It lints against features that are inteded to be internal to the
compiler and standard library. Implements MCP #596.
We allow `internal_features` in the standard library and compiler as those
use many features and this _is_ the standard library from the "internal to the compiler and
standard library" after all.
Marking some features as internal wasn't exactly the most scientific approach, I just marked some
mostly obvious features. While there is a categorization in the macro,
it's not very well upheld (should probably be fixed in another PR).
We always pass `-Ainternal_features` in the testsuite
About 400 UI tests and several other tests use internal features.
Instead of throwing the attribute on each one, just always allow them.
There's nothing wrong with testing internal features^^
There's currently a deadlock with tracing when RUSTC_LOG is enabled.
Downgrade tracing-core for now to avoid blocking the other updates.
syns upgrades cause some nontrivial changes in the diagnostics derive tests,
which are best dealt with in another PR.
Validate fluent variable references in tests
Closes#101109
Under `cfg(test)`, the `fluent_messages` macro will emit a list of variables referenced by each message and its attributes. The derive attribute will now emit a `#[test]` that checks that each referenced variable exists in the structure it's applied to.
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
Remove `remap_env_constness` in queries
This removes some of the complexities with const traits. #88119 used to be caused by this but was fixed by `param_env = param_env.without_const()`.
Migrate most of `rustc_builtin_macros` to diagnostic impls
cc #100717
This is a couple of days work, but I decided to stop for now before the PR becomes too big. There's around 50 unresolved failures when `rustc::untranslatable_diagnostic` is denied, which I'll finish addressing once this PR goes thtough
A couple of outputs have changed, but in all instances I think the changes are an improvement/are more consistent with other diagnostics (although I'm happy to revert any which seem worse)
Remove type-traversal trait aliases
#107924 moved the type traversal (folding and visiting) traits into the type library, but created trait aliases in `rustc_middle` to minimise both the API churn for trait consumers and the arising boilerplate. As mentioned in that PR, an alternative approach of defining subtraits with blanket implementations of the respective supertraits was also considered at that time but was ruled out as not adding much value.
Unfortunately, it has since emerged that rust-analyzer has difficulty with these trait aliases at present, resulting in a degraded contributor experience (see the recent [r-a has become useless](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/r-a.20has.20become.20useless) topic on the #t-compiler/help Zulip stream).
This PR removes the trait aliases, and accordingly the underlying type library traits are now used directly; they are parameterised by `TyCtxt<'tcx>` rather than just the `'tcx` lifetime, and imports have been updated to reflect the fact that the trait aliases' explicitly named traits are no longer automatically brought into scope. These changes also roll-back the (no-longer required) workarounds to #107747 that were made in b409329c62.
Since this PR is just a find+replace together with the changes necessary for compilation & tidy to pass, it's currently just one mega-commit. Let me know if you'd like it broken up.
r? `@oli-obk`
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Switching them to `Break(())` and `Continue(())` instead.
libs-api would like to remove these constants, so stop using them in compiler to make the removal PR later smaller.
Convert all the crates that have had their diagnostic migration
completed (except save_analysis because that will be deleted soon and
apfloat because of the licensing problem).
Improve syntax of `newtype_index`
This makes it more like proper Rust and also makes the implementation a lot simpler.
Mostly just turns weird flags in the body into proper attributes.
It should probably also be converted to an attribute macro instead of function-like, but that can be done in a future PR.
Remove the `..` from the body, only a few invocations used it and it's
inconsistent with rust syntax.
Use `;` instead of `,` between consts. As the Rust syntax gods inteded.
This removes the `custom` format functionality as its only user was
trivially migrated to using a normal format.
If a new use case for a custom formatting impl pops up, you can add it
back.
feed resolver_for_lowering instead of storing it in a field
r? `@cjgillot`
opening this as
* a discussion for `no_hash` + `feedable` queries. I think we'll want those, but I don't quite understand why they are rejected beyond a double check of the stable hashes for situations where the query is fed but also read from incremental caches.
* and a discussion on removing all untracked fields from TyCtxt and setting it up so that they are fed queries instead
Manually implement PartialEq for Option<T> and specialize non-nullable types
This PR manually implements `PartialEq` and `StructuralPartialEq` for `Option`, which seems to produce slightly better codegen than the automatically derived implementation.
It also allows specializing on the `core::num::NonZero*` and `core::ptr::NonNull` types, taking advantage of the niche optimization by transmuting the `Option<T>` to `T` to be compared directly, which can be done in just two instructions.
A comparison of the original, new and specialized code generation is available [here](https://godbolt.org/z/dE4jxdYsa).
Change #[suggestion_*] attributes to use style="..."
As discussed [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20tool_only_span_suggestion), this changes `#[(multipart_)suggestion_{short,verbose,hidden}(...)]` attributes to plain `#[(multipart_)suggestion(...)]` attributes with a `style = "{short,verbose,hidden}"` parameter.
It also adds a new style, `tool-only`, that corresponds to `tool_only_span_suggestion`/`tool_only_multipart_suggestion` and causes the suggestion to not be shown in human-readable output at all.
Best reviewed commit-by-commit, there's a bit of noise in there.
cc #100717 `@compiler-errors`
r? `@davidtwco`
Track where diagnostics were created.
This implements the `-Ztrack-diagnostics` flag, which uses `#[track_caller]` to track where diagnostics are created. It is meant as a debugging tool much like `-Ztreat-err-as-bug`.
For example, the following code...
```rust
struct A;
struct B;
fn main(){
let _: A = B;
}
```
...now emits the following error message:
```
error[E0308]: mismatched types
--> src\main.rs:5:16
|
5 | let _: A = B;
| - ^ expected struct `A`, found struct `B`
| |
| expected due to this
-Ztrack-diagnostics: created at compiler\rustc_infer\src\infer\error_reporting\mod.rs:2275:31
```
This allows porting uses of span_suggestions() to diagnostic structs.
Doesn't work for multipart_suggestions() because the rank would be
reversed - the struct would specify multiple spans, each of which has
multiple possible replacements, while multipart_suggestions() creates
multiple possible replacements, each with multiple spans.
Sometimes it is convenient to return a subdiagnostic enum where one or
more of the variants don't add anything to the diagnostic.
Signed-off-by: David Wood <david.wood@huawei.com>
Documentation comments shouldn't affect the diagnostic derive in any
way, but explicit support has to be added for ignoring the `doc`
attribute.
Signed-off-by: David Wood <david.wood@huawei.com>
Queries can provide an arbitrary expression for their description and
their caching behavior. Before, these expressions where stored in a
`rustc_query_description` macro emitted by the `rustc_queries` macro,
and then used in `rustc_query_impl` to fill out the methods for the
`QueryDescription` trait.
Instead, we now emit two new modules from `rustc_queries` containing the
functions with the expressions. `rustc_query_impl` calls these functions
now instead of invoking the macro.
Since we are now defining some of the functions in
`rustc_middle::query`, we now need all the imports for the key types
there as well.
Following the approach taken in earlier commits to separate formatting
initialization from use in the subdiagnostic derive, simplify the
diagnostic derive by removing the field-ordering logic that previously
solved this problem.
Signed-off-by: David Wood <david.wood@huawei.com>
Diagnostic derives have previously had to take special care when
ordering the generated code so that fields were not used after a move.
This is unlikely for most fields because a field is either annotated
with a subdiagnostic attribute and is thus likely a `Span` and copiable,
or is a argument, in which case it is only used once by `set_arg`
anyway.
However, format strings for code in suggestions can result in fields
being used after being moved if not ordered carefully. As a result, the
derive currently puts `set_arg` calls last (just before emission), such
as:
```rust
let diag = { /* create diagnostic */ };
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
format!("{}", __binding_0),
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.emit();
```
For eager translation, this doesn't work, as the message being
translated eagerly can assume that all arguments are available - so
arguments _must_ be set first.
Format strings for suggestion code are now separated into two parts - an
initialization line that performs the formatting into a variable, and a
usage in the subdiagnostic addition.
By separating these parts, the initialization can happen before
arguments are set, preserving the desired order so that code compiles,
while still enabling arguments to be set before subdiagnostics are
added.
```rust
let diag = { /* create diagnostic */ };
let __code_0 = format!("{}", __binding_0);
/* + other formatting */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
__code_0,
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.emit();
```
Signed-off-by: David Wood <david.wood@huawei.com>
Add support for `eager` argument to the `subdiagnostic` attribute which
generates a call to `eager_subdiagnostic`.
Signed-off-by: David Wood <david.wood@huawei.com>
`AddToDiagnostic::add_to_diagnostic_with` is similar to the previous
`AddToDiagnostic::add_to_diagnostic` but takes a function that can be
used by the caller to modify diagnostic messages originating from the
subdiagnostic (such as performing translation eagerly).
`add_to_diagnostic` now just calls `add_to_diagnostic_with` with an
empty closure.
Signed-off-by: David Wood <david.wood@huawei.com>
