Add more *-unwind ABI variants
The following *-unwind ABIs are now supported:
- "C-unwind"
- "cdecl-unwind"
- "stdcall-unwind"
- "fastcall-unwind"
- "vectorcall-unwind"
- "thiscall-unwind"
- "aapcs-unwind"
- "win64-unwind"
- "sysv64-unwind"
- "system-unwind"
cc `@rust-lang/wg-ffi-unwind`
Lazy type-alias-impl-trait
Previously opaque types were processed by
1. replacing all mentions of them with inference variables
2. memorizing these inference variables in a side-table
3. at the end of typeck, resolve the inference variables in the side table and use the resolved type as the hidden type of the opaque type
This worked okayish for `impl Trait` in return position, but required lots of roundabout type inference hacks and processing.
This PR instead stops this process of replacing opaque types with inference variables, and just keeps the opaque types around.
Whenever an opaque type `O` is compared with another type `T`, we make the comparison succeed and record `T` as the hidden type. If `O` is compared to `U` while there is a recorded hidden type for it, we grab the recorded type (`T`) and compare that against `U`. This makes implementing
* https://github.com/rust-lang/rfcs/pull/2515
much simpler (previous attempts on the inference based scheme were very prone to ICEs and general misbehaviour that was not explainable except by random implementation defined oddities).
r? `@nikomatsakis`
fixes#93411fixes#88236
use `fold_list` in `try_super_fold_with` for `SubstsRef`
split out from #93505 as this by itself is responsible for most of the perf improvements there
r? `@michaelwoerister`
This doesn't handle `char` because it's a bit awkward to distinguish it
from u32 at this point in codegen.
Note that for some types (like `&Struct` and `&mut Struct`),
we already apply `dereferenceable`, which implies `noundef`,
so the IR does not change.
Stabilize `-Z instrument-coverage` as `-C instrument-coverage`
(Tracking issue for `instrument-coverage`: https://github.com/rust-lang/rust/issues/79121)
This PR stabilizes support for instrumentation-based code coverage, previously provided via the `-Z instrument-coverage` option. (Continue supporting `-Z instrument-coverage` for compatibility for now, but show a deprecation warning for it.)
Many, many people have tested this support, and there are numerous reports of it working as expected.
Move the documentation from the unstable book to stable rustc documentation. Update uses and documentation to use the `-C` option.
Addressing questions raised in the tracking issue:
> If/when stabilized, will the compiler flag be updated to -C instrument-coverage? (If so, the -Z variant could also be supported for some time, to ease migrations for existing users and scripts.)
This stabilization PR updates the option to `-C` and keeps the `-Z` variant to ease migration.
> The Rust coverage implementation depends on (and automatically turns on) -Z symbol-mangling-version=v0. Will stabilizing this feature depend on stabilizing v0 symbol-mangling first? If so, what is the current status and timeline?
This stabilization PR depends on https://github.com/rust-lang/rust/pull/90128 , which stabilizes `-C symbol-mangling-version=v0` (but does not change the default symbol-mangling-version).
> The Rust coverage implementation implements the latest version of LLVM's Coverage Mapping Format (version 4), which forces a dependency on LLVM 11 or later. A compiler error is generated if attempting to compile with coverage, and using an older version of LLVM.
Given that LLVM 13 has now been released, requiring LLVM 11 for coverage support seems like a reasonable requirement. If people don't have at least LLVM 11, nothing else breaks; they just can't use coverage support. Given that coverage support currently requires a nightly compiler and LLVM 11 or newer, allowing it on a stable compiler built with LLVM 11 or newer seems like an improvement.
The [tracking issue](https://github.com/rust-lang/rust/issues/79121) and the [issue label A-code-coverage](https://github.com/rust-lang/rust/labels/A-code-coverage) link to a few open issues related to `instrument-coverage`, but none of them seem like showstoppers. All of them seem like improvements and refinements we can make after stabilization.
The original `-Z instrument-coverage` support went through a compiler-team MCP at https://github.com/rust-lang/compiler-team/issues/278 . Based on that, `@pnkfelix` suggested that this needed a stabilization PR and a compiler-team FCP.
Fix ret > 1 bound if shadowed by const
Prior to a change, it would only look at types in bounds. When it started looking for consts,
shadowing type variables with a const would cause an ICE, so now defer looking at consts only if
there are no types present.
cc ``````@compiler-errors``````
Should Fix#93553
Prior to a change, it would only look at types in bounds. When it started looking for consts,
shadowing type variables with a const would cause an ICE, so now defer looking at consts only if
there are no types present.
Temporary fix for the layout of aligned enums
Fix for the issue #92464
~~I was after this issue for quite some time now, I have a temporary fix for it.
I think the current problem is [here](e75f96763f/compiler/rustc_middle/src/ty/layout.rs (L1305-L1310)) created `tag` value might be wrong, because when I checked `min` and `max` values it's always between 0..1, which results in wrong size comparison in a few lines down below.
I think `min` and `max` values don't take `#[repr(aligned(8))]` into consideration and just act from base values assigned inside the enum. If what I am saying is true, aligned enums were created with the wrong layout for some time.~~
~~As stated in the title this is only a temporary fix and I think this needs further investigation, if someone wants to mentor it I would like to work on that too.~~ 😸
**Edit: Weird some tests fail now going to close this for now...**
**Edit2: I made it work again.**
I think I figured out the main problem of the issue, layout types of aligned enums with custom discriminant types were not handled, which resulted in confusing(such as this issue) behavior down the line, this is a kinda hacky fix for the issue.
by using an opaque type obligation to bubble up comparisons between opaque types and other types
Also uses proper obligation causes so that the body id works, because out of some reason nll uses body ids for logic instead of just diagnostics.
Return an indexmap in `all_local_trait_impls` query
The data structure previously used here required that `DefId` be `Ord`. As part of #90317, we do not want `DefId` to implement `Ord`.
Fix two incorrect "it's" (typos in comments)
Found one of these while reading the documentation online. The other came up because it's in the same file.
Make dead code check a query.
Dead code check is run for each invocation of the compiler, even if no modifications were involved.
This PR makes dead code check a query keyed on the module. This allows to skip the check when a module has not changed.
To perform this, a query `live_symbols_and_ignored_derived_traits` is introduced to encapsulate the global analysis of finding live symbols. The second query `check_mod_deathness` outputs diagnostics for each module based on this first query's results.
Continue work on associated const equality
This actually implements some more complex logic for assigning associated consts to values.
Inside of projection candidates, it now defers to a separate function for either consts or
types. To reduce amount of code, projections are now generic over T, where T is either a Type or
a Const. I can add some comments back later, but this was the fastest way to implement it.
It also now finds the correct type of consts in type_of.
---
The current main TODO is finding the const of the def id for the LeafDef.
Right now it works if the function isn't called, but once you use the trait impl with the bound it fails inside projection.
I was hoping to get some help in getting the `&'tcx ty::Const<'tcx>`, in addition to a bunch of other `todo!()`s which I think may not be hit.
r? `@oli-obk`
Updates #92827
rustc_errors: only box the `diagnostic` field in `DiagnosticBuilder`.
I happened to need to do the first change (replacing `allow_suggestions` with equivalent functionality on `Diagnostic` itself) as part of a larger change, and noticed that there's only two fields left in `DiagnosticBuilderInner`.
So with this PR, instead of a single pointer, `DiagnosticBuilder` is two pointers, which should work just as well for passing *it* by value (and may even work better wrt some operations, though probably not by much).
But anything that was already taking advantage of `DiagnosticBuilder` being a single pointer, and wrapping it further (e.g. `Result<T, DiagnosticBuilder>` w/ non-ZST `T`), ~~will probably see a slowdown~~, so I want to do a perf run before even trying to propose this.
Store def_id_to_hir_id as variant in hir_owner.
If hir_owner is Owner(_), the LocalDefId is pointing to an owner, so the ItemLocalId is 0.
If the HIR node does not exist, we store Phantom.
Otherwise, we store the HirId associated to the LocalDefId.
Related to #89278
r? `@oli-obk`
Add note suggesting that predicate may be satisfied, but is not `const`
Not sure if we should be printing this in addition to, or perhaps _instead_ of the help message:
```
help: the trait `~const Add` is not implemented for `NonConstAdd`
```
Also added `ParamEnv::is_const` and `PolyTraitPredicate::is_const_if_const` and, in a separate commit, used those in other places instead of `== hir::Constness::Const`, etc.
r? ````@fee1-dead````
If hir_owner is Owner(_), the LocalDefId is pointing to an owner, so the ItemLocalId is 0.
If the HIR node does not exist, we store Phantom.
Otherwise, we store the HirId associated to the LocalDefId.
Store a `Symbol` instead of an `Ident` in `AssocItem`
This is the same idea as #92533, but for `AssocItem` instead
of `VariantDef`/`FieldDef`.
With this change, we no longer have any uses of
`#[stable_hasher(project(...))]`
Check `const Drop` impls considering `~const` Bounds
This PR adds logic to trait selection to account for `~const` bounds in custom `impl const Drop` for types, elaborates the `const Drop` check in `rustc_const_eval` to check those bounds, and steals some drop linting fixes from #92922, thanks `@DrMeepster.`
r? `@fee1-dead` `@oli-obk` <sup>(edit: guess I can't request review from two people, lol)</sup>
since each of you wrote and reviewed #88558, respectively.
Since the logic here is more complicated than what existed, it's possible that this is a perf regression. But it works correctly with tests, and that makes me happy.
Fixes#92881
rustc_lint: Some early linting refactorings
The first one removes and renames some fields and methods from `EarlyContext`.
The second one uses the set of registered tools (for tool attributes and tool lints) in a more centralized way.
The third one removes creation of a fake `ast::Crate` from `fn pre_expansion_lint`.
Pre-expansion linting is done with per-module granularity on freshly loaded modules, and it previously synthesized an `ast::Crate` to visit non-root modules, now they are visited as modules.
The node ID used for pre-expansion linting is also made more precise (the loaded module ID is used).
Make `Decodable` and `Decoder` infallible.
`Decoder` has two impls:
- opaque: this impl is already partly infallible, i.e. in some places it
currently panics on failure (e.g. if the input is too short, or on a
bad `Result` discriminant), and in some places it returns an error
(e.g. on a bad `Option` discriminant). The number of places where
either happens is surprisingly small, just because the binary
representation has very little redundancy and a lot of input reading
can occur even on malformed data.
- json: this impl is fully fallible, but it's only used (a) for the
`.rlink` file production, and there's a `FIXME` comment suggesting it
should change to a binary format, and (b) in a few tests in
non-fundamental ways. Indeed #85993 is open to remove it entirely.
And the top-level places in the compiler that call into decoding just
abort on error anyway. So the fallibility is providing little value, and
getting rid of it leads to some non-trivial performance improvements.
Much of this PR is pretty boring and mechanical. Some notes about
a few interesting parts:
- The commit removes `Decoder::{Error,error}`.
- `InternIteratorElement::intern_with`: the impl for `T` now has the same
optimization for small counts that the impl for `Result<T, E>` has,
because it's now much hotter.
- Decodable impls for SmallVec, LinkedList, VecDeque now all use
`collect`, which is nice; the one for `Vec` uses unsafe code, because
that gave better perf on some benchmarks.
r? `@bjorn3`
`Decoder` has two impls:
- opaque: this impl is already partly infallible, i.e. in some places it
currently panics on failure (e.g. if the input is too short, or on a
bad `Result` discriminant), and in some places it returns an error
(e.g. on a bad `Option` discriminant). The number of places where
either happens is surprisingly small, just because the binary
representation has very little redundancy and a lot of input reading
can occur even on malformed data.
- json: this impl is fully fallible, but it's only used (a) for the
`.rlink` file production, and there's a `FIXME` comment suggesting it
should change to a binary format, and (b) in a few tests in
non-fundamental ways. Indeed #85993 is open to remove it entirely.
And the top-level places in the compiler that call into decoding just
abort on error anyway. So the fallibility is providing little value, and
getting rid of it leads to some non-trivial performance improvements.
Much of this commit is pretty boring and mechanical. Some notes about
a few interesting parts:
- The commit removes `Decoder::{Error,error}`.
- `InternIteratorElement::intern_with`: the impl for `T` now has the same
optimization for small counts that the impl for `Result<T, E>` has,
because it's now much hotter.
- Decodable impls for SmallVec, LinkedList, VecDeque now all use
`collect`, which is nice; the one for `Vec` uses unsafe code, because
that gave better perf on some benchmarks.
I have found this code very confusing at times. This commit clarifies
things.
In particular, the commit explains the requirements that the `Borrow`
impls put on the `Eq` and `Hash` impls, which are non-obvious. And it
puts the `Borrow` impls first, since they force `Eq` and `Hash` to have
particular forms.
The commit also notes `TyS`'s uniqueness requirements.
Rollup of 17 pull requests
Successful merges:
- #91032 (Introduce drop range tracking to generator interior analysis)
- #92856 (Exclude "test" from doc_auto_cfg)
- #92860 (Fix errors on blanket impls by ignoring the children of generated impls)
- #93038 (Fix star handling in block doc comments)
- #93061 (Only suggest adding `!` to expressions that can be macro invocation)
- #93067 (rustdoc mobile: fix scroll offset when jumping to internal id)
- #93086 (Add tests to ensure that `let_chains` works with `if_let_guard`)
- #93087 (Fix src/test/run-make/raw-dylib-alt-calling-convention)
- #93091 (⬆ chalk to 0.76.0)
- #93094 (src/test/rustdoc-json: Check for `struct_field`s in `variant_tuple_struct.rs`)
- #93098 (Show a more informative panic message when `DefPathHash` does not exist)
- #93099 (rustdoc: auto create output directory when "--output-format json")
- #93102 (Pretty printer algorithm revamp step 3)
- #93104 (Support --bless for pp-exact pretty printer tests)
- #93114 (update comment for `ensure_monomorphic_enough`)
- #93128 (Add script to prevent point releases with same number as existing ones)
- #93136 (Backport the 1.58.1 release notes to master)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Show a more informative panic message when `DefPathHash` does not exist
This should hopefully make it easier to debug incremental compilation
bugs like #93096 without affecting performance.
Introduce drop range tracking to generator interior analysis
This PR addresses cases such as this one from #57478:
```rust
struct Foo;
impl !Send for Foo {}
let _: impl Send = || {
let guard = Foo;
drop(guard);
yield;
};
```
Previously, the `generator_interior` pass would unnecessarily include the type `Foo` in the generator because it was not aware of the behavior of `drop`. We fix this issue by introducing a drop range analysis that finds portions of the code where a value is guaranteed to be dropped. If a value is dropped at all suspend points, then it is no longer included in the generator type. Note that we are using "dropped" in a generic sense to include any case in which a value has been moved. That is, we do not only look at calls to the `drop` function.
There are several phases to the drop tracking algorithm, and we'll go into more detail below.
1. Use `ExprUseVisitor` to find values that are consumed and borrowed.
2. `DropRangeVisitor` uses consume and borrow information to gather drop and reinitialization events, as well as build a control flow graph.
3. We then propagate drop and reinitialization information through the CFG until we reach a fix point (see `DropRanges::propagate_to_fixpoint`).
4. When recording a type (see `InteriorVisitor::record`), we check the computed drop ranges to see if that value is definitely dropped at the suspend point. If so, we skip including it in the type.
## 1. Use `ExprUseVisitor` to find values that are consumed and borrowed.
We use `ExprUseVisitor` to identify the places where values are consumed. We track both the `hir_id` of the value, and the `hir_id` of the expression that consumes it. For example, in the expression `[Foo]`, the `Foo` is consumed by the array expression, so after the array expression we can consider the `Foo` temporary to be dropped.
In this process, we also collect values that are borrowed. The reason is that the MIR transform for generators conservatively assumes anything borrowed is live across a suspend point (see `rustc_mir_transform::generator::locals_live_across_suspend_points`). We match this behavior here as well.
## 2. Gather drop events, reinitialization events, and control flow graph
After finding the values of interest, we perform a post-order traversal over the HIR tree to find the points where these values are dropped or reinitialized. We use the post-order index of each event because this is how the existing generator interior analysis refers to the position of suspend points and the scopes of variables.
During this traversal, we also record branching and merging information to handle control flow constructs such as `if`, `match`, and `loop`. This is necessary because values may be dropped along some control flow paths but not others.
## 3. Iterate to fixed point
The previous pass found the interesting events and locations, but now we need to find the actual ranges where things are dropped. Upon entry, we have a list of nodes ordered by their position in the post-order traversal. Each node has a set of successors. For each node we additionally keep a bitfield with one bit per potentially consumed value. The bit is set if we the value is dropped along all paths entering this node.
To compute the drop information, we first reverse the successor edges to find each node's predecessors. Then we iterate through each node, and for each node we set its dropped value bitfield to the intersection of all incoming dropped value bitfields.
If any bitfield for any node changes, we re-run the propagation loop again.
## 4. Ignore dropped values across suspend points
At this point we have a data structure where we can ask whether a value is guaranteed to be dropped at any post order index for the HIR tree. We use this information in `InteriorVisitor` to check whether a value in question is dropped at a particular suspend point. If it is, we do not include that value's type in the generator type.
Note that we had to augment the region scope tree to include all yields in scope, rather than just the last one as we did before.
r? `@nikomatsakis`
improve `_` constants in item signature handling
removing the "type" from the error messages does slightly worsen the error messages for types, but figuring out whether the placeholder is for a type or a constant and correctly dealing with that seemed fairly difficult to me so I took the easy way out ✨ Imo the error message is still clear enough.
r? `@BoxyUwU` cc `@estebank`
- Also rename a trivial_const_drop to match style of other functions in
the util module.
- Also add a test for `const Drop` that doesn't depend on a `~const`
bound.
- Also comment a bit why we remove the const bound during dropck impl
check.
This is the same idea as #92533, but for `AssocItem` instead
of `VariantDef`/`FieldDef`.
With this change, we no longer have any uses of
`#[stable_hasher(project(...))]`
Remove some unused ordering derivations based on `DefId`
Like #93018, this removes some unused/unneeded ordering derivations as part of ongoing work on #90317. Here, these changes are aimed at making https://github.com/rust-lang/rust/pull/90749 easier to review, test, and merge.
r? `@cjgillot`
Formally implement let chains
## Let chains
My longest and hardest contribution since #64010.
Thanks to `@Centril` for creating the RFC and special thanks to `@matthewjasper` for helping me since the beginning of this journey. In fact, `@matthewjasper` did much of the complicated MIR stuff so it's true to say that this feature wouldn't be possible without him. Thanks again `@matthewjasper!`
With the changes proposed in this PR, it will be possible to chain let expressions along side local variable declarations or ordinary conditional expressions. In other words, do much of what the `if_chain` crate already does.
## Other considerations
* `if let guard` and `let ... else` features need special care and should be handled in a following PR.
* Irrefutable patterns are allowed within a let chain context
* ~~Three Clippy lints were already converted to start dogfooding and help detect possible corner cases~~
cc #53667
Directly use ConstValue for single literals in blocks
Addresses the minimal repro in https://github.com/rust-lang/rust/issues/92186, but doesn't fix the underlying problem (which would be solved by solving the anon subst problem afaict).
I do, however, think that it makes sense in general to treat single literals in anon blocks as const values directly, especially in light of the problem that the issue refers to (anon const evaluation being postponed until infer variables in substs can be resolved, which was introduced by https://github.com/rust-lang/rust/pull/90023), i.e. while we do get warnings for those unnecessary braces, we should try to avoid errors caused by those braces if possible.
Fix ICEs related to `Deref<Target=[T; N]>` on newtypes
1. Stash a const infer's type into the canonical var during canonicalization, so we can recreate the fresh const infer with that same type.
For example, given `[T; _]` we know `_` is a `usize`. If we go from infer => canonical => infer, we shouldn't forget that variable is a usize.
Fixes#92626Fixes#83704
2. Don't stash the autoderef'd slice type that we get from method lookup, but instead recreate it during method confirmation. We need to do this because the type we receive back after picking the method references a type variable that does not exist after probing is done.
Fixes#92637
... A better solution for the second issue would be to actually _properly_ implement `Deref` for `[T; N]` instead of fixing this autoderef hack to stop leaking inference variables. But I actually looked into this, and there are many complications with const impls.
