Note that at the time of this commit, `unic-emoji-char` seems to have
data tables only up to Unicode 5.0, but Unicode is already newer than
this.
A newer emoji such as `🥺` will not be recognized as an emoji
but older emojis such as `🐱` will.
Improve unexpected close and mismatch delimiter hint in TokenTreesReader
Fixes#103882Fixes#68987Fixes#69259
The inner indentation mismatching will be covered by outer block, the new added function `report_error_prone_delim_block` will find out the error prone candidates for reporting.
Instead of `ast::Lit`.
Literal lowering now happens at two different times. Expression literals
are lowered when HIR is crated. Attribute literals are lowered during
parsing.
This commit changes the language very slightly. Some programs that used
to not compile now will compile. This is because some invalid literals
that are removed by `cfg` or attribute macros will no longer trigger
errors. See this comment for more details:
https://github.com/rust-lang/rust/pull/102944#issuecomment-1277476773
It deals with eight cases: ints, floats, and the six quoted types
(char/byte/strings). For ints and floats we have an early return, and
the other six types fall through to the code at the end, which makes the
function hard to read.
This commit rearranges things to avoid the early returns.
There are three kinds of "byte" literals: byte literals, byte string
literals, and raw byte string literals. None are allowed to have
non-ASCII chars in them.
Two `EscapeError` variants exist for when that constraint is violated.
- `NonAsciiCharInByte`: used for byte literals and byte string literals.
- `NonAsciiCharInByteString`: used for raw byte string literals.
As a result, the messages for raw byte string literals use different
wording, without good reason. Also, byte string literals are incorrectly
described as "byte constants" in some error messages.
This commit eliminates `NonAsciiCharInByteString` so the three cases are
handled similarly, and described correctly. The `mode` is enough to
distinguish them.
Note: Some existing error messages mention "byte constants" and some
mention "byte literals". I went with the latter here, because it's a
more correct name, as used by the Reference.
It's passed to numerous places where we just need an `is_byte` bool.
Passing the bool avoids the need for some assertions.
Also rename `is_bytes()` as `is_byte()`, to better match `Mode::Byte`,
`Mode::ByteStr`, and `Mode::RawByteStr`.
It's now only used in one function. Also, the "should we glue the
tokens?" check is only necessary when pushing a `TokenTree::Token`, not
when pushing a `TokenTree::Delimited`.
As part of this, we now do the "should we glue the tokens?" check
immediately, which avoids having look back at the previous token. It
also puts all the logic dealing with token gluing in a single place.
`Cursor` is currently hidden, and the main tokenization path uses
`rustc_lexer::first_token` which involves constructing a new `Cursor`
for every single token, which is weird. Also, `first_token` also can't
handle empty input, so callers have to check for that first.
This commit makes `Cursor` public, so `StringReader` can contain a
`Cursor`, which results in a simpler structure. The commit also changes
`StringReader::advance_token` so it returns an `Option<Token>`,
simplifying the the empty input case.
`TokenTreesReader` wraps a `StringReader`, but the `into_token_trees`
function obscures this. This commit moves to a more straightforward
control flow.
The spacing computation is done in two parts. In the first part
`next_token` and `bump` use `Spacing::Alone` to mean "preceded by
whitespace" and `Spacing::Joint` to mean the opposite. In the second
part `parse_token_tree_other` then adjusts the `spacing` value to mean
the usual thing (i.e. "is the following token joinable punctuation?").
This shift in meaning is very confusing and it took me some time to
understand what was going on.
This commit changes the first part to use a bool, and adds some
comments, which makes things much clearer.
`parse_token_tree` is basically a match with four arms: `Eof`,
`OpenDelim`, `CloseDelim`, and "other". It has two call sites, and at
each call site one of the arms is unreachable. It's also not inlined.
This commit removes `parse_token_tree` by splitting it into four
functions and inlining them. This avoids some repeated conditional
tests and also some non-inlined function calls on the hot path.
From 72 bytes to 12 bytes (on x86-64).
There are two parts to this:
- Changing various source code offsets from 64-bit to 32-bit. This is
not a problem because the rest of rustc also uses 32-bit source code
offsets. This means `Token` is no longer `Copy` but this causes no
problems.
- Removing the `RawStrError` from `LiteralKind`. Raw string literal
invalidity is now indicated by a `None` value within
`RawStr`/`RawByteStr`, and the new `validate_raw_str` function can be
used to re-lex an invalid raw string literal to get the `RawStrError`.
There is one very small change in behaviour. Previously, if a raw string
literal matched both the `InvalidStarter` and `TooManyHashes` cases,
the latter would override the former. This has now changed, because
`raw_double_quoted_string` now uses `?` and so returns immediately upon
detecting the `InvalidStarter` case. I think this is a slight
improvement to report the earlier-detected error, and it explains the
change in the `test_too_many_hashes` test.
The commit also removes a couple of comments that refer to #77629 and
say that the size of these types don't affect performance. These
comments are wrong, though the performance effect is small.
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
Change `span_suggestion` (and variants) to take `impl ToString` rather
than `String` for the suggested code, as this simplifies the
requirements on the diagnostic derive.
Signed-off-by: David Wood <david.wood@huawei.com>
Improve diagnostics for unterminated nested block comment
close#95283
(This is my first time try to messing around with rust compiler and might get a lot of things wrong... 🙇 )
There are a few places were we have to construct it, though, and a few
places that are more invasive to change. To do this, we create a
constructor with a long obvious name.
i'd guess about 70% of "bad escape" cases occur when someone meant to
use a raw string literal because they're passing it directly to
Regex::new(). this emits an advisory (Applicability::MaybeIncorrect)
help: suggestion to the user that they use an r"" string,
on top of the normal notes about looking at the
string literal documentation/spec.
Suggest `br` if the unknown string prefix `rb` is found
Currently, for the following code:
```rust
fn main() {
rb"abc";
}
```
we issue the following suggestion:
```
help: consider inserting whitespace here
|
2 | rb "abc";
| --
```
With my changes (only in edition 2021, where unknown prefixes became an error), I get:
```
help: use `br` for a raw byte string
|
2 | br"abc";
| ^^
```
