This patch adds a few improvements to how the build system finds
LLVM's FileCheck program.
* On Fedora, the system LLVM installs FileCheck in the "llvm"
subdirectory of the LLVM libdir. This patch teaches the build
system to look there.
* This adds a configure option to specify which llvm-config executable
to use. This is handy on systems that can parallel install multiple
versions of LLVM; for example I can now:
./configure --llvm-config=/bin/llvm-config-5.0-64
... to build against LLVM 5, rather than whatever the default
llvm-config might be.
* Finally, this adds a configure- and config.toml- option to set the
path to FileCheck. This is handy when building against an LLVM
where FileCheck was not installed. This happens on compatibility
installs of LLVM on Fedora.
Add rustc SHA to released DWARF debuginfo
This commit updates the debuginfo that is encoded in all of our released
artifacts by default. Currently it has paths like `/checkout/src/...` but these
are a little inconsistent and have changed over time. This commit instead
attempts to actually define the file paths in our debuginfo to be consistent
between releases.
All debuginfo paths are now intended to be `/rustc/$sha` where `$sha` is the git
sha of the released compiler. Sub-paths are all paths into the git repo at that
`$sha`.
This commit updates the debuginfo that is encoded in all of our released
artifacts by default. Currently it has paths like `/checkout/src/...` but these
are a little inconsistent and have changed over time. This commit instead
attempts to actually define the file paths in our debuginfo to be consistent
between releases.
All debuginfo paths are now intended to be `/rustc/$sha` where `$sha` is the git
sha of the released compiler. Sub-paths are all paths into the git repo at that
`$sha`.
This optionally adds lldb (and clang, which it needs) to the build.
Because rust uses LLVM 7, and because clang 7 is not yet released, a
recent git master version of clang is used.
The lldb that is used includes the Rust plugin.
lldb is only built when asked for, or when doing a nightly build on
macOS. Only macOS is done for now due to difficulties with the Python
dependency.
Disable LLVM verification by default
Currently -Z no-verify only controls IR verification prior to LLVM codegen, while verification is performed unconditionally both before and after linking with (Thin)LTO.
Also wondering what the sentiment is on disabling verification by default (and e.g. only enabling it on ALT builds with assertions). This does not seem terribly useful outside of rustc development and it does seem to show up in profiles (at something like 3%).
**EDIT:** A table showing the various configurations and what is enabled when.
| Configuration | Dynamic verification performed | LLVM static assertions compiled in |
| --- | --- | --- |
| alt builds | | yes |
| nightly builds | | no |
| stable builds | | no |
| CI builds | | |
| dev builds in a checkout | | |
ship LLVM tools with the toolchain
this PR adds llvm-{nm,objcopy,objdump,size} to the rustc sysroot (right next to LLD)
this slightly increases the size of the rustc component. I measured these numbers on x86_64 Linux:
- rustc-1.27.0-dev-x86_64-unknown-linux-gnu.tar.gz 180M -> 193M (+7%)
- rustc-1.27.0-dev-x86_64-unknown-linux-gnu.tar.xz 129M -> 137M (+6%)
r? @alexcrichton
cc #49584
Currently on CI we predominately compile LLVM with the default system compiler
which means gcc on Linux, some version of Clang on OSX, MSVC on Windows, and
gcc on MinGW. This commit switches Linux, OSX, and Windows to all use Clang
6.0.0 to build LLVM (aka the C/C++ compiler as part of the bootstrap). This
looks to generate faster code according to #49879 which translates to a faster
rustc (as LLVM internally is faster)
The major changes here were to the containers that build Linux releases,
basically adding a new step that uses the previous gcc 4.8 compiler to compile
the next Clang 6.0.0 compiler. Otherwise the OSX and Windows scripts have been
updated to download precompiled versions of Clang 6 and configure the build to
use them.
Note that `cc` was updated here to fix using `clang-cl` with `cc-rs` on MSVC, as
well as an update to `sccache` on Windows which was needed to correctly work
with `clang-cl`. Finally the MinGW compiler is entirely left out here
intentionally as it's currently thought that Clang can't generate C++ code for
MinGW and we need to use gcc, but this should be verified eventually.
Debugging information for the extended tools is currently disabled for
concerns about the size. This patch adds `--enable-debuginfo-tools` to
let one opt into having that debuginfo.
This is useful for debugging the tools in distro packages. We always
strip debuginfo into separate packages anyway, so the extra size is not
a concern in regular use.
ci: Print out how long each step takes on CI
This commit updates CI configuration to inform rustbuild that it should print
out how long each step takes on CI. This'll hopefully allow us to track the
duration of steps over time and follow regressions a bit more closesly (as well
as have closer analysis of differences between two builds).
cc #48829
This commit updates CI configuration to inform rustbuild that it should print
out how long each step takes on CI. This'll hopefully allow us to track the
duration of steps over time and follow regressions a bit more closesly (as well
as have closer analysis of differences between two builds).
cc #48829
config.toml.example: thinlto bootstrap was removed
It was removed in ff227c4a2d so remove the option that no longer works (we did not notice because it was commented out by default).
This commit imports the LLD project from LLVM to serve as the default linker for
the `wasm32-unknown-unknown` target. The `binaryen` submoule is consequently
removed along with "binaryen linker" support in rustc.
Moving to LLD brings with it a number of benefits for wasm code:
* LLD is itself an actual linker, so there's no need to compile all wasm code
with LTO any more. As a result builds should be *much* speedier as LTO is no
longer forcibly enabled for all builds of the wasm target.
* LLD is quickly becoming an "official solution" for linking wasm code together.
This, I believe at least, is intended to be the main supported linker for
native code and wasm moving forward. Picking up support early on should help
ensure that we can help LLD identify bugs and otherwise prove that it works
great for all our use cases!
* Improvements to the wasm toolchain are currently primarily focused around LLVM
and LLD (from what I can tell at least), so it's in general much better to be
on this bandwagon for bugfixes and new features.
* Historical "hacks" like `wasm-gc` will soon no longer be necessary, LLD
will [natively implement][gc] `--gc-sections` (better than `wasm-gc`!) which
means a postprocessor is no longer needed to show off Rust's "small wasm
binary size".
LLD is added in a pretty standard way to rustc right now. A new rustbuild target
was defined for building LLD, and this is executed when a compiler's sysroot is
being assembled. LLD is compiled against the LLVM that we've got in tree, which
means we're currently on the `release_60` branch, but this may get upgraded in
the near future!
LLD is placed into rustc's sysroot in a `bin` directory. This is similar to
where `gcc.exe` can be found on Windows. This directory is automatically added
to `PATH` whenever rustc executes the linker, allowing us to define a `WasmLd`
linker which implements the interface that `wasm-ld`, LLD's frontend, expects.
Like Emscripten the LLD target is currently only enabled for Tier 1 platforms,
notably OSX/Windows/Linux, and will need to be installed manually for compiling
to wasm on other platforms. LLD is by default turned off in rustbuild, and
requires a `config.toml` option to be enabled to turn it on.
Finally the unstable `#![wasm_import_memory]` attribute was also removed as LLD
has a native option for controlling this.
[gc]: https://reviews.llvm.org/D42511
Customizable extended tools
This PR adds `build.tools` option to manage installation of extended rust tools.
By default it doesn't change installation. All tools are built and `rls` and `rustfmt` allowed to fail installation.
If some set of tools chosen only those tools are built and installed without any fails allowed.
It solves some slotting issues with extended build enabled: https://bugs.gentoo.org/show_bug.cgi?id=645498
Dist builds should always be as fast as we can make them, and since
those run on CI we don't care quite as much for the build being somewhat
slower. As such, we don't automatically enable ThinLTO on builds for the
dist builders.
This commit introduces a separately compiled backend for Emscripten, avoiding
compiling the `JSBackend` target in the main LLVM codegen backend. This builds
on the foundation provided by #47671 to create a new codegen backend dedicated
solely to Emscripten, removing the `JSBackend` of the main codegen backend in
the process.
A new field was added to each target for this commit which specifies the backend
to use for translation, the default being `llvm` which is the main backend that
we use. The Emscripten targets specify an `emscripten` backend instead of the
main `llvm` one.
There's a whole bunch of consequences of this change, but I'll try to enumerate
them here:
* A *second* LLVM submodule was added in this commit. The main LLVM submodule
will soon start to drift from the Emscripten submodule, but currently they're
both at the same revision.
* Logic was added to rustbuild to *not* build the Emscripten backend by default.
This is gated behind a `--enable-emscripten` flag to the configure script. By
default users should neither check out the emscripten submodule nor compile
it.
* The `init_repo.sh` script was updated to fetch the Emscripten submodule from
GitHub the same way we do the main LLVM submodule (a tarball fetch).
* The Emscripten backend, turned off by default, is still turned on for a number
of targets on CI. We'll only be shipping an Emscripten backend with Tier 1
platforms, though. All cross-compiled platforms will not be receiving an
Emscripten backend yet.
This commit means that when you download the `rustc` package in Rustup for Tier
1 platforms you'll be receiving two trans backends, one for Emscripten and one
that's the general LLVM backend. If you never compile for Emscripten you'll
never use the Emscripten backend, so we may update this one day to only download
the Emscripten backend when you add the Emscripten target. For now though it's
just an extra 10MB gzip'd.
Closes#46819
This commit alters how we compile LLVM by default enabling the WebAssembly
backend. This then also adds the wasm32-unknown-unknown target to get compiled
on the `cross` builder and distributed through rustup. Tests are not yet enabled
for this target but that should hopefully be coming soon!
... specifically `datadir`, `infodir`, and `localstatedir`. These were
already accepted by `configure.py`, but it didn't have any place to put
the values.
While the `config.toml.example` comments say "we automatically check the
version by default," we actually didn't. That check was badly out of
date, only allowing 3.5, 3.6, or 3.7. This it now updated to the new
3.9 minimum requirement, and truly enabled by default.
This commit rewrites our ancient `./configure` script from shell into Python.
The impetus for this change is to remove `config.mk` which is just a vestige of
the old makefile build system at this point. Instead all configuration is now
solely done through `config.toml`.
The python script allows us to more flexibly program (aka we can use loops
easily) and create a `config.toml` which is based off `config.toml.example`.
This way we can preserve comments and munge various values as we see fit.
It is intended that the configure script here is a drop-in replacement for the
previous configure script, no functional change is intended. Also note that the
rationale for this is also because our build system requires Python, so having a
python script a bit earlier shouldn't cause too many problems.
Closes#40730
This controls the value of the crt-static feature used when building the
standard library for a target, as well as the compiler itself when that
target is the host.
Some users of the build system change the git sha on every build due to
utilizing git to push changes to a remote server. This allows them to
simply configure that away instead of depending on custom patches to
rustbuild.
