The old code was very hard to understand, involving an
`emit_without_consuming` call *and* a `delay_as_bug_without_consuming`
call.
With slight changes both calls can be avoided. Not creating the error
until later is crucial, as is the early return in the `if recovered`
block.
It took me some time to come up with this reworking -- it went through
intermediate states much further from the original code than this final
version -- and it's isn't obvious at a glance that it is equivalent. But
I think it is, and the unchanged test behaviour is good supporting
evidence.
The commit also changes `check_trailing_angle_brackets` to return
`Option<ErrorGuaranteed>`. This provides a stricter proof that it
emitted an error message than asserting `dcx.has_errors().is_some()`,
which would succeed if any error had previously been emitted anywhere.
It's not clear why this was here, because the created error is returned
as a normal error anyway.
Nor is it clear why removing the call works. The change doesn't affect
any tests; `tests/ui/parser/issues/issue-102182-impl-trait-recover.rs`
looks like the only test that could have been affected.
Instead of taking `seq` as a mutable reference,
`maybe_recover_struct_lit_bad_delims` now consumes `seq` on the recovery
path, and returns `seq` unchanged on the non-recovery path. The commit
also combines an `if` and a `match` to merge two identical paths.
Also change `recover_seq_parse_error` so it receives a `PErr` instead of
a `PResult`, because all the call sites now handle the `Ok`/`Err`
distinction themselves.
In this parsing recovery function, we only need to emit the previously
obtained error message and mark `expr` as erroneous in the case where we
actually recover.
This works for most of its call sites. This is nice, because `emit` very
much makes sense as a consuming operation -- indeed,
`DiagnosticBuilderState` exists to ensure no diagnostic is emitted
twice, but it uses runtime checks.
For the small number of call sites where a consuming emit doesn't work,
the commit adds `DiagnosticBuilder::emit_without_consuming`. (This will
be removed in subsequent commits.)
Likewise, `emit_unless` becomes consuming. And `delay_as_bug` becomes
consuming, while `delay_as_bug_without_consuming` is added (which will
also be removed in subsequent commits.)
All this requires significant changes to `DiagnosticBuilder`'s chaining
methods. Currently `DiagnosticBuilder` method chaining uses a
non-consuming `&mut self -> &mut Self` style, which allows chaining to
be used when the chain ends in `emit()`, like so:
```
struct_err(msg).span(span).emit();
```
But it doesn't work when producing a `DiagnosticBuilder` value,
requiring this:
```
let mut err = self.struct_err(msg);
err.span(span);
err
```
This style of chaining won't work with consuming `emit` though. For
that, we need to use to a `self -> Self` style. That also would allow
`DiagnosticBuilder` production to be chained, e.g.:
```
self.struct_err(msg).span(span)
```
However, removing the `&mut self -> &mut Self` style would require that
individual modifications of a `DiagnosticBuilder` go from this:
```
err.span(span);
```
to this:
```
err = err.span(span);
```
There are *many* such places. I have a high tolerance for tedious
refactorings, but even I gave up after a long time trying to convert
them all.
Instead, this commit has it both ways: the existing `&mut self -> Self`
chaining methods are kept, and new `self -> Self` chaining methods are
added, all of which have a `_mv` suffix (short for "move"). Changes to
the existing `forward!` macro lets this happen with very little
additional boilerplate code. I chose to add the suffix to the new
chaining methods rather than the existing ones, because the number of
changes required is much smaller that way.
This doubled chainging is a bit clumsy, but I think it is worthwhile
because it allows a *lot* of good things to subsequently happen. In this
commit, there are many `mut` qualifiers removed in places where
diagnostics are emitted without being modified. In subsequent commits:
- chaining can be used more, making the code more concise;
- more use of chaining also permits the removal of redundant diagnostic
APIs like `struct_err_with_code`, which can be replaced easily with
`struct_err` + `code_mv`;
- `emit_without_diagnostic` can be removed, which simplifies a lot of
machinery, removing the need for `DiagnosticBuilderState`.
Exhaustiveness: remove `Matrix.wildcard_row`
To compute exhaustiveness, we check whether an extra row with a wildcard added at the end of the match expression would be reachable. We used to store an actual such row of patterns in the `Matrix`, but it's a bit redundant since we know it only contains wildcards. It was kept because we used it to get the type of each column (and relevancy). With this PR, we keep track of the types (and relevancy) directly.
This is part of me splitting up https://github.com/rust-lang/rust/pull/119581 for ease of review.
r? `@compiler-errors`
in particular, this makes the `c` feature for compiler-builtins an explicit opt-in, rather than silently detected by whether `llvm-project` is checked out on disk.
exposing this is necessary because the `cc` crate doesn't support cross-compiling to MSVC, and we want people to be able to run `x check --target foo` regardless of whether they have a c toolchain available.
this also uses the new option in CI, where we *do* want to optimize compiler_builtins.
the new option is off by default for the `dev` channel and on otherwise.
mark vec::IntoIter pointers as `!nonnull`
This applies the same NonNull optimizations to `vec::IntoIter` as #113344 did for `slice::Iter`
[Godbolt](https://rust.godbolt.org/z/n1cTea718) showing the test IR on current nightly, note the absence of `!nonnull` on the loads.
r? `@scottmcm`
Rollup of 6 pull requests
Successful merges:
- #119252 (rustc_mir_transform: Enforce `rustc::potential_query_instability` lint)
- #119548 (Use the current target instead of iterating over all targets)
- #119656 (document rounding behavior of rint/nearbyint for ties)
- #119657 (Fix typo in docs for slice::split_once, slice::rsplit_once)
- #119666 (Populate `yield` and `resume` types in MIR body while body is being initialized)
- #119679 (Ask for rustc version in diagnostic reports, remind users to update their toolchain)
r? `@ghost`
`@rustbot` modify labels: rollup
Ask for rustc version in diagnostic reports, remind users to update their toolchain
IDK why we don't ask for rustc toolchain when filing diagnostic issues. Diagnostics are sometimes very dramatically affected by compiler version, and users may report old diagnostic issues that were fixed by subsequent rustc versions that they have yet to update to.
For example, #119678 was made a bit more difficult to triage due to the template not asking the issuer to report their rustc version.
Populate `yield` and `resume` types in MIR body while body is being initialized
I found it weird that we went back and populated these types *after* the body was constructed. Let's just do it all at once.
Fix typo in docs for slice::split_once, slice::rsplit_once
This fixes a typo in the doc comments for these methods, which I tripped over while reading the docs: "If any matching elements are **resent** in the slice [...]", which is presumably meant to read **present**.
I mentioned this in #112811, the tracking issue for `slice_split_once`, and was encouraged to open a PR.
document rounding behavior of rint/nearbyint for ties
It's not possible to change the rounding mode in Rust, so these intrinsics will always behave like `roundeven`.
Use the current target instead of iterating over all targets
Since we already iterate through targets in StepDescription::maybe_run, there is no need to iterate targets again in the install step for std.
Compared the results before and after applying the changes to install step of std, and there were no differences.
```sh
~/devspace/.other/rustc-builds $ sha256sum ./old/usr/local/lib/rustlib/manifest-rust-std-x86_64-*
c2ea86fc25ffac87b0b135f31ba9644ad97549da4c050c3921b437d1e18285fd ./old/usr/local/lib/rustlib/manifest-rust-std-x86_64-pc-windows-gnu
d2f1081a779962e2cbc27f53191783d13428abd0964465547af78ce34c7251dd ./old/usr/local/lib/rustlib/manifest-rust-std-x86_64-unknown-linux-gnu
~/devspace/.other/rustc-builds $ sha256sum ./new/usr/local/lib/rustlib/manifest-rust-std-x86_64-*
c2ea86fc25ffac87b0b135f31ba9644ad97549da4c050c3921b437d1e18285fd ./new/usr/local/lib/rustlib/manifest-rust-std-x86_64-pc-windows-gnu
d2f1081a779962e2cbc27f53191783d13428abd0964465547af78ce34c7251dd ./new/usr/local/lib/rustlib/manifest-rust-std-x86_64-unknown-linux-gnu
```
Fixes#119533
rustc_mir_transform: Enforce `rustc::potential_query_instability` lint
Stop allowing `rustc::potential_query_instability` on all of rustc_mir_transform and instead allow it on a case-by-case basis if it is safe to do so. In this particular crate, all instances were safe to allow.
Part of https://github.com/rust-lang/rust/issues/84447 which is E-help-wanted.
Run Miri and mir-opt tests without a target linker
Normally, we need a linker for the target to build the standard library. That's only because `std` declares crate-type lib and dylib; building the dylib is what creates a need for the linker.
But for mir-opt tests (and for Miri) we do not need to build a `libstd.so`. So with this PR, when we build the standard library for mir-opt tests, instead of `cargo build` we run `cargo rustc --crate-type=lib` which overrides the configured crate types in `std`'s manifest.
I've also swapped in what seems to me a better hack than `BOOTSTRAP_SKIP_TARGET_SANITY` to prevent cross-interpreting with Miri from checking for a target linker and expanded it to mir-opt tests too. Whether it's actually better is up to a reviewer.
Rewrite Iterator::position default impl
Storing the accumulating value outside the fold in an attempt to improve code generation has shown speedups on various handwritten benchmarks, see discussion at #119551.
Stop allowing `rustc::potential_query_instability` on all of
rustc_mir_transform and instead allow it on a case-by-case basis if it
is safe to do so. In this particular crate, all instances were safe to
allow.
Strip lld-wrapper binaries
This cuts down on the amount of data we need to ship and users need to keep on disk for each Rust toolchain. As noted in the added comment, there's not much going on in these executables, so the added benefit of symbols and debuginfo isn't large, while the cost is not insignificant.
This takes each of the binaries (we store 4 identical copies under different names) from 3.7MB to 384KB.
Remove ignore-stage1 that was added when changing error count msg
The bootstrap bump has happened, so the bootstrap compiler now contains the new diagnostic.
this was added in #118138
rustc_span: More consistent span combination operations
Also add more tests for using `tt` in addition to `ident`, and some other minor tweaks, see individual commits.
This is a part of https://github.com/rust-lang/rust/pull/119412 that doesn't yet add side tables for metavariable spans.
rustc_mir_transform: Make DestinationPropagation stable for queries
By using `FxIndexMap` instead of `FxHashMap`, so that the order of visiting of locals is deterministic.
We also need to bless
`copy_propagation_arg.foo.DestinationPropagation.panic*.diff`. Do not review the diff of the diff. Instead look at the diff files before and after this commit. Both before and after this commit, 3 statements are replaced with nop. It's just that due to change in ordering, different statements are replaced. But the net result is the same. In other words, compare this diff (before fix):
* 090d5eac72/tests/mir-opt/dest-prop/copy_propagation_arg.foo.DestinationPropagation.panic-unwind.diff
With this diff (after fix):
* f603babd63/tests/mir-opt/dest-prop/copy_propagation_arg.foo.DestinationPropagation.panic-unwind.diff
and you can see that both before and after the fix, we replace 3 statements with `nop`s.
I find it _slightly_ surprising that the test this PR affects did not previously fail spuriously due to the indeterminism of `FxHashMap`, but I guess in can be explained with the predictability of small `FxHashMap`s with `usize` (`Local`) keys, or something along those lines.
This should fix [this](https://github.com/rust-lang/rust/pull/119252#discussion_r1436101791) comment, but I wanted to make a separate PR for this fix for a simpler development and review process.
Part of https://github.com/rust-lang/rust/issues/84447 which is E-help-wanted.
r? `@cjgillot` who is reviewer for the highly related PR https://github.com/rust-lang/rust/pull/119252.
merge core_panic feature into panic_internals
I don't know why those are two separate features, but it does not seem intentional. This merge is useful because with https://github.com/rust-lang/rust/pull/118123, panic_internals is recognized as an internal feature, but core_panic is not -- but core_panic definitely should be internal.
rustdoc: search for tuples and unit by type with `()`
This feature extends rustdoc to support the syntax that most users will naturally attempt to use to search for tuples. Part of https://github.com/rust-lang/rust/issues/60485
Function signature searches already support tuples and unit. The explicit name `primitive:tuple` and `primitive:unit` can be used to match a tuple or unit, while `()` will match either one. It also follows the direction set by the actual language for parens as a group, so `(u8,)` will only match a tuple, while `(u8)` will match a plain, unwrapped byte—thanks to loose search semantics, it will also match the tuple.
## Preview
* [`option<t>, option<u> -> (t, u)`](<https://notriddle.com/rustdoc-html-demo-5/tuple-unit/std/index.html?search=option%3Ct%3E%2C option%3Cu%3E -%3E (t%2C u)>)
* [`[t] -> (t,)`](<https://notriddle.com/rustdoc-html-demo-5/tuple-unit/std/index.html?search=[t] -%3E (t%2C)>)
* [`(ipaddr,) -> socketaddr`](<https://notriddle.com/rustdoc-html-demo-5/tuple-unit/std/index.html?search=(ipaddr%2C) -%3E socketaddr>)
## Motivation
When type-based search was first landed, it was directly [described as incomplete][a comment].
[a comment]: https://github.com/rust-lang/rust/pull/23289#issuecomment-79437386
Filling out the missing functionality is going to mean adding support for more of Rust's [type expression] syntax, such as tuples (in this PR), references, raw pointers, function pointers, and closures.
[type expression]: https://doc.rust-lang.org/reference/types.html#type-expressions
There does seem to be demand for this sort of thing, such as [this Discord message](https://discord.com/channels/442252698964721669/443150878111694848/1042145740065099796) expressing regret at rustdoc not supporting tuples in search queries.
## Reference description (from the Rustdoc book)
<table>
<thead>
<tr>
<th>Shorthand</th>
<th>Explicit names</th>
</tr>
</thead>
<tbody>
<tr><td colspan="2">Before this PR</td></tr>
<tr>
<td><code>[]</code></td>
<td><code>primitive:slice</code> and/or <code>primitive:array</code></td>
</tr>
<tr>
<td><code>[T]</code></td>
<td><code>primitive:slice<T></code> and/or <code>primitive:array<T></code></td>
</tr>
<tr>
<td><code>!</code></td>
<td><code>primitive:never</code></td>
</tr>
<tr><td colspan="2">After this PR</td></tr>
<tr>
<td><code>()</code></td>
<td><code>primitive:unit</code> and/or <code>primitive:tuple</code></td>
</tr>
<tr>
<td><code>(T)</code></td>
<td><code>T</code></td>
</tr>
<tr>
<td><code>(T,)</code></td>
<td><code>primitive:tuple<T></code></td>
</tr>
</tbody>
</table>
A single type expression wrapped in parens is the same as that type expression, since parens act as the grouping operator. If they're empty, though, they will match both `unit` and `tuple`, and if there's more than one type (or a trailing or leading comma) it is the same as `primitive:tuple<...>`.
However, since items can be left out of the query, `(T)` will still return results for types that match tuples, even though it also matches the type on its own. That is, `(u32)` matches `(u32,)` for the exact same reason that it also matches `Result<u32, Error>`.
## Future direction
The [type expression grammar](https://doc.rust-lang.org/reference/types.html#type-expressions) from the Reference is given below:
<pre><code>Syntax
Type :
TypeNoBounds
| <a href="https://doc.rust-lang.org/reference/types/impl-trait.html">ImplTraitType</a>
| <a href="https://doc.rust-lang.org/reference/types/trait-object.html">TraitObjectType</a>
<br>
TypeNoBounds :
<a href="https://doc.rust-lang.org/reference/types.html#parenthesized-types">ParenthesizedType</a>
| <a href="https://doc.rust-lang.org/reference/types/impl-trait.html">ImplTraitTypeOneBound</a>
| <a href="https://doc.rust-lang.org/reference/types/trait-object.html">TraitObjectTypeOneBound</a>
| <a href="https://doc.rust-lang.org/reference/paths.html#paths-in-types">TypePath</a>
| <a href="https://doc.rust-lang.org/reference/types/tuple.html#tuple-types">TupleType</a>
| <a href="https://doc.rust-lang.org/reference/types/never.html">NeverType</a>
| <a href="https://doc.rust-lang.org/reference/types/pointer.html#raw-pointers-const-and-mut">RawPointerType</a>
| <a href="https://doc.rust-lang.org/reference/types/pointer.html#shared-references-">ReferenceType</a>
| <a href="https://doc.rust-lang.org/reference/types/array.html">ArrayType</a>
| <a href="https://doc.rust-lang.org/reference/types/slice.html">SliceType</a>
| <a href="https://doc.rust-lang.org/reference/types/inferred.html">InferredType</a>
| <a href="https://doc.rust-lang.org/reference/paths.html#qualified-paths">QualifiedPathInType</a>
| <a href="https://doc.rust-lang.org/reference/types/function-pointer.html">BareFunctionType</a>
| <a href="https://doc.rust-lang.org/reference/macros.html#macro-invocation">MacroInvocation</a>
</code></pre>
ImplTraitType and TraitObjectType (and ImplTraitTypeOneBound and TraitObjectTypeOneBound) are not yet implemented. They would mostly desugar to `trait:`, similarly to how `!` desugars to `primitive:never`.
ParenthesizedType and TuplePath are added in this PR.
TypePath is already implemented (except const generics, which is not planned, and function-like trait syntax, which is planned as part of closure support).
NeverType is already implemented.
RawPointerType and ReferenceType require parsing and fixes to the search index to store this information, but otherwise their behavior seems simple enough. Just like tuples and slices, `&T` would be equivalent to `primitive:reference<T>`, `&mut T` would be equivalent to `primitive:reference<keyword:mut, T>`, `*T` would be equivalent to `primitive:pointer<T>`, `*mut T` would be equivalent to `primitive:pointer<keyword:mut, T>`, and `*const T` would be equivalent to `primitive:pointer<keyword:const, T>`. Lifetime generics support is not planned, because lifetime subtyping seems too complicated.
ArrayType is subsumed by SliceType right now. Implementing const generics is not planned, because it seems like it would require a lot of implementation complexity for not much gain.
InferredType isn't really covered right now. Its semantics in a search context are not obvious.
QualifiedPathInType is not implemented, and it is not planned. I would need a use case to justify it, and act as a guide for what the exact semantics should be.
BareFunctionType is not implemented. Along with function-like trait syntax, which is formally considered a TypePath, it's the biggest missing feature to be able to do structured searches over generic APIs like `Option`.
MacroInvocation is not parsed (macro names are, but they don't mean the same thing here at all). Those are gone by the time Rustdoc sees the source code.
This cuts down on the amount of data we need to ship and users need to
keep on disk for each Rust toolchain. As noted in the added comment,
there's not much going on in these executables, so the added benefit of
symbols and debuginfo isn't large, while the cost is not insignificant.
This takes each of the binaries (we store 4 identical copies under
different names) from 3.7MB to 384KB.
rustc_span: Optimize syntax context comparisons
Including comparisons with root context.
- `eq_ctxt` doesn't require retrieving full `SpanData`, or taking the span interner lock twice.
- Checking `SyntaxContext` for "rootness" is cheaper than extracting a full outer `ExpnData` for it and checking *it* for rootness.
The internal lint for `eq_ctxt` is also tweaked to detect `a.ctxt() != b.ctxt()` in addition to `a.ctxt() == b.ctxt()`.
