Improve SIMD casts
* Allows `simd_cast` intrinsic to take `usize` and `isize`
* Adds `simd_as` intrinsic, which is the same as `simd_cast` except for saturating float-to-int conversions (matching the behavior of `as`).
cc `@workingjubilee`
Avoid unnecessary monomorphization of inline asm related functions
This should reduce build time for codegen backends by avoiding duplicated monomorphization of certain inline asm related functions for each passed in closure type.
Implement `#[rustc_must_implement_one_of]` attribute
This PR adds a new attribute — `#[rustc_must_implement_one_of]` that allows changing the "minimal complete definition" of a trait. It's similar to GHC's minimal `{-# MINIMAL #-}` pragma, though `#[rustc_must_implement_one_of]` is weaker atm.
Such attribute was long wanted. It can be, for example, used in `Read` trait to make transitions to recently added `read_buf` easier:
```rust
#[rustc_must_implement_one_of(read, read_buf)]
pub trait Read {
fn read(&mut self, buf: &mut [u8]) -> Result<usize> {
let mut buf = ReadBuf::new(buf);
self.read_buf(&mut buf)?;
Ok(buf.filled_len())
}
fn read_buf(&mut self, buf: &mut ReadBuf<'_>) -> Result<()> {
default_read_buf(|b| self.read(b), buf)
}
}
impl Read for Ty0 {}
//^ This will fail to compile even though all `Read` methods have default implementations
// Both of these will compile just fine
impl Read for Ty1 {
fn read(&mut self, buf: &mut [u8]) -> Result<usize> { /* ... */ }
}
impl Read for Ty2 {
fn read_buf(&mut self, buf: &mut ReadBuf<'_>) -> Result<()> { /* ... */ }
}
```
For now, this is implemented as an internal attribute to start experimenting on the design of this feature. In the future we may want to extend it:
- Allow arbitrary requirements like `a | (b & c)`
- Allow multiple requirements like
- ```rust
#[rustc_must_implement_one_of(a, b)]
#[rustc_must_implement_one_of(c, d)]
```
- Make it appear in rustdoc documentation
- Change the syntax?
- Etc
Eventually, we should make an RFC and make this (or rather similar) attribute public.
---
I'm fairly new to compiler development and not at all sure if the implementation makes sense, but at least it passes tests :)
Remove deprecated LLVM-style inline assembly
The `llvm_asm!` was deprecated back in #87590 1.56.0, with intention to remove
it once `asm!` was stabilized, which already happened in #91728 1.59.0. Now it
is time to remove `llvm_asm!` to avoid continued maintenance cost.
Closes#70173.
Closes#92794.
Closes#87612.
Closes#82065.
cc `@rust-lang/wg-inline-asm`
r? `@Amanieu`
Add diagnostic items for macros
For use in Clippy, it adds diagnostic items to all the stable public macros
Clippy has lints that look for almost all of these (currently by name or path), but there are a few that aren't currently part of any lint, I could remove those if it's preferred to add them as needed rather than ahead of time
Currently, you can use `#[rustc_clean]` to assert to that a particular
query (technically, a `DepNode`) is green or red. However, a green
`DepNode` does not mean that the query result was actually deserialized
from disk - we might have never re-run a query that needed the result.
Some incremental tests are written as regression tests for ICEs that
occured during query result decoding. Using
`#[rustc_clean(loaded_from_disk="typeck")]`, you can now assert
that the result of a particular query (e.g. `typeck`) was actually
loaded from disk, in addition to being green.
By changing `as_str()` to take `&self` instead of `self`, we can just
return `&str`. We're still lying about lifetimes, but it's a smaller lie
than before, where `SymbolStr` contained a (fake) `&'static str`!
Rollup of 6 pull requests
Successful merges:
- #87599 (Implement concat_bytes!)
- #89999 (Update std::env::temp_dir to use GetTempPath2 on Windows when available.)
- #90796 (Remove the reg_thumb register class for asm! on ARM)
- #91042 (Use Vec extend instead of repeated pushes on several places)
- #91634 (Do not attempt to suggest help for overly malformed struct/function call)
- #91685 (Install llvm tools to sysroot when assembling local toolchain)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Remove the reg_thumb register class for asm! on ARM
Also restricts r8-r14 from being used on Thumb1 targets as per #90736.
cc ``@Lokathor``
r? ``@joshtriplett``
Implement concat_bytes!
This implements the unstable `concat_bytes!` macro, which has tracking issue #87555. It can be used like:
```rust
#![feature(concat_bytes)]
fn main() {
assert_eq!(concat_bytes!(), &[]);
assert_eq!(concat_bytes!(b'A', b"BC", [68, b'E', 70]), b"ABCDEF");
}
```
If strings or characters are used where byte strings or byte characters are required, it suggests adding a `b` prefix. If a number is used outside of an array it suggests arrayifying it. If a boolean is used it suggests replacing it with the numeric value of that number. Doubly nested arrays of bytes are disallowed.
Support AVR for inline asm!
A first pass at support for the AVR platform in inline `asm!`. Passes the initial compiler tests, have not yet done more complete verification.
In particular, the register classes could use a lot more fleshing out, this draft PR so far only includes the most basic.
cc `@Amanieu` `@dylanmckay`
Reintroduce `into_future` in `.await` desugaring
This is a reintroduction of the remaining parts from https://github.com/rust-lang/rust/pull/65244 that have not been relanded yet.
This isn't quite ready to merge yet. The last attempt was reverting due to performance regressions, so we need to make sure this does not introduce those issues again.
Issues #67644, #67982
/cc `@yoshuawuyts`
Print associated types on opaque `impl Trait` types
This PR generalizes #91021, printing associated types for all opaque `impl Trait` types instead of just special-casing for future.
before:
```
error[E0271]: type mismatch resolving `<impl Iterator as Iterator>::Item == u32`
```
after:
```
error[E0271]: type mismatch resolving `<impl Iterator<Item = usize> as Iterator>::Item == u32`
```
---
Questions:
1. I'm kinda lost in binders hell with this one. Is all of the `rebind`ing necessary?
2. Is there a map collection type that will give me a stable iteration order? Doesn't seem like TraitRef is Ord, so I can't just sort later..
3. I removed the logic that suppresses printing generator projection types. It creates outputs like this [gist](https://gist.github.com/compiler-errors/d6f12fb30079feb1ad1d5f1ab39a3a8d). Should I put that back?
4. I also added spaces between traits, `impl A+B` -> `impl A + B`. I quite like this change, but is there a good reason to keep it like that?
r? ````@estebank````
Split inline const to two feature gates and mark expression position inline const complete
This PR splits inline const in pattern position into its own `#![feature(inline_const_pat)]` feature gate, and make the usage in expression position complete.
I think I have resolved most outstanding issues related to `inline_const` with #89561 and other PRs. The only thing left that I am aware of is #90150 and the lack of lifetime checks when inline const is used in pattern position (FIXME in #89561). Implementation-wise when used in pattern position it has to be lowered during MIR building while in expression position it's evaluated only when monomorphizing (just like normal consts), so it makes some sense to separate it into two feature gates so one can progress without being blocked by another.
``@rustbot`` label: T-compiler F-inline_const
Suggestion to wrap inner types using 'allocator_api' in tuple
This PR provides a suggestion to wrap the inner types in tuple when being along with 'allocator_api'.
Closes https://github.com/rust-lang/rust/issues/83250
```rust
fn main() {
let _vec: Vec<u8, _> = vec![]; //~ ERROR use of unstable library feature 'allocator_api'
}
```
```diff
error[E0658]: use of unstable library feature 'allocator_api'
--> $DIR/suggest-vec-allocator-api.rs:2:23
|
LL | let _vec: Vec<u8, _> = vec![];
- | ^
+ | ----^
+ | |
+ | help: consider wrapping the inner types in tuple: `(u8, _)`
|
= note: see issue #32838 <https://github.com/rust-lang/rust/issues/32838> for more information
= help: add `#![feature(allocator_api)]` to the crate attributes to enable
```
This function parameter attribute was introduced in https://github.com/rust-lang/rust/pull/44866 as an intermediate step in implementing `impl Trait`, it's not necessary or used anywhere by itself.
Don't destructure args tuple in format_args!
This allows Clippy to parse the HIR more simply since `arg0` is changed to `_args.0`. (cc rust-lang/rust-clippy#7843). From rustc's perspective, I think this is something between a lateral move and a tiny improvement since there are fewer bindings.
r? `@m-ou-se`
Add features gates for experimental asm features
This PR splits off parts of `asm!` into separate features because they are not ready for stabilization.
Specifically this adds:
- `asm_const` for `const` operands.
- `asm_sym` for `sym` operands.
- `asm_experimental_arch` for architectures other than x86, x86_64, arm, aarch64 and riscv.
r? `@nagisa`
