Don't output incremental test artifacts into working directory
Currently tests can ICE when the test spits out `inc-fat` incremental artifacts directly into the top of the git checkout, and then the compiler version changes, and it reads nonsense incremental artifacts on a subsequent test run.
r? `@oli-obk`
cc `@Oneirical,` I think you added this -- I think the right flag to add when porting `-Cincremental` run-make tests is to use `//@ incremental` rather than manually specifying the `-Cincremental` rustflag.
Explain why we require `_` for empty patterns
This adds a note to the "non-exhaustive patterns" diagnostic to explain why we sometimes require extra `_` patterns on empty types. This is one of the two diagnostic improvements I wanted to do before [stabilizing `min_exhaustive_patterns`](https://github.com/rust-lang/rust/pull/122792).
r? ``@compiler-errors``
Just totally fully deny late-bound consts
Kinda don't care about supporting this until we have where clauses on binders. They're super busted and should be reworked in due time, and they are approximately 100% useless until then 😸Fixes#127970Fixes#127009
r? ``@BoxyUwU``
Remove unnecessary impl sorting in queries and metadata
Removes unnecessary impl sorting because queries already return their keys in HIR definition order: https://github.com/rust-lang/rust/issues/120371#issuecomment-1926422838
r? `@cjgillot` or `@lcnr` -- unless I totally misunderstood what was being asked for here? 😆fixes#120371
Forbid borrows and unsized types from being used as the type of a const generic under `adt_const_params`
Fixes#112219Fixes#112124Fixes#112125
### Motivation
Currently the `adt_const_params` feature allows writing `Foo<const N: [u8]>` this is entirely useless as it is not possible to write an expression which evaluates to a type that is not `Sized`. In order to actually use unsized types in const generics they are typically written as `const N: &[u8]` which *is* possible to provide a value of.
Unfortunately allowing the types of const parameters to contain references is non trivial (#120961) as it introduces a number of difficult questions about how equality of references in the type system should behave. References in the types of const generics is largely only useful for using unsized types in const generics.
This PR introduces a new feature gate `unsized_const_parameters` and moves support for `const N: [u8]` and `const N: &...` from `adt_const_params` into it. The goal here hopefully is to experiment with allowing `const N: [u8]` to work without references and then eventually completely forbid references in const generics.
Splitting this out into a new feature gate means that stabilization of `adt_const_params` does not have to resolve#120961 which is the only remaining "big" blocker for the feature. Remaining issues after this are a few ICEs and naming bikeshed for `ConstParamTy`.
### Implementation
The implementation is slightly subtle here as we would like to ensure that a stabilization of `adt_const_params` is forwards compatible with any outcome of `unsized_const_parameters`. This is inherently tricky as we do not support unstable trait implementations and we determine whether a type is valid as the type of a const parameter via a trait bound.
There are a few constraints here:
- We would like to *allow for the possibility* of adding a `Sized` supertrait to `ConstParamTy` in the event that we wind up opting to not support unsized types and instead requiring people to write the 'sized version', e.g. `const N: [u8; M]` instead of `const N: [u8]`.
- Crates should be able to enable `unsized_const_parameters` and write trait implementations of `ConstParamTy` for `!Sized` types without downstream crates that only enable `adt_const_params` being able to observe this (required for std to be able to `impl<T> ConstParamTy for [T]`
Ultimately the way this is accomplished is via having two traits (sad), `ConstParamTy` and `UnsizedConstParamTy`. Depending on whether `unsized_const_parameters` is enabled or not we change which trait is used to check whether a type is allowed to be a const parameter.
Long term (when stabilizing `UnsizedConstParamTy`) it should be possible to completely merge these traits (and derive macros), only having a single `trait ConstParamTy` and `macro ConstParamTy`.
Under `adt_const_params` it is now illegal to directly refer to `ConstParamTy` it is only used as an internal impl detail by `derive(ConstParamTy)` and checking const parameters are well formed. This is necessary in order to ensure forwards compatibility with all possible future directions for `feature(unsized_const_parameters)`.
Generally the intuition here should be that `ConstParamTy` is the stable trait that everything uses, and `UnsizedConstParamTy` is that plus unstable implementations (well, I suppose `ConstParamTy` isn't stable yet :P).
reenable some windows tests
Locally passing on `x86_64-pc-windows-msvc`, fingers crossed for `*-pc-windows-gnu`.
try-job: x86_64-msvc
try-job: x86_64-mingw
Migrate 9 more very similar FFI `run-make` tests to rmake
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
For the tracking issue:
- return-non-c-like-enum-from-c
- pass-non-c-like-enum-to-c
- c-static-dylib
- c-static-rlib
- extern-fn-generic
- extern-fn-with-union
- lto-no-link-whole-rlib
- linkage-attr-on-static
- issue-28595
Ignore allocation bytes in one more mir-opt test
Following on PR #126502, add `rustc -Zdump-mir-exclude-alloc-bytes` to tests/mir-opt/dataflow-const-prop/aggregate_copy.rs as well to skip writing allocation bytes in MIR dumps.
Fixes#126261
Rollup of 9 pull requests
Successful merges:
- #123196 (Add Process support for UEFI)
- #127556 (Replace a long inline "autoref" comment with method docs)
- #127693 (Migrate `crate-hash-rustc-version` to `rmake`)
- #127866 (Conditionally build `wasm-component-ld` )
- #127918 (Safely enforce thread name requirements)
- #127948 (fixes panic error `index out of bounds` in conflicting error)
- #127980 (Avoid ref when using format! in compiler)
- #127984 (Avoid ref when using format! in src)
- #127987 (More accurate suggestion for `-> Box<dyn Trait>` or `-> impl Trait`)
r? `@ghost`
`@rustbot` modify labels: rollup
Add a test for #107975
The int is zero. But also not zero. This is so much fun.
This is a part of #105107.
Initially I was going to just rebase #108445, but quite a few things changed since then:
* The [mcve](https://github.com/rust-lang/rust/issues/105787#issuecomment-1750112388) used for #105787 got fixed.[^upd2]
* You can't just `a ?= b` for #107975 anymore. Now you have to `a-b ?= 0`. This is what this PR does. As an additional flex, it show that three ways of converting a pointer to its address have this issue:
1. `as usize`
2. `.expose_provenance()`
3. `.addr()`
* #108425 simply got fixed. Yay.
As an aside, the naming for `addr_of!` is quite unfortunate in context of provenance APIs. Because `addr_of!` gives you a pointer, but what provenance APIs refer to as "address" is the `usize` value. Oh well.
UPD1: GitHub is incapable of parsing #107975 in the PR name, so let's add it here.
[^upd2]: UPD2: [The other mcve](https://github.com/rust-lang/rust/issues/105787#issue-1500501670) does not work anymore either, saying "this behavior recently changed as a result of a bug fix; see rust-lang/rust#56105 for details."
More accurate suggestion for `-> Box<dyn Trait>` or `-> impl Trait`
When encountering `-> Trait`, suggest `-> Box<dyn Trait>` (instead of `-> Box<Trait>`.
If there's a single returned type within the `fn`, suggest `-> impl Trait`.
Update jsondocck directives to follow ui_test-style
Context: Comment chain in #125813.
Follow-up to #126788.
Use the same temporary approach of "double parsing" until we figure out how we want to support compiletest/ui_test directive "add-ons" for child test runners like HtmlDocCk and JsonDocCk.
I didn't touch much of jsondocck because I want to refactor it some other time (for robustness, maintainability and better diagnostics; basically by following a similar design of my WIP HtmlDocCk-next, cc #125780).
r? `@GuillaumeGomez`
When encountering `-> Trait`, suggest `-> Box<dyn Trait>` (instead of `-> Box<Trait>`.
If there's a single returned type within the `fn`, suggest `-> impl Trait`.
Rollup of 6 pull requests
Successful merges:
- #127295 (CFI: Support provided methods on traits)
- #127814 (`C-cmse-nonsecure-call`: improved error messages)
- #127949 (fix: explain E0120 better cover cases when its raised)
- #127966 (Use structured suggestions for unconstrained generic parameters on impl blocks)
- #127976 (Lazy type aliases: Diagostics: Detect bivariant ty params that are only used recursively)
- #127978 (Avoid ref when using format! for perf)
r? `@ghost`
`@rustbot` modify labels: rollup
Lazy type aliases: Diagostics: Detect bivariant ty params that are only used recursively
Follow-up to errs's #127871. Extends the logic to cover LTAs, too, not just ADTs.
This change only takes effect with the next-gen solver enabled as cycle errors like
the one we have here are fatal in the old solver. That's my explanation anyways.
r? compiler-errors
`C-cmse-nonsecure-call`: improved error messages
tracking issue: #81391
issue for the error messages (partially implemented by this PR): #81347
related, in that it also deals with CMSE: https://github.com/rust-lang/rust/pull/127766
When using the `C-cmse-nonsecure-call` ABI, both the arguments and return value must be passed via registers. Previously, when violating this constraint, an ugly LLVM error would be shown. Now, the rust compiler itself will print a pretty message and link to more information.
CFI: Support provided methods on traits
Provided methods currently don't get type erasure performed on them because they are not in an `impl` block. If we are instantiating a method that is an associated item, but *not* in an impl block, treat it as a provided method instead.
Disable run-make/split-debuginfo test for RISC-V 64
Together with `@Hoverbear,` we've been improving the state of the riscv64gc-unknown-linux-gnu target.
This is in relation to https://github.com/rust-lang/rust/pull/125220 where `tests/ui/debuginfo/debuginfo-emit-llvm-ir-and-split-debuginfo.rs` was disabled for RISC-V 64 in that another test, `tests/run-make/split-debuginfo` also needs to be disabled due to https://github.com/llvm/llvm-project/issues/56642 and the changes made in https://github.com/rust-lang/rust/pull/120518.
This test appears to be a host test, not a target test, so it isn't seen failing in https://github.com/rust-lang/rust/pull/126641, however, we are in the process of testing host tools for riscv64-gc-unknown-linux-gnu so this test has now been noticed to be a problem.
interpret: add sanity check in dyn upcast to double-check what codegen does
For dyn receiver calls, we already have two codepaths: look up the function to call by indexing into the vtable, or alternatively resolve the DefId given the dynamic type of the receiver. With debug assertions enabled, the interpreter does both and compares the results. (Without debug assertions we always use the vtable as it is simpler.)
This PR does the same for dyn trait upcasts. However, for casts *not* using the vtable is the easier thing to do, so now the vtable path is the debug-assertion-only path. In particular, there are cases where the vtable does not contain a pointer for upcasts but instead reuses the old pointer: when the supertrait vtable is a prefix of the larger vtable. We don't want to expose this optimization and detect UB if people do a transmute assuming this optimization, so we cannot in general use the vtable indexing path.
r? ``@oli-obk``
Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. It is scalable from 8-bit to 64-bit microcontroller environments. The primary governing standards in NuttX are POSIX and ANSI standards.
NuttX adopts additional standard APIs from Unix and other common RTOSs, such as VxWorks. These APIs are used for functionality not available under the POSIX and ANSI standards. However, some APIs, like fork(), are not appropriate for deeply-embedded environments and are not implemented in NuttX.
For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.
I'll be adding libstd support for NuttX in the future, but for now I'll just add the targets.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target
> maintainers") on record to be CCed when issues arise regarding the target.
> (The mechanism to track and CC such developers may evolve over time.)
I will be the target maintainer for this target on matters that pertain to the NuttX part of the triple.
For matters pertaining to the riscv or arm part of the triple, there should be no difference from all other targets. If there are issues, I will address issues regarding the target.
> Targets must use naming consistent with any existing targets; for instance, a
> target for the same CPU or OS as an existing Rust target should use the same
> name for that CPU or OS. Targets should normally use the same names and
> naming conventions as used elsewhere in the broader ecosystem beyond Rust
> (such as in other toolchains), unless they have a very good reason to
> diverge. Changing the name of a target can be highly disruptive, especially
> once the target reaches a higher tier, so getting the name right is important
> even for a tier 3 target.
This is a new supported OS, so I have taken the origin target like `riscv32imac-unknown-none-elf` or `thumbv7m-none-eabi`
and changed the `os` section to `nuttx`.
> Target names should not introduce undue confusion or ambiguity unless
> absolutely necessary to maintain ecosystem compatibility. For example, if
> the name of the target makes people extremely likely to form incorrect
> beliefs about what it targets, the name should be changed or augmented to
> disambiguate it.
I feel that the target name does not introduce any ambiguity.
> Tier 3 targets may have unusual requirements to build or use, but must not
> create legal issues or impose onerous legal terms for the Rust project or for
> Rust developers or users.
The only unusual requirement for building the compiler-builtins crate is a standard RISC-V or ARM C compiler supported by cc-rs, and using this target does not require any additional software beyond what is shipped by rustup.
> The target must not introduce license incompatibilities.
All of the additional code will use Apache-2.0.
> Anything added to the Rust repository must be under the standard Rust
> license (`MIT OR Apache-2.0`).
Agreed, and there is no problem here.
> The target must not cause the Rust tools or libraries built for any other
> host (even when supporting cross-compilation to the target) to depend
> on any new dependency less permissive than the Rust licensing policy. This
> applies whether the dependency is a Rust crate that would require adding
> new license exceptions (as specified by the `tidy` tool in the
> rust-lang/rust repository), or whether the dependency is a native library
> or binary. In other words, the introduction of the target must not cause a
> user installing or running a version of Rust or the Rust tools to be
> subject to any new license requirements.
No new dependencies are added.
> Compiling, linking, and emitting functional binaries, libraries, or other
> code for the target (whether hosted on the target itself or cross-compiling
> from another target) must not depend on proprietary (non-FOSS) libraries.
> Host tools built for the target itself may depend on the ordinary runtime
> libraries supplied by the platform and commonly used by other applications
> built for the target, but those libraries must not be required for code
> generation for the target; cross-compilation to the target must not require
> such libraries at all. For instance, `rustc` built for the target may
> depend on a common proprietary C runtime library or console output library,
> but must not depend on a proprietary code generation library or code
> optimization library. Rust's license permits such combinations, but the
> Rust project has no interest in maintaining such combinations within the
> scope of Rust itself, even at tier 3.
Linking is performed by rust-lld
> "onerous" here is an intentionally subjective term. At a minimum, "onerous"
> legal/licensing terms include but are *not* limited to: non-disclosure
> requirements, non-compete requirements, contributor license agreements
> (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms,
> requirements conditional on the employer or employment of any particular
> Rust developers, revocable terms, any requirements that create liability
> for the Rust project or its developers or users, or any requirements that
> adversely affect the livelihood or prospects of the Rust project or its
> developers or users.
There are no terms. NuttX is distributed under the Apache 2.0 license.
> Neither this policy nor any decisions made regarding targets shall create any
> binding agreement or estoppel by any party. If any member of an approving
> Rust team serves as one of the maintainers of a target, or has any legal or
> employment requirement (explicit or implicit) that might affect their
> decisions regarding a target, they must recuse themselves from any approval
> decisions regarding the target's tier status, though they may otherwise
> participate in discussions.
I'm not the reviewer here.
> This requirement does not prevent part or all of this policy from being
> cited in an explicit contract or work agreement (e.g. to implement or
> maintain support for a target). This requirement exists to ensure that a
> developer or team responsible for reviewing and approving a target does not
> face any legal threats or obligations that would prevent them from freely
> exercising their judgment in such approval, even if such judgment involves
> subjective matters or goes beyond the letter of these requirements.
Again I'm not the reviewer here.
> Tier 3 targets should attempt to implement as much of the standard libraries
> as possible and appropriate (`core` for most targets, `alloc` for targets
> that can support dynamic memory allocation, `std` for targets with an
> operating system or equivalent layer of system-provided functionality), but
> may leave some code unimplemented (either unavailable or stubbed out as
> appropriate), whether because the target makes it impossible to implement or
> challenging to implement. The authors of pull requests are not obligated to
> avoid calling any portions of the standard library on the basis of a tier 3
> target not implementing those portions.
> The target must provide documentation for the Rust community explaining how
> to build for the target, using cross-compilation if possible. If the target
> supports running binaries, or running tests (even if they do not pass), the
> documentation must explain how to run such binaries or tests for the target,
> using emulation if possible or dedicated hardware if necessary.
Building is described in platform support doc, but libstd is not supported now,
I'll implement it later.
> Tier 3 targets must not impose burden on the authors of pull requests, or
> other developers in the community, to maintain the target. In particular,
> do not post comments (automated or manual) on a PR that derail or suggest a
> block on the PR based on a tier 3 target. Do not send automated messages or
> notifications (via any medium, including via `@`) to a PR author or others
> involved with a PR regarding a tier 3 target, unless they have opted into
> such messages.
Understood.
> Backlinks such as those generated by the issue/PR tracker when linking to
> an issue or PR are not considered a violation of this policy, within
> reason. However, such messages (even on a separate repository) must not
> generate notifications to anyone involved with a PR who has not requested
> such notifications.
Understood.
> Patches adding or updating tier 3 targets must not break any existing tier 2
> or tier 1 target, and must not knowingly break another tier 3 target without
> approval of either the compiler team or the maintainers of the other tier 3
> target.
I believe I didn't break any other target.
> In particular, this may come up when working on closely related targets,
> such as variations of the same architecture with different features. Avoid
> introducing unconditional uses of features that another variation of the
> target may not have; use conditional compilation or runtime detection, as
> appropriate, to let each target run code supported by that target.
I think there are no such problems in this PR.
> Tier 3 targets must be able to produce assembly using at least one of
> rustc's supported backends from any host target. (Having support in a fork
> of the backend is not sufficient, it must be upstream.)
Yes, it use standard RISCV or ARM backend to generate assembly.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Rollup of 7 pull requests
Successful merges:
- #121533 (Handle .init_array link_section specially on wasm)
- #127825 (Migrate `macos-fat-archive`, `manual-link` and `archive-duplicate-names` `run-make` tests to rmake)
- #127891 (Tweak suggestions when using incorrect type of enum literal)
- #127902 (`collect_tokens_trailing_token` cleanups)
- #127928 (Migrate `lto-smoke-c` and `link-path-order` `run-make` tests to rmake)
- #127935 (Change `binary_asm_labels` to only fire on x86 and x86_64)
- #127953 ([compiletest] Search *.a when getting dynamic libraries on AIX)
r? `@ghost`
`@rustbot` modify labels: rollup
Don't allow unsafe statics outside of extern blocks
This PR fixes a regression where we allowed `unsafe static` items in top-level modules (i.e. outside of `unsafe extern` blocks).
It's harder IMO to integrate this into the `check_item_safety` function, so I opted to just put this check on the `static` item itself.
Beta version of this lives at #127944.
r? ```@oli-obk``` or ```@spastorino```
When finding item gated behind a `cfg` flag, point at it
Previously we would only mention that the item was gated out, and opportunisitically mention the feature flag name when possible. We now point to the place where the item was gated, which can be behind layers of macro indirection, or in different modules.
```
error[E0433]: failed to resolve: could not find `doesnt_exist` in `inner`
--> $DIR/diagnostics-cross-crate.rs:18:23
|
LL | cfged_out::inner::doesnt_exist::hello();
| ^^^^^^^^^^^^ could not find `doesnt_exist` in `inner`
|
note: found an item that was configured out
--> $DIR/auxiliary/cfged_out.rs:6:13
|
LL | pub mod doesnt_exist {
| ^^^^^^^^^^^^
note: the item is gated here
--> $DIR/auxiliary/cfged_out.rs:5:5
|
LL | #[cfg(FALSE)]
| ^^^^^^^^^^^^^
```
Represent type-level consts with new-and-improved `hir::ConstArg`
### Summary
This is a step toward `min_generic_const_exprs`. We now represent all const
generic arguments using an enum that differentiates between const *paths*
(temporarily just bare const params) and arbitrary anon consts that may perform
computations. This will enable us to cleanly implement the `min_generic_const_args`
plan of allowing the use of generics in paths used as const args, while
disallowing their use in arbitrary anon consts. Here is a summary of the salient
aspects of this change:
- Add `current_def_id_parent` to `LoweringContext`
This is needed to track anon const parents properly once we implement
`ConstArgKind::Path` (which requires moving anon const def-creation
outside of `DefCollector`).
- Create `hir::ConstArgKind` enum with `Path` and `Anon` variants. Use it in the
existing `hir::ConstArg` struct, replacing the previous `hir::AnonConst` field.
- Use `ConstArg` for all instances of const args. Specifically, use it instead
of `AnonConst` for assoc item constraints, array lengths, and const param
defaults.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at https://github.com/rust-lang/rust/issues/127009.
### Followup items post-merge
- Use `ConstArgKind::Path` for all const paths, not just const params.
- Fix (no github dont close this issue) #127009
- If a path in generic args doesn't resolve as a type, try to resolve as a const
instead (do this in rustc_resolve). Then remove the special-casing from
`rustc_ast_lowering`, so that all params will automatically be lowered as
`ConstArgKind::Path`.
- (?) Consider making `const_evaluatable_unchecked` a hard error, or at least
trying it in crater
r? `@BoxyUwU`
Change `binary_asm_labels` to only fire on x86 and x86_64
In <https://github.com/rust-lang/rust/pull/126922>, the `binary_asm_labels` lint was added which flags labels such as `0:` and `1:`. Before that change, LLVM was giving a confusing error on x86/x86_64 because of an incorrect interpretation.
However, targets other than x86 and x86_64 never had the error message and have not been a problem. This means that the lint was causing code that previously worked to start failing (e.g. `compiler_builtins`), rather than only providing a more clear messages where there has always been an error.
Adjust the lint to only fire on x86 and x86_64 assembly to avoid this regression.
Also update the help message.
Fixes: https://github.com/rust-lang/rust/issues/127821
Tweak suggestions when using incorrect type of enum literal
More accurate suggestions when writing wrong style of enum variant literal:
```
error[E0533]: expected value, found struct variant `E::Empty3`
--> $DIR/empty-struct-braces-expr.rs:18:14
|
LL | let e3 = E::Empty3;
| ^^^^^^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | let e3 = E::Empty3 {};
| ++
```
```
error[E0533]: expected value, found struct variant `E::V`
--> $DIR/struct-literal-variant-in-if.rs:10:13
|
LL | if x == E::V { field } {}
| ^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | if x == (E::V { field }) {}
| + +
```
```
error[E0618]: expected function, found enum variant `Enum::Unit`
--> $DIR/suggestion-highlights.rs:15:5
|
LL | Unit,
| ---- enum variant `Enum::Unit` defined here
...
LL | Enum::Unit();
| ^^^^^^^^^^--
| |
| call expression requires function
|
help: `Enum::Unit` is a unit enum variant, and does not take parentheses to be constructed
|
LL - Enum::Unit();
LL + Enum::Unit;
|
```
```
error[E0599]: no variant or associated item named `tuple` found for enum `Enum` in the current scope
--> $DIR/suggestion-highlights.rs:36:11
|
LL | enum Enum {
| --------- variant or associated item `tuple` not found for this enum
...
LL | Enum::tuple;
| ^^^^^ variant or associated item not found in `Enum`
|
help: there is a variant with a similar name
|
LL | Enum::Tuple(/* i32 */);
| ~~~~~~~~~~~~~~~~;
|
```
Tweak "field not found" suggestion when giving struct literal for tuple struct type:
```
error[E0560]: struct `S` has no field named `x`
--> $DIR/nested-non-tuple-tuple-struct.rs:8:19
|
LL | pub struct S(f32, f32);
| - `S` defined here
...
LL | let _x = (S { x: 1.0, y: 2.0 }, S { x: 3.0, y: 4.0 });
| ^ field does not exist
|
help: `S` is a tuple struct, use the appropriate syntax
|
LL | let _x = (S(/* f32 */, /* f32 */), S { x: 3.0, y: 4.0 });
| ~~~~~~~~~~~~~~~~~~~~~~~
Use more accurate span for `addr_of!` suggestion
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
Mention that type parameters are used recursively on bivariance error
Right now when a type parameter is used recursively, even with indirection (so it has a finite size) we say that the type parameter is unused:
```
struct B<T>(Box<B<T>>);
```
This is confusing, because the type parameter is *used*, it just doesn't have its variance constrained. This PR tweaks that message to mention that it must be used *non-recursively*.
Not sure if we should actually mention "variance" here, but also I'd somewhat prefer we don't keep the power users in the dark w.r.t the real underlying issue, which is that the variance isn't constrained. That technical detail is reserved for a note, though.
cc `@fee1-dead`
Fixes#118976Fixes#26283Fixes#53191Fixes#105740Fixes#110466
Fix ICE in suggestion caused by `⩵` being recovered as `==`
The second suggestion shown here would previously incorrectly assume that the span corresponding to `⩵` was 2 bytes wide composed by 2 1 byte wide chars, so a span pointing at `==` could point only at one of the `=` to remove it. Instead, we now replace the whole thing (as we should have the whole time):
```
error: unknown start of token: \u{2a75}
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: Unicode character '⩵' (Two Consecutive Equals Signs) looks like '==' (Double Equals Sign), but it is not
|
LL | const A: usize == 2;
| ~~
error: unexpected `==`
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: try using `=` instead
|
LL | const A: usize = 2;
| ~
```
Fix#127823.
Fuchsia status code match arm
Adds a match arm for the Fuchsia status code upon a process abort. An additional change moves the Windows status code down into the match arm itself instead of being defined as a constant elsewhere.
r? tmandry
The link pointed to a closed issue. Create a new one and point the link
to it.
Also add a help message to hint what change the user could make.
Fixes: https://github.com/rust-lang/rust/issues/127821
We already point these out quite aggressively, telling people not to use them, but would normally be rendered as nothing. Having them visible will make it easier for people to actually deal with them.
```
error: unicode codepoint changing visible direction of text present in literal
--> $DIR/unicode-control-codepoints.rs:26:22
|
LL | println!("{:?}", '�');
| ^-^
| ||
| |'\u{202e}'
| this literal contains an invisible unicode text flow control codepoint
|
= note: these kind of unicode codepoints change the way text flows on applications that support them, but can cause confusion because they change the order of characters on the screen
= help: if their presence wasn't intentional, you can remove them
help: if you want to keep them but make them visible in your source code, you can escape them
|
LL | println!("{:?}", '\u{202e}');
| ~~~~~~~~
```
vs the previous
```
error: unicode codepoint changing visible direction of text present in literal
--> $DIR/unicode-control-codepoints.rs:26:22
|
LL | println!("{:?}", '');
| ^-
| ||
| |'\u{202e}'
| this literal contains an invisible unicode text flow control codepoint
|
= note: these kind of unicode codepoints change the way text flows on applications that support them, but can cause confusion because they change the order of characters on the screen
= help: if their presence wasn't intentional, you can remove them
help: if you want to keep them but make them visible in your source code, you can escape them
|
LL | println!("{:?}", '\u{202e}');
| ~~~~~~~~
```
No longer track "zero-width" chars in `SourceMap`, read directly from the line when calculating the `display_col` of a `BytePos`. Move `char_width` to `rustc_span` and use it from the emitter.
This change allows the following to properly align in terminals (depending on the font, the replaced control codepoints are rendered as 1 or 2 width, on my terminal they are rendered as 1, on VSCode text they are rendered as 2):
```
error: this file contains an unclosed delimiter
--> $DIR/issue-68629.rs:5:17
|
LL | ␜␟ts␀![{i
| -- unclosed delimiter
| |
| unclosed delimiter
LL | ␀␀ fn rݻoa>rݻm
| ^
```
In <https://github.com/rust-lang/rust/pull/126922>, the
`binary_asm_labels` lint was added which flags labels such as `0:` and
`1:`. Before that change, LLVM was giving a confusing error on
x86/x86_64 because of an incorrect interpretation.
However, targets other than x86 and x86_64 never had the error message
and have not been a problem. This means that the lint was causing code
that previously worked to start failing (e.g. `compiler_builtins`),
rather than only providing a more clear messages where there has always
been an error.
Adjust the lint to only fire on x86 and x86_64 assembly to avoid this
regression.
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
```
error[E0560]: struct `S` has no field named `x`
--> $DIR/nested-non-tuple-tuple-struct.rs:8:19
|
LL | pub struct S(f32, f32);
| - `S` defined here
...
LL | let _x = (S { x: 1.0, y: 2.0 }, S { x: 3.0, y: 4.0 });
| ^ field does not exist
|
help: `S` is a tuple struct, use the appropriate syntax
|
LL | let _x = (S(/* f32 */, /* f32 */), S { x: 3.0, y: 4.0 });
| ~~~~~~~~~~~~~~~~~~~~~~~
```
```
error[E0533]: expected value, found struct variant `E::Empty3`
--> $DIR/empty-struct-braces-expr.rs:18:14
|
LL | let e3 = E::Empty3;
| ^^^^^^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | let e3 = E::Empty3 {};
| ++
```
```
error[E0533]: expected value, found struct variant `E::V`
--> $DIR/struct-literal-variant-in-if.rs:10:13
|
LL | if x == E::V { field } {}
| ^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | if x == (E::V { field }) {}
| + +
```
```
error[E0618]: expected function, found enum variant `Enum::Unit`
--> $DIR/suggestion-highlights.rs:15:5
|
LL | Unit,
| ---- enum variant `Enum::Unit` defined here
...
LL | Enum::Unit();
| ^^^^^^^^^^--
| |
| call expression requires function
|
help: `Enum::Unit` is a unit enum variant, and does not take parentheses to be constructed
|
LL - Enum::Unit();
LL + Enum::Unit;
|
```
```
error[E0599]: no variant or associated item named `tuple` found for enum `Enum` in the current scope
--> $DIR/suggestion-highlights.rs:36:11
|
LL | enum Enum {
| --------- variant or associated item `tuple` not found for this enum
...
LL | Enum::tuple;
| ^^^^^ variant or associated item not found in `Enum`
|
help: there is a variant with a similar name
|
LL | Enum::Tuple(/* i32 */);
| ~~~~~~~~~~~~~~~~;
|
```
The second suggestion shown here would previously incorrectly assume that the span corresponding to `⩵` was 2 bytes wide composed by 2 1 byte wide chars, so a span pointing at `==` could point only at one of the `=` to remove it. Instead, we now replace the whole thing (as we should have the whole time):
```
error: unknown start of token: \u{2a75}
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: Unicode character '⩵' (Two Consecutive Equals Signs) looks like '==' (Double Equals Sign), but it is not
|
LL | const A: usize == 2;
| ~~
error: unexpected `==`
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: try using `=` instead
|
LL | const A: usize = 2;
| ~
```
Use Option's discriminant as its size hint
I was looking at this in MIR after a question on discord, and noticed that it ends up with a switch in MIR (<https://rust.godbolt.org/z/3q4cYnnb3>), which it doesn't need because (as `Option::as_slice` uses) the discriminant is already the length.
make pub_use_of_private_extern_crate show up in cargo's future breakage reports
This has been a lint for many years.
However, turns out that outright removing it right now would lead to [tons of crater regressions](https://github.com/rust-lang/rust/pull/127656#issuecomment-2233288534) due to crates depending on an ancient version of `bitflags`. So for now this PR just makes this future-compat lint show up in cargo's reports, so people are warned when they use a dependency that is affected by this.
r? `@petrochenkov`
Fix ambiguous cases of multiple & in elided self lifetimes
This change proposes simpler rules to identify the lifetime on `self` parameters which may be used to elide a return type lifetime.
## The old rules
(copied from [this comment](https://github.com/rust-lang/rust/pull/117967#discussion_r1420554242))
Most of the code can be found in [late.rs](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html) and acts on AST types. The function [resolve_fn_params](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2006), in the success case, returns a single lifetime which can be used to elide the lifetime of return types.
Here's how:
* If the first parameter is called self then we search that parameter using "`self` search rules", below
* If no unique applicable lifetime was found, search all other parameters using "regular parameter search rules", below
(In practice the code does extra work to assemble good diagnostic information, so it's not quite laid out like the above.)
### `self` search rules
This is primarily handled in [find_lifetime_for_self](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2118) , and is described slightly [here](https://github.com/rust-lang/rust/issues/117715#issuecomment-1813115477) already. The code:
1. Recursively walks the type of the `self` parameter (there's some complexity about resolving various special cases, but it's essentially just walking the type as far as I can see)
2. Each time we find a reference anywhere in the type, if the **direct** referent is `Self` (either spelled `Self` or by some alias resolution which I don't fully understand), then we'll add that to a set of candidate lifetimes
3. If there's exactly one such unique lifetime candidate found, we return this lifetime.
### Regular parameter search rules
1. Find all the lifetimes in each parameter, including implicit, explicit etc.
2. If there's exactly one parameter containing lifetimes, and if that parameter contains exactly one (unique) lifetime, *and if we didn't find a `self` lifetime parameter already*, we'll return this lifetime.
## The new rules
There are no changes to the "regular parameter search rules" or to the overall flow, only to the `self` search rules which are now:
1. Recursively walks the type of the `self` parameter, searching for lifetimes of reference types whose referent **contains** `Self`.[^1]
2. Keep a record of:
* Whether 0, 1 or n unique lifetimes are found on references encountered during the walk
4. If no lifetime was found, we don't return a lifetime. (This means other parameters' lifetimes may be used for return type lifetime elision).
5. If there's one lifetime found, we return the lifetime.
6. If multiple lifetimes were found, we abort elision entirely (other parameters' lifetimes won't be used).
[^1]: this prevents us from considering lifetimes from inside of the self-type
## Examples that were accepted before and will now be rejected
```rust
fn a(self: &Box<&Self>) -> &u32
fn b(self: &Pin<&mut Self>) -> &String
fn c(self: &mut &Self) -> Option<&Self>
fn d(self: &mut &Box<Self>, arg: &usize) -> &usize // previously used the lt from arg
```
### Examples that change the elided lifetime
```rust
fn e(self: &mut Box<Self>, arg: &usize) -> &usize
// ^ new ^ previous
```
## Examples that were rejected before and will now be accepted
```rust
fn f(self: &Box<Self>) -> &u32
```
---
*edit: old PR description:*
```rust
struct Concrete(u32);
impl Concrete {
fn m(self: &Box<Self>) -> &u32 {
&self.0
}
}
```
resulted in a confusing error.
```rust
impl Concrete {
fn n(self: &Box<&Self>) -> &u32 {
&self.0
}
}
```
resulted in no error or warning, despite apparent ambiguity over the elided lifetime.
Fixes https://github.com/rust-lang/rust/issues/117715
Migrate `issue-85401-static-mir`, `missing-crate-dependency` and `unstable-flag-required` `run-make` tests to rmake
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
try-job: armhf-gnu
try-job: test-various
try-job: x86_64-msvc
try-job: aarch64-apple
try-job: dist-x86_64-linux
Const-to-pattern-to-MIR cleanup
Now that all uses of constants without structural equality are hard errors, there's a bunch of cleanup we can do in the code that handles patterns: we can always funnel patterns through valtrees first (rather than having a fallback path for when valtree construction fails), and we can make sure that if we emit a `PartialEq` call it is not calling anything user-defined.
To keep the error messages the same, I made valtree construction failures return the information of *which* type it is that cannot be valtree'd. `search_for_structural_match_violation` is now not needed any more at all, so I removed it.
r? `@oli-obk`
Migrate 8 very similar FFI `run-make` tests to rmake
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
There are some more of these, but while the code is almost always the same, I want to keep the number reasonable so my doc comments can be inspected for potential inaccuracies. Tell me if 8 is too much, I can cut this down.
For the tracking issue:
- issue-25581
- extern-fn-with-extern-types
- extern-fn-struct-passing-abi
- longjmp-across-rust
- static-extern-type
- extern-fn-explicit-align
- extern-fn-with-packed-struct
- extern-fn-mangle
More accurate span for anonymous argument suggestion
Use smaller span for suggesting adding `_:` ahead of a type:
```
error: expected one of `(`, `...`, `..=`, `..`, `::`, `:`, `{`, or `|`, found `)`
--> $DIR/anon-params-denied-2018.rs:12:47
|
LL | fn foo_with_qualified_path(<Bar as T>::Baz);
| ^ expected one of 8 possible tokens
|
= note: anonymous parameters are removed in the 2018 edition (see RFC 1685)
help: explicitly ignore the parameter name
|
LL | fn foo_with_qualified_path(_: <Bar as T>::Baz);
| ++
```
More accurate span for type parameter suggestion
After:
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/impl-block-params-declared-in-wrong-spot-issue-113073.rs:3:10
|
LL | impl Foo<T: Default> for String {}
| ^^^^^^^^^^ associated item constraint not allowed here
|
help: declare the type parameter right after the `impl` keyword
|
LL - impl Foo<T: Default> for String {}
LL + impl<T: Default> Foo<T> for String {}
|
```
Before:
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/impl-block-params-declared-in-wrong-spot-issue-113073.rs:3:10
|
LL | impl Foo<T: Default> for String {}
| ^^^^^^^^^^ associated item constraint not allowed here
|
help: declare the type parameter right after the `impl` keyword
|
LL | impl<T: Default> Foo<T> for String {}
| ++++++++++++ ~
```
Accurate `use` rename suggestion span
When suggesting to rename an import with `as`, use a smaller span to render the suggestion with a better format:
```
error[E0252]: the name `baz` is defined multiple times
--> $DIR/issue-25396.rs:4:5
|
LL | use foo::baz;
| -------- previous import of the module `baz` here
LL | use bar::baz;
| ^^^^^^^^ `baz` reimported here
|
= note: `baz` must be defined only once in the type namespace of this module
help: you can use `as` to change the binding name of the import
|
LL | use bar::baz as other_baz;
| ++++++++++++
```
Fix associated item removal suggestion
We were previously telling people to write what was already there, instead of removal (treating it as a `help`). We now properly suggest to remove the code that needs to be removed.
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/E0229.rs:13:25
|
LL | fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
| ^^^^^^^ associated item constraint not allowed here
|
help: consider removing this associated item binding
|
LL - fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
LL + fn baz<I>(x: &<I as Foo>::A) {}
|
```
Migrate `atomic-lock-free` to `rmake`
Also adds `llvm_components_contain` to `run-make-support`.
Part of #121876.
r? ``@jieyouxu``
try-job: dist-x86_64-linux
Fix precise capturing suggestion for hidden regions when we have APITs
Suggests to turn APITs into type parameters so they can be named in precise capturing syntax for hidden type lifetime errors. We also note that it may change the API.
This is currently done via a note *and* a suggestion, which feels a bit redundant, but I wasn't totally sure of a better alternative for the presentation.
Code is kind of a mess but there's a lot of cases to consider. Happy to iterate on this if you think the approach is too messy.
Based on #127619, only the last commit is relevant.
r? oli-obk
Tracking:
- https://github.com/rust-lang/rust/issues/123432
Use smaller span for suggesting adding `_:` ahead of a type:
```
error: expected one of `(`, `...`, `..=`, `..`, `::`, `:`, `{`, or `|`, found `)`
--> $DIR/anon-params-denied-2018.rs:12:47
|
LL | fn foo_with_qualified_path(<Bar as T>::Baz);
| ^ expected one of 8 possible tokens
|
= note: anonymous parameters are removed in the 2018 edition (see RFC 1685)
help: explicitly ignore the parameter name
|
LL | fn foo_with_qualified_path(_: <Bar as T>::Baz);
| ++
```
After:
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/impl-block-params-declared-in-wrong-spot-issue-113073.rs:3:10
|
LL | impl Foo<T: Default> for String {}
| ^^^^^^^^^^ associated item constraint not allowed here
|
help: declare the type parameter right after the `impl` keyword
|
LL - impl Foo<T: Default> for String {}
LL + impl<T: Default> Foo<T> for String {}
|
```
Before:
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/impl-block-params-declared-in-wrong-spot-issue-113073.rs:3:10
|
LL | impl Foo<T: Default> for String {}
| ^^^^^^^^^^ associated item constraint not allowed here
|
help: declare the type parameter right after the `impl` keyword
|
LL | impl<T: Default> Foo<T> for String {}
| ++++++++++++ ~
```
When suggesting to rename an import with `as`, use a smaller span to
render the suggestion with a better format:
```
error[E0252]: the name `baz` is defined multiple times
--> $DIR/issue-25396.rs:4:5
|
LL | use foo::baz;
| -------- previous import of the module `baz` here
LL | use bar::baz;
| ^^^^^^^^ `baz` reimported here
|
= note: `baz` must be defined only once in the type namespace of this module
help: you can use `as` to change the binding name of the import
|
LL | use bar::baz as other_baz;
| ++++++++++++
```
Rollup of 8 pull requests
Successful merges:
- #125042 (Use ordinal number in argument error)
- #127229 (rustdoc: click target for sidebar items flush left)
- #127337 (Move a few intrinsics to Rust abi)
- #127472 (MIR building: Stop using `unpack!` for `BlockAnd<()>`)
- #127579 (Solve a error `.clone()` suggestion when moving a mutable reference)
- #127769 (Don't use implicit features in `Cargo.toml` in `compiler/`)
- #127844 (Remove invalid further restricting suggestion for type bound)
- #127855 (Add myself to review rotation)
r? `@ghost`
`@rustbot` modify labels: rollup
Provided methods currently don't get type erasure performed on them
because they are not in an `impl` block. If we are instantiating a
method that is an associated item, but *not* in an impl block, treat it
as a provided method instead.
We were previously telling people to write what was already there, instead of removal.
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/E0229.rs:13:25
|
LL | fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
| ^^^^^^^ associated item constraint not allowed here
|
help: consider removing this associated item binding
|
LL - fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
LL + fn baz<I>(x: &<I as Foo>::A) {}
|
```
Remove invalid further restricting suggestion for type bound
This PR partially addresses #127555, it will remove the obvious error suggestion:
```console
| ^^^^ required by this bound in `<Baz as Foo>::bar`
help: consider further restricting this bound
|
12 | F: FnMut() + Send + std::marker::Send,
| +++++++++++++++++++
```
I may create another PR to get a better diagnostic for `impl has stricter requirements than trait` scenario.
Solve a error `.clone()` suggestion when moving a mutable reference
If the moved value is a mut reference, it is used in a generic function and it's type is a generic param, suggest it can be reborrowed to avoid moving.
for example:
```rust
struct Y(u32);
// x's type is '& mut Y' and it is used in `fn generic<T>(x: T) {}`.
fn generic<T>(x: T) {}
```
fixes#127285
Move a few intrinsics to Rust abi
Move a few more intrinsic functions to the convention added in #121192. In the second commit, I added documentation about their safety requirements. Let me know if you would like me to move the second commit to a different PR.
Note: I kept the same signature of `pref_align_of`, but I was wondering why this function is considered unsafe?
Use ordinal number in argument error
Add an ordinal number to two argument errors ("unexpected" and "missing") for ease of understanding error.
```
error[E0061]: this function takes 3 arguments but 2 arguments were supplied
--> test.rs:11:5
|
11 | f(42, 'a');
| ^ --- 2nd argument of type `f32` is missing
|
(snip)
error[E0061]: this function takes 3 arguments but 4 arguments were supplied
--> test.rs:12:5
|
12 | f(42, 42, 1.0, 'a');
| ^ ----
| | |
| | unexpected 2nd argument of type `{integer}`
| help: remove the extra argument
```
To get an ordinal number, I copied `ordinalize` from other crate `rustc_resolve` because I think it is too much to link `rustc_resolve` for this small function. Please let me know if there is a better way.
Rollup of 9 pull requests
Successful merges:
- #125206 (Simplify environment variable examples)
- #126271 (Skip fast path for dec2flt when optimize_for_size)
- #126776 (Clean up more comments near use declarations)
- #127444 (`impl Send + Sync` and override `count` for the `CStr::bytes` iterator)
- #127512 (Terminate `--print link-args` output with newline)
- #127792 (std: Use `read_unaligned` for reads from DWARF)
- #127807 (Use futex.rs for Windows thread parking)
- #127833 (zkvm: add `#[forbid(unsafe_op_in_unsafe_fn)]` in `stdlib`)
- #127836 (std: Forbid unwrapped unsafe ops in xous and uefi modules)
Failed merges:
- #127813 (Prevent double reference in generic futex)
r? `@ghost`
`@rustbot` modify labels: rollup
This is a very large commit since a lot needs to be changed in order to
make the tests pass. The salient changes are:
- `ConstArgKind` gets a new `Path` variant, and all const params are now
represented using it. Non-param paths still use `ConstArgKind::Anon`
to prevent this change from getting too large, but they will soon use
the `Path` variant too.
- `ConstArg` gets a distinct `hir_id` field and its own variant in
`hir::Node`. This affected many parts of the compiler that expected
the parent of an `AnonConst` to be the containing context (e.g., an
array repeat expression). They have been changed to check the
"grandparent" where necessary.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at #127009.
Migrate `compiler-lookup-paths`, `dump-mono-stats` and `prune-link-args` `run-make` tests to `rmake` or `ui` format
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
try-job: x86_64-msvc
try-job: aarch64-apple
try-job: dist-x86_64-linux
try-job: armhf-gnu
Invert infer `error_reporting` mod struture
Parallel change to #127493, which moves `rustc_infer::infer::error_reporting` to `rustc_infer::error_reporting::infer`. After this, we should just be able to merge this into `rustc_trait_selection::error_reporting::infer`, and pull down `TypeErrCtxt` into that crate. 👍
r? lcnr
Deny keyword lifetimes pre-expansion
https://github.com/rust-lang/rust/pull/126452#issuecomment-2179464266
> Secondly, we confirmed that we're OK with moving the validation of keywords in lifetimes to pre-expansion from post-expansion. We similarly consider this a bug fix. While the breakage of the convenience feature of the with_locals crate that relies on this is unfortunate, and we wish we had not overlooked this earlier for that reason, we're fortunate that the breakage is contained to only one crate, and we're going to accept this breakage as the extra complexity we'd need to carry in the compiler to work around this isn't deemed worth it.
T-lang considers it to be a bugfix to deny `'keyword` lifetimes in the parser, rather than during AST validation that only happens post-expansion. This has one breakage: https://github.com/rust-lang/rust/pull/126452#issuecomment-2171654756
This probably should get lang FCP'd just for consistency.
Delegation: support coercion for target expression
(solves https://github.com/rust-lang/rust/issues/118212#issuecomment-2160723092)
The implementation consist of 2 parts. Firstly, method call is generated instead of fully qualified call in AST->HIR lowering if there were no generic arguments or `Qpath` were provided. These restrictions are imposed due to the loss of information after desugaring. For example in
```rust
trait Trait {
fn foo(&self) {}
}
reuse <u8 as Trait>::foo;
```
We would like to generate such a code:
```rust
fn foo<u8: Trait>(x: &u8) {
x.foo(x)
}
```
however, the signature is inherited during HIR analysis where `u8` was discarded.
Then, we probe the single pre-resolved method.
P.S In the future, we would like to avoid restrictions on the callee path by `Self` autoref/autoderef in fully qualified calls, but at the moment it didn't work out.
r? `@petrochenkov`
Migrate `std-core-cycle`, `obey-crate-type-flag`, `mixing-libs` and `issue-18943` `run-make` tests to `rmake.rs`
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
try-job: x86_64-apple-1
try-job: x86_64-msvc
try-job: aarch64-gnu
when the `C-cmse-nonsecure-call` ABI is used, arguments and return values must be passed via registers. Failing to do so (i.e. spilling to the stack) causes an LLVM error down the line, but now rustc will properly emit an error a bit earlier in the chain
Make sure trait def ids match before zipping args in `note_function_argument_obligation`
Fixes#126416Fixes#127745
Didn't add both tests b/c I felt like it was unnecessary.
Make parse error suggestions verbose and fix spans
Go over all structured parser suggestions and make them verbose style.
When suggesting to add or remove delimiters, turn them into multiple suggestion parts.
offset_from: always allow pointers to point to the same address
This PR implements the last remaining part of the t-opsem consensus in https://github.com/rust-lang/unsafe-code-guidelines/issues/472: always permits offset_from when both pointers have the same address, no matter how they are computed. This is required to achieve *provenance monotonicity*.
Tracking issue: https://github.com/rust-lang/rust/issues/117945
### What is provenance monotonicity and why does it matter?
Provenance monotonicity is the property that adding arbitrary provenance to any no-provenance pointer must never make the program UB. More specifically, in the program state, data in memory is stored as a sequence of [abstract bytes](https://rust-lang.github.io/unsafe-code-guidelines/glossary.html#abstract-byte), where each byte can optionally carry provenance. When a pointer is stored in memory, all of the bytes it is stored in carry that provenance. Provenance monotonicity means: if we take some byte that does not have provenance, and give it some arbitrary provenance, then that cannot change program behavior or introduce UB into a UB-free program.
We care about provenance monotonicity because we want to allow the optimizer to remove provenance-stripping operations. Removing a provenance-stripping operation effectively means the program after the optimization has provenance where the program before the optimization did not -- since the provenance removal does not happen in the optimized program. IOW, the compiler transformation added provenance to previously provenance-free bytes. This is exactly what provenance monotonicity lets us do.
We care about removing provenance-stripping operations because `*ptr = *ptr` is, in general, (likely) a provenance-stripping operation. Specifically, consider `ptr: *mut usize` (or any integer type), and imagine the data at `*ptr` is actually a pointer (i.e., we are type-punning between pointers and integers). Then `*ptr` on the right-hand side evaluates to the data in memory *without* any provenance (because [integers do not have provenance](https://rust-lang.github.io/rfcs/3559-rust-has-provenance.html#integers-do-not-have-provenance)). Storing that back to `*ptr` means that the abstract bytes `ptr` points to are the same as before, except their provenance is now gone. This makes `*ptr = *ptr` a provenance-stripping operation (Here we assume `*ptr` is fully initialized. If it is not initialized, evaluating `*ptr` to a value is UB, so removing `*ptr = *ptr` is trivially correct.)
### What does `offset_from` have to do with provenance monotonicity?
With `ptr = without_provenance(N)`, `ptr.offset_from(ptr)` is always well-defined and returns 0. By provenance monotonicity, I can now add provenance to the two arguments of `offset_from` and it must still be well-defined. Crucially, I can add *different* provenance to the two arguments, and it must still be well-defined. In other words, this must always be allowed: `ptr1.with_addr(N).offset_from(ptr2.with_addr(N))` (and it returns 0). But the current spec for `offset_from` says that the two pointers must either both be derived from an integer or both be derived from the same allocation, which is not in general true for arbitrary `ptr1`, `ptr2`.
To obtain provenance monotonicity, this PR hence changes the spec for offset_from to say that if both pointers have the same address, the function is always well-defined.
### What further consequences does this have?
It means the compiler can no longer transform `end2 = begin.offset(end.offset_from(begin))` into `end2 = end`. However, it can still be transformed into `end2 = begin.with_addr(end.addr())`, which later parts of the backend (when provenance has been erased) can trivially turn into `end2 = end`.
The only alternative I am aware of is a fundamentally different handling of zero-sized accesses, where a "no provenance" pointer is not allowed to do zero-sized accesses and instead we have a special provenance that indicates "may be used for zero-sized accesses (and nothing else)". `offset` and `offset_from` would then always be UB on a "no provenance" pointer, and permit zero-sized offsets on a "zero-sized provenance" pointer. This achieves provenance monotonicity. That is, however, a breaking change as it contradicts what we landed in https://github.com/rust-lang/rust/pull/117329. It's also a whole bunch of extra UB, which doesn't seem worth it just to achieve that transformation.
### What about the backend?
LLVM currently doesn't have an intrinsic for pointer difference, so we anyway cast to integer and subtract there. That's never UB so it is compatible with any relaxation we may want to apply.
If LLVM gets a `ptrsub` in the future, then plausibly it will be consistent with `ptradd` and [consider two equal pointers to be inbounds](https://github.com/rust-lang/rust/pull/124921#issuecomment-2205795829).
Following on PR #126502, add `rustc -Zdump-mir-exclude-alloc-bytes`
to tests/mir-opt/dataflow-const-prop/aggregate_copy.rs as well
to skip writing allocation bytes in MIR dumps.
Fixes#126261
Add regression test for a gce + effects ICE
Fixes#125770
I'm not *exactly* sure why this stopped ICEing, I assume its something to do with the fact that there used to be a generic parameter on `Add` for the host generic and we have mismatched args here, which #125608 made no longer later cause issues. But now the desugaring is also different so? 🤷♀️
r? `@fee1-dead`
Gate the type length limit check behind a nightly flag
Effectively disables the type length limit by introducing a `-Zenforce-type-length-limit` which defaults to **`false`**, since making the length limit actually be enforced ended up having a worse fallout than expected. We still keep the code around, but the type length limit attr is now a noop (except for its usage in some diagnostics code?).
r? `@lcnr` -- up to you to decide what team consensus we need here since this reverses an FCP decision.
Reopens#125460 (if we decide to reopen it or keep it closed)
Effectively reverses the decision FCP'd in #125507Closes#127346
Only track mentioned places for jump threading
This PR aims to reduce the state space size in jump threading and dataflow const-prop opts.
The current implementation walks the types of all locals, and creates a place for each possible projection. This can easily lead to a large number of places and tracked values, most being useless to the actual pass.
With this PR, we instead collect places that appear syntactically in the MIR (first commit). However, this is not sufficient (second commit), and we miss places that we could track in aggregate assignments. The third commit tracks such assignments to mirror place projections, see the inline comment.
This is complementary to https://github.com/rust-lang/rust/pull/127036
r? `@oli-obk`
Add FileCheck annotations to mir-opt/dest-prop tests
Part of https://github.com/rust-lang/rust/issues/116971, adds FileCheck annotations to MIR-opt tests in tests/mir-opt/dest-prop.
I would like some feedback. Also, I don't know how to approach `union.rs`. I couldn't figure out what it is testing.
r? cjgillot
fix interleaved output in the default panic hook when multiple threads panic simultaneously
previously, we only held a lock for printing the backtrace itself. since all threads were printing to the same file descriptor, that meant random output in the default panic hook from one thread would be interleaved with the backtrace from another. now, we hold the lock for the full duration of the hook, and the output is ordered.
---
i noticed some odd things while working on this you may or may not already be aware of.
- libbacktrace is included as a submodule instead of a normal rustc crate, and as a result uses `cfg(backtrace_in_std)` instead of a more normal `cfg(feature = "rustc-dep-of-std")`. probably this is left over from before rust used a cargo-based build system?
- the default panic handler uses `trace_unsynchronized`, etc, in `sys::backtrace::print`. as a result, the lock only applies to concurrent *panic handlers*, not concurrent *threads*. in other words, if another, non-panicking, thread tried to print a backtrace at the same time as the panic handler, we may have UB, especially on windows.
- we have the option of changing backtrace to enable locking when `backtrace_in_std` is set so we can reuse their lock instead of trying to add our own.
Rollup of 11 pull requests
Successful merges:
- #126502 (Ignore allocation bytes in some mir-opt tests)
- #126922 (add lint for inline asm labels that look like binary)
- #127209 (Added the `xop` target-feature and the `xop_target_feature` feature gate)
- #127310 (Fix import suggestion ice)
- #127338 (Migrate `extra-filename-with-temp-outputs` and `issue-85019-moved-src-dir` `run-make` tests to rmake)
- #127381 (Migrate `issue-83045`, `rustc-macro-dep-files` and `env-dep-info` `run-make` tests to rmake)
- #127535 (Fire unsafe_code lint on unsafe extern blocks)
- #127619 (Suggest using precise capturing for hidden type that captures region)
- #127631 (Remove `fully_normalize`)
- #127632 (Implement `precise_capturing` support for rustdoc)
- #127660 (Rename the internal `const_strlen` to just `strlen`)
r? `@ghost`
`@rustbot` modify labels: rollup
Implement `precise_capturing` support for rustdoc
Implements rustdoc (+json) support for local (i.e. non-cross-crate-inlined) RPITs with `use<...>` precise capturing syntax.
Tests kinda suck. They're really hard to write 😰
r? `@fmease` or re-roll if you're too busy!
also cc `@aDotInTheVoid` for the json side
Tracking:
* https://github.com/rust-lang/rust/issues/127228#issuecomment-2201443216 (not fully fixed for cross-crate-inlined opaques)
* https://github.com/rust-lang/rust/issues/123432
Suggest using precise capturing for hidden type that captures region
Adjusts the "add `+ '_`" suggestion for opaques to instead suggest adding or reusing the `+ use<>` in the opaque.
r? oli-obk or please re-roll if you're busy!
Migrate `extra-filename-with-temp-outputs` and `issue-85019-moved-src-dir` `run-make` tests to rmake
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
Please try:
try-job: armhf-gnu
// try-job: test-various // already tried
try-job: x86_64-msvc
try-job: aarch64-apple
Fix import suggestion ice
Fixes#127302#127302 only crash in edition 2015
#120074 can only reproduced in edition 2021
so I added revisions in test file.
Added the `xop` target-feature and the `xop_target_feature` feature gate
This is an effort towards #127208. This adds the `xop` target feature gated by `xop_target_feature`.
add lint for inline asm labels that look like binary
fixes#94426
Due to a bug/feature in LLVM, labels composed of only the digits `0` and `1` can sometimes be confused with binary literals, even if a binary literal would not be valid in that position.
This PR adds detection for such labels and also as a drive-by change, adds a note to cases such as `asm!(include_str!("file"))` that the label that it found came from an expansion of a macro, it wasn't found in the source code.
I expect this PR to upset some people that were using labels `0:` or `1:` without issue because they never hit the case where LLVM got it wrong, but adding a heuristic to the lint to prevent this is not feasible - it would involve writing a whole assembly parser for every target that we have assembly support for.
[zulip discussion](https://rust-lang.zulipchat.com/#narrow/stream/238009-t-compiler.2Fmeetings/topic/.5Bweekly.5D.202024-06-20/near/445870628)
r? ``@estebank``
Ignore allocation bytes in some mir-opt tests
This adds `rustc -Zdump-mir-exclude-alloc-bytes` to skip writing allocation bytes in MIR dumps, and applies it to tests that were failing on s390x due to its big-endian byte order.
Fixes#126261
Ensure floats are returned losslessly by the Rust ABI on 32-bit x86
Solves #115567 for the (default) `"Rust"` ABI. When compiling for 32-bit x86, this PR changes the `"Rust"` ABI to return floats indirectly instead of in x87 registers (with the exception of single `f32`s, which this PR returns in general purpose registers as they are small enough to fit in one). No change is made to the `"C"` ABI as that ABI requires x87 register usage and therefore will need a different solution.
Previously we would only mention that the item was gated out, and opportunisitically mention the feature flag name when possible. We now point to the place where the item was gated, which can be behind layers of macro indirection, or in different modules.
```
error[E0433]: failed to resolve: could not find `doesnt_exist` in `inner`
--> $DIR/diagnostics-cross-crate.rs:18:23
|
LL | cfged_out::inner::doesnt_exist::hello();
| ^^^^^^^^^^^^ could not find `doesnt_exist` in `inner`
|
note: found an item that was configured out
--> $DIR/auxiliary/cfged_out.rs:6:13
|
LL | pub mod doesnt_exist {
| ^^^^^^^^^^^^
note: the item is gated here
--> $DIR/auxiliary/cfged_out.rs:5:5
|
LL | #[cfg(FALSE)]
| ^^^^^^^^^^^^^
```
