Distinguish between library and lang UB in assert_unsafe_precondition
As described in https://github.com/rust-lang/rust/pull/121583#issuecomment-1963168186, `assert_unsafe_precondition` now explicitly distinguishes between language UB (conditions we explicitly optimize on) and library UB (things we document you shouldn't do, and maybe some library internals assume you don't do).
`debug_assert_nounwind` was originally added to avoid the "only at runtime" aspect of `assert_unsafe_precondition`. Since then the difference between the macros has gotten muddied. This totally revamps the situation.
Now _all_ preconditions shall be checked with `assert_unsafe_precondition`. If you have a precondition that's only checkable at runtime, do a `const_eval_select` hack, as done in this PR.
r? RalfJung
Use `ControlFlow` in visitors.
Follow up to #121256
This does have a few small behaviour changes in some diagnostic output where the visitor will now find the first match rather than the last match. The change in `find_anon_types.rs` has the only affected test. I don't see this being an issue as the last occurrence isn't any better of a choice than the first.
Make TAITs and ATPITs capture late-bound lifetimes in scope
This generalizes the behavior that RPITs have, where they duplicate their in-scope lifetimes so that they will always *reify* late-bound lifetimes that they capture. This allows TAITs and ATPITs to properly error when they capture in-scope late-bound lifetimes.
r? `@oli-obk` cc `@aliemjay`
Fixes#122093 and therefore https://github.com/rust-lang/rust/pull/120700#issuecomment-1981213868
Add asm goto support to `asm!`
Tracking issue: #119364
This PR implements asm-goto support, using the syntax described in "future possibilities" section of [RFC2873](https://rust-lang.github.io/rfcs/2873-inline-asm.html#asm-goto).
Currently I have only implemented the `label` part, not the `fallthrough` part (i.e. fallthrough is implicit). This doesn't reduce the expressive though, since you can use label-break to get arbitrary control flow or simply set a value and rely on jump threading optimisation to get the desired control flow. I can add that later if deemed necessary.
r? ``@Amanieu``
cc ``@ojeda``
Prior to the previous commit, `#[rust_lint_diagnostics]` attributes
could only be used on methods with an `impl Into<{D,Subd}iagMessage>`
parameter. But there are many other nearby diagnostic methods (e.g.
`Diag::span`) that don't take such a parameter and should have the
attribute.
This commit adds the missing attribute to these `Diag` methods. This
requires adding some missing
`#[allow(rustc::diagnostic_outside_of_impl)]` markers at call sites to
these methods.
Currently it only checks calls to functions marked with
`#[rustc_lint_diagnostics]`. This commit changes it to check calls to
any function with an `impl Into<{D,Subd}iagMessage>` parameter. This
greatly improves its coverage and doesn't rely on people remembering to
add `#[rustc_lint_diagnostics]`.
The commit also adds `#[allow(rustc::untranslatable_diagnostic)`]
attributes to places that need it that are caught by the improved lint.
These places that might be easy to convert to translatable diagnostics.
Finally, it also:
- Expands and corrects some comments.
- Does some minor formatting improvements.
- Adds missing `DecorateLint` cases to
`tests/ui-fulldeps/internal-lints/diagnostics.rs`.
Add `StructurallyRelateAliases` to allow instantiating infer vars with rigid aliases.
Change `instantiate_query_response` to be infallible in the new solver. This requires canonicalization to not hide any information used by the query, so weaken
universe compression. It also modifies `term_is_fully_unconstrained` to allow
region inference variables in a higher universe.
fix generalizer unsoundness
I ended up getting confused while trying to flip the variances when flipping the order. Should be all right now.
This is only exploitable when generalizing if the `ambient_variance` of the relation is `Contravariant`. This can currently only be the case in the NLL generalizer which only rarely generalizes, causing us to miss this regression. Very much an issue with #121462 however.
I have a suspicion that quite a few delayed bug paths are impossible to
reach, so I did an experiment.
I converted every `delayed_bug` to a `bug`, ran the full test suite,
then converted back every `bug` that was hit. A surprising number were
never hit.
The next commit will convert some more back, based on human judgment.
Overhaul `Diagnostic` and `DiagnosticBuilder`
Implements the first part of https://github.com/rust-lang/compiler-team/issues/722, which moves functionality and use away from `Diagnostic`, onto `DiagnosticBuilder`.
Likely follow-ups:
- Move things around, because this PR was written to minimize diff size, so some things end up in sub-optimal places. E.g. `DiagnosticBuilder` has impls in both `diagnostic.rs` and `diagnostic_builder.rs`.
- Rename `Diagnostic` as `DiagInner` and `DiagnosticBuilder` as `Diag`.
r? `@davidtwco`
Drive-by `DUMMY_SP` -> `Span` and fmt changes
Noticed these while doing something else. There's no practical change, but it's preferable to use `DUMMY_SP` as little as possible, particularly when we have perfectlly useful `Span`s available.
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
deduplicate infer var instantiation
Having 3 separate implementations of one of the most subtle parts of our type system is not a good strategy if we want to maintain a sound type system ✨ while working on this I already found some subtle bugs in the existing code, so that's awesome 🎉 cc #121159
This was necessary as I am not confident in my nll changes in #119106, so I am first cleaning this up in a separate PR.
r? `@BoxyUwU`
Noticed these while doing something else. There's no practical change, but it's preferable to use `DUMMY_SP` as little as possible, particularly when we have perfectlly useful `Span`s available.
There are lots of functions that modify a diagnostic. This can be via a
`&mut Diagnostic` or a `&mut DiagnosticBuilder`, because the latter type
wraps the former and impls `DerefMut`.
This commit converts all the `&mut Diagnostic` occurrences to `&mut
DiagnosticBuilder`. This is a step towards greatly simplifying
`Diagnostic`. Some of the relevant function are made generic, because
they deal with both errors and warnings. No function bodies are changed,
because all the modifier methods are available on both `Diagnostic` and
`DiagnosticBuilder`.
errors: only eagerly translate subdiagnostics
Subdiagnostics don't need to be lazily translated, they can always be eagerly translated. Eager translation is slightly more complex as we need to have a `DiagCtxt` available to perform the translation, which involves slightly more threading of that context.
This slight increase in complexity should enable later simplifications - like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages into the diagnostic structs rather than having them in separate files (working on that was what led to this change).
r? ```@nnethercote```
Add and use a simple extension trait derive macro in the compiler
Adds `#[extension]` to `rustc_macros` for implementing an extension trait. This expands an impl (with an optional visibility) into two parallel trait + impl definitions.
before:
```rust
pub trait Extension {
fn a();
}
impl Extension for () {
fn a() {}
}
```
to:
```rust
#[extension]
pub impl Extension for () {
fn a() {}
}
```
Opted to just implement it by hand because I couldn't figure if there was a "canonical" choice of extension trait macro in the ecosystem. It's really lightweight anyways, and can always be changed.
I'm interested in adding this because I'd like to later split up the large `TypeErrCtxtExt` traits into several different files. This should make it one step easier.
we already use `instantiate_const_var`. This does lose some debugging
info for nll because we stop populating the `reg_var_to_origin` table with
`RegionCtxt::Existential(None)`, I don't think that matters however.
Supporting this adds additional complexity to one of the most involved
parts of the type system, so I really don't think it's worth it.
