makes `DiagnosticBuilder::emit` consuming, i.e. take `self` instead of `&mut self`. This is good because it doesn't make sense to emit a diagnostic twice.
This requires some changes to `DiagnosticBuilder` method changing -- every existing non-consuming chaining method gets a new consuming partner with a `_mv` suffix -- but permits a host of beneficial follow-up changes: more concise code through more chaining, removal of redundant diagnostic construction API methods, and removal of machinery to track the possibility of a diagnostic being emitted multiple times.
r? `@compiler-errors`
This works for most of its call sites. This is nice, because `emit` very
much makes sense as a consuming operation -- indeed,
`DiagnosticBuilderState` exists to ensure no diagnostic is emitted
twice, but it uses runtime checks.
For the small number of call sites where a consuming emit doesn't work,
the commit adds `DiagnosticBuilder::emit_without_consuming`. (This will
be removed in subsequent commits.)
Likewise, `emit_unless` becomes consuming. And `delay_as_bug` becomes
consuming, while `delay_as_bug_without_consuming` is added (which will
also be removed in subsequent commits.)
All this requires significant changes to `DiagnosticBuilder`'s chaining
methods. Currently `DiagnosticBuilder` method chaining uses a
non-consuming `&mut self -> &mut Self` style, which allows chaining to
be used when the chain ends in `emit()`, like so:
```
struct_err(msg).span(span).emit();
```
But it doesn't work when producing a `DiagnosticBuilder` value,
requiring this:
```
let mut err = self.struct_err(msg);
err.span(span);
err
```
This style of chaining won't work with consuming `emit` though. For
that, we need to use to a `self -> Self` style. That also would allow
`DiagnosticBuilder` production to be chained, e.g.:
```
self.struct_err(msg).span(span)
```
However, removing the `&mut self -> &mut Self` style would require that
individual modifications of a `DiagnosticBuilder` go from this:
```
err.span(span);
```
to this:
```
err = err.span(span);
```
There are *many* such places. I have a high tolerance for tedious
refactorings, but even I gave up after a long time trying to convert
them all.
Instead, this commit has it both ways: the existing `&mut self -> Self`
chaining methods are kept, and new `self -> Self` chaining methods are
added, all of which have a `_mv` suffix (short for "move"). Changes to
the existing `forward!` macro lets this happen with very little
additional boilerplate code. I chose to add the suffix to the new
chaining methods rather than the existing ones, because the number of
changes required is much smaller that way.
This doubled chainging is a bit clumsy, but I think it is worthwhile
because it allows a *lot* of good things to subsequently happen. In this
commit, there are many `mut` qualifiers removed in places where
diagnostics are emitted without being modified. In subsequent commits:
- chaining can be used more, making the code more concise;
- more use of chaining also permits the removal of redundant diagnostic
APIs like `struct_err_with_code`, which can be replaced easily with
`struct_err` + `code_mv`;
- `emit_without_diagnostic` can be removed, which simplifies a lot of
machinery, removing the need for `DiagnosticBuilderState`.
The standard library's std::sync::mpsc basically is a crossbeam channel,
and for the use case here will definitely suffice. This drops this
dependency from librustc_driver.
Because it's redundant w.r.t. `Diagnostic::is_lint`, which is present
for every diagnostic level.
`struct_lint_level_impl` was the only place that set the `Error` field
to `true`, and it's also the only place that calls
`Diagnostic::is_lint()` to set the `is_lint` field.
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
Clairify `ast::PatKind::Struct` presese of `..` by using an enum instead of a bool
The bool is mainly used for when a `..` is present, but it is also set on recovery to avoid errors. The doc comment not describes both of these cases.
See cee794ee98/compiler/rustc_parse/src/parser/pat.rs (L890-L897) for the only place this is constructed.
r? ``@compiler-errors``
Lots of vectors of messages called `message` or `msg`. This commit
pluralizes them.
Note that `emit_message_default` and `emit_messages_default` both
already existed, and both process a vector, so I renamed the former
`emit_messages_default_inner` because it's called by the latter.
`IntoDiagnostic` defaults to `ErrorGuaranteed`, because errors are the
most common diagnostic level. It makes sense to do likewise for the
closely-related (and much more widely used) `DiagnosticBuilder` type,
letting us write `DiagnosticBuilder<'a, ErrorGuaranteed>` as just
`DiagnosticBuilder<'a>`. This cuts over 200 lines of code due to many
multi-line things becoming single line things.
Refactor AST trait bound modifiers
Instead of having two types to represent trait bound modifiers in the parser / the AST (`parser::ty::BoundModifiers` & `ast::TraitBoundModifier`), only to map one to the other later, just use `parser::ty::BoundModifiers` (moved & renamed to `ast::TraitBoundModifiers`).
The struct type is more extensible and easier to deal with (see [here](https://github.com/rust-lang/rust/pull/119099/files#r1430749981) and [here](https://github.com/rust-lang/rust/pull/119099/files#r1430752116) for context) since it more closely models what it represents: A compound of two kinds of modifiers, constness and polarity. Modeling this as an enum (the now removed `ast::TraitBoundModifier`) meant one had to add a new variant per *combination* of modifier kind, which simply isn't scalable and which lead to a lot of explicit non-DRY matches.
NB: `hir::TraitBoundModifier` being an enum is fine since HIR doesn't need to worry representing invalid modifier kind combinations as those get rejected during AST validation thereby immensely cutting down the number of possibilities.
This commit replaces this pattern:
```
err.into_diagnostic(dcx)
```
with this pattern:
```
dcx.create_err(err)
```
in a lot of places.
It's a little shorter, makes the error level explicit, avoids some
`IntoDiagnostic` imports, and is a necessary prerequisite for the next
commit which will add a `level` arg to `into_diagnostic`.
This requires adding `track_caller` on `create_err` to avoid mucking up
the output of `tests/ui/track-diagnostics/track4.rs`. It probably should
have been there already.
fix: Overlapping spans in delimited meta-vars
Closes#118786
Delimited meta-vars inside of MBE's spans were set to have the same opening and closing position resulting in an ICE when debug assertions were enabled and an error was present in the templated code.
This ensures that the spans do not overlap, whilst still having the spans point at the usage of the meta-var inside the macro definition.
It includes a regression test.
🖤
Currently, `emit_diagnostic` takes `&mut self`.
This commit changes it so `emit_diagnostic` takes `self` and the new
`emit_diagnostic_without_consuming` function takes `&mut self`.
I find the distinction useful. The former case is much more common, and
avoids a bunch of `mut` and `&mut` occurrences. We can also restrict the
latter with `pub(crate)` which is nice.
[`RFC 3086`] Attempt to try to resolve blocking concerns
Implements what is described at https://github.com/rust-lang/rust/issues/83527#issuecomment-1744822345 to hopefully make some progress.
It is unknown if such approach is or isn't desired due to the lack of further feedback, as such, it is probably best to nominate this PR to the official entities.
`@rustbot` labels +I-compiler-nominated
Remove edition umbrella features.
In the 2018 edition, there was an "umbrella" feature `#[feature(rust_2018_preview)]` which was used to enable several other features at once. This umbrella mechanism was not used in the 2021 edition and likely will not be used in 2024 either. During 2018 users reported that setting the feature was awkward, especially since they already needed to opt-in via the edition mechanism.
This PR removes this mechanism because I believe it will not be used (and will clean up and simplify the code). I believe that there are better ways to handle features and editions. In short:
- For highly experimental features, that may or may not be involved in an edition, they can implement regular feature gates like `tcx.features().my_feature`.
- For experimental features that *might* be involved in an edition, they should implement gates with `tcx.features().my_feature && span.at_least_rust_20xx()`. This requires the user to still specify `#![feature(my_feature)]`, to avoid disrupting testing of other edition features which are ready and have been accepted within the edition.
- For experimental features that have graduated to definitely be part of an edition, they should implement gates with `tcx.features().my_feature || span.at_least_rust_20xx()`, or just remove the feature check altogether and just check `span.at_least_rust_20xx()`.
- For relatively simple changes, they can skip the whole feature gating thing and just check `span.at_least_rust_20xx()`, and rely on the instability of the edition itself (which requires `-Zunstable-options`) to gate it.
I am working on documenting all of this in the rustc-dev-guide.
This is an extension of the previous commit. It means the output of
something like this:
```
stringify!(let a: Vec<u32> = vec![];)
```
goes from this:
```
let a: Vec<u32> = vec![] ;
```
With this PR, it now produces this string:
```
let a: Vec<u32> = vec![];
```
`tokenstream::Spacing` appears on all `TokenTree::Token` instances,
both punct and non-punct. Its current usage:
- `Joint` means "can join with the next token *and* that token is a
punct".
- `Alone` means "cannot join with the next token *or* can join with the
next token but that token is not a punct".
The fact that `Alone` is used for two different cases is awkward.
This commit augments `tokenstream::Spacing` with a new variant
`JointHidden`, resulting in:
- `Joint` means "can join with the next token *and* that token is a
punct".
- `JointHidden` means "can join with the next token *and* that token is a
not a punct".
- `Alone` means "cannot join with the next token".
This *drastically* improves the output of `print_tts`. For example,
this:
```
stringify!(let a: Vec<u32> = vec![];)
```
currently produces this string:
```
let a : Vec < u32 > = vec! [] ;
```
With this PR, it now produces this string:
```
let a: Vec<u32> = vec![] ;
```
(The space after the `]` is because `TokenTree::Delimited` currently
doesn't have spacing information. The subsequent commit fixes this.)
The new `print_tts` doesn't replicate original code perfectly. E.g.
multiple space characters will be condensed into a single space
character. But it's much improved.
`print_tts` still produces the old, uglier output for code produced by
proc macros. Because we have to translate the generated code from
`proc_macro::Spacing` to the more expressive `token::Spacing`, which
results in too much `proc_macro::Along` usage and no
`proc_macro::JointHidden` usage. So `space_between` still exists and
is used by `print_tts` in conjunction with the `Spacing` field.
This change will also help with the removal of `Token::Interpolated`.
Currently interpolated tokens are pretty-printed nicely via AST pretty
printing. `Token::Interpolated` removal will mean they get printed with
`print_tts`. Without this change, that would result in much uglier
output for code produced by decl macro expansions. With this change, AST
pretty printing and `print_tts` produce similar results.
The commit also tweaks the comments on `proc_macro::Spacing`. In
particular, it refers to "compound tokens" rather than "multi-char
operators" because lifetimes aren't operators.
detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and
removing redundant imports code into two PR.
Introduce support for `async gen` blocks
I'm delighted to demonstrate that `async gen` block are not very difficult to support. They're simply coroutines that yield `Poll<Option<T>>` and return `()`.
**This PR is WIP and in draft mode for now** -- I'm mostly putting it up to show folks that it's possible. This PR needs a lang-team experiment associated with it or possible an RFC, since I don't think it falls under the jurisdiction of the `gen` RFC that was recently authored by oli (https://github.com/rust-lang/rfcs/pull/3513, https://github.com/rust-lang/rust/issues/117078).
### Technical note on the pre-generator-transform yield type:
The reason that the underlying coroutines yield `Poll<Option<T>>` and not `Poll<T>` (which would make more sense, IMO, for the pre-transformed coroutine), is because the `TransformVisitor` that is used to turn coroutines into built-in state machine functions would have to destructure and reconstruct the latter into the former, which requires at least inserting a new basic block (for a `switchInt` terminator, to match on the `Poll` discriminant).
This does mean that the desugaring (at the `rustc_ast_lowering` level) of `async gen` blocks is a bit more involved. However, since we already need to intercept both `.await` and `yield` operators, I don't consider it much of a technical burden.
r? `@ghost`
never_patterns: Parse match arms with no body
Never patterns are meant to signal unreachable cases, and thus don't take bodies:
```rust
let ptr: *const Option<!> = ...;
match *ptr {
None => { foo(); }
Some(!),
}
```
This PR makes rustc accept the above, and enforces that an arm has a body xor is a never pattern. This affects parsing of match arms even with the feature off, so this is delicate. (Plus this is my first non-trivial change to the parser).
~~The last commit is optional; it introduces a bit of churn to allow the new suggestions to be machine-applicable. There may be a better solution? I'm not sure.~~ EDIT: I removed that commit
r? `@compiler-errors`
Because a macro invocation can expand to a never pattern, we can't rule
out a `arm!(),` arm at parse time. Instead we detect that case at
expansion time, if the macro tries to output a pattern followed by `=>`.
Currently we always do this:
```
use rustc_fluent_macro::fluent_messages;
...
fluent_messages! { "./example.ftl" }
```
But there is no need, we can just do this everywhere:
```
rustc_fluent_macro::fluent_messages! { "./example.ftl" }
```
which is shorter.
The `fluent_messages!` macro produces uses of
`crate::{D,Subd}iagnosticMessage`, which means that every crate using
the macro must have this import:
```
use rustc_errors::{DiagnosticMessage, SubdiagnosticMessage};
```
This commit changes the macro to instead use
`rustc_errors::{D,Subd}iagnosticMessage`, which avoids the need for the
imports.
Replace `option.map(cond) == Some(true)` with `option.is_some_and(cond)`
Requested by `@fmease` in https://github.com/rust-lang/rust/pull/118226#pullrequestreview-1747432292.
There is also a much larger number of `option.map_or(false, cond)` that can be changed separately if someone wants.
r? fmease
Most notably, this commit changes the `pub use crate::*;` in that file
to `use crate::*;`. This requires a lot of `use` items in other crates
to be adjusted, because everything defined within `rustc_span::*` was
also available via `rustc_span::source_map::*`, which is bizarre.
The commit also removes `SourceMap::span_to_relative_line_string`, which
is unused.
- Sort dependencies and features sections.
- Add `tidy` markers to the sorted sections so they stay sorted.
- Remove empty `[lib`] sections.
- Remove "See more keys..." comments.
Excluded files:
- rustc_codegen_{cranelift,gcc}, because they're external.
- rustc_lexer, because it has external use.
- stable_mir, because it has external use.
Stop telling people to submit bugs for internal feature ICEs
This keeps track of usage of internal features, and changes the message to instead tell them that using internal features is not supported.
I thought about several ways to do this but now used the explicit threading of an `Arc<AtomicBool>` through `Session`. This is not exactly incremental-safe, but this is fine, as this is set during macro expansion, which is pre-incremental, and also only affects the output of ICEs, at which point incremental correctness doesn't matter much anyways.
See [MCP 620.](https://github.com/rust-lang/compiler-team/issues/596)
This keeps track of usage of internal features, and changes the message
to instead tell them that using internal features is not supported.
See MCP 620.
It's a better name, and lets "active features" refer to the features
that are active in a particular program, due to being declared or
enabled by the edition.
The commit also renames `Features::enabled` as `Features::active` to
match this; I changed my mind and have decided that "active" is a little
better thatn "enabled" for this, particularly because a number of
pre-existing comments use "active" in this way.
Finally, the commit renames `Status::Stable` as `Status::Accepted`, to
match `ACCEPTED_FEATURES`.
`State` is used to distinguish active vs accepted vs removed features.
However, these can also be distinguished by their location, in
`ACTIVE_FEATURES`, `ACCEPTED_FEATURES`, and `REMOVED_FEATURES`.
So this commit removes `State` and moves the internals of its variants
next to the `Feature` in each element of `*_FEATURES`, introducing new
types `ActiveFeature` and `RemovedFeature`. (There is no need for
`AcceptedFeature` because `State::Accepted` had no fields.)
This is a tighter type representation, avoids the need for some runtime
checks, and makes the code a bit shorter.
Currently `rust_20XX_preview` features aren't recorded as declared even
when they are explicit declared. Similarly, redundant edition-dependent
features (e.g. `test_2018_feature`) aren't recorded as declared.
This commit marks them as recorded. There is no detectable functional
change, but it makes things more consistent.
The word "active" is currently used in two different and confusing ways:
- `ACTIVE_FEATURES` actually means "available unstable features"
- `Features::active_features` actually means "features declared in the
crate's code", which can include feature within `ACTIVE_FEATURES` but
also others.
(This is also distinct from "enabled" features which includes declared
features but also some edition-specific features automatically enabled
depending on the edition in use.)
This commit changes the `Features::active_features` to
`Features::declared_features` which actually matches its meaning.
Likewise, `Features::active` becomes `Features::declared`.
The new way of doing things:
- Avoids some code duplication.
- Distinguishes the `crate_edition` (which comes from `--edition`) and
the `features_edition` (which combines `--edition` along with any
`rustc_20XX_preview` features), which is useful.
- Has a simpler initial loop, one that just looks for
`rustc_20XX_preview` features in order to compute `features_edition`.
- Creates a fallible alternative to `Features::enabled`, which is
useful.
It's not easy to see how exactly the old and new code are equivalent,
but it's reassuring to know that the test coverage is quite good for
this stuff.
There is a single features (`no_stack_check`) in
`STABLE_REMOVED_FEATURES`. But the treatment of
`STABLE_REMOVED_FEATURES` and `REMOVED_FEATURES` is actually identical.
So this commit just merges them, and uses a comment to record
`no_stack_check`'s unique "stable removed" status.
This also lets `State::Stabilized` (which was a terrible name) be
removed.
`Nonterminal`-related cleanups
In #114647 I am trying to remove `Nonterminal`. It has a number of preliminary cleanups that are worth merging even if #114647 doesn't merge, so let's do them in this PR.
r? `@petrochenkov`
Lots of tiny incremental simplifications of `EmitterWriter` internals
ignore the first commit, it's https://github.com/rust-lang/rust/pull/114088 squashed and rebased, but it's needed to use to use `derive_setters`, as they need a newer `syn` version.
Then this PR starts out with removing many arguments that are almost always defaulted to `None` or `false` and replace them with builder methods that can set these fields in the few cases that want to set them.
After that it's one commit after the other that removes or merges things until everything becomes some very simple trait objects
It lints against features that are inteded to be internal to the
compiler and standard library. Implements MCP #596.
We allow `internal_features` in the standard library and compiler as those
use many features and this _is_ the standard library from the "internal to the compiler and
standard library" after all.
Marking some features as internal wasn't exactly the most scientific approach, I just marked some
mostly obvious features. While there is a categorization in the macro,
it's not very well upheld (should probably be fixed in another PR).
We always pass `-Ainternal_features` in the testsuite
About 400 UI tests and several other tests use internal features.
Instead of throwing the attribute on each one, just always allow them.
There's nothing wrong with testing internal features^^
It's the same as `Delimiter`, minus the `Invisible` variant. I'm
generally in favour of using types to make impossible states
unrepresentable, but this one feels very low-value, and the conversions
between the two types are annoying and confusing.
Look at the change in `src/tools/rustfmt/src/expr.rs` for an example:
the old code converted from `MacDelimiter` to `Delimiter` and back
again, for no good reason. This suggests the author was confused about
the types.
Move doc comment desugaring out of `TokenCursor`.
It's awkward that `TokenCursor` sometimes desugars doc comments on the fly, but usually doesn't.
r? `@petrochenkov`
Less `TokenTree` cloning
`TokenTreeCursor` has this comment on it:
```
// FIXME: Many uses of this can be replaced with by-reference iterator to avoid clones.
```
This PR completes that FIXME. It doesn't have much perf effect, but at least we now know that.
r? `@petrochenkov`
This is surprising, but the new comment explains why. It's a logical
conclusion in the drive to avoid `TokenTree` clones.
`TokenTreeCursor` is now only used within `Parser`. It's still needed
due to `replace_prev_and_rewind`.
On nightly, dump ICE backtraces to disk
Implement rust-lang/compiler-team#578.
When an ICE is encountered on nightly releases, the new rustc panic handler will also write the contents of the backtrace to disk. If any `delay_span_bug`s are encountered, their backtrace is also added to the file. The platform and rustc version will also be collected.
<img width="1032" alt="Screenshot 2023-03-03 at 2 13 25 PM" src="https://user-images.githubusercontent.com/1606434/222842420-8e039740-4042-4563-b31d-599677171acf.png">
The current behavior will *always* write to disk on nightly builds, regardless of whether the backtrace is printed to the terminal, unless the environment variable `RUSTC_ICE_DISK_DUMP` is set to `0`. This is a compromise and can be changed.
Implement rust-lang/compiler-team#578.
When an ICE is encountered on nightly releases, the new rustc panic
handler will also write the contents of the backtrace to disk. If any
`delay_span_bug`s are encountered, their backtrace is also added to the
file. The platform and rustc version will also be collected.
Previously it removed all other attributes from the crate root.
Now it removes only attributes below itself.
So it becomes possible to configure some global crate properties even for fully unconfigured crates.
Remember names of `cfg`-ed out items to mention them in diagnostics
# Examples
## `serde::Deserialize` without the `derive` feature (a classic beginner mistake)
I had to slightly modify serde so that it uses explicit re-exports instead of a glob re-export. (Update: a serde PR was merged that adds the manual re-exports)
```
error[E0433]: failed to resolve: could not find `Serialize` in `serde`
--> src/main.rs:1:17
|
1 | #[derive(serde::Serialize)]
| ^^^^^^^^^ could not find `Serialize` in `serde`
|
note: crate `serde` has an item named `Serialize` but it is inactive because its cfg predicate evaluated to false
--> /home/gh-Nilstrieb/.cargo/registry/src/index.crates.io-6f17d22bba15001f/serde-1.0.160/src/lib.rs:343:1
|
343 | #[cfg(feature = "serde_derive")]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
344 | pub use serde_derive::{Deserialize, Serialize};
| ^^^^^^^^^
= note: the item is gated behind the `serde_derive` feature
= note: see https://doc.rust-lang.org/cargo/reference/features.html for how to activate a crate's feature
```
(the suggestion is not ideal but that's serde's fault)
I already tested the metadata size impact locally by compiling the `windows` crate without any features. `800k` -> `809k`
r? `@ghost`
`#[cfg]`s are frequently used to gate crate content behind cargo
features. This can lead to very confusing errors when features are
missing. For example, `serde` doesn't have the `derive` feature by
default. Therefore, `serde::Serialize` fails to resolve with a generic
error, even though the macro is present in the docs.
This commit adds a list of all stripped item names to metadata. This is
filled during macro expansion and then, through a fed query, persisted
in metadata. The downstream resolver can then access the metadata to
look at possible candidates for mentioning in the errors.
This slightly increases metadata (800k->809k for the feature-heavy
windows crate), but not enough to really matter.
Each of `{D,Subd}iagnosticMessage::{Str,Eager}` has a comment:
```
// FIXME(davidtwco): can a `Cow<'static, str>` be used here?
```
This commit answers that question in the affirmative. It's not the most
compelling change ever, but it might be worth merging.
This requires changing the `impl<'a> From<&'a str>` impls to `impl
From<&'static str>`, which involves a bunch of knock-on changes that
require/result in call sites being a little more precise about exactly
what kind of string they use to create errors, and not just `&str`. This
will result in fewer unnecessary allocations, though this will not have
any notable perf effects given that these are error paths.
Note that I was lazy within Clippy, using `to_string` in a few places to
preserve the existing string imprecision. I could have used `impl
Into<{D,Subd}iagnosticMessage>` in various places as is done in the
compiler, but that would have required changes to *many* call sites
(mostly changing `&format("...")` to `format!("...")`) which didn't seem
worthwhile.
Error message all end up passing into a function as an `impl
Into<{D,Subd}iagnosticMessage>`. If an error message is creatd as
`&format("...")` that means we allocate a string (in the `format!`
call), then take a reference, and then clone (allocating again) the
reference to produce the `{D,Subd}iagnosticMessage`, which is silly.
This commit removes the leading `&` from a lot of these cases. This
means the original `String` is moved into the
`{D,Subd}iagnosticMessage`, avoiding the double allocations. This
requires changing some function argument types from `&str` to `String`
(when all arguments are `String`) or `impl
Into<{D,Subd}iagnosticMessage>` (when some arguments are `String` and
some are `&str`).
try to downgrade Arc -> Lrc -> Rc -> no-Rc in few places
Expecting this be not slower on non-parallel compiler and probably faster on parallel (checked that this PR builds on it).
Currently a `{D,Subd}iagnosticMessage` can be created from any type that
impls `Into<String>`. That includes `&str`, `String`, and `Cow<'static,
str>`, which are reasonable. It also includes `&String`, which is pretty
weird, and results in many places making unnecessary allocations for
patterns like this:
```
self.fatal(&format!(...))
```
This creates a string with `format!`, takes a reference, passes the
reference to `fatal`, which does an `into()`, which clones the
reference, doing a second allocation. Two allocations for a single
string, bleh.
This commit changes the `From` impls so that you can only create a
`{D,Subd}iagnosticMessage` from `&str`, `String`, or `Cow<'static,
str>`. This requires changing all the places that currently create one
from a `&String`. Most of these are of the `&format!(...)` form
described above; each one removes an unnecessary static `&`, plus an
allocation when executed. There are also a few places where the existing
use of `&String` was more reasonable; these now just use `clone()` at
the call site.
As well as making the code nicer and more efficient, this is a step
towards possibly using `Cow<'static, str>` in
`{D,Subd}iagnosticMessage::{Str,Eager}`. That would require changing
the `From<&'a str>` impls to `From<&'static str>`, which is doable, but
I'm not yet sure if it's worthwhile.
My type ascription
Oh rip it out
Ah
If you think we live too much then
You can sacrifice diagnostics
Don't mix your garbage
Into my syntax
So many weird hacks keep diagnostics alive
Yet I don't even step outside
So many bad diagnostics keep tyasc alive
Yet tyasc doesn't even bother to survive!
Added byte position range for `proc_macro::Span`
Currently, the [`Debug`](https://doc.rust-lang.org/beta/proc_macro/struct.Span.html#impl-Debug-for-Span) implementation for [`proc_macro::Span`](https://doc.rust-lang.org/beta/proc_macro/struct.Span.html#) calls the debug function implemented in the trait implementation of `server::Span` for the type `Rustc` in the `rustc-expand` crate.
The current implementation, of the referenced function, looks something like this:
```rust
fn debug(&mut self, span: Self::Span) -> String {
if self.ecx.ecfg.span_debug {
format!("{:?}", span)
} else {
format!("{:?} bytes({}..{})", span.ctxt(), span.lo().0, span.hi().0)
}
}
```
It returns the byte position of the [`Span`](https://doc.rust-lang.org/beta/proc_macro/struct.Span.html#) as an interpolated string.
Because this is currently the only way to get a spans position in the file, I might lead someone, who is interested in this information, to parsing this interpolated string back into a range of bytes, which I think is a very non-rusty way.
The proposed `position()`, method implemented in this PR, gives the ability to directly get this info.
It returns a [`std::ops::Range`](https://doc.rust-lang.org/std/ops/struct.Range.html#) wrapping the lowest and highest byte of the [`Span`](https://doc.rust-lang.org/beta/proc_macro/struct.Span.html#).
I put it behind the `proc_macro_span` feature flag because many of the other functions that have a similar footprint also are annotated with it, I don't actually know if this is right.
It would be great if somebody could take a look at this, thank you very much in advanced.
Add `rustc_fluent_macro` to decouple fluent from `rustc_macros`
Fluent, with all the icu4x it brings in, takes quite some time to compile. `fluent_messages!` is only needed in further downstream rustc crates, but is blocking more upstream crates like `rustc_index`. By splitting it out, we allow `rustc_macros` to be compiled earlier, which speeds up `x check compiler` by about 5 seconds (and even more after the needless dependency on `serde_json` is removed from `rustc_data_structures`).
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
Improve the error message when forwarding a matched fragment to another macro
Adds a link to [Forwarding a matched fragment](https://doc.rust-lang.org/nightly/reference/macros-by-example.html#forwarding-a-matched-fragment) section of the Rust Reference, and suggests a possible fix (using `:tt` instead in the macro definition).
Also removes typos from the original message, it should be `:lifetime` instead of `$lifetime`.
## Motivation
When trying to write a macro which uses a literal in the matcher from the outer macro, like the following one, using a fragment specified that isn't one of `:ident`, `:lifetime`, or `:tt` currently results in a hard to understand message.
```rs
macro_rules! make_t_for_all_tokens {
($($name:literal as $variant:expr,)*) => {
macro_rules! t {
$(
($name) => {
$variant
};
)*
}
};
}
make_t_for_all_tokens! {
"fn" as Token::Fn,
"return" as Token::Return,
"let" as Token::Let,
}
// This creates
//
// macro_rules! t {
// ("fn") => {
// Token::Fn
// };
// ("return") => {
// Token::Return
// };
// ("let") => {
// Token::Let
// };
// }
t!["fn"];
```
### Before
```
error: no rules expected the token `"fn"`
--> src/main.rs:103:10
|
32 | macro_rules! t {
| -------------- when calling this macro
...
103 | t!["fn"];
| ^^^^ no rules expected this token in macro call
|
note: while trying to match `"fn"`
--> src/main.rs:34:6
|
34 | ($name) => {
| ^^^^^
...
58 | / make_t_for_all_tokens! {
59 | | "fn" as Token::Fn,
60 | | "return" as Token::Return,
61 | | "let" as Token::Let,
62 | | }
| |_- in this macro invocation
= note: captured metavariables except for `$tt`, `$ident` and `$lifetime` cannot be compared to other tokens
= note: this error originates in the macro `make_t_for_all_tokens` (in Nightly builds, run with -Z macro-backtrace for more info)
```
### After
```
error: no rules expected the token `"fn"`
--> src/main.rs:103:10
|
32 | macro_rules! t {
| -------------- when calling this macro
...
103 | t!["fn"];
| ^^^^ no rules expected this token in macro call
|
note: while trying to match `"fn"`
--> src/main.rs:34:6
|
34 | ($name) => {
| ^^^^^
...
58 | / make_t_for_all_tokens! {
59 | | "fn" as Token::Fn,
60 | | "return" as Token::Return,
61 | | "let" as Token::Let,
62 | | }
| |_- in this macro invocation
= note: captured metavariables except for `:tt`, `:ident` and `:lifetime` cannot be compared to other tokens
= note: see https://doc.rust-lang.org/nightly/reference/macros-by-example.html#forwarding-a-matched-fragment for more information
= help: try using `:tt` instead in the macro definition
= note: this error originates in the macro `make_t_for_all_tokens` (in Nightly builds, run with -Z macro-backtrace for more info)
```
## Unresolved questions
- Preferrably the suggestion should be attached to the `$name:literal` part of the outer macro, instead of being in the notes section at the end. But I'm not familiar with how the compiler works at all, and I have no idea how to approach this kind of solution.
- `@Nilstrieb` raised a question that the suggestion of adding `:tt` isn't accurate when there's more than `tt` being matched, for example when the input is an `item`.
Adds a link to the relevant part of The Rust Reference in the eror
message, and suggests a possible fix (replacing the fragment specifier
with :tt in the macro definition).
Fixes typos in the original message.
Signed-off-by: Lena Milizé <me@lvmn.org>
It partially expands crate attributes before the main expansion pass (without modifying the crate), and the produced preliminary crate attribute list is used for querying a few attributes that are required very early.
Crate-level cfg attributes are then expanded normally during the main expansion pass, like attributes on any other nodes.
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
Rollup of 9 pull requests
Successful merges:
- #104363 (Make `unused_allocation` lint against `Box::new` too)
- #106633 (Stabilize `nonzero_min_max`)
- #106844 (allow negative numeric literals in `concat!`)
- #108071 (Implement goal caching with the new solver)
- #108542 (Force parentheses around `match` expression in binary expression)
- #108690 (Place size limits on query keys and values)
- #108708 (Prevent overflow through Arc::downgrade)
- #108739 (Prevent the `start_bx` basic block in codegen from having two `Builder`s at the same time)
- #108806 (Querify register_tools and post-expansion early lints)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Querify register_tools and post-expansion early lints
The 2 extra queries correspond to code that happen before and after macro expansion, and don't need the resolver to exist.
After removing the `map_in_place` method, which isn't much use because
modifying every element in a collection such as a `Vec` can be done
trivially with iteration.
Extend `CodegenBackend` trait with a function returning the translation
resources from the codegen backend, which can be added to the complete
list of resources provided to the emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
