Use Set instead of Vec in transitive_relation
Helps with #103195. It doesn't fix the underlying quadraticness but it makes it _a lot_ faster to an extent where even doubling the amount of nested references still takes less than two seconds (50s on nightly).
I want to see whether this causes regressions (because the vec was usually quite small) or improvements (as lookup for bigger sets is now much faster) in real code.
Remove "execute" bit from lock file permissions
Previously, flock would set the "execute" bit on Rust lock files. That makes no sense.
This patch clears the "execute" bit on Rust lock files.
See issue #102531.
Remove `-Ztime`
Because it has a lot of overlap with `-Ztime-passes` but is generally less useful. Plus some related cleanups.
Best reviewed one commit at a time.
r? `@davidtwco`
`print_time_passes_entry` unconditionally prints data about a pass. The
most commonly used call site, in `VerboseTimingGuard::drop`, guards it
with a `should_print_passes` test. But there are a couple of other call
sites that don't do that test.
This commit moves the `should_print_passes` test within
`print_time_passes_entry` so that all passes are treated equally.
The compiler currently has `-Ztime` and `-Ztime-passes`. I've used
`-Ztime-passes` for years but only recently learned about `-Ztime`.
What's the difference? Let's look at the `-Zhelp` output:
```
-Z time=val -- measure time of rustc processes (default: no)
-Z time-passes=val -- measure time of each rustc pass (default: no)
```
The `-Ztime-passes` description is clear, but the `-Ztime` one is less so.
Sounds like it measures the time for the entire process?
No. The real difference is that `-Ztime-passes` prints out info about passes,
and `-Ztime` does the same, but only for a subset of those passes. More
specifically, there is a distinction in the profiling code between a "verbose
generic activity" and an "extra verbose generic activity". `-Ztime-passes`
prints both kinds, while `-Ztime` only prints the first one. (It took me
a close reading of the source code to determine this difference.)
In practice this distinction has low value. Perhaps in the past the "extra
verbose" output was more voluminous, but now that we only print stats for a
pass if it exceeds 5ms or alters the RSS, `-Ztime-passes` is less spammy. Also,
a lot of the "extra verbose" cases are for individual lint passes, and you need
to also use `-Zno-interleave-lints` to see those anyway.
Therefore, this commit removes `-Ztime` and the associated machinery. One thing
to note is that the existing "extra verbose" activities all have an extra
string argument, so the commit adds the ability to accept an extra argument to
the "verbose" activities.
Make cycle errors recoverable
In particular, this allows rustdoc to recover from cycle errors when normalizing associated types for documentation.
In the past, ```@jackh726``` has said we need to be careful about overflow errors: https://github.com/rust-lang/rust/pull/91430#issuecomment-983997013
> Off the top of my head, we definitely should be careful about treating overflow errors the same as
"not implemented for some reason" errors. Otherwise, you could end up with behavior that is
different depending on recursion depth. But, that might be context-dependent.
But cycle errors should be safe to unconditionally report; they don't depend on the recursion depth, they will always be an error whenever they're encountered.
Helps with https://github.com/rust-lang/rust/issues/81091.
r? ```@lcnr``` cc ```@matthewjasper```
In particular, this allows rustdoc to recover from cycle errors when normalizing associated types for documentation.
In the past, `@jackh726` has said we need to be careful about overflow errors:
> Off the top of my head, we definitely should be careful about treating overflow errors the same as
"not implemented for some reason" errors. Otherwise, you could end up with behavior that is
different depending on recursion depth. But, that might be context-dependent.
But cycle errors should be safe to unconditionally report; they don't depend on the recursion depth, they will always be an error whenever they're encountered.
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Replace `rustc_data_structures::thin_vec::ThinVec` with `thin_vec::ThinVec`
`rustc_data_structures::thin_vec::ThinVec` looks like this:
```
pub struct ThinVec<T>(Option<Box<Vec<T>>>);
```
It's just a zero word if the vector is empty, but requires two
allocations if it is non-empty. So it's only usable in cases where the
vector is empty most of the time.
This commit removes it in favour of `thin_vec::ThinVec`, which is also
word-sized, but stores the length and capacity in the same allocation as
the elements. It's good in a wider variety of situation, e.g. in enum
variants where the vector is usually/always non-empty.
The commit also:
- Sorts some `Cargo.toml` dependency lists, to make additions easier.
- Sorts some `use` item lists, to make additions easier.
- Changes `clean_trait_ref_with_bindings` to take a
`ThinVec<TypeBinding>` rather than a `&[TypeBinding]`, because this
avoid some unnecessary allocations.
r? `@spastorino`
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
`rustc_data_structures::thin_vec::ThinVec` looks like this:
```
pub struct ThinVec<T>(Option<Box<Vec<T>>>);
```
It's just a zero word if the vector is empty, but requires two
allocations if it is non-empty. So it's only usable in cases where the
vector is empty most of the time.
This commit removes it in favour of `thin_vec::ThinVec`, which is also
word-sized, but stores the length and capacity in the same allocation as
the elements. It's good in a wider variety of situation, e.g. in enum
variants where the vector is usually/always non-empty.
The commit also:
- Sorts some `Cargo.toml` dependency lists, to make additions easier.
- Sorts some `use` item lists, to make additions easier.
- Changes `clean_trait_ref_with_bindings` to take a
`ThinVec<TypeBinding>` rather than a `&[TypeBinding]`, because this
avoid some unnecessary allocations.
In some places we use `Vec<Attribute>` and some places we use
`ThinVec<Attribute>` (a.k.a. `AttrVec`). This results in various points
where we have to convert between `Vec` and `ThinVec`.
This commit changes the places that use `Vec<Attribute>` to use
`AttrVec`. A lot of this is mechanical and boring, but there are
some interesting parts:
- It adds a few new methods to `ThinVec`.
- It implements `MapInPlace` for `ThinVec`, and introduces a macro to
avoid the repetition of this trait for `Vec`, `SmallVec`, and
`ThinVec`.
Overall, it makes the code a little nicer, and has little effect on
performance. But it is a precursor to removing
`rustc_data_structures::thin_vec::ThinVec` and replacing it with
`thin_vec::ThinVec`, which is implemented more efficiently.
Upgrade indexmap and thorin-dwp to use hashbrown 0.12
This removes the last dependencies on hashbrown 0.11.
This also upgrades to hashbrown 0.12.3 to fix a double-free (#99372).
Stop keeping metadata in memory before writing it to disk
Fixes#96358
I created this PR according with the instruction given in the issue except for the following points:
- While the issue says "Write metadata into the temporary file in `encode_and_write_metadata` even if `!need_metadata_file`", I could not do that. That is because though I tried to do that and run `x.py test`, I got a lot of test failures as follows.
<details>
<summary>List of failed tests</summary>
<pre>
<code>
failures:
[ui] src/test/ui/json-multiple.rs
[ui] src/test/ui/json-options.rs
[ui] src/test/ui/rmeta/rmeta-rpass.rs
[ui] src/test/ui/save-analysis/emit-notifications.rs
[ui] src/test/ui/svh/changing-crates.rs
[ui] src/test/ui/svh/svh-change-lit.rs
[ui] src/test/ui/svh/svh-change-significant-cfg.rs
[ui] src/test/ui/svh/svh-change-trait-bound.rs
[ui] src/test/ui/svh/svh-change-type-arg.rs
[ui] src/test/ui/svh/svh-change-type-ret.rs
[ui] src/test/ui/svh/svh-change-type-static.rs
[ui] src/test/ui/svh/svh-use-trait.rs
test result: FAILED. 12915 passed; 12 failed; 100 ignored; 0 measured; 0 filtered out; finished in 71.41s
Some tests failed in compiletest suite=ui mode=ui host=x86_64-unknown-linux-gnu target=x86_64-unknown-linux-gnu
Build completed unsuccessfully in 0:01:58
</code>
</pre>
</details>
- I could not resolve the extra tasks about `create_rmeta_file` and `create_compressed_metadata_file` for my lack of ability.
Fix RSS reporting on macOS
> NOTE: This is a duplicate of #98164, which I closed because I borked my rustc fork
Currently, `rustc_data_structures::profiling::get_resident_set_size()` always returns `None` on macOS. This is because
macOS does not implement procfs used in the unix version of the function:
```rust
...
else if #[cfg(unix)] {
pub fn get_resident_set_size() -> Option<usize> {
let field = 1;
let contents = fs::read("/proc/self/statm").ok()?;
let contents = String::from_utf8(contents).ok()?;
let s = contents.split_whitespace().nth(field)?;
let npages = s.parse::<usize>().ok()?;
Some(npages * 4096)
}
...
```
The proposed solution uses libproc, and more specifically `proc_pidinfo`, which has been available on macOS since 10.5 if the function signature inside libproc.h is to be believed:
```c
int proc_pidinfo(int pid, int flavor, uint64_t arg, void *buffer, int buffersize) __OSX_AVAILABLE_STARTING(__MAC_10_5, __IPHONE_2_0);
```
Rename rustc_serialize::opaque::Encoder as MemEncoder.
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
(This was previously merged as commit 5 in #94732 and then was reverted
in #97905 because of a perf regression caused by commit 4 in #94732.)
r? ```@bjorn3```
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
(This was previously merged as commit 5 in #94732 and then was reverted
in #97905 because of a perf regression caused by commit 4 in #94732.)
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
There are two impls of the `Encoder` trait: `opaque::Encoder` and
`opaque::FileEncoder`. The former encodes into memory and is infallible, the
latter writes to file and is fallible.
Currently, standard `Result`/`?`/`unwrap` error handling is used, but this is a
bit verbose and has non-trivial cost, which is annoying given how rare failures
are (especially in the infallible `opaque::Encoder` case).
This commit changes how `Encoder` fallibility is handled. All the `emit_*`
methods are now infallible. `opaque::Encoder` requires no great changes for
this. `opaque::FileEncoder` now implements a delayed error handling strategy.
If a failure occurs, it records this via the `res` field, and all subsequent
encoding operations are skipped if `res` indicates an error has occurred. Once
encoding is complete, the new `finish` method is called, which returns a
`Result`. In other words, there is now a single `Result`-producing method
instead of many of them.
This has very little effect on how any file errors are reported if
`opaque::FileEncoder` has any failures.
Much of this commit is boring mechanical changes, removing `Result` return
values and `?` or `unwrap` from expressions. The more interesting parts are as
follows.
- serialize.rs: The `Encoder` trait gains an `Ok` associated type. The
`into_inner` method is changed into `finish`, which returns
`Result<Vec<u8>, !>`.
- opaque.rs: The `FileEncoder` adopts the delayed error handling
strategy. Its `Ok` type is a `usize`, returning the number of bytes
written, replacing previous uses of `FileEncoder::position`.
- Various methods that take an encoder now consume it, rather than being
passed a mutable reference, e.g. `serialize_query_result_cache`.
Because it really has two halves:
- A read-only part that checks if further work is needed.
- The further work part, which is much less hot.
This makes things a bit clearer and nicer.
It creates the src pointer first, which is then invalidated by a
unique borrow of the destination pointer. Swap the borrows around
to fix this. Found with miri.
Some tests took too long and owning_ref is fundamentally flawed,
so don't run these tests or run them with a shorter N. This makes
miri with `-Zmiri-strict-provenance` usable to find UB.
Begin fixing all the broken doctests in `compiler/`
Begins to fix#95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
Fixing #95444 by only displaying passes that take more than 5 millise…
As discussed in #95444, I have added the code to test and only display prints that are greater than 5 milliseconds.
r? `@jyn514`
Add a dedicated length-prefixing method to `Hasher`
This accomplishes two main goals:
- Make it clear who is responsible for prefix-freedom, including how they should do it
- Make it feasible for a `Hasher` that *doesn't* care about Hash-DoS resistance to get better performance by not hashing lengths
This does not change rustc-hash, since that's in an external crate, but that could potentially use it in future.
Fixes#94026
r? rust-lang/libs
---
The core of this change is the following two new methods on `Hasher`:
```rust
pub trait Hasher {
/// Writes a length prefix into this hasher, as part of being prefix-free.
///
/// If you're implementing [`Hash`] for a custom collection, call this before
/// writing its contents to this `Hasher`. That way
/// `(collection![1, 2, 3], collection![4, 5])` and
/// `(collection![1, 2], collection![3, 4, 5])` will provide different
/// sequences of values to the `Hasher`
///
/// The `impl<T> Hash for [T]` includes a call to this method, so if you're
/// hashing a slice (or array or vector) via its `Hash::hash` method,
/// you should **not** call this yourself.
///
/// This method is only for providing domain separation. If you want to
/// hash a `usize` that represents part of the *data*, then it's important
/// that you pass it to [`Hasher::write_usize`] instead of to this method.
///
/// # Examples
///
/// ```
/// #![feature(hasher_prefixfree_extras)]
/// # // Stubs to make the `impl` below pass the compiler
/// # struct MyCollection<T>(Option<T>);
/// # impl<T> MyCollection<T> {
/// # fn len(&self) -> usize { todo!() }
/// # }
/// # impl<'a, T> IntoIterator for &'a MyCollection<T> {
/// # type Item = T;
/// # type IntoIter = std::iter::Empty<T>;
/// # fn into_iter(self) -> Self::IntoIter { todo!() }
/// # }
///
/// use std:#️⃣:{Hash, Hasher};
/// impl<T: Hash> Hash for MyCollection<T> {
/// fn hash<H: Hasher>(&self, state: &mut H) {
/// state.write_length_prefix(self.len());
/// for elt in self {
/// elt.hash(state);
/// }
/// }
/// }
/// ```
///
/// # Note to Implementers
///
/// If you've decided that your `Hasher` is willing to be susceptible to
/// Hash-DoS attacks, then you might consider skipping hashing some or all
/// of the `len` provided in the name of increased performance.
#[inline]
#[unstable(feature = "hasher_prefixfree_extras", issue = "88888888")]
fn write_length_prefix(&mut self, len: usize) {
self.write_usize(len);
}
/// Writes a single `str` into this hasher.
///
/// If you're implementing [`Hash`], you generally do not need to call this,
/// as the `impl Hash for str` does, so you can just use that.
///
/// This includes the domain separator for prefix-freedom, so you should
/// **not** call `Self::write_length_prefix` before calling this.
///
/// # Note to Implementers
///
/// The default implementation of this method includes a call to
/// [`Self::write_length_prefix`], so if your implementation of `Hasher`
/// doesn't care about prefix-freedom and you've thus overridden
/// that method to do nothing, there's no need to override this one.
///
/// This method is available to be overridden separately from the others
/// as `str` being UTF-8 means that it never contains `0xFF` bytes, which
/// can be used to provide prefix-freedom cheaper than hashing a length.
///
/// For example, if your `Hasher` works byte-by-byte (perhaps by accumulating
/// them into a buffer), then you can hash the bytes of the `str` followed
/// by a single `0xFF` byte.
///
/// If your `Hasher` works in chunks, you can also do this by being careful
/// about how you pad partial chunks. If the chunks are padded with `0x00`
/// bytes then just hashing an extra `0xFF` byte doesn't necessarily
/// provide prefix-freedom, as `"ab"` and `"ab\u{0}"` would likely hash
/// the same sequence of chunks. But if you pad with `0xFF` bytes instead,
/// ensuring at least one padding byte, then it can often provide
/// prefix-freedom cheaper than hashing the length would.
#[inline]
#[unstable(feature = "hasher_prefixfree_extras", issue = "88888888")]
fn write_str(&mut self, s: &str) {
self.write_length_prefix(s.len());
self.write(s.as_bytes());
}
}
```
With updates to the `Hash` implementations for slices and containers to call `write_length_prefix` instead of `write_usize`.
`write_str` defaults to using `write_length_prefix` since, as was pointed out in the issue, the `write_u8(0xFF)` approach is insufficient for hashers that work in chunks, as those would hash `"a\u{0}"` and `"a"` to the same thing. But since `SipHash` works byte-wise (there's an internal buffer to accumulate bytes until a full chunk is available) it overrides `write_str` to continue to use the add-non-UTF-8-byte approach.
---
Compatibility:
Because the default implementation of `write_length_prefix` calls `write_usize`, the changed hash implementation for slices will do the same thing the old one did on existing `Hasher`s.
This accomplishes two main goals:
- Make it clear who is responsible for prefix-freedom, including how they should do it
- Make it feasible for a `Hasher` that *doesn't* care about Hash-DoS resistance to get better performance by not hashing lengths
This does not change rustc-hash, since that's in an external crate, but that could potentially use it in future.
95444: Adding passes that include memory increase
Fix95444: Change the substraction with the abs_diff() method
Fix95444: Change the substraction with abs_diff() method
rustc_metadata: Do not encode unnecessary module children
This should remove the syntax context shift and the special case for `ExternCrate` in decoder in https://github.com/rust-lang/rust/pull/95880.
This PR also shifts some work from decoding to encoding, which is typically useful for performance (but probably not much in this case).
r? `@cjgillot`
Allow self-profiler to only record potentially costly arguments when argument recording is turned on
As discussed [on zulip](https://rust-lang.zulipchat.com/#narrow/stream/247081-t-compiler.2Fperformance/topic/Identifying.20proc-macro.20slowdowns/near/277304909) with `@wesleywiser,` I'd like to record proc-macro expansions in the self-profiler, with some detailed data (per-expansion spans for example, to follow #95473).
At the same time, I'd also like to avoid doing expensive things when tracking a generic activity's arguments, if they were not specifically opted into the event filter mask, to allow the self-profiler to be used in hotter contexts.
This PR tries to offer:
- a way to ensure a closure to record arguments will only be called in that situation, so that potentially costly arguments can still be recorded when needed. With the additional requirement that, if possible, it would offer a way to record non-owned data without adding many `generic_activity_with_arg_{...}`-style methods. This lead to the `generic_activity_with_arg_recorder` single entry-point, and the closure parameter would offer the new methods, able to be executed in a context where costly argument could be created without disturbing the profiled piece of code.
- some facilities/patterns allowing to record more rustc specific data in this situation, without making `rustc_data_structures` where the self-profiler is defined, depend on other rustc crates (causing circular dependencies): in particular, spans. They are quite tricky to turn into strings (if the default `Debug` impl output does not match the context one needs them for), and since I'd also like to avoid the allocation there when arg recording is turned off today, that has turned into another flexibility requirement for the API in this PR (separating the span-specific recording into an extension trait). **edit**: I've removed this from the PR so that it's easier to review, and opened https://github.com/rust-lang/rust/pull/95739.
- allow for extensibility in the future: other ways to record arguments, or additional data attached to them could be added in the future (e.g. recording the argument's name as well as its data).
Some areas where I'd love feedback:
- the API and names: the `EventArgRecorder` and its method for example. As well as the verbosity that comes from the increased flexibility.
- if I should convert the existing `generic_activity_with_arg{s}` to just forward to `generic_activity_with_arg_recorder` + `recorder.record_arg` (or remove them altogether ? Probably not): I've used the new API in the simple case I could find of allocating for an arg that may not be recorded, and the rest don't seem costly.
- [x] whether this API should panic if no arguments were recorded by the user-provided closure (like this PR currently does: it seems like an error to use an API dedicated to record arguments but not call the methods to then do so) or if this should just record a generic activity without arguments ?
- whether the `record_arg` function should be `#[inline(always)]`, like the `generic_activity_*` functions ?
As mentioned, r? `@wesleywiser` following our recent discussion.
make unaligned_references lint deny-by-default
This lint has been warn-by-default for a year now (since https://github.com/rust-lang/rust/pull/82525), so I think it is time to crank it up a bit. Code that triggers the lint causes UB (without `unsafe`) when executed, so we really don't want people to write code like this.
Cached stable hash cleanups
r? `@nnethercote`
Add a sanity assertion in debug mode to check that the cached hashes are actually the ones we get if we compute the hash each time.
Add a new data structure that bundles all the hash-caching work to make it easier to re-use it for different interned data structures
Enforce well formedness for type alias impl trait's hidden type
fixes#84657
This was not an issue with return-position-impl-trait because the generic bounds of the function are the same as those of the opaque type, and the hidden type must already be well formed within the function.
With type-alias-impl-trait the hidden type could be defined in a function that has *more* lifetime bounds than the type alias. This is fine, but the hidden type must still be well formed without those additional bounds.
This allows profiling costly arguments to be recorded only when `-Zself-profile-events=args` is on: using a closure that takes an `EventArgRecorder` and call its `record_arg` or `record_args` methods.
Add debug assertions to some unsafe functions
As suggested by https://github.com/rust-lang/rust/issues/51713
~~Some similar code calls `abort()` instead of `panic!()` but aborting doesn't work in a `const fn`, and the intrinsic for doing dispatch based on whether execution is in a const is unstable.~~
This picked up some invalid uses of `get_unchecked` in the compiler, and fixes them.
I can confirm that they do in fact pick up invalid uses of `get_unchecked` in the wild, though the user experience is less-than-awesome:
```
Running unittests (target/x86_64-unknown-linux-gnu/debug/deps/rle_decode_fast-04b7918da2001b50)
running 6 tests
error: test failed, to rerun pass '--lib'
Caused by:
process didn't exit successfully: `/home/ben/rle-decode-helper/target/x86_64-unknown-linux-gnu/debug/deps/rle_decode_fast-04b7918da2001b50` (signal: 4, SIGILL: illegal instruction)
```
~~As best I can tell these changes produce a 6% regression in the runtime of `./x.py test` when `[rust] debug = true` is set.~~
Latest commit (6894d559bd) brings the additional overhead from this PR down to 0.5%, while also adding a few more assertions. I think this actually covers all the places in `core` that it is reasonable to check for safety requirements at runtime.
Thoughts?
Rollup of 5 pull requests
Successful merges:
- #95294 (Document Linux kernel handoff in std::io::copy and std::fs::copy)
- #95443 (Clarify how `src/tools/x` searches for python)
- #95452 (fix since field version for termination stabilization)
- #95460 (Spellchecking compiler code)
- #95461 (Spellchecking some comments)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Lazy type-alias-impl-trait take two
### user visible change 1: RPIT inference from recursive call sites
Lazy TAIT has an insta-stable change. The following snippet now compiles, because opaque types can now have their hidden type set from wherever the opaque type is mentioned.
```rust
fn bar(b: bool) -> impl std::fmt::Debug {
if b {
return 42
}
let x: u32 = bar(false); // this errors on stable
99
}
```
The return type of `bar` stays opaque, you can't do `bar(false) + 42`, you need to actually mention the hidden type.
### user visible change 2: divergence between RPIT and TAIT in return statements
Note that `return` statements and the trailing return expression are special with RPIT (but not TAIT). So
```rust
#![feature(type_alias_impl_trait)]
type Foo = impl std::fmt::Debug;
fn foo(b: bool) -> Foo {
if b {
return vec![42];
}
std::iter::empty().collect() //~ ERROR `Foo` cannot be built from an iterator
}
fn bar(b: bool) -> impl std::fmt::Debug {
if b {
return vec![42]
}
std::iter::empty().collect() // Works, magic (accidentally stabilized, not intended)
}
```
But when we are working with the return value of a recursive call, the behavior of RPIT and TAIT is the same:
```rust
type Foo = impl std::fmt::Debug;
fn foo(b: bool) -> Foo {
if b {
return vec![];
}
let mut x = foo(false);
x = std::iter::empty().collect(); //~ ERROR `Foo` cannot be built from an iterator
vec![]
}
fn bar(b: bool) -> impl std::fmt::Debug {
if b {
return vec![];
}
let mut x = bar(false);
x = std::iter::empty().collect(); //~ ERROR `impl Debug` cannot be built from an iterator
vec![]
}
```
### user visible change 3: TAIT does not merge types across branches
In contrast to RPIT, TAIT does not merge types across branches, so the following does not compile.
```rust
type Foo = impl std::fmt::Debug;
fn foo(b: bool) -> Foo {
if b {
vec![42_i32]
} else {
std::iter::empty().collect()
//~^ ERROR `Foo` cannot be built from an iterator over elements of type `_`
}
}
```
It is easy to support, but we should make an explicit decision to include the additional complexity in the implementation (it's not much, see a721052457cf513487fb4266e3ade65c29b272d2 which needs to be reverted to enable this).
### PR formalities
previous attempt: #92007
This PR also includes #92306 and #93783, as they were reverted along with #92007 in #93893fixes#93411fixes#88236fixes#89312fixes#87340fixes#86800fixes#86719fixes#84073fixes#83919fixes#82139fixes#77987fixes#74282fixes#67830fixes#62742fixes#54895
These debug assertions are all implemented only at runtime using
`const_eval_select`, and in the error path they execute
`intrinsics::abort` instead of being a normal debug assertion to
minimize the impact of these assertions on code size, when enabled.
Of all these changes, the bounds checks for unchecked indexing are
expected to be most impactful (case in point, they found a problem in
rustc).
`Layout` is another type that is sometimes interned, sometimes not, and
we always use references to refer to it so we can't take any advantage
of the uniqueness properties for hashing or equality checks.
This commit renames `Layout` as `LayoutS`, and then introduces a new
`Layout` that is a newtype around an `Interned<LayoutS>`. It also
interns more layouts than before. Previously layouts within layouts
(via the `variants` field) were never interned, but now they are. Hence
the lifetime on the new `Layout` type.
Unlike other interned types, these ones are in `rustc_target` instead of
`rustc_middle`. This reflects the existing structure of the code, which
does layout-specific stuff in `rustc_target` while `TyAndLayout` is
generic over the `Ty`, allowing the type-specific stuff to occur in
`rustc_middle`.
The commit also adds a `HashStable` impl for `Interned`, which was
needed. It hashes the contents, unlike the `Hash` impl which hashes the
pointer.
Currently some `Allocation`s are interned, some are not, and it's very
hard to tell at a use point which is which.
This commit introduces `ConstAllocation` for the known-interned ones,
which makes the division much clearer. `ConstAllocation::inner()` is
used to get the underlying `Allocation`.
In some places it's natural to use an `Allocation`, in some it's natural
to use a `ConstAllocation`, and in some places there's no clear choice.
I've tried to make things look as nice as possible, while generally
favouring `ConstAllocation`, which is the type that embodies more
information. This does require quite a few calls to `inner()`.
The commit also tweaks how `PartialOrd` works for `Interned`. The
previous code was too clever by half, building on `T: Ord` to make the
code shorter. That caused problems with deriving `PartialOrd` and `Ord`
for `ConstAllocation`, so I changed it to build on `T: PartialOrd`,
which is slightly more verbose but much more standard and avoided the
problems.
Always include global target features in function attributes
This ensures that information about target features configured with
`-C target-feature=...` or detected with `-C target-cpu=native` is
retained for subsequent consumers of LLVM bitcode.
This is crucial for linker plugin LTO, since this information is not
conveyed to the plugin otherwise.
<details><summary>Additional test case demonstrating the issue</summary>
```rust
extern crate core;
#[inline]
#[target_feature(enable = "aes")]
unsafe fn f(a: u128, b: u128) -> u128 {
use core::arch::x86_64::*;
use core::mem::transmute;
transmute(_mm_aesenc_si128(transmute(a), transmute(b)))
}
pub fn g(a: u128, b: u128) -> u128 {
unsafe { f(a, b) }
}
fn main() {
let mut args = std::env::args();
let _ = args.next().unwrap();
let a: u128 = args.next().unwrap().parse().unwrap();
let b: u128 = args.next().unwrap().parse().unwrap();
println!("{}", g(a, b));
}
```
```console
$ rustc --edition=2021 a.rs -Clinker-plugin-lto -Clink-arg=-fuse-ld=lld -Ctarget-feature=+aes -O
...
= note: LLVM ERROR: Cannot select: intrinsic %llvm.x86.aesni.aesenc
```
</details>
r? `@nagisa`
Rollup of 9 pull requests
Successful merges:
- #94464 (Suggest adding a new lifetime parameter when two elided lifetimes should match up for traits and impls.)
- #94476 (7 - Make more use of `let_chains`)
- #94478 (Fix panic when handling intra doc links generated from macro)
- #94482 (compiler: fix some typos)
- #94490 (Update books)
- #94496 (tests: accept llvm intrinsic in align-checking test)
- #94498 (9 - Make more use of `let_chains`)
- #94503 (Provide C FFI types via core::ffi, not just in std)
- #94513 (update Miri)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Avoid query cache sharding code in single-threaded mode
In non-parallel compilers, this is just adding needless overhead at compilation time (since there is only one shard statically anyway). This amounts to roughly ~10 seconds reduction in bootstrap time, with overall neutral (some wins, some losses) performance results.
Parallel compiler performance should be largely unaffected by this PR; sharding is kept there.
Avoid exhausting stack space in dominator compression
Doesn't add a test case -- I ended up running into this while playing with the generated example from #43578, which we could do with a run-make test (to avoid checking a large code snippet into tree), but I suspect we don't want to wait for it to compile (locally it takes ~14s -- not terrible, but doesn't seem worth it to me). In practice stack space exhaustion is difficult to test for, too, since if we set the bound too low a different call structure above us (e.g., a nearer ensure_sufficient_stack call) would let the test pass even with the old impl, most likely.
Locally it seems like this manages to perform approximately equivalently to the recursion, but will run perf to confirm.
Introduce `ChunkedBitSet` and use it for some dataflow analyses.
This reduces peak memory usage significantly for some programs with very
large functions.
r? `@ghost`
This reduces peak memory usage significantly for some programs with very
large functions, such as:
- `keccak`, `unicode_normalization`, and `match-stress-enum`, from
the `rustc-perf` benchmark suite;
- `http-0.2.6` from crates.io.
The new type is used in the analyses where the bitsets can get huge
(e.g. 10s of thousands of bits): `MaybeInitializedPlaces`,
`MaybeUninitializedPlaces`, and `EverInitializedPlaces`.
Some refactoring was required in `rustc_mir_dataflow`. All existing
analysis domains are either `BitSet` or a trivial wrapper around
`BitSet`, and access in a few places is done via `Borrow<BitSet>` or
`BorrowMut<BitSet>`. Now that some of these domains are `ClusterBitSet`,
that no longer works. So this commit replaces the `Borrow`/`BorrowMut`
usage with a new trait `BitSetExt` containing the needed bitset
operations. The impls just forward these to the underlying bitset type.
This required fiddling with trait bounds in a few places.
The commit also:
- Moves `static_assert_size` from `rustc_data_structures` to
`rustc_index` so it can be used in the latter; the former now
re-exports it so existing users are unaffected.
- Factors out some common "clear excess bits in the final word"
functionality in `bit_set.rs`.
- Uses `fill` in a few places instead of loops.
Allow inlining of `ensure_sufficient_stack()`
This functions is monomorphized a lot and allowing the compiler to inline it improves instructions count and max RSS significantly in my local tests.
In particular, there's now more protection against incorrect usage,
because you can only create one via `Interned::new_unchecked`, which
makes it more obvious that you must be careful.
There are also some tests.
Compress amount of hashed bytes for `isize` values in StableHasher
This is another attempt to land https://github.com/rust-lang/rust/pull/92103, this time hopefully with a correct implementation w.r.t. stable hashing guarantees. The previous PR was [reverted](https://github.com/rust-lang/rust/pull/93014) because it could produce the [same hash](https://github.com/rust-lang/rust/pull/92103#issuecomment-1014625442) for different values even in quite simple situations. I have since added a basic [test](https://github.com/rust-lang/rust/pull/93193) that should guard against that situation, I also added a new test in this PR, specialised for this optimization.
## Why this optimization helps
Since the original PR, I have tried to analyze why this optimization even helps (and why it especially helps for `clap`). I found that the vast majority of stable-hashing `i64` actually comes from hashing `isize` (which is converted to `i64` in the stable hasher). I only found a single place where is this datatype used directly in the compiler, and this place has also been showing up in traces that I used to find out when is `isize` being hashed. This place is `rustc_span::FileName::DocTest`, however, I suppose that isizes also come from other places, but they might not be so easy to find (there were some other entries in the trace). `clap` hashes about 8.5 million `isize`s, and all of them fit into a single byte, which is why this optimization has helped it [quite a lot](https://github.com/rust-lang/rust/pull/92103#issuecomment-1005711861).
Now, I'm not sure if special casing `isize` is the correct solution here, maybe something could be done with that `isize` inside `DocTest` or in other places, but that's for another discussion I suppose. In this PR, instead of hardcoding a special case inside `SipHasher128`, I instead put it into `StableHasher`, and only used it for `isize` (I tested that for `i64` it doesn't help, or at least not for `clap` and other few benchmarks that I was testing).
## New approach
Since the most common case is a single byte, I added a fast path for hashing `isize` values which positive value fits within a single byte, and a cold path for the rest of the values.
To avoid the previous correctness problem, we need to make sure that each unique `isize` value will produce a unique hash stream to the hasher. By hash stream I mean a sequence of bytes that will be hashed (a different sequence should produce a different hash, but that is of course not guaranteed).
We have to distinguish different values that produce the same bit pattern when we combine them. For example, if we just simply skipped the leading zero bytes for values that fit within a single byte, `(0xFF, 0xFFFFFFFFFFFFFFFF)` and `(0xFFFFFFFFFFFFFFFF, 0xFF)` would send the same hash stream to the hasher, which must not happen.
To avoid this situation, values `[0, 0xFE]` are hashed as a single byte. When we hash a larger (treating `isize` as `u64`) value, we first hash an additional byte `0xFF`. Since `0xFF` cannot occur when we apply the single byte optimization, we guarantee that the hash streams will be unique when hashing two values `(a, b)` and `(b, a)` if `a != b`:
1) When both `a` and `b` are within `[0, 0xFE]`, their hash streams will be different.
2) When neither `a` and `b` are within `[0, 0xFE]`, their hash streams will be different.
3) When `a` is within `[0, 0xFE]` and `b` isn't, when we hash `(a, b)`, the hash stream will definitely not begin with `0xFF`. When we hash `(b, a)`, the hash stream will definitely begin with `0xFF`. Therefore the hash streams will be different.
r? `@the8472`
Make `Fingerprint::combine_commutative` associative
The previous implementation swapped lower and upper 64-bits of a result
of modular addition, so the function was non-associative.
r? `@Aaron1011`
Add test for stable hash uniqueness of adjacent field values
This PR adds a simple test to check that stable hash will produce a different hash if the order of two values that have the same combined bit pattern changes.
r? `@the8472`
`Decoder` has two impls:
- opaque: this impl is already partly infallible, i.e. in some places it
currently panics on failure (e.g. if the input is too short, or on a
bad `Result` discriminant), and in some places it returns an error
(e.g. on a bad `Option` discriminant). The number of places where
either happens is surprisingly small, just because the binary
representation has very little redundancy and a lot of input reading
can occur even on malformed data.
- json: this impl is fully fallible, but it's only used (a) for the
`.rlink` file production, and there's a `FIXME` comment suggesting it
should change to a binary format, and (b) in a few tests in
non-fundamental ways. Indeed #85993 is open to remove it entirely.
And the top-level places in the compiler that call into decoding just
abort on error anyway. So the fallibility is providing little value, and
getting rid of it leads to some non-trivial performance improvements.
Much of this commit is pretty boring and mechanical. Some notes about
a few interesting parts:
- The commit removes `Decoder::{Error,error}`.
- `InternIteratorElement::intern_with`: the impl for `T` now has the same
optimization for small counts that the impl for `Result<T, E>` has,
because it's now much hotter.
- Decodable impls for SmallVec, LinkedList, VecDeque now all use
`collect`, which is nice; the one for `Vec` uses unsafe code, because
that gave better perf on some benchmarks.
Update rayon and rustc-rayon
This updates rayon for various tools and rustc-rayon for the compiler's parallel mode.
- rayon v1.3.1 -> v1.5.1
- rayon-core v1.7.1 -> v1.9.1
- rustc-rayon v0.3.1 -> v0.3.2
- rustc-rayon-core v0.3.1 -> v0.3.2
... and indirectly, this updates all of crossbeam-* to their latest versions.
Fixes#92677 by removing crossbeam-queue, but there's still a lingering question about how tidy discovers "runtime" dependencies. None of this is truly in the standard library's dependency tree at all.
Replace usages of vec![].into_iter with [].into_iter
`[].into_iter` is idiomatic over `vec![].into_iter` because its simpler and faster (unless the vec is optimized away in which case it would be the same)
So we should change all the implementation, documentation and tests to use it.
I skipped:
* `src/tools` - Those are copied in from upstream
* `src/test/ui` - Hard to tell if `vec![].into_iter` was used intentionally or not here and not much benefit to changing it.
* any case where `vec![].into_iter` was used because we specifically needed a `Vec::IntoIter<T>`
* any case where it looked like we were intentionally using `vec![].into_iter` to test it.
Fixes#92266
In some `HashStable` impls, we use a cache to avoid re-computing
the same `Fingerprint` from the same structure (e.g. an `AdtDef`).
However, the `StableHashingContext` used can be configured to
perform hashing in different ways (e.g. skipping `Span`s). This
configuration information is not included in the cache key,
which will cause an incorrect `Fingerprint` to be used if
we hash the same structure with different `StableHashingContext`
settings.
To fix this, the configuration settings of `StableHashingContext`
are split out into a separate `HashingControls` struct. This
struct is used as part of the cache key, ensuring that our caches
always produce the correct result for the given settings.
With this in place, we now turn off `Span` hashing during the
entire process of computing the hash included in legacy symbols.
This current has no effect, but will matter when a future PR
starts hashing more `Span`s that we currently skip.
Implement StableHash for BitSet and BitMatrix via Hash
This fixes an issue where bit sets / bit matrices the same word
content but a different domain size would receive the same hash.
Avoid sorting in hash map stable hashing
Suggested by `@the8472` [here](https://github.com/rust-lang/rust/pull/89404#issuecomment-991813333). I hope that I understood it right, I replaced the sort with modular multiplication, which should be commutative.
Can I ask for a perf. run? However, locally it didn't help at all. Creating the `StableHasher` all over again is probably slowing it down quite a lot. And using `FxHasher` is not straightforward, because the keys and values only implement `HashStable` (and probably they shouldn't be just hashed via `Hash` anyway for it to actually be stable).
Maybe the `StableHash` interface could be changed somehow to better suppor these scenarios where the hasher is short-lived. Or the `StableHasher` implementation could have variants with e.g. a shorter buffer for these scenarios.
Slightly optimize hash map stable hashing
I was profiling some of the `rustc-perf` benchmarks locally and noticed that quite some time is spent inside the stable hash of hashmaps. I tried to use a `SmallVec` instead of a `Vec` there, which helped very slightly.
Then I tried to remove the sorting, which was a bottleneck, and replaced it with insertion into a binary heap. Locally, it yielded nice improvements in instruction counts and RSS in several benchmarks for incremental builds. The implementation could probably be much nicer and possibly extended to other stable hashes, but first I wanted to test the perf impact properly.
Can I ask someone to do a perf run? Thank you!
This largely avoids remapping from and to the 'real' indices, with the exception
of predecessor lookup and the final merge back, and is conceptually better.
As the paper indicates, the unprocessed vertices in the DFS tree and processed
vertices are disjoint, and we can use them in the same space, tracking only the index
of the split.
This replaces the previous implementation with the simple variant of
Lengauer-Tarjan, which performs better in the general case. Performance on the
keccak benchmark is about equivalent between the two, but we don't see
regressions (and indeed see improvements) on other benchmarks, even on a
partially optimized implementation.
The implementation here follows that of the pseudocode in "Linear-Time
Algorithms for Dominators and Related Problems" thesis by Loukas Georgiadis. The
next few commits will optimize the implementation as suggested in the thesis.
Several related works are cited in the comments within the implementation, as
well.
Implement the simple Lengauer-Tarjan algorithm
This replaces the previous implementation (from #34169), which has not been
optimized since, with the simple variant of Lengauer-Tarjan which performs
better in the general case. A previous attempt -- not kept in commit history --
attempted a replacement with a bitset-based implementation, but this led to
regressions on perf.rust-lang.org benchmarks and equivalent wins for the keccak
benchmark, so was rejected.
The implementation here follows that of the pseudocode in "Linear-Time
Algorithms for Dominators and Related Problems" thesis by Loukas Georgiadis. The
next few commits will optimize the implementation as suggested in the thesis.
Several related works are cited in the comments within the implementation, as
well.
On the keccak benchmark, we were previously spending 15% of our cycles computing
the NCA / intersect function; this function is quite expensive, especially on
modern CPUs, as it chases pointers on every iteration in a tight loop. With this
commit, we spend ~0.05% of our time in dominator computation.
There's a conversation in the tracking issue about possibly unaccepting `in_band_lifetimes`, but it's used heavily in the compiler, and thus there'd need to be a bunch of PRs like this if that were to happen.
So here's one to see how much of an impact it has.
(Oh, and I removed `nll` while I was here too, since it didn't seem needed. Let me know if I should put that back.)
Implement write() method for Box<MaybeUninit<T>>
This adds method similar to `MaybeUninit::write` main difference being
it returns owned `Box`. This can be used to elide copy from stack
safely, however it's not currently tested that the optimization actually
occurs.
Analogous methods are not provided for `Rc` and `Arc` as those need to
handle the possibility of sharing. Some version of them may be added in
the future.
This was discussed in #63291 which this change extends.
This adds method similar to `MaybeUninit::write` main difference being
it returns owned `Box`. This can be used to elide copy from stack
safely, however it's not currently tested that the optimization actually
occurs.
Analogous methods are not provided for `Rc` and `Arc` as those need to
handle the possibility of sharing. Some version of them may be added in
the future.
This was discussed in #63291 which this change extends.
Revert "Add rustc lint, warning when iterating over hashmaps"
Fixes perf regressions introduced in https://github.com/rust-lang/rust/pull/90235 by temporarily reverting the relevant PR.
Particularly for ctfe-stress-4, the hashing of byte slices as part of the
MIR Allocation is quite hot. Previously, we were falling back on byte-by-byte
copying of the slice into the SipHash buffer (64 bytes long) before hashing a 64
byte chunk, and then doing that again and again.
This should hopefully be an improvement for that code.
Stabilize `const_panic`
Closes#51999
FCP completed in #89006
```@rustbot``` label +A-const-eval +A-const-fn +T-lang
cc ```@oli-obk``` for review (not `r?`'ing as not on lang team)
Rollup of 12 pull requests
Successful merges:
- #88795 (Print a note if a character literal contains a variation selector)
- #89015 (core::ascii::escape_default: reduce struct size)
- #89078 (Cleanup: Remove needless reference in ParentHirIterator)
- #89086 (Stabilize `Iterator::map_while`)
- #89096 ([bootstrap] Improve the error message when `ninja` is not found to link to installation instructions)
- #89113 (dont `.ensure()` the `thir_abstract_const` query call in `mir_build`)
- #89114 (Fixes a technicality regarding the size of C's `char` type)
- #89115 (⬆️ rust-analyzer)
- #89126 (Fix ICE when `indirect_structural_match` is allowed)
- #89141 (Impl `Error` for `FromSecsError` without foreign type)
- #89142 (Fix match for placeholder region)
- #89147 (add case for checking const refs in check_const_value_eq)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Migrate in-tree crates to 2021
This replaces #89075 (cherry picking some of the commits from there), and closes#88637 and fixes#89074.
It excludes a migration of the library crates for now (see tidy diff) because we have some pending bugs around macro spans to fix there.
I instrumented bootstrap during the migration to make sure all crates moved from 2018 to 2021 had the compatibility warnings applied first.
Originally, the intent was to support cargo fix --edition within bootstrap, but this proved fairly difficult to pull off. We'd need to architect the check functionality to support running cargo check and cargo fix within the same x.py invocation, and only resetting sysroots on check. Further, it was found that cargo fix doesn't behave too well with "not quite workspaces", such as Clippy which has several crates. Bootstrap runs with --manifest-path ... for all the tools, and this makes cargo fix only attempt migration for that crate. We can't use e.g. --workspace due to needing to maintain sysroots for different phases of compilation appropriately.
It is recommended to skip the mass migration of Cargo.toml's to 2021 for review purposes; you can also use `git diff d6cd2c6c87 -I'^edition = .20...$'` to ignore the edition = 2018/21 lines in the diff.
Rework DepthFirstSearch API
This expands the API to be more flexible, allowing for more visitation patterns
on graphs. This will be useful to avoid extra datasets (and allocations) in
cases where the expanded DFS API is sufficient.
This also fixes a bug with the previous DFS constructor, which left the start
node not marked as visited (even though it was immediately returned).
Commit written by ```@nikomatsakis``` originally, cherry picked from several commits in work on never type stabilization, but stands alone.
This expands the API to be more flexible, allowing for more visitation patterns
on graphs. This will be useful to avoid extra datasets (and allocations) in
cases where the expanded DFS API is sufficient.
This also fixes a bug with the previous DFS constructor, which left the start
node not marked as visited (even though it was immediately returned).
Remove SmallVector mention
SmallVector is long gone, as it's been first replaced
by OneVector in commit e5e6375352,
which then has been removed entirely in favour of SmallVec in
commit 130a32fa72.
SmallVector is long gone, as it's been first replaced
by OneVector in commit e5e6375352,
which then has been removed entirely in favour of SmallVec in
commit 130a32fa72.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Make mir borrowck's use of opaque types independent of the typeck query's result
fixes#87218fixes#86465
we used to use the typeck results only to generate an obligation for the mir borrowck type to be equal to the typeck result.
When i removed the `fixup_opaque_types` function in #87200, I exposed a bug that showed that mir borrowck can't doesn't get enough information from typeck in order to build the correct lifetime mapping from opaque type usage to the actual concrete type. We therefor now fully compute the information within mir borrowck (we already did that, but we only used it to verify the typeck result) and stop using the typeck information.
We will likely be able to remove most opaque type information from the borrowck results in the future and just have all current callers use the mir borrowck result instead.
r? `@spastorino`
Profile incremental compilation hashing fingerprints
Adds profiling instrumentation for the hashing of incremental compilation fingerprints per query.
This will eventually feed into the `measureme` and `rustc-perf` infrastructure for tracking if computing hashes changes over time.
TODOs:
* [x] Address the FIXME where we are including node interning in the hash timing.
* [ ] Update measureme/summarize to handle this new data: https://github.com/rust-lang/measureme/pull/166
* [ ] ~Update rustc-perf to handle the new data from measureme~ (will be done at a later time)
r? `@ghost`
cc `@michaelwoerister`
rustc_data_structures has a dependency on crossbeam-utils but never uses
it. It appears to have originally had this dependency in order to set
the "nightly" feature; however, its other dependencies use a different
version of crossbeam-utils, so this doesn't actually affect anything.
Furthermore, in current crossbeam-utils, the "nightly" feature has
become a no-op.
Don't use a generator for BoxedResolver
The generator is non-trivial and requires unsafe code anyway. Using regular unsafe code without a generator is much easier to follow.
Based on #85810 as it touches rustc_interface too.
Remove unused feature gates
The first commit removes a usage of a feature gate, but I don't expect it to be controversial as the feature gate was only used to workaround a limitation of rust in the past. (closures never being `Clone`)
The second commit uses `#[allow_internal_unstable]` to avoid leaking the `trusted_step` feature gate usage from inside the index newtype macro. It didn't work for the `min_specialization` feature gate though.
The third commit removes (almost) all feature gates from the compiler that weren't used anyway.
don't enable parking_lot nightly features
Having the compiler itself depend on external libraries that use nightly features can lead to "fun" bootstrap situations. Within the rustc repo we use `cfg(bootstrap)` to resolve those, but that is not a reasonable option for external dependencies.
So I propose we stop enabling the "nightly" feature of `parking_lot` here. In my experiments, this then indeed leads to the feature not being enabled (i.e., nothing else enables it), and everything still builds. However, this means parking_lot's `RwLock` will no longer have hardware lock elision for readers -- I hope that is okay to lose in exchange for less bootstrap brain twisting. ;)
Cc `@Amanieu`
With the arrival of min const generics, many alt-vec libraries have
updated to use it in some way and arrayvec is no exception. Use the
latest with minor refactoring.
Also, rustc_workspace_hack is the only user of smallvec 0.6 in the
entire tree, so drop it.
Add `FromIterator` and `IntoIterator` impls for `ThinVec`
These should make using `ThinVec` feel much more like using `Vec`.
They will allow users of `Vec` to switch to `ThinVec` while continuing
to use `collect()`, `for` loops, and other parts of the iterator API.
I don't know if there were use cases before for using the iterator API
with `ThinVec`, but I would like to start using `ThinVec` in rustdoc,
and having it conform to the iterator API would make the transition
*a lot* easier.
I added a `FromIterator` impl, an `IntoIterator` impl that yields owned
elements, and `IntoIterator` impls that yield immutable or mutable
references to elements. I also added some unit tests for `ThinVec`.
These should make using `ThinVec` feel much more like using `Vec`.
They will allow users of `Vec` to switch to `ThinVec` while continuing
to use `collect()`, `for` loops, and other parts of the iterator API.
I don't know if there were use cases before for using the iterator API
with `ThinVec`, but I would like to start using `ThinVec` in rustdoc,
and having it conform to the iterator API would make the transition
*a lot* easier.
I added a `FromIterator` impl, an `IntoIterator` impl that yields owned
elements, and `IntoIterator` impls that yield immutable or mutable
references to elements. I also added some unit tests for `ThinVec`.
Add an Mmap wrapper to rustc_data_structures
This wrapper implements StableAddress and falls back to directly reading the file on wasm32.
Taken from #83640, which I will close due to the perf regression.
There isn't currently a good reviewer for these, and I don't want to
remove things that will just be added again. I plan to make a separate
PR for these changes so the rest of the cleanup can land.
- Add back `HirIdVec`, with a comment that it will soon be used.
- Add back `*_region` functions, with a comment they may soon be used.
- Remove `-Z borrowck_stats` completely. It didn't do anything.
- Remove `make_nop` completely.
- Add back `current_loc`, which is used by an out-of-tree tool.
- Fix style nits
- Remove `AtomicCell` with `cfg(parallel_compiler)` for consistency.
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
Allow for reading raw bytes from rustc_serialize::Decoder without unsafe code
The current `read_raw_bytes` method requires using `MaybeUninit` and `unsafe`. I don't think this is necessary. Let's see if a safe interface has any performance drawbacks.
This is a followup to #83273 and will make it easier to rebase #82183.
r? `@cjgillot`
Update to rustc-rayon 0.3.1
This pulls in rust-lang/rustc-rayon#8 to fix#81425. (h/t `@ammaraskar)`
That revealed weak constraints on `rustc_arena::DropArena`, because its
`DropType` was holding type-erased raw pointers to generic `T`. We can
implement `Send` for `DropType` (under `cfg(parallel_compiler)`) by
requiring all `T: Send` before they're type-erased.
This pulls in rust-lang/rustc-rayon#8 to fix#81425. (h/t @ammaraskar)
That revealed weak constraints on `rustc_arena::DropArena`, because its
`DropType` was holding type-erased raw pointers to generic `T`. We can
implement `Send` for `DropType` (under `cfg(parallel_compiler)`) by
requiring all `T: Send` before they're type-erased.
