`Diagnostic::code` has the type `DiagnosticId`, which has `Error` and
`Lint` variants. Plus `Diagnostic::is_lint` is a bool, which should be
redundant w.r.t. `Diagnostic::code`.
Seems simple. Except it's possible for a lint to have an error code, in
which case its `code` field is recorded as `Error`, and `is_lint` is
required to indicate that it's a lint. This is what happens with
`derive(LintDiagnostic)` lints. Which means those lints don't have a
lint name or a `has_future_breakage` field because those are stored in
the `DiagnosticId::Lint`.
It's all a bit messy and confused and seems unintentional.
This commit:
- removes `DiagnosticId`;
- changes `Diagnostic::code` to `Option<String>`, which means both
errors and lints can straightforwardly have an error code;
- changes `Diagnostic::is_lint` to `Option<IsLint>`, where `IsLint` is a
new type containing a lint name and a `has_future_breakage` bool, so
all lints can have those, error code or not.
Move platform modules into `sys::pal`
This is the initial step of #117276. `sys` just re-exports everything from the current `sys` for now, I'll move the implementations for the individual features one-by-one after this PR merges.
By making it an `EscapeError` instead of a `LitError`. This makes it
like the other errors produced when checking string literals contents,
e.g. for invalid escape sequences or bare CR chars.
NOTE: this means these errors are issued earlier, before expansion,
which changes behaviour. It will be possible to move the check back to
the later point if desired. If that happens, it's likely that all the
string literal contents checks will be delayed together.
One nice thing about this: the old approach had some code in
`report_lit_error` to calculate the span of the nul char from a range.
This code used a hardwired `+2` to account for the `c"` at the start of
a C string literal, but this should have changed to a `+3` for raw C
string literals to account for the `cr"`, which meant that the caret in
`cr"` nul error messages was one short of where it should have been. The
new approach doesn't need any of this and avoids the off-by-one error.
`is_force_warn` is only possible for diagnostics with `Level::Warning`,
but it is currently stored in `Diagnostic::code`, which every diagnostic
has.
This commit:
- removes the boolean `DiagnosticId::Lint::is_force_warn` field;
- adds a `ForceWarning` variant to `Level`.
Benefits:
- The common `Level::Warning` case now has no arguments, replacing
lots of `Warning(None)` occurrences.
- `rustc_session::lint::Level` and `rustc_errors::Level` are more
similar, both having `ForceWarning` and `Warning`.
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
We have `span_delayed_bug` and often pass it a `DUMMY_SP`. This commit
adds `delayed_bug`, which matches pairs like `err`/`span_err` and
`warn`/`span_warn`.
- `struct_foo` + `emit` -> `foo`
- `create_foo` + `emit` -> `emit_foo`
I have made recent commits in other PRs that have removed some of these
shortcuts for combinations with few uses, e.g.
`struct_span_err_with_code`. But for the remaining combinations that
have high levels of use, we might as well use them wherever possible.
Remove `-Zdont-buffer-diagnostics`.
It was added in #54232. It seems like it was aimed at NLL development, which is well in the past. Also, it looks like `-Ztreat-err-as-bug` can be used to achieve the same effect. So it doesn't seem necessary.
r? ``@pnkfelix``
Add -Zuse-sync-unwind
Currently Rust uses async unwind by default, but async unwind will bring non-negligible size overhead. it would be nice to allow users to choose this.
In addition, async unwind currently prevents LLVM from generate compact unwind for MachO, if one wishes to generate compact unwind for MachO, then also needs this flag.
It was added in #54232. It seems like it was aimed at NLL development,
which is well in the past. Also, it looks like `-Ztreat-err-as-bug` can
be used to achieve the same effect. So it doesn't seem necessary.
This works for most of its call sites. This is nice, because `emit` very
much makes sense as a consuming operation -- indeed,
`DiagnosticBuilderState` exists to ensure no diagnostic is emitted
twice, but it uses runtime checks.
For the small number of call sites where a consuming emit doesn't work,
the commit adds `DiagnosticBuilder::emit_without_consuming`. (This will
be removed in subsequent commits.)
Likewise, `emit_unless` becomes consuming. And `delay_as_bug` becomes
consuming, while `delay_as_bug_without_consuming` is added (which will
also be removed in subsequent commits.)
All this requires significant changes to `DiagnosticBuilder`'s chaining
methods. Currently `DiagnosticBuilder` method chaining uses a
non-consuming `&mut self -> &mut Self` style, which allows chaining to
be used when the chain ends in `emit()`, like so:
```
struct_err(msg).span(span).emit();
```
But it doesn't work when producing a `DiagnosticBuilder` value,
requiring this:
```
let mut err = self.struct_err(msg);
err.span(span);
err
```
This style of chaining won't work with consuming `emit` though. For
that, we need to use to a `self -> Self` style. That also would allow
`DiagnosticBuilder` production to be chained, e.g.:
```
self.struct_err(msg).span(span)
```
However, removing the `&mut self -> &mut Self` style would require that
individual modifications of a `DiagnosticBuilder` go from this:
```
err.span(span);
```
to this:
```
err = err.span(span);
```
There are *many* such places. I have a high tolerance for tedious
refactorings, but even I gave up after a long time trying to convert
them all.
Instead, this commit has it both ways: the existing `&mut self -> Self`
chaining methods are kept, and new `self -> Self` chaining methods are
added, all of which have a `_mv` suffix (short for "move"). Changes to
the existing `forward!` macro lets this happen with very little
additional boilerplate code. I chose to add the suffix to the new
chaining methods rather than the existing ones, because the number of
changes required is much smaller that way.
This doubled chainging is a bit clumsy, but I think it is worthwhile
because it allows a *lot* of good things to subsequently happen. In this
commit, there are many `mut` qualifiers removed in places where
diagnostics are emitted without being modified. In subsequent commits:
- chaining can be used more, making the code more concise;
- more use of chaining also permits the removal of redundant diagnostic
APIs like `struct_err_with_code`, which can be replaced easily with
`struct_err` + `code_mv`;
- `emit_without_diagnostic` can be removed, which simplifies a lot of
machinery, removing the need for `DiagnosticBuilderState`.
Remove `-Zreport-delayed-bugs`.
It's not used within the repository in any way (e.g. in tests), and doesn't seem useful.
It was added in #52568.
r? ````@oli-obk````
Remove `-Zdump-mir-spanview`
The `-Zdump-mir-spanview` flag was added back in #76074, as a development/debugging aid for the initial work on what would eventually become `-Cinstrument-coverage`. It causes the compiler to emit an HTML file containing a function's source code, with various spans highlighted based on the contents of MIR.
When the suggestion was made to [triage and remove unnecessary `-Z` flags (Zulip)](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/.60-Z.60.20option.20triage), I noted that this flag could potentially be worth removing, but I wanted to keep it around to see whether I found it useful for my own coverage work.
But when I actually tried to use it, I ran into various issues (e.g. it crashes on `tests/coverage/closure.rs`). If I can't trust it to work properly without a full overhaul, then instead of diving down a rabbit hole of trying to fix arcane span-handling bugs, it seems better to just remove this obscure old code entirely.
---
````@rustbot```` label +A-code-coverage
Currently for these two errors we go to the effort of switching to a
standard JSON emitter, for no obvious reason, and unlike any other
errors. This behaviour was added for `pretty-json` in #45737, and then
`human-annotate-rs` copied it some time later when it was added.
This commit changes things to just using the requested emitter, which is
simpler and consistent with other errors.
Old output:
```
$ rustc --error-format pretty-json
{"$message_type":"diagnostic","message":"`--error-format=pretty-json` is unstable","code":null,"level":"error","spans":[],"children":[],"rendered":"error: `--error-format=pretty-json` is unstable\n\n"}
$ rustc --error-format human-annotate-rs
{"$message_type":"diagnostic","message":"`--error-format=human-annotate-rs` is unstable","code":null,"level":"error","spans":[],"children":[],"rendered":"error: `--error-format=human-annotate-rs` is unstable\n\n"}
```
New output:
```
$ rustc --error-format pretty-json
{
"$message_type": "diagnostic",
"message": "`--error-format=pretty-json` is unstable",
"code": null,
"level": "error",
"spans": [],
"children": [],
"rendered": "error: `--error-format=pretty-json` is unstable\n\n"
}
$ rustc --error-format human-annotate-rs
error: `--error-format=human-annotate-rs` is unstable
```
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
This involves lots of breaking changes. There are two big changes that
force changes. The first is that the bitflag types now don't
automatically implement normal derive traits, so we need to derive them
manually.
Additionally, bitflags now have a hidden inner type by default, which
breaks our custom derives. The bitflags docs recommend using the impl
form in these cases, which I did.
rework `-Zverbose`
implements the changes described in https://github.com/rust-lang/compiler-team/issues/706
the first commit is only a name change from `-Zverbose` to `-Zverbose-internals` and does not change behavior. the second commit changes diagnostics.
possible follow up work:
- `ty::pretty` could print more info with `--verbose` than it does currently. `-Z verbose-internals` shows too much info in a way that's not helpful to users. michael had ideas about this i didn't fully understand: https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/uplift.20some.20-Zverbose.20calls.20and.20rename.20to.E2.80.A6.20compiler-team.23706/near/408984200
- `--verbose` should imply `-Z write-long-types-to-disk=no`. the code in `ty_string_with_limit` should take `--verbose` into account (apparently this affects `Ty::sort_string`, i'm not familiar with this code). writing a file to disk should suggest passing `--verbose`.
r? `@compiler-errors` cc `@estebank`
Separate MIR lints from validation
Add a MIR lint pass, enabled with -Zlint-mir, which identifies undefined or
likely erroneous behaviour.
The initial implementation mostly migrates existing checks of this nature from
MIR validator, where they did not belong (those checks have false positives and
there is nothing inherently invalid about MIR with undefined behaviour).
Fixes#104736Fixes#104843Fixes#116079Fixes#116736Fixes#118990
`IntoDiagnostic` defaults to `ErrorGuaranteed`, because errors are the
most common diagnostic level. It makes sense to do likewise for the
closely-related (and much more widely used) `DiagnosticBuilder` type,
letting us write `DiagnosticBuilder<'a, ErrorGuaranteed>` as just
`DiagnosticBuilder<'a>`. This cuts over 200 lines of code due to many
multi-line things becoming single line things.
We can just get the error level in the `match` and then use
`DiagnosticBuilder::new`. This then means a number of `DiagCtxt`
functions are no longer needed, because this was the one place that used
them.
Note: the commit changes the treatment of spans for `Expect`, which was
different to all the other cases, but this has no apparent effect.
This lets different error levels share the same return type from
`emit_*`.
- A lot of inconsistencies in the `DiagCtxt` API are removed.
- `Noted` is removed.
- `FatalAbort` is introduced for fatal errors (abort via `raise`),
replacing the `EmissionGuarantee` impl for `!`.
- `Bug` is renamed `BugAbort` (to avoid clashing with `Level::Bug` and
to mirror `FatalAbort`), and modified to work in the new way with bug
errors (abort via panic).
- Various diagnostic creators and emitters updated to the new, better
signatures. Note that `DiagCtxt::bug` no longer needs to call
`panic_any`, because `emit` handles that.
Also shorten the obnoxiously long
`diagnostic_builder_emit_producing_guarantee` name.
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
Add all known `target_feature` configs to check-cfg
This PR adds all the known `target_feature` from ~~`rustc_codegen_ssa`~~ `rustc_target` to the well known list of check-cfg.
It does so by moving the list from `rustc_codegen_ssa` to `rustc_target` ~~`rustc_session` (I not sure about this, but some of the moved function take a `Session`)~~, then using it the `fill_well_known` function.
This already proved to be useful since portable-simd had a bad cfg.
cc `@nnethercote` (since we discussed it in https://github.com/rust-lang/rust/pull/118494)
It's necessary for `derive(Diagnostic)`, but is best avoided elsewhere
because there are clearer alternatives.
This required adding `Handler::struct_almost_fatal`.
Rearrange `default_configuration` and `CheckCfg::fill_well_known`.
There are comments saying these two functions should be kept in sync, but they have very different structures, process symbols in different orders, and there are some inconsistencies.
This commit reorders them so they're both mostly processing symbols in alphabetical order, which makes cross-checking them a lot easier. The commit also adds some macros to factor out repetitive code patterns.
The commit also moves the handling of `sym::test` out of `build_configuration` into `default_configuration`, where all the other symbols are handled.
r? `@bjorn3`
There are comments saying these two functions should be kept in sync,
but they have very different structures, process symbols in different
orders, and there are some inconsistencies.
This commit reorders them so they're both mostly processing symbols in
alphabetical order, which makes cross-checking them a lot easier. The
commit also adds some macros to factor out repetitive code patterns.
Plus it adds `sanitizer_cfi_normalize_{integers,pointers}` to
`fill_well_known`, which were missing.
The commit also moves the handling of `sym::test` out of
`build_configuration` into `default_configuration`, where all the other
symbols are handled.
Implement `--env` compiler flag (without `tracked_env` support)
Part of https://github.com/rust-lang/rust/issues/80792.
Implementation of https://github.com/rust-lang/compiler-team/issues/653.
Not an implementation of https://github.com/rust-lang/rfcs/pull/2794.
It adds the `--env` compiler flag option which allows to set environment values used by `env!` and `option_env!`.
Important to note: When trying to retrieve an environment variable value, it will first look into the ones defined with `--env`, and if there isn't one, then only it will look into the environment variables. So if you use `--env PATH=a`, then `env!("PATH")` will return `"a"` and not the actual `PATH` value.
As mentioned in the title, `tracked_env` support is not added here. I'll do it in a follow-up PR.
r? rust-lang/compiler
Add emulated TLS support
This is a reopen of https://github.com/rust-lang/rust/pull/96317 . many android devices still only use 128 pthread keys, so using emutls can be helpful.
Currently LLVM uses emutls by default for some targets (such as android, openbsd), but rust does not use it, because `has_thread_local` is false.
This commit has some changes to allow users to enable emutls:
1. add `-Zhas-thread-local` flag to specify that std uses `#[thread_local]` instead of pthread key.
2. when using emutls, decorate symbol names to find thread local symbol correctly.
3. change `-Zforce-emulated-tls` to `-Ztls-model=emulated` to explicitly specify whether to generate emutls.
r? `@Amanieu`
Currently LLVM uses emutls by default
for some targets (such as android, openbsd),
but rust does not use it, because `has_thread_local` is false.
This commit has some changes to allow users to enable emutls:
1. add `-Zhas-thread-local` flag to specify
that std uses `#[thread_local]` instead of pthread key.
2. when using emutls, decorate symbol names
to find thread local symbol correctly.
3. change `-Zforce-emulated-tls` to `-Ztls-model=emulated`
to explicitly specify whether to generate emutls.
`build_session` is passed an `EarlyErrorHandler` and then constructs a
`Handler`. But the `EarlyErrorHandler` is still used for some time after
that.
This commit changes `build_session` so it consumes the passed
`EarlyErrorHandler`, and also drops it as soon as the `Handler` is
built. As a result, `parse_cfg` and `parse_check_cfg` now take a
`Handler` instead of an `EarlyErrorHandler`.
These impls are all needed for just a single `IntoDiagnostic` type, not
a family of them.
Note that `ErrorGuaranteed` is the default type parameter for
`IntoDiagnostic`.
Currently, `Handler::fatal` returns `FatalError`. But `Session::fatal`
returns `!`, because it calls `Handler::fatal` and then calls `raise` on
the result. This inconsistency is unfortunate.
This commit changes `Handler::fatal` to do the `raise` itself, changing
its return type to `!`. This is safe because there are only two calls to
`Handler::fatal`, one in `rustc_session` and one in
`rustc_codegen_cranelift`, and they both call `raise` on the result.
`HandlerInner::fatal` still returns `FatalError`, so I renamed it
`fatal_no_raise` to emphasise the return type difference.
rustc_session: Address all `rustc::potential_query_instability` lints
Instead of allowing `rustc::potential_query_instability` on the whole crate we go over each lint and allow it individually if it is safe to do. Turns out all instances were safe to allow in this crate.
Part of #84447 which is **E-help-wanted**.
Report errors in jobserver inherited through environment variables
This pr attempts to catch situations, when jobserver exists, but is not being inherited.
r? `@petrochenkov`
Instead of allowing `rustc::potential_query_instability` on the whole
crate we go over each lint and allow it individually if it is safe to
do. Turns out all instances were safe to allow in this crate.
This is intended to be used for Linux kernel RETHUNK builds.
With this commit (optionally backported to Rust 1.73.0), plus a
patched Linux kernel to pass the flag, I get a RETHUNK build with
Rust enabled that is `objtool`-warning-free and is able to boot in
QEMU and load a sample Rust kernel module.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
They're not used in `rustc_session`, and `rustc_metadata` is a more
obvious location.
`MetadataLoader` was originally put into `rustc_session` in #41565 to
avoid a dependency on LLVM, but things have changed a lot since then and
that's no longer relevant, e.g. `rustc_codegen_llvm` depends on
`rustc_metadata`.
Currently we always do this:
```
use rustc_fluent_macro::fluent_messages;
...
fluent_messages! { "./example.ftl" }
```
But there is no need, we can just do this everywhere:
```
rustc_fluent_macro::fluent_messages! { "./example.ftl" }
```
which is shorter.
The `fluent_messages!` macro produces uses of
`crate::{D,Subd}iagnosticMessage`, which means that every crate using
the macro must have this import:
```
use rustc_errors::{DiagnosticMessage, SubdiagnosticMessage};
```
This commit changes the macro to instead use
`rustc_errors::{D,Subd}iagnosticMessage`, which avoids the need for the
imports.
Enable Rust to use the EHCont security feature of Windows
In the future Windows will enable Control-flow Enforcement Technology (CET aka Shadow Stacks). To protect the path where the context is updated during exception handling, the binary is required to enumerate valid unwind entrypoints in a dedicated section which is validated when the context is being set during exception handling.
The required support for EHCONT Guard has already been merged into LLVM, long ago. This change simply adds the Rust codegen option to enable it.
Relevant LLVM change: https://reviews.llvm.org/D40223
This also adds a new `ehcont-guard` option to the bootstrap config which enables EHCont Guard when building std.
We at Microsoft have been using this feature for a significant period of time; we are confident that the LLVM feature, when enabled, generates well-formed code.
We currently enable EHCONT using a codegen feature, but I'm certainly open to refactoring this to be a target feature instead, or to use any appropriate mechanism to enable it.
Remove `feature` from the list of well known check-cfg name
This PR removes `feature` from the list of well known check-cfg.
This is done for multiple reasons:
- Cargo is the source of truth, rustc shouldn't have any knowledge of it
- It creates a conflict between Cargo and rustc when there are no features defined.
In this case Cargo won't pass any `--check-cfg` for `feature` since no feature will ever be passed, but rustc by having in it's list adds a implicit `cfg(feature, values(any()))` which is completely wrong. Having any cfg `feature` is unexpected not allow any `feature` value.
While doing this, I took the opportunity to specialise the diagnostic a bit for the case above.
r? `@petrochenkov`
In the future Windows will enable Control-flow Enforcement Technology
(CET aka Shadow Stacks). To protect the path where the context is
updated during exception handling, the binary is required to enumerate
valid unwind entrypoints in a dedicated section which is validated when
the context is being set during exception handling.
The required support for EHCONT has already been merged into LLVM,
long ago. This change adds the Rust codegen option to enable it.
Reference:
* https://reviews.llvm.org/D40223
This also adds a new `ehcont-guard` option to the bootstrap config which
enables EHCont Guard when building std.
This was made possible by the removal of plugin support, which
simplified lint store creation.
This simplifies the places in rustc and rustdoc that call
`describe_lints`, which are early on. The lint store is now built before
those places, so they don't have to create their own lint store for
temporary use, they can just use the main one.
Add -Z llvm_module_flag
Allow adding values to the `!llvm.module.flags` metadata for a generated module. The syntax is
`-Z llvm_module_flag=<name>:<type>:<value>:<behavior>`
Currently only u32 values are supported but the type is required to be specified for forward compatibility. The `behavior` element must match one of the named LLVM metadata behaviors.viors.
This flag is expected to be perma-unstable.
Remove `-Zperf-stats`.
The included measurements have varied over the years. At one point there were quite a few more, but #49558 deleted a lot that were no longer used. Today there's just four, and it's a motley collection that doesn't seem particularly valuable.
I think it has been well and truly subsumed by self-profiling, which collects way more data.
r? `@wesleywiser`
Remove `-Zkeep-hygiene-data`.
It was added way back in #28585 under the name `-Zkeep-mtwt-tables`. The justification was:
> This is so that the resolution results can be used after analysis,
> potentially for tool support.
There are no uses of significance in the code base, and various Google searches for both option names (and variants) found nothing of interest. I think this can safely be removed.
r? `@davidtwco`
The included measurements have varied over the years. At one point there
were quite a few more, but #49558 deleted a lot that were no longer
used. Today there's just four, and it's a motley collection that doesn't
seem particularly valuable.
I think it has been well and truly subsumed by self-profiling, which
collects way more data.
Allow adding values to the `!llvm.module.flags` metadata for a generated
module. The syntax is
`-Z llvm_module_flag=<name>:<type>:<value>:<behavior>`
Currently only u32 values are supported but the type is required to be
specified for forward compatibility. The `behavior` element must match
one of the named LLVM metadata behaviors.viors.
This flag is expected to be perma-unstable.
Add `std:#️⃣:{DefaultHasher, RandomState}` exports (needs FCP)
This implements rust-lang/libs-team#267 to move the libstd hasher types to `std::hash` where they belong, instead of `std::collections::hash_map`.
<details><summary>The below no longer applies, but is kept for clarity.</summary>
This is a small refactor for #27242, which moves the definitions of `RandomState` and `DefaultHasher` into `std::hash`, but in a way that won't be noticed in the public API.
I've opened rust-lang/libs-team#267 as a formal ACP to move these directly into the root of `std::hash`, but for now, they're at least separated out from the collections code in a way that will make moving that around easier.
I decided to simply copy the rustdoc for `std::hash` from `core::hash` since I think it would be ideal for the two to diverge longer-term, especially if the ACP is accepted. However, I would be willing to factor them out into a common markdown document if that's preferred.
</details>
It was added way back in #28585 under the name `-Zkeep-mtwt-tables`. The
justification was:
> This is so that the resolution results can be used after analysis,
> potentially for tool support.
There are no uses of significance in the code base, and various Google
searches for both option names (and variants) found nothing of interest.
@petrochenkov says removing this part (and it's only part) of the
hygiene data is dubious. It doesn't seem that big, so let's just keep it
around.
It currently has the syntax
`current_rustc_version!(env!("CFG_RELEASE"))` where the
`env!("CFG_RELEASE")` part looks like a normal expression but it is
actually parsed and processed by the `current_rustc_version` macro.
The documented rationale for this is that you'll find it if you grep for
`env!("CFG_RELEASE")`. But I think that's of very little use -- I would
personally grep for just "CFG_RELEASE" -- and it complicates the macro,
requiring the use of `syn`.
This commit simplifies the macro.
It was stabilized as `-C strip` in November 2021. The unstable option
was kept around as a temporary measure to ease the transition. Two years
is more than enough!
Add -Zcross-crate-inline-threshold=yes
``@thomcc`` says this would be useful for
> seeing if it makes a difference in some code if i do it when building the sysroot, since -Zbuild-std + lto helps more than it seems like it should
And I've changed the possible values as a reference to ``@Manishearth`` saying
> LLVM's inlining heuristic is "yes".
Remove support for alias `-Z symbol-mangling-version`
(This is very similar to the removal of `-Z instrument-coverage` in #117111.)
`-C symbol-mangling-version` was stabilized back in rustc 1.59.0 (2022-02-24) via #90128, with the old unstable flag kept around (with a warning) as an alias to ease migration.
use global cache when computing proof trees
we're writing the solver while relying on the existence of the global cache to avoid exponential blowup. By disabling the global cache when building proof trees, it is easy to get hangs, e.g. when computing intercrate ambiguity causes.
Removes the unstable `-Zdump_solver_proof_tree_use_cache` option, as we now always return a full proof tree.
r? `@compiler-errors`
Most notably, this commit changes the `pub use crate::*;` in that file
to `use crate::*;`. This requires a lot of `use` items in other crates
to be adjusted, because everything defined within `rustc_span::*` was
also available via `rustc_span::source_map::*`, which is bizarre.
The commit also removes `SourceMap::span_to_relative_line_string`, which
is unused.
- Sort dependencies and features sections.
- Add `tidy` markers to the sorted sections so they stay sorted.
- Remove empty `[lib`] sections.
- Remove "See more keys..." comments.
Excluded files:
- rustc_codegen_{cranelift,gcc}, because they're external.
- rustc_lexer, because it has external use.
- stable_mir, because it has external use.
Despite what I claimed in an earlier commit, the ordering does matter to
some degree. Using `FxIndexSet` prevents changes to the error message
order in `tests/ui/check-cfg/mix.rs`.
`parse_cfgspecs` and `parse_check_cfg` run very early, before the main
interner is running. They each use a short-lived interner and convert
all interned symbols to strings in their output data structures. Once
the main interner starts up, these data structures get converted into
new data structures that are identical except with the strings converted
to symbols.
All is not obvious from the current code, which is a mess, particularly
with inconsistent naming that obscures the parallel string/symbol data
structures. This commit clean things up a lot.
- The existing `CheckCfg` type is generic, allowing both
`CheckCfg<String>` and `CheckCfg<Symbol>` forms. This is really
useful, but it defaults to `String`. The commit removes the default so
we have to use `CheckCfg<String>` and `CheckCfg<Symbol>` explicitly,
which makes things clearer.
- Introduces `Cfg`, which is generic over `String` and `Symbol`, similar
to `CheckCfg`.
- Renames some things.
- `parse_cfgspecs` -> `parse_cfg`
- `CfgSpecs` -> `Cfg<String>`, plus it's used in more places, rather
than the underlying `FxHashSet` type.
- `CrateConfig` -> `Cfg<Symbol>`.
- `CrateCheckConfig` -> `CheckCfg<Symbol>`
- Adds some comments explaining the string-to-symbol conversions.
- `to_crate_check_config`, which converts `CheckCfg<String>` to
`CheckCfg<Symbol>`, is inlined and removed and combined with the
overly-general `CheckCfg::map_data` to produce
`CheckCfg::<String>::intern`.
- `build_configuration` now does the `Cfg<String>`-to-`Cfg<Symbol>`
conversion, so callers don't need to, which removes the need for
`to_crate_config`.
The diff for two of the fields in `Config` is a good example of the
improved clarity:
```
- pub crate_cfg: FxHashSet<(String, Option<String>)>,
- pub crate_check_cfg: CheckCfg,
+ pub crate_cfg: Cfg<String>,
+ pub crate_check_cfg: CheckCfg<String>,
```
Compare that with the diff for the corresponding fields in `ParseSess`,
and the relationship to `Config` is much clearer than before:
```
- pub config: CrateConfig,
- pub check_config: CrateCheckConfig,
+ pub config: Cfg<Symbol>,
+ pub check_config: CheckCfg<Symbol>,
```
The value of `-Cinstrument-coverage=` doesn't need to be `Option`
(Extracted from #117199, since this is a purely internal cleanup that can land independently.)
Not using this flag is identical to passing `-Cinstrument-coverage=off`, so there's no need to distinguish between `None` and `Some(Off)`.
Stop telling people to submit bugs for internal feature ICEs
This keeps track of usage of internal features, and changes the message to instead tell them that using internal features is not supported.
I thought about several ways to do this but now used the explicit threading of an `Arc<AtomicBool>` through `Session`. This is not exactly incremental-safe, but this is fine, as this is set during macro expansion, which is pre-incremental, and also only affects the output of ICEs, at which point incremental correctness doesn't matter much anyways.
See [MCP 620.](https://github.com/rust-lang/compiler-team/issues/596)
This keeps track of usage of internal features, and changes the message
to instead tell them that using internal features is not supported.
See MCP 620.
Location-insensitive polonius: consider a loan escaping if an SCC has member constraints applied only
The location-insensitive analysis considered loans to escape if there were member constraints, which makes *some* sense for scopes and matches the scopes that NLL computes on all the tests.
However, polonius and NLLs differ on the fuzzed case #116657, where an SCC has member constraints but no applied ones (and is kinda surprising). The existing UI tests with member constraints impacting scopes all have some constraint applied.
This PR changes the location-insensitive analysis to consider a loan to escape if there are applied member constraints, and for extra paranoia/insurance via fuzzing and crater: actually checks the constraint's min choice is indeed a universal region as we expect. (This could be turned into a `debug_assert` and early return as a slight optimization after these periods of verification)
The 4 UI tests where member constraints are meaningful for computing scopes still pass obviously, and this also fixes#116657.
r? `@matthewjasper`
Implement rustc part of RFC 3127 trim-paths
This PR implements (or at least tries to) [RFC 3127 trim-paths](https://github.com/rust-lang/rust/issues/111540), the rustc part. That is `-Zremap-path-scope` with all of it's components/scopes.
`@rustbot` label: +F-trim-paths
Add `Config::hash_untracked_state` callback
For context, I'm looking to use [late module passes](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_lint/context/struct.LintStore.html#structfield.late_module_passes) in Clippy which unlike regular late passes run incrementally per module
However we have a config file which can change between runs, we need changes to that to invalidate the `lint_mod` query. This PR adds a side channel for us to hash some extra state into `Options` in order to do that
This does not make any changes to Clippy, I plan to do that in a PR to the Clippy repo along with some other required changes
An alternative implementation would be to add a new query to track this state and override the `lint_mod` query in Clippy to first call that
cc `@rust-lang/clippy`
It's a better name, and lets "active features" refer to the features
that are active in a particular program, due to being declared or
enabled by the edition.
The commit also renames `Features::enabled` as `Features::active` to
match this; I changed my mind and have decided that "active" is a little
better thatn "enabled" for this, particularly because a number of
pre-existing comments use "active" in this way.
Finally, the commit renames `Status::Stable` as `Status::Accepted`, to
match `ACCEPTED_FEATURES`.
Streamline `rustc_driver_impl` pretty-printing.
This PR simplifies a lot of unnecessary structure in
`rustc_driver_impl/src/pretty.rs`. It removes some traits and functions,
simplifies some structs, renames some things for increased consistency, and
eliminates some boilerplate code. Overall it cuts more than 150 lines of code.
r? `@compiler-errors`
Remove cgu_reuse_tracker from Session
This removes a bit of global mutable state.
It will now miss post-lto cgu reuse when ThinLTO determines that a cgu doesn't get changed, but there weren't any tests for this anyway and a test for it would be fragile to the exact implementation of ThinLTO in LLVM.
Compute NLL loan scopes using the polonius model
For a *location-insensitive* analysis (that is, without expressiveness improvements for users yet), this PR implements loans going out of scope using reachability and liveness, rather than checking if the issuing region's values contain a given CFG point. This is equivalent to NLL scopes and computes the same data.
r? `@matthewjasper`
A couple of notes:
- there are some assumptions about SCC representatives, placeholders, free regions, and member constraints that I believe hold, and they're documented in the code
- this passes all the UI tests with `-Zpolonius=next` -- the perf is [not terrible](https://github.com/rust-lang/rust/pull/112432#issuecomment-1749685862) and there are a bunch of ways to improve it in the future.
- there's a fixme left, hopefully Matthew you know a clean way to get the information it mentions.
Implement `-Clink-self-contained=-linker` opt out
This implements the `-Clink-self-contained` opt out necessary to switch to lld by changing rustc's defaults instead of cargo's.
Components that are enabled and disabled on the CLI are recorded, for the purpose of being merged with the ones which the target spec will declare (I'll open another PR for that tomorrow, for easier review).
For MCP510, we now check whether using the self-contained linker is disabled on the CLI. Right now it would only be sensible to with `-Zgcc-ld=lld` (and I'll add some checks that we don't both enable and disable a component on the CLI in a future PR), but the goal is to simplify adding the check of the target's enabled components here in the follow-up PRs.
r? `@petrochenkov`
[breaking change] Validate crate name in `--extern` [MCP 650]
Reject non-ASCII-identifier crate names passed to the CLI option `--extern` (`rustc`, `rustdoc`).
Implements [MCP 650](https://github.com/rust-lang/compiler-team/issues/650) (except that we only allow ASCII identifiers not arbitrary Rust identifiers).
Fixes#113035.
[As mentioned on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Disallow.20non-identifier-valid.20--extern.20cr.E2.80.A6.20compiler-team.23650/near/376826988), doing a crater run probably doesn't make sense since it wouldn't yield anything. Most users don't interact with `rustc` directly but only ever through Cargo which always passes a valid crate name to `--extern` when it invokes `rustc` and `rustdoc`. In any case, the user wouldn't be able to use such a crate name in the source code anyway.
Note that I'm not using [`rustc_session::output::validate_crate_name`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_session/output/fn.validate_crate_name.html) (used for `--crate-name` and `#![crate_name]`) since the latter doesn't reject non-ASCII crate names and ones that start with a digit.
As an aside, I've also thought about getting rid of `validate_crate_name` entirely in a separate PR (with another MCP) in favor of `is_ascii_ident` to reject more weird `--crate-name`s, `#![crate_name]`s and file names but I think that would lead to a lot of actual breakage, namely because of file names starting with a digit. In `tests/ui` 9 tests would be impacted for example.
CC `@estebank`
r? `@est31`
Avoid blessing cargo deps's source code in ui tests
Before this PR, the source code of dependencies was included in UI test error messages whenever possible. Unfortunately, "whenever possible" means in some cases the source code wouldn't be injected, resulting in a test failure.
One such case is when `$CARGO_HOME` is remapped to something that is not present on disk [^1]. As the remapped path doesn't exist on disk, the source code wouldn't be showed in `tests/ui/issues/issue-21763.rs`:
```diff
= note: required for `hashbrown::raw::RawTable<(Rc<()>, Rc<()>)>` to implement `Send`
note: required because it appears within the type `HashMap<Rc<()>, Rc<()>, RandomState>`
--> $HASHBROWN_SRC_LOCATION
- |
-LL | pub struct HashMap<K, V, S = DefaultHashBuilder, A: Allocator + Clone = Global> {
- | ^^^^^^^
note: required because it appears within the type `HashMap<Rc<()>, Rc<()>>`
--> $SRC_DIR/std/src/collections/hash/map.rs:LL:COL
note: required by a bound in `foo`
```
This PR fixes the problem by always hiding dependencies source code in the error messages generated during UI tests. This is implemented with a new internal flag, `-Z ignore-directory-in-diagnostics-source-blocks=$path`, which compiletest passes during UI tests. Once this is merged, remapping the Cargo home will be supported.
This PR is best reviewed commit-by-commit.
[^1]: After being puzzled for a bit, I discovered why this never impacted `rust-lang/rust`: we don't remap `$CARGO_HOME` 😅. Instead, we set `$CARGO_HOME` to `/cargo` in CI, which sort-of-but-not-really achieves the same effect.
Make `.rmeta` file in `dep-info` have correct name (`lib` prefix)
Since `filename_for_metadata()` and
`OutputFilenames::path(OutputType::Metadata)` had different logic for the name of the metadata file, the `.d` file contained a file name different from the actual name used. Share the logic to fix the out-of-sync name.
Without this fix, the `.d` file contained
dash-separated_something-extra.rmeta: dash-separated.rs
instead of
libdash_separated_something-extra.rmeta: dash-separated.rs
which is the name of the file that is actually written by the compiler.
Worth noting: It took me several iterations to get all tests to pass, so I am relatively confident that this PR does not break anything.
Closes#68839
Enable incremental-relative-spans by default.
This was enabled on nightly in https://github.com/rust-lang/rust/pull/84762.
It has been a while, without obvious bugs. It's time to enable it by default for incremental runs.
Use `FreezeLock` for `CStore`
This uses `FreezeLock` to protect the `CStore`. `FreezeReadGuard` and `FreezeWriteGuard` are changed to support a `map` operation.
r? `@oli-obk`
Abort if check nightly options failed on stable
Fixes#115680
Also, if there are multiple unstable options passing on stable compiler, printing multiple same `note` and `help` seems noisy.
LLVM already supports emitting compressed debuginfo. In debuginfo=full
builds, the debug section is often a large amount of data, and it
typically compresses very well (3x is not unreasonable.) We add a new
knob to allow debuginfo to be compressed when the matching LLVM
functionality is present. Like clang, if a known-but-disabled
compression mechanism is requested, we disable compression and emit
uncompressed debuginfo sections.
The API is different enough on older LLVMs we just pretend the support
is missing on LLVM older than 16.
Add CL and CMD into to pdb debug info
Partial fix for https://github.com/rust-lang/rust/issues/96475
The Arg0 and CommandLineArgs of the MCTargetOptions cpp class are not set within bb548f9645/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp (L378)
This causes LLVM to not neither output any compiler path (cl) nor the arguments that were used when invoking it (cmd) in the PDB file.
This fix adds the missing information to the target machine so LLVM can use it.
Stabilize `PATH` option for `--print KIND=PATH`
This PR propose stabilizing the `PATH` option for `--print KIND=PATH`. This option was previously added in https://github.com/rust-lang/rust/pull/113780 (as insta-stable before being un-stablized in https://github.com/rust-lang/rust/pull/114139).
Description of the `PATH` option:
> A filepath may optionally be specified for each requested information kind, in the format `--print KIND=PATH`, just like for `--emit`. When a path is specified, information will be written there instead of to stdout.
------
Description of the original PR [\[link\]](https://github.com/rust-lang/rust/pull/113780#issue-1807080607):
> **Support --print KIND=PATH command line syntax**
>
> As is already done for `--emit KIND=PATH` and `-L KIND=PATH`.
>
> In the discussion of https://github.com/rust-lang/rust/pull/110785, it was pointed out that `--print KIND=PATH` is nicer than trying to apply the single global `-o path` to `--print`'s output, because in general there can be multiple print requests within a single rustc invocation, and anyway `-o` would already be used for a different meaning in the case of `link-args` and `native-static-libs`.
>
> I am interested in using `--print cfg=PATH` in Buck2. Currently Buck2 works around the lack of support for `--print KIND=PATH` by [indirecting through a Python wrapper script](d43cf3a51a/prelude/rust/tools/get_rustc_cfg.py) to redirect rustc's stdout into the location dictated by the build system.
>
> From skimming Cargo's usages of `--print`, it definitely seems like it would benefit from `--print KIND=PATH` too. Currently it is working around the lack of this by inserting `--crate-name=___ --print=crate-name` so that it can look for a line containing `___` as a delimiter between the 2 other `--print` informations it actually cares about. This is commented as a "HACK" and "abuse". 31eda6f7c3/src/cargo/core/compiler/build_context/target_info.rs (L242)
-----
cc `@dtolnay`
r? `@jackh726`
Description of the `PATH` option:
> A filepath may optionally be specified for each requested information
> kind, in the format `--print KIND=PATH`, just like for `--emit`. When
> a path is specified, information will be written there instead of to
> stdout.
Since `filename_for_metadata()` and
`OutputFilenames::path(OutputType::Metadata)` had different logic for
the name of the metadata file, the `.d` file contained a file name
different from the actual name used. Share the logic to fix the
out-of-sync name.
Closes 68839.
Add an (perma-)unstable option to disable vtable vptr
This flag is intended for evaluation of trait upcasting space cost for embedded use cases.
Compared to the approach in #112355, this option provides a way to evaluate end-to-end cost of trait upcasting. Rationale: https://github.com/rust-lang/rust/issues/112355#issuecomment-1658207769
## How this flag should be used (after merge)
Build your project with and without `-Zno-trait-vptr` flag. If you are using cargo, set `RUSTFLAGS="-Zno-trait-vptr"` in the environment variable. You probably also want to use `-Zbuild-std` or the binary built may be broken. Save both binaries somewhere.
### Evaluate the space cost
The option has a direct and indirect impact on vtable space usage. Directly, it gets rid of the trait vptr entry needed to store a pointer to a vtable of a supertrait. (IMO) this is a small saving usually. The larger saving usually comes with the indirect saving by eliminating the vtable of the supertrait (and its parent).
Both impacts only affects vtables (notably the number of functions monomorphized should , however where vtable reside can depend on your relocation model. If the relocation model is static, then vtable is rodata (usually stored in Flash/ROM together with text in embedded scenario). If the binary is relocatable, however, the vtable will live in `.data` (more specifically, `.data.rel.ro`), and this will need to reside in RAM (which may be a more scarce resource in some cases), together with dynamic relocation info living in readonly segment.
For evaluation, you should run `size` on both binaries, with and without the flag. `size` would output three columns, `text`, `data`, `bss` and the sum `dec` (and it's hex version). As explained above, both `text` and `data` may change. `bss` shouldn't usually change. It'll be useful to see:
* Percentage change in text + data (indicating required flash/ROM size)
* Percentage change in data + bss (indicating required RAM size)
