Because:
- `diagnostic_builder.rs` is small (282 lines),
- `Diagnostic` and `DiagnosticBuilder` are closely related types, and
- there's already an `impl DiagnosticBuilder` block in `diagnostic.rs`.
At the same time, reorder a few of things already in `diagnostic.rs`,
e.g. move `struct Diagnostic` just before `impl Diagnostic`.
This commit only moves code around. There are no functional changes.
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
errors: only eagerly translate subdiagnostics
Subdiagnostics don't need to be lazily translated, they can always be eagerly translated. Eager translation is slightly more complex as we need to have a `DiagCtxt` available to perform the translation, which involves slightly more threading of that context.
This slight increase in complexity should enable later simplifications - like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages into the diagnostic structs rather than having them in separate files (working on that was what led to this change).
r? ```@nnethercote```
Subdiagnostics don't need to be lazily translated, they can always be
eagerly translated. Eager translation is slightly more complex as we need
to have a `DiagCtxt` available to perform the translation, which involves
slightly more threading of that context.
This slight increase in complexity should enable later simplifications -
like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages
into the diagnostic structs rather than having them in separate files
(working on that was what led to this change).
Signed-off-by: David Wood <david@davidtw.co>
It's only has a single remaining purpose: to ensure that a diagnostic is
printed when `trimmed_def_paths` is used. It's an annoying mechanism:
weak, with odd semantics, badly named, and gets in the way of other
changes.
This commit replaces it with a simpler `must_produce_diag` mechanism,
getting rid of a diagnostic `Level` along the way.
Suppress suggestions in derive macro
close#118809
I suppress warnings inside derive macros.
For example, the compiler emits following error by a program described in https://github.com/rust-lang/rust/issues/118809#issuecomment-1852256687 with a suggestion that indicates invalid syntax.
```
error[E0308]: `?` operator has incompatible types
--> src/main.rs:3:17
|
3 | #[derive(Debug, Deserialize)]
| ^^^^^^^^^^^ expected `u32`, found `u64`
|
= note: `?` operator cannot convert from `u64` to `u32`
= note: this error originates in the derive macro `Deserialize` (in Nightly builds, run with -Z macro-backtrace for more info)
help: you can convert a `u64` to a `u32` and panic if the converted value doesn't fit
|
3 | #[derive(Debug, Deserialize.try_into().unwrap())]
| ++++++++++++++++++++
For more information about this error, try `rustc --explain E0308`.
error: could not compile `serde_test` (bin "serde_test") due to 2 previous errors
```
In this PR, suggestions to cast are suppressed.
```
error[E0308]: `?` operator has incompatible types
--> src/main.rs:3:17
|
3 | #[derive(Debug, Deserialize)]
| ^^^^^^^^^^^ expected `u32`, found `u64`
|
= note: `?` operator cannot convert from `u64` to `u32`
= note: this error originates in the derive macro `Deserialize` (in Nightly builds, run with -Z macro-backtrace for more info)
For more information about this error, try `rustc --explain E0308`.
error: could not compile `serde_test` (bin "serde_test") due to 2 previous errors
```
The two kinds of delayed bug have quite different semantics so a
stronger conceptual separation is nice. (`is_error` is a good example,
because the two kinds have different behaviour.)
The commit also moves the `DelayedBug` variant after `Error` in `Level`,
to reflect the fact that it's weaker than `Error` -- it might trigger an
error but also might not. (The pre-existing `downgrade_to_delayed_bug`
function also reflects the notion that delayed bugs are lower/after
normal errors.)
Plus it condenses some of the comments on `Level` into a table, for
easier reading, and introduces `can_be_top_or_sub` to indicate which
levels can be used in top-level diagnostics vs. subdiagnostics.
Finally, it renames `DiagCtxtInner::span_delayed_bugs` as
`DiagCtxtInner::delayed_bugs`. The `span_` prefix is unnecessary because
some delayed bugs don't have a span.
It doesn't affect behaviour, but makes sense with (a) `FailureNote` having
`()` as its emission guarantee, and (b) in `Level` the `is_error` levels
now are all listed before the non-`is_error` levels.
- `emitted_at` isn't used outside the crate.
- `code` and `messages` are public fields, so there's no point have
trivial getters/setters for them.
- `suggestions` is public, so the comment about "functionality on
`Diagnostic`" isn't needed.
When there are two possibilities, both of which use a `String`, it's
nicer to use a struct than an enum. Especially when mapping the contents
into a tuple.
It contains an `i128`, but when creating them we convert any number
outside the range -100..100 to a string, because Fluent uses an `f64`.
It's all a bit strange.
This commit changes the `i128` to an `i32`, which fits safely in
Fluent's `f64`, and removes the -100..100 range check. This means that
only integers outside the range of `i32` will be converted to strings.
`Diagnostic::keys`, which is used for hashing and equating diagnostics,
has a surprising behaviour: it ignores children, but only for lints.
This was added in #88493 to fix some duplicated diagnostics, but it
doesn't seem necessary any more.
This commit removes the special case and only four tests have changed
output, with additional errors. And those additional errors aren't
exact duplicates, they're just similar. For example, in
src/tools/clippy/tests/ui/same_name_method.rs we currently have this
error:
```
error: method's name is the same as an existing method in a trait
--> $DIR/same_name_method.rs:75:13
|
LL | fn foo() {}
| ^^^^^^^^^^^
|
note: existing `foo` defined here
--> $DIR/same_name_method.rs:79:9
|
LL | impl T1 for S {}
| ^^^^^^^^^^^^^^^^
```
and with this change we also get this error:
```
error: method's name is the same as an existing method in a trait
--> $DIR/same_name_method.rs:75:13
|
LL | fn foo() {}
| ^^^^^^^^^^^
|
note: existing `foo` defined here
--> $DIR/same_name_method.rs:81:9
|
LL | impl T2 for S {}
| ^^^^^^^^^^^^^^^^
```
I think printing this second argument is reasonable, possibly even
preferable to hiding it. And the other cases are similar.
Because it's almost always static.
This makes `impl IntoDiagnosticArg for DiagnosticArgValue` trivial,
which is nice.
There are a few diagnostics constructed in
`compiler/rustc_mir_build/src/check_unsafety.rs` and
`compiler/rustc_mir_transform/src/errors.rs` that now need symbols
converted to `String` with `to_string` instead of `&str` with `as_str`,
but that' no big deal, and worth it for the simplifications elsewhere.
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
`Diagnostic::code` has the type `DiagnosticId`, which has `Error` and
`Lint` variants. Plus `Diagnostic::is_lint` is a bool, which should be
redundant w.r.t. `Diagnostic::code`.
Seems simple. Except it's possible for a lint to have an error code, in
which case its `code` field is recorded as `Error`, and `is_lint` is
required to indicate that it's a lint. This is what happens with
`derive(LintDiagnostic)` lints. Which means those lints don't have a
lint name or a `has_future_breakage` field because those are stored in
the `DiagnosticId::Lint`.
It's all a bit messy and confused and seems unintentional.
This commit:
- removes `DiagnosticId`;
- changes `Diagnostic::code` to `Option<String>`, which means both
errors and lints can straightforwardly have an error code;
- changes `Diagnostic::is_lint` to `Option<IsLint>`, where `IsLint` is a
new type containing a lint name and a `has_future_breakage` bool, so
all lints can have those, error code or not.
`is_force_warn` is only possible for diagnostics with `Level::Warning`,
but it is currently stored in `Diagnostic::code`, which every diagnostic
has.
This commit:
- removes the boolean `DiagnosticId::Lint::is_force_warn` field;
- adds a `ForceWarning` variant to `Level`.
Benefits:
- The common `Level::Warning` case now has no arguments, replacing
lots of `Warning(None)` occurrences.
- `rustc_session::lint::Level` and `rustc_errors::Level` are more
similar, both having `ForceWarning` and `Warning`.
Because it's redundant w.r.t. `Diagnostic::is_lint`, which is present
for every diagnostic level.
`struct_lint_level_impl` was the only place that set the `Error` field
to `true`, and it's also the only place that calls
`Diagnostic::is_lint()` to set the `is_lint` field.
It's not used, and doesn't quite fit the general pattern.
Also, `Diagnostic::downgrade_to_delayed_bug` doesn't need to return
`&mut Self` for the same reason.
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
Lots of vectors of messages called `message` or `msg`. This commit
pluralizes them.
Note that `emit_message_default` and `emit_messages_default` both
already existed, and both process a vector, so I renamed the former
`emit_messages_default_inner` because it's called by the latter.
Per #112156, using `&` in `format!` may cause a small perf delay, so I tried to clean up one module at a time format usage. This PR includes a few removals of the ref in format (they do compile locally without the ref), as well as a few format inlining for consistency.
