The liveness uses a mixed representation of RWUs based on the
observation that most of them have invalid reader and invalid
writer. The packed variant uses 32 bits and unpacked 96 bits.
Unpacked data contains reader live node and writer live node.
Since live nodes are used only to determine their validity,
RWUs can always be stored in a packed form with four bits for
each: reader bit, writer bit, used bit, and one extra padding
bit to simplify packing and unpacking operations.
A slightly clearer diagnostic when misusing const
Fixes#79598
This produces the following diagnostic:
"expected one of `>`, a const expression, lifetime, or type, found keyword `const`"
Instead of the previous, more confusing:
"expected one of `>`, const, lifetime, or type, found keyword `const`"
This might not be completely clear as some users might not understand what a const expression is, but I do believe this is an improvement.
check the recursion limit when finding a struct's tail
fixes#79437
This does a `delay_span_bug` (via `ty_error_with_message`) rather than emit a new error message, under the assumption that there will be an error elsewhere (even if the type isn't infinitely recursive, just deeper than the recursion limit, this appears to be the case).
Fixes#79661
In incremental compilation mode, we update a `DefPathHash -> DefId`
mapping every time we create a `DepNode` for a foreign `DefId`.
This mapping is written out to the on-disk incremental cache, and is
read by the next compilation session to allow us to lazily decode
`DefId`s.
When we decode a `DepNode` from the current incremental cache, we need
to ensure that any previously-recorded `DefPathHash -> DefId` mapping
gets recorded in the new mapping that we write out. However, PR #74967
didn't do this in all cases, leading to us being unable to decode a
`DefPathHash` in certain circumstances.
This PR refactors some of the code around `DepNode` deserialization to
prevent this kind of mistake from happening again.
Fix perf regression caused by #79284https://github.com/rust-lang/rust/pull/79284 only moved code around but this changed inlining and caused a large perf regression. This fixes it for me, though I'm less confident than usual because the regression was not observable with my usual (i.e. incremental) compilation settings.
r? `@Mark-Simulacrum`
Coverage tests for remaining TerminatorKinds and async, improve Assert
Tested and validate results for panic unwind, panic abort, assert!()
macro, TerminatorKind::Assert (for example, numeric overflow), and
async/await.
Implemented a previous documented idea to change Assert handling to be
the same as FalseUnwind and Goto, so it doesn't get its own
BasicCoverageBlock anymore. This changed a couple of coverage regions,
but I validated those changes are not any worse than the prior results,
and probably help assure some consistency (even if some people might
disagree with how the code region is consistently computed).
Fixed issue with async/await. AggregateKind::Generator needs to be
handled like AggregateKind::Closure; coverage span for the outer async
function should not "cover" the async body, which is actually executed
in a separate "closure" MIR.
Fix some clippy lints
Happy to revert these if you think they're less readable, but personally I like them better now (especially the `else { if { ... } }` to `else if { ... }` change).
Added one more test (two files) showing coverage of generics and unused
functions across crates.
Created and referenced new Issues, as requested.
Added comments.
Added a note about the possible effects of compiler options on LLVM
coverage maps.
Fixes multiple issue with counters, with simplification
Includes a change to the implicit else span in ast_lowering, so coverage
of the implicit else no longer spans the `then` block.
Adds coverage for unused closures and async function bodies.
Fixes: #78542
Adding unreachable regions for known MIR missing from coverage map
Cleaned up PR commits, and removed link-dead-code requirement and tests
Coverage no longer depends on Issue #76038 (`-C link-dead-code` is
no longer needed or enforced, so MSVC can use the same tests as
Linux and MacOS now)
Restrict adding unreachable regions to covered files
Improved the code that adds coverage for uncalled functions (with MIR
but not-codegenned) to avoid generating coverage in files not already
included in the files with covered functions.
Resolved last known issue requiring --emit llvm-ir workaround
Fixed bugs in how unreachable code spans were added.
Tested and validate results for panic unwind, panic abort, assert!()
macro, TerminatorKind::Assert (for example, numeric overflow), and
async/await.
Implemented a previous documented idea to change Assert handling to be
the same as FalseUnwind and Goto, so it doesn't get its own
BasicCoverageBlock anymore. This changed a couple of coverage regions,
but I validated those changes are not any worse than the prior results,
and probably help assure some consistency (even if some people might
disagree with how the code region is consistently computed).
Fixed issue with async/await. AggregateKind::Generator needs to be
handled like AggregateKind::Closure; coverage span for the outer async
function should not "cover" the async body, which is actually executed
in a separate "closure" MIR.
Fix `unknown-crate` when using -Z self-profile with rustdoc
... by removing a duplicate `crate_name` field in `interface::Config`,
making it clear that rustdoc should be passing it to `config::Options` instead.
Unblocks https://github.com/rust-lang/rustc-perf/issues/797.
Revert "Auto merge of #79209
r? `@nikomatsakis`
This has caused some issues (#79560) so better to revert and try to come up with a proper fix without rush.
Do not show negative polarity trait implementations in diagnostic messages for similar implementations
This fixes#79458.
Previously, this code:
```rust
#[derive(Clone)]
struct Foo<'a, T> {
x: &'a mut T,
}
```
would have suggested that `<&mut T as Clone>` was an implementation that was found. This is due to the fact that the standard library now has `impl<'_, T> !Clone for &'_ mut T`, and explicit negative polarity implementations were not filtered out in diagnostic output when suggesting similar implementations.
This PR fixes this issue by filtering out negative polarity trait implementations in `find_similar_impl_candidates` within `rustc_trait_selection::traits::error_reporting::InferCtxtPrivExt<'tcx>`. It also adds a UI regression test for this issue and fixes UI tests that had incorrectly been modified to expect the invalid output.
r? `@scottmcm`
Use true previous lint level when detecting overriden forbids
Previously, cap-lints was ignored when checking the previous forbid level, which
meant that it was a hard error to do so. This is different from the normal
behavior of lints, which are silenced by cap-lints; if the forbid would not take
effect regardless, there is not much point in complaining about the fact that we
are reducing its level.
It might be considered a bug that even `--cap-lints deny` would suffice to
silence the error on overriding forbid, depending on if one cares about failing
the build or precisely forbid being set. But setting cap-lints to deny is quite
odd and not really done in practice, so we don't try to handle it specially.
This also unifies the code paths for nested and same-level scopes. However, the
special case for CLI lint flags is left in place (introduced by #70918) to fix
the regression noted in #70819. That means that CLI flags do not lint on forbid
being overridden by a non-forbid level. It is unclear whether this is a bug or a
desirable feature, but it is certainly inconsistent. CLI flags are a
sufficiently different "type" of place though that this is deemed out of scope
for this commit.
r? `@pnkfelix` perhaps?
cc #77713 -- not marking as "Fixes" because of the lack of proper unused attribute handling in this PR
Warn if `dsymutil` returns an error code
This checks the error code returned by `dsymutil` and warns if it failed. It
also provides the stdout and stderr logs from `dsymutil`, similar to the native
linker step.
I tried to think of ways to test this change, but so far I haven't found a good way, as you'd likely need to inject some nonsensical args into `dsymutil` to induce failure, which feels too artificial to me. Also, https://github.com/rust-lang/rust/issues/79361 suggests Rust is on the verge of disabling `dsymutil` by default, so perhaps it's okay for this change to be untested. In any case, I'm happy to add a test if someone sees a good approach.
Fixes https://github.com/rust-lang/rust/issues/78770
Add wasm32 support to inline asm
There is some contention around inline asm and wasm, and I really only made this to figure out the process of hacking on rustc, but I figured as long as the code existed, it was worth uploading.
cc `@Amanieu`
Implement lazy decoding of DefPathTable during incremental compilation
PR https://github.com/rust-lang/rust/pull/75813 implemented lazy decoding of the `DefPathTable` from crate metadata. However, it requires decoding the entire `DefPathTable` when incremental compilation is active, so that we can map a decoded `DefPathHash` to a `DefId` from an arbitrary crate.
This PR adds support for lazy decoding of dependency `DefPathTable`s when incremental compilation si active.
When we load the incremental cache and dep
graph, we need the ability to map a `DefPathHash` to a `DefId` in the
current compilation session (if the corresponding definition still
exists).
This is accomplished by storing the old `DefId` (that is, the `DefId`
from the previous compilation session) for each `DefPathHash` we need to
remap. Since a `DefPathHash` includes the owning crate, the old crate is
guaranteed to be the right one (if the definition still exists). We then
use the old `DefIndex` as an initial guess, which we validate by
comparing the expected and actual `DefPathHash`es. In most cases,
foreign crates will be completely unchanged, which means that we our
guess will be correct. If our guess is wrong, we fall back to decoding
the entire `DefPathTable` for the foreign crate. This still represents
an improvement over the status quo, since we can skip decoding the
entire `DefPathTable` for other crates (where all of our guesses were
correct).
Validate lint docs separately.
This addresses some concerns raised in https://github.com/rust-lang/rust/pull/76549#issuecomment-727638552 about errors with the lint docs being confusing and cumbersome. Errors from validating the lint documentation were being generated during `x.py doc` (and `x.py dist`), since extraction and validation are being done in a single step. This changes it so that extraction and validation are separated, so that `x.py doc` will not error if there is a validation problem, and tests are moved to `x.py test src/tools/lint-docs`.
This includes the following changes:
* Separate validation to `x.py test`.
* Added some more documentation on how to more easily modify and test the docs.
* Added more help to the error messages to hopefully provide more information on how to fix things.
The first commit just moves the code around, so you may consider looking at the other commits for a smaller diff.
Stop adding '*' at the end of slice and str typenames for MSVC case
When computing debug info for MSVC debuggers, Rust compiler emits C++ style type names for compatibility with .natvis visualizers. All Ref types are treated as equivalences of C++ pointers in this process, and, as a result, their type names end with a '\*'. Since Slice and Str are treated as Ref by the compiler, their type names also end with a '\*'. This causes the .natvis engine for WinDbg fails to display data of Slice and Str objects. We addressed this problem simply by removing the '*' at the end of type names for Slice and Str types.
Debug info in WinDbg before the fix:
Debug info in WinDbg after the fix:
This change has also been tested with debuggers for Visual Studio, VS Code C++ and VS Code LLDB to make sure that it does not affect the behavior of other kinds of debugger.
This checks the error code returned by `dsymutil` and warns if it failed. It
also provides the stdout and stderr logs from `dsymutil`, similar to the native
linker step.
Fixes https://github.com/rust-lang/rust/issues/78770
Update error to reflect that integer literals can have float suffixes
For example, `1` is parsed as an integer literal, but it can be turned
into a float with the suffix `f32`. Now the error calls them "numeric
literals" and notes that you can add a float suffix since they can be
either integers or floats.
Fix overlap detection of `usize`/`isize` range patterns
`usize` and `isize` are a bit of a special case in the match usefulness algorithm, because the range of values they contain depends on the platform. Specifically, we don't want `0..usize::MAX` to count as an exhaustive match (see also [`precise_pointer_size_matching`](https://github.com/rust-lang/rust/issues/56354)). The way this was initially implemented is by treating those ranges like float ranges, i.e. with limited cleverness. This means we didn't catch the following as unreachable:
```rust
match 0usize {
0..10 => {},
10..20 => {},
5..15 => {}, // oops, should be detected as unreachable
_ => {},
}
```
This PRs fixes this oversight. Now the only difference between `usize` and `u64` range patterns is in what ranges count as exhaustive.
r? `@varkor`
`@rustbot` label +A-exhaustiveness-checking
Don't run `resolve_vars_if_possible` in `normalize_erasing_regions`
Neither `@eddyb` nor I could figure out what this was for. I changed it to `assert_eq!(normalized_value, infcx.resolve_vars_if_possible(&normalized_value));` and it passed the UI test suite.
<details><summary>
Outdated, I figured out the issue - `needs_infer()` needs to come _after_ erasing the lifetimes
</summary>
Strangely, if I change it to `assert!(!normalized_value.needs_infer())` it panics almost immediately:
```
query stack during panic:
#0 [normalize_generic_arg_after_erasing_regions] normalizing `<str::IsWhitespace as str::pattern::Pattern>::Searcher`
#1 [needs_drop_raw] computing whether `str::iter::Split<str::IsWhitespace>` needs drop
#2 [mir_built] building MIR for `str::<impl str>::split_whitespace`
#3 [unsafety_check_result] unsafety-checking `str::<impl str>::split_whitespace`
#4 [mir_const] processing MIR for `str::<impl str>::split_whitespace`
#5 [mir_promoted] processing `str::<impl str>::split_whitespace`
#6 [mir_borrowck] borrow-checking `str::<impl str>::split_whitespace`
#7 [analysis] running analysis passes on this crate
end of query stack
```
I'm not entirely sure what's going on - maybe the two disagree?
</details>
For context, this came up while reviewing https://github.com/rust-lang/rust/pull/77467/ (cc `@lcnr).`
Possibly this needs a crater run?
r? `@nikomatsakis`
cc `@matthewjasper`
Support repr(simd) on ADTs containing a single array field
This is a squash and rebase of `@gnzlbg's` #63531
I've never actually written code in the compiler before so just fumbled my way around until it would build 😅
I imagine there'll be some work we need to do in `rustc_codegen_cranelift` too for this now, but might need some input from `@bjorn3` to know what that is.
cc `@rust-lang/project-portable-simd`
-----
This PR allows using `#[repr(simd)]` on ADTs containing a single array field:
```rust
#[repr(simd)] struct S0([f32; 4]);
#[repr(simd)] struct S1<const N: usize>([f32; N]);
#[repr(simd)] struct S2<T, const N: usize>([T; N]);
```
This should allow experimenting with portable packed SIMD abstractions on nightly that make use of const generics.
Extend doc keyword feature by allowing any ident
Part of #51315.
As suggested by ``@danielhenrymantilla`` in [this comment](https://github.com/rust-lang/rust/issues/51315#issuecomment-733879934), this PR extends `#[doc(keyword = "...")]` to allow any ident to be used as keyword. The final goal is to allow (proc-)macro crates' owners to write documentation of the keywords they might introduce.
r? ``@jyn514``
