Introduce support for `async` bound modifier on `Fn*` traits
Adds `async` to the list of `TraitBoundModifiers`, which instructs AST lowering to map the trait to an async flavor of the trait. For now, this is only supported for `Fn*` to `AsyncFn*`, and I expect that this manual mapping via lang items will be replaced with a better system in the future.
The motivation for adding these bounds is to separate the users of async closures from the exact trait desugaring of their callable bounds. Instead of users needing to be concerned with the `AsyncFn` trait, they should be able to write `async Fn()` and it will desugar to whatever underlying trait we decide is best for the lowering of async closures.
Note: rustfmt support can be done in the rustfmt repo after a subtree sync.
pattern_analysis: Gracefully abort on type incompatibility
This leaves the option for a consumer of the crate to return `Err` instead of panicking on type error. rust-analyzer could use that (e.g. https://github.com/rust-lang/rust-analyzer/issues/15808).
Since the only use of `TypeCx::bug` is in `Constructor::is_covered_by`, it is tempting to return `false` instead of `Err()`, but that would cause "non-exhaustive match" false positives.
r? `@compiler-errors`
Rollup of 8 pull requests
Successful merges:
- #113833 (`std::error::Error` -> Trait Implementations: lifetimes consistency improvement)
- #115386 (PartialEq, PartialOrd: update and synchronize handling of transitive chains)
- #116284 (make matching on NaN a hard error, and remove the rest of illegal_floating_point_literal_pattern)
- #118960 (Add LocalWaker and ContextBuilder types to core, and LocalWake trait to alloc.)
- #120384 (Use `<T, U>` for array/slice equality `impl`s)
- #120518 (riscv only supports split_debuginfo=off for now)
- #120657 (Remove unused struct)
- #120661 (target: default to the medium code model on LoongArch targets)
r? `@ghost`
`@rustbot` modify labels: rollup
All the other `emit`/`emit_diagnostic` methods were recently made
consuming (e.g. #119606), but this one wasn't. But it makes sense to.
Much of this is straightforward, and lots of `clone` calls are avoided.
There are a couple of tricky bits.
- `Emitter::primary_span_formatted` no longer takes a `Diagnostic` and
returns a pair. Instead it takes the two fields from `Diagnostic` that
it used (`span` and `suggestions`) as `&mut`, and modifies them. This
is necessary to avoid the cloning of `diag.children` in two emitters.
- `from_errors_diagnostic` is rearranged so various uses of `diag` occur
before the consuming `emit_diagnostic` call.
target: default to the medium code model on LoongArch targets
The Rust LoongArch targets have been using the default LLVM code model so far, which is "small" in LLVM-speak and "normal" in LoongArch-speak. As [described][1] in the "Code Model" section of LoongArch ELF psABI spec v20231219, one can only make function calls as far as ±128MiB with the "normal" code model; this is insufficient for very large software containing Rust components that needs to be linked into the big text section, such as Chromium.
Because:
* we do not want to ask users to recompile std if they are to build such software,
* objects compiled with larger code models can be linked with those with smaller code models without problems, and
* the "medium" code model is comparable to the "small"/"normal" one performance-wise (same data access pattern; each function call becomes 2-insn long and indirect, but this may be relaxed back into the direct 1-insn form in a future LLVM version), but is able to perform function calls within ±128GiB,
it is better to just switch the targets to the "medium" code model, which is also "medium" in LLVM-speak.
[1]: https://github.com/loongson/la-abi-specs/blob/v2.30/laelf.adoc#code-models
riscv only supports split_debuginfo=off for now
Disable packed/unpacked options for riscv linux/android. Other riscv targets already only have the off option.
The packed/unpacked options might be supported in the future. See upstream issue for more details:
https://github.com/llvm/llvm-project/issues/56642Fixes#110224
make matching on NaN a hard error, and remove the rest of illegal_floating_point_literal_pattern
These arms would never be hit anyway, so the pattern makes little sense. We have had a future-compat lint against float matches in general for a *long* time, so I hope we can get away with immediately making this a hard error.
This is part of implementing https://github.com/rust-lang/rfcs/pull/3535.
Closes https://github.com/rust-lang/rust/issues/41620 by removing the lint.
https://github.com/rust-lang/reference/pull/1456 updates the reference to match.
PartialEq, PartialOrd: update and synchronize handling of transitive chains
It was brought up in https://internals.rust-lang.org/t/total-equality-relations-as-std-eq-rhs/19232 that we currently have a gap in our `PartialEq` rules, which this PR aims to close:
> For example, with PartialEq's conditions you may have a = b = c = d ≠ a (where a and c are of type A, b and d are of type B).
The second commit fixes https://github.com/rust-lang/rust/issues/87067 by updating PartialOrd to handle the requirements the same way PartialEq does.
`std::error::Error` -> Trait Implementations: lifetimes consistency improvement
This cleans up `std::error::Error` trait implementations lifetime inconsistency (`'static` -> `'a`)
**Reasoning:**
Trait implementations for `std::error::Error`, like:
`impl From<&str> for Box<dyn Error + 'static, Global>`
`impl<'a> From<&str> for Box<dyn Error + Sync + Send + 'a, Global>`
use different lifetime annotations misleadingly implying using different life annotations here is a conscious, nonaccidental decision.
[(Related forum discussion here)](https://users.rust-lang.org/t/confusing-std-error-source-code/97011/5?u=wiktor)
The Rust LoongArch targets have been using the default LLVM code model
so far, which is "small" in LLVM-speak and "normal" in LoongArch-speak.
As described in the "Code Model" section of LoongArch ELF psABI spec
v20231219 [1], one can only make function calls as far as ±128MiB with
the "normal" code model; this is insufficient for very large software
containing Rust components that needs to be linked into the big text
section, such as Chromium.
Because:
* we do not want to ask users to recompile std if they are to build
such software,
* objects compiled with larger code models can be linked with those
with smaller code models without problems, and
* the "medium" code model is comparable to the "small"/"normal" one
performance-wise (same data access pattern; each function call
becomes 2-insn long and indirect, but this may be relaxed back into
the direct 1-insn form in a future LLVM version), but is able to
perform function calls within ±128GiB,
it is better to just switch the targets to the "medium" code model,
which is also "medium" in LLVM-speak.
[1]: https://github.com/loongson/la-abi-specs/blob/v2.30/laelf.adoc#code-models
rustdoc: trait.impl, type.impl: sort impls to make it not depend on serialization order
Can be tested by running `cargo doc` with different rust versions on some crate and comparing `doc` folders: files in `trait.impl` and `type.impl` will sometimes have different order of impls.
fix#120603 by adding a check in default_read_buf
Fixes#120603 by checking the returned read n is in-bounds of the cursor.
Interestingly, I noticed that `BorrowedBuf` side-steps this issue by using checked accesses. Maybe this can be switched to unchecked to mirror what BufReader does bf3c6c5bed/library/core/src/io/borrowed_buf.rs (L95)
coverage: Improve handling of function/closure spans
This is a combination of some loosely-related changes that touch the same code:
1. Make unexpansion of closure bodies more precise, by unexpanding back to the context of the closure declaration, instead of unexpanding all the way back to the top-level context. This preserves the way we handle async desugaring and closures containing a single bang-macro, while also giving better results for closures defined in macros.
2. Skip the normal span-refinement code when dealing with the trivial outer part of an async function.
3. Be more explicit about the fact that `fn_sig_span` has been extended to the start of the function body, and is not necessarily present.
---
`@rustbot` label +A-code-coverage
Clarify ambiguity in select_nth_unstable docs
Original docs for `select_nth_unstable` family of functions were ambiguous as to whether "the element at `index`" was the element at `index` before the function reordered the elements or after the function reordered the elements.
The most helpful change in this PR is to change the given examples to make this absolutely clear. Before, "the element at `index`" was the same value before and after the reordering, so it didn't help disambiguate the meaning. I've changed the example for `select_nth_unstable` and `select_nth_unstable_by` so that "the element at `index`" is different before and after the reordering, which clears up the ambiguity. The function `select_nth_unstable_by_key` already had an example that was unambiguous.
In an attempt to clear up the ambiguity from the get-go, I've added a bit of redundancy to the text. Now the docs refer to "the element at `index` *after the reordering*".
Move predicate, region, and const stuff into their own modules in middle
This PR mostly moves things around, and in a few cases adds some `ty::` to the beginning of names to avoid one-off imports.
I don't mean this to be the most *thorough* move/refactor. I just generally wanted to begin to split up `ty/mod.rs` and `ty/sty.rs` which are huge and hard to distinguish, and have a lot of non-ty stuff in them.
r? lcnr
This sidesteps the normal span refinement code in cases where we know that we
are only dealing with the special signature span that represents having called
an async function.
The two kinds of delayed bug have quite different semantics so a
stronger conceptual separation is nice. (`is_error` is a good example,
because the two kinds have different behaviour.)
The commit also moves the `DelayedBug` variant after `Error` in `Level`,
to reflect the fact that it's weaker than `Error` -- it might trigger an
error but also might not. (The pre-existing `downgrade_to_delayed_bug`
function also reflects the notion that delayed bugs are lower/after
normal errors.)
Plus it condenses some of the comments on `Level` into a table, for
easier reading, and introduces `can_be_top_or_sub` to indicate which
levels can be used in top-level diagnostics vs. subdiagnostics.
Finally, it renames `DiagCtxtInner::span_delayed_bugs` as
`DiagCtxtInner::delayed_bugs`. The `span_` prefix is unnecessary because
some delayed bugs don't have a span.
- Combine two different blocks involving
`diagnostic.level.get_expectation_id()` into one.
- Combine several `if`s involving `diagnostic.level` into a single
`match`.
This requires reordering some of the operations, but this has no
functional effect.
Rollup of 8 pull requests
Successful merges:
- #119759 (Add FileCheck annotations to dataflow-const-prop tests)
- #120323 (On E0277 be clearer about implicit `Sized` bounds on type params and assoc types)
- #120473 (Only suggest removal of `as_*` and `to_` conversion methods on E0308)
- #120540 (add test for try-block-in-match-arm)
- #120547 (`#![feature(inline_const_pat)]` is no longer incomplete)
- #120552 (Correctly check `never_type` feature gating)
- #120555 (put pnkfelix (me) back on the review queue.)
- #120556 (Improve the diagnostics for unused generic parameters)
r? `@ghost`
`@rustbot` modify labels: rollup
