- Add clippy_dev to the rust workspace
Before, it would give an error that it wasn't either included or
excluded from the workspace:
```
error: current package believes it's in a workspace when it's not:
current: /home/joshua/rustc/src/tools/clippy/clippy_dev/Cargo.toml
workspace: /home/joshua/rustc/Cargo.toml
this may be fixable by adding `src/tools/clippy/clippy_dev` to the `workspace.members` array of the manifest located at: /home/joshua/rustc/Cargo.toml
Alternatively, to keep it out of the workspace, add the package to the `workspace.exclude` array, or add an empty `[workspace]` table to the package's manifest.
```
- Change clippy's copy of compiletest not to special-case
rust-lang/rust. Using OUT_DIR confused `clippy_dev` and it couldn't find
the test outputs. This is one of the reasons why `cargo dev bless` used
to silently do nothing (the others were that `CARGO_TARGET_DIR` and
`PROFILE` weren't set appropriately).
- Run clippy_dev on test failure
I tested this by removing a couple lines from a stderr file, and they
were correctly replaced.
- Fix clippy_dev warnings
Update stdarch submodule (to before it switched to const generics)
https://github.com/rust-lang/rust/pull/83278#issuecomment-812389823: This unblocks #82539.
Major changes:
- More AVX-512 intrinsics.
- More ARM & AArch64 NEON intrinsics.
- Updated unstable WASM intrinsics to latest draft standards.
- std_detect is now a separate crate instead of a submodule of std.
I double-checked and the first use of const generics looks like 8d5017861e, which isn't included in this PR.
r? `@Amanieu`
This also includes a cherry-pick of
ec1461905b
and https://github.com/rust-lang/stdarch/pull/1108 to fix a build
failure.
It also adds a re-export of various macros to the crate root of libstd -
previously they would show up automatically because std_detect was defined
in the same crate.
Add a tool to run `x.py` from any subdirectory
This adds a binary called `x` in `src/tools/x`. All it does is check the current directory and its ancestors for a file called `x.py`, and if it finds one, runs it.
By installing x, you can easily run `x.py` from any subdirectory, and only need to type `x`.
It can be installed with `cargo install --path src/tools/x`
This is a copy of a [binary I've been using myself when working on rust](https://github.com/casey/bootstrap), currently published to crates.io as `bootstrap`.
It could be changed to avoid indirecting through `x.py`, and instead call the bootstrap module directly. However, this seemed like the simplest thing possible, and won't break if the details of how the bootstrap module is invoked change.
This adds a binary called `x` in `src/tools/x`. All it does is check the
current directory and its ancestors for a file called `x.py`, and if it
finds one, runs it.
By installing x, you can easily `x.py` from any subdirectory.
It can be installed globally with `cargo install --path src/tools/x`
This commit is a proof-of-concept for switching the standard library's
backtrace symbolication mechanism on most platforms from libbacktrace to
gimli. The standard library's support for `RUST_BACKTRACE=1` requires
in-process parsing of object files and DWARF debug information to
interpret it and print the filename/line number of stack frames as part
of a backtrace.
Historically this support in the standard library has come from a
library called "libbacktrace". The libbacktrace library seems to have
been extracted from gcc at some point and is written in C. We've had a
lot of issues with libbacktrace over time, unfortunately, though. The
library does not appear to be actively maintained since we've had
patches sit for months-to-years without comments. We have discovered a
good number of soundness issues with the library itself, both when
parsing valid DWARF as well as invalid DWARF. This is enough of an issue
that the libs team has previously decided that we cannot feed untrusted
inputs to libbacktrace. This also doesn't take into account the
portability of libbacktrace which has been difficult to manage and
maintain over time. While possible there are lots of exceptions and it's
the main C dependency of the standard library right now.
For years it's been the desire to switch over to a Rust-based solution
for symbolicating backtraces. It's been assumed that we'll be using the
Gimli family of crates for this purpose, which are targeted at safely
and efficiently parsing DWARF debug information. I've been working
recently to shore up the Gimli support in the `backtrace` crate. As of a
few weeks ago the `backtrace` crate, by default, uses Gimli when loaded
from crates.io. This transition has gone well enough that I figured it
was time to start talking seriously about this change to the standard
library.
This commit is a preview of what's probably the best way to integrate
the `backtrace` crate into the standard library with the Gimli feature
turned on. While today it's used as a crates.io dependency, this commit
switches the `backtrace` crate to a submodule of this repository which
will need to be updated manually. This is not done lightly, but is
thought to be the best solution. The primary reason for this is that the
`backtrace` crate needs to do some pretty nontrivial filesystem
interactions to locate debug information. Working without `std::fs` is
not an option, and while it might be possible to do some sort of
trait-based solution when prototyped it was found to be too unergonomic.
Using a submodule allows the `backtrace` crate to build as a submodule
of the `std` crate itself, enabling it to use `std::fs` and such.
Otherwise this adds new dependencies to the standard library. This step
requires extra attention because this means that these crates are now
going to be included with all Rust programs by default. It's important
to note, however, that we're already shipping libbacktrace with all Rust
programs by default and it has a bunch of C code implementing all of
this internally anyway, so we're basically already switching
already-shipping functionality to Rust from C.
* `object` - this crate is used to parse object file headers and
contents. Very low-level support is used from this crate and almost
all of it is disabled. Largely we're just using struct definitions as
well as convenience methods internally to read bytes and such.
* `addr2line` - this is the main meat of the implementation for
symbolication. This crate depends on `gimli` for DWARF parsing and
then provides interfaces needed by the `backtrace` crate to turn an
address into a filename / line number. This crate is actually pretty
small (fits in a single file almost!) and mirrors most of what
`dwarf.c` does for libbacktrace.
* `miniz_oxide` - the libbacktrace crate transparently handles
compressed debug information which is compressed with zlib. This crate
is used to decompress compressed debug sections.
* `gimli` - not actually used directly, but a dependency of `addr2line`.
* `adler32`- not used directly either, but a dependency of
`miniz_oxide`.
The goal of this change is to improve the safety of backtrace
symbolication in the standard library, especially in the face of
possibly malformed DWARF debug information. Even to this day we're still
seeing segfaults in libbacktrace which could possibly become security
vulnerabilities. This change should almost entirely eliminate this
possibility whilc also paving the way forward to adding more features
like split debug information.
Some references for those interested are:
* Original addition of libbacktrace - #12602
* OOM with libbacktrace - #24231
* Backtrace failure due to use of uninitialized value - #28447
* Possibility to feed untrusted data to libbacktrace - #21889
* Soundness fix for libbacktrace - #33729
* Crash in libbacktrace - #39468
* Support for macOS, never merged - ianlancetaylor/libbacktrace#2
* Performance issues with libbacktrace - #29293, #37477
* Update procedure is quite complicated due to how many patches we
need to carry - #50955
* Libbacktrace doesn't work on MinGW with dynamic libs - #71060
* Segfault in libbacktrace on macOS - #71397
Switching to Rust will not make us immune to all of these issues. The
crashes are expected to go away, but correctness and performance may
still have bugs arise. The gimli and `backtrace` crates, however, are
actively maintained unlike libbacktrace, so this should enable us to at
least efficiently apply fixes as situations come up.
Generating the coverage map
@tmandry @wesleywiser
rustc now generates the coverage map and can support (limited)
coverage report generation, at the function level.
Example commands to generate a coverage report:
```shell
$ BUILD=$HOME/rust/build/x86_64-unknown-linux-gnu
$ $BUILD/stage1/bin/rustc -Zinstrument-coverage \
$HOME/rust/src/test/run-make-fulldeps/instrument-coverage/main.rs
$ LLVM_PROFILE_FILE="main.profraw" ./main
called
$ $BUILD/llvm/bin/llvm-profdata merge -sparse main.profraw -o main.profdata
$ $BUILD/llvm/bin/llvm-cov show --instr-profile=main.profdata main
```
r? @wesleywiser
Rust compiler MCP rust-lang/compiler-team#278
Relevant issue: #34701 - Implement support for LLVMs code coverage instrumentation
This commit is a proof-of-concept for switching the standard library's
backtrace symbolication mechanism on most platforms from libbacktrace to
gimli. The standard library's support for `RUST_BACKTRACE=1` requires
in-process parsing of object files and DWARF debug information to
interpret it and print the filename/line number of stack frames as part
of a backtrace.
Historically this support in the standard library has come from a
library called "libbacktrace". The libbacktrace library seems to have
been extracted from gcc at some point and is written in C. We've had a
lot of issues with libbacktrace over time, unfortunately, though. The
library does not appear to be actively maintained since we've had
patches sit for months-to-years without comments. We have discovered a
good number of soundness issues with the library itself, both when
parsing valid DWARF as well as invalid DWARF. This is enough of an issue
that the libs team has previously decided that we cannot feed untrusted
inputs to libbacktrace. This also doesn't take into account the
portability of libbacktrace which has been difficult to manage and
maintain over time. While possible there are lots of exceptions and it's
the main C dependency of the standard library right now.
For years it's been the desire to switch over to a Rust-based solution
for symbolicating backtraces. It's been assumed that we'll be using the
Gimli family of crates for this purpose, which are targeted at safely
and efficiently parsing DWARF debug information. I've been working
recently to shore up the Gimli support in the `backtrace` crate. As of a
few weeks ago the `backtrace` crate, by default, uses Gimli when loaded
from crates.io. This transition has gone well enough that I figured it
was time to start talking seriously about this change to the standard
library.
This commit is a preview of what's probably the best way to integrate
the `backtrace` crate into the standard library with the Gimli feature
turned on. While today it's used as a crates.io dependency, this commit
switches the `backtrace` crate to a submodule of this repository which
will need to be updated manually. This is not done lightly, but is
thought to be the best solution. The primary reason for this is that the
`backtrace` crate needs to do some pretty nontrivial filesystem
interactions to locate debug information. Working without `std::fs` is
not an option, and while it might be possible to do some sort of
trait-based solution when prototyped it was found to be too unergonomic.
Using a submodule allows the `backtrace` crate to build as a submodule
of the `std` crate itself, enabling it to use `std::fs` and such.
Otherwise this adds new dependencies to the standard library. This step
requires extra attention because this means that these crates are now
going to be included with all Rust programs by default. It's important
to note, however, that we're already shipping libbacktrace with all Rust
programs by default and it has a bunch of C code implementing all of
this internally anyway, so we're basically already switching
already-shipping functionality to Rust from C.
* `object` - this crate is used to parse object file headers and
contents. Very low-level support is used from this crate and almost
all of it is disabled. Largely we're just using struct definitions as
well as convenience methods internally to read bytes and such.
* `addr2line` - this is the main meat of the implementation for
symbolication. This crate depends on `gimli` for DWARF parsing and
then provides interfaces needed by the `backtrace` crate to turn an
address into a filename / line number. This crate is actually pretty
small (fits in a single file almost!) and mirrors most of what
`dwarf.c` does for libbacktrace.
* `miniz_oxide` - the libbacktrace crate transparently handles
compressed debug information which is compressed with zlib. This crate
is used to decompress compressed debug sections.
* `gimli` - not actually used directly, but a dependency of `addr2line`.
* `adler32`- not used directly either, but a dependency of
`miniz_oxide`.
The goal of this change is to improve the safety of backtrace
symbolication in the standard library, especially in the face of
possibly malformed DWARF debug information. Even to this day we're still
seeing segfaults in libbacktrace which could possibly become security
vulnerabilities. This change should almost entirely eliminate this
possibility whilc also paving the way forward to adding more features
like split debug information.
Some references for those interested are:
* Original addition of libbacktrace - #12602
* OOM with libbacktrace - #24231
* Backtrace failure due to use of uninitialized value - #28447
* Possibility to feed untrusted data to libbacktrace - #21889
* Soundness fix for libbacktrace - #33729
* Crash in libbacktrace - #39468
* Support for macOS, never merged - ianlancetaylor/libbacktrace#2
* Performance issues with libbacktrace - #29293, #37477
* Update procedure is quite complicated due to how many patches we
need to carry - #50955
* Libbacktrace doesn't work on MinGW with dynamic libs - #71060
* Segfault in libbacktrace on macOS - #71397
Switching to Rust will not make us immune to all of these issues. The
crashes are expected to go away, but correctness and performance may
still have bugs arise. The gimli and `backtrace` crates, however, are
actively maintained unlike libbacktrace, so this should enable us to at
least efficiently apply fixes as situations come up.
This commit moves the compiler-builtins-specific build logic from
`src/bootstrap/bin/rustc.rs` into the workspace `Cargo.toml`'s
`[profile]` configuration. Now that rust-lang/cargo#7253 is fixed we can
ensure that Cargo knows about debug assertions settings, and it can also
be configured to specifically disable debug assertions unconditionally
for compiler-builtins. This should improve rebuild logic when
debug-assertions settings change and also improve build-std integration
where Cargo externally now has an avenue to learn how to build
compiler-builtins as well.
This commit intends to fix an accidental regression from #70846. The
goal of #70846 was to build compiler-builtins with a maximal number of
CGUs to ensure that each module in the source corresponds to an object
file. This high degree of control for compiler-builtins is desirable to
ensure that there's at most one exported symbol per CGU, ideally
enabling compiler-builtins to not conflict with the system libgcc as
often.
In #70846, however, only part of the compiler understands that
compiler-builtins is built with many CGUs. The rest of the compiler
thinks it's building with `sess.codegen_units()`. Notably the
calculation of `sess.lto()` consults `sess.codegen_units()`, which when
there's only one CGU it disables ThinLTO. This means that
compiler-builtins is built without ThinLTO, which is quite harmful to
performance! This is the root of the cause from #73135 where intrinsics
were found to not be inlining trivial functions.
The fix applied in this commit is to remove the special-casing of
compiler-builtins in the compiler. Instead the build system is now
responsible for special-casing compiler-builtins. It doesn't know
exactly how many CGUs will be needed but it passes a large number that
is assumed to be much greater than the number of source-level modules
needed. After reading the various locations in the compiler source, this
seemed like the best solution rather than adding more and more special
casing in the compiler for compiler-builtins.
Closes#73135
Change opt-level from 2 back to 3
In Cargo.toml, the opt-level for `release` and `bench` was overridden to be 2. This was to work around a problem with LLVM 7. However, rust no longer uses LLVM 7, so this is hopefully no longer needed?
I tried a little bit to replicate the original problem, and could not. I think running this through CI is the best way to smoke test this :) Even if things break dramatically, the comment should be updated to reflect that things are still broken with LLVM 9.
I'm just getting started playing with the compiler, so apologies if I've missed an obvious problem here.
fixes#52378
(possibly relevant is the [current update to LLVM 10](https://github.com/rust-lang/rust/pull/67759))
In Cargo.toml, the opt-level for `release` and `bench` was
overridden to be 2. This was to work around a problem with LLVM
7. However, rust no longer uses LLVM 7, so this is no longer
needed.
This creates a small compile time regression in MIR constant eval,
so I've added a #[inline(always)] on the `step` function used in
const eval
Also creates a binary size increase in wasm-stringify-ints-small,
so I've bumped the limit there.
Since its inception rustbuild has always worked in three stages: one for
libstd, one for libtest, and one for rustc. These three stages were
architected around crates.io dependencies, where rustc wants to depend
on crates.io crates but said crates don't explicitly depend on libstd,
requiring a sysroot assembly step in the middle. This same logic was
applied for libtest where libtest wants to depend on crates.io crates
(`getopts`) but `getopts` didn't say that it depended on std, so it
needed `std` built ahead of time.
Lots of time has passed since the inception of rustbuild, however,
and we've since gotten to the point where even `std` itself is depending
on crates.io crates (albeit with some wonky configuration). This
commit applies the same logic to the two dependencies that the `test`
crate pulls in from crates.io, `getopts` and `unicode-width`. Over the
many years since rustbuild's inception `unicode-width` was the only
dependency picked up by the `test` crate, so the extra configuration
necessary to get crates building in this crate graph is unlikely to be
too much of a burden on developers.
After this patch it means that there are now only two build phasese of
rustbuild, one for libstd and one for rustc. The libtest/libproc_macro
build phase is all lumped into one now with `std`.
This was originally motivated by rust-lang/cargo#7216 where Cargo was
having to deal with synthesizing dependency edges but this commit makes
them explicit in this repository.
Changes:
````
Revert "tests: used_underscore_binding_macro: disable random_state lint."
Revert "Auto merge of #3603 - xfix:random-state-lint, r=phansch"
rustup https://github.com/rust-lang/rust/pull/56837
rustup (don't know the exact PR unfortunately)
Add itertools to integration tests
tests: used_underscore_binding_macro: disable random_state lint.
Trigger `use_self` lint in local macros
Add run-rustfix where it already passes
rustup: https://github.com/rust-lang/rust/pull/55517
Make clippy work with parallel rustc
Add ui/for_kv_map test for false positive in #1279
Update to latest compiletest-rs release
add testcase for #3462
deps: bump rustc_tools_util version from 0.1.0 to 0.1.1 just in case...
Use compiletest's aux-build header instead of include macro
rustc_tool_utils: fix failure to create proper non-repo version string when used in crates on crates.io, bump version
rustfmt
UI test cleanup: Extract ifs_same_cond tests
Extract IteratorFalsePositives into option_helpers.rs
UI test cleanup: Extract for_kv_map lint tests
UI test cleanup: Extract lint from methods.rs test
Fix test for rust-lang/rust#57250
Limit infinite_iter collect() check to known types
Some improvements to util documentation
Use hashset for name blacklist
Reformat random_state tests
Use node_id_to_type_opt instead of node_it_to_type in random_state
Check pattern equality while checking declaration equality
random_state lint
Move constant write checks to temporary_assignment lint
Use an FxHashSet for valid idents in documentation lint
Fix suggestion for unnecessary_ref lint
Update CONTRIBUTING.md for rustfix tests
Update .fixed files via update-references.sh
Run rustfix on first UI test
Use WIP branch for compiletest_rs
````
Ever since we added a Cargo-based build system for the compiler the
standard library has always been a little special, it's never been able
to depend on crates.io crates for runtime dependencies. This has been a
result of various limitations, namely that Cargo doesn't understand that
crates from crates.io depend on libcore, so Cargo tries to build crates
before libcore is finished.
I had an idea this afternoon, however, which lifts the strategy
from #52919 to directly depend on crates.io crates from the standard
library. After all is said and done this removes a whopping three
submodules that we need to manage!
The basic idea here is that for any crate `std` depends on it adds an
*optional* dependency on an empty crate on crates.io, in this case named
`rustc-std-workspace-core`. This crate is overridden via `[patch]` in
this repository to point to a local crate we write, and *that* has a
`path` dependency on libcore.
Note that all `no_std` crates also depend on `compiler_builtins`, but if
we're not using submodules we can publish `compiler_builtins` to
crates.io and all crates can depend on it anyway! The basic strategy
then looks like:
* The standard library (or some transitive dep) decides to depend on a
crate `foo`.
* The standard library adds
```toml
[dependencies]
foo = { version = "0.1", features = ['rustc-dep-of-std'] }
```
* The crate `foo` has an optional dependency on `rustc-std-workspace-core`
* The crate `foo` has an optional dependency on `compiler_builtins`
* The crate `foo` has a feature `rustc-dep-of-std` which activates these
crates and any other necessary infrastructure in the crate.
A sample commit for `dlmalloc` [turns out to be quite simple][commit].
After that all `no_std` crates should largely build "as is" and still be
publishable on crates.io! Notably they should be able to continue to use
stable Rust if necessary, since the `rename-dependency` feature of Cargo
is soon stabilizing.
As a proof of concept, this commit removes the `dlmalloc`,
`libcompiler_builtins`, and `libc` submodules from this repository. Long
thorns in our side these are now gone for good and we can directly
depend on crates.io! It's hoped that in the long term we can bring in
other crates as necessary, but for now this is largely intended to
simply make it easier to manage these crates and remove submodules.
This should be a transparent non-breaking change for all users, but one
possible stickler is that this almost for sure breaks out-of-tree
`std`-building tools like `xargo` and `cargo-xbuild`. I think it should
be relatively easy to get them working, however, as all that's needed is
an entry in the `[patch]` section used to build the standard library.
Hopefully we can work with these tools to solve this problem!
[commit]: 28ee12db81
