Add -Zuse-sync-unwind
Currently Rust uses async unwind by default, but async unwind will bring non-negligible size overhead. it would be nice to allow users to choose this.
In addition, async unwind currently prevents LLVM from generate compact unwind for MachO, if one wishes to generate compact unwind for MachO, then also needs this flag.
Separate immediate and in-memory ScalarPair representation
Currently, we assume that ScalarPair is always represented using a two-element struct, both as an immediate value and when stored in memory.
This currently works fairly well, but runs into problems with https://github.com/rust-lang/rust/pull/116672, where a ScalarPair involving an i128 type can no longer be represented as a two-element struct in memory. For example, the tuple `(i32, i128)` needs to be represented in-memory as `{ i32, [3 x i32], i128 }` to satisfy alignment requirements. Using `{ i32, i128 }` instead will result in the second element being stored at the wrong offset (prior to LLVM 18).
Resolve this issue by no longer requiring that the immediate and in-memory type for ScalarPair are the same. The in-memory type will now look the same as for normal struct types (and will include padding filler and similar), while the immediate type stays a simple two-element struct type. This also means that booleans in immediate ScalarPair are now represented as i1 rather than i8, just like we do everywhere else.
The core change here is to llvm_type (which now treats ScalarPair as a normal struct) and immediate_llvm_type (which returns the two-element struct that llvm_type used to produce). The rest is fixing things up to no longer assume these are the same. In particular, this switches places that try to get pointers to the ScalarPair elements to use byte-geps instead of struct-geps.
Support reg_addr register class in s390x inline assembly
In s390x, `r0` cannot be used as an address register (it is evaluated as zero in an address context).
Therefore, currently, in assemblies involving memory accesses, `r0` must be [marked as clobbered](1a1155653a/src/arch/s390x.rs (L58)) or [explicitly used to a non-address](1a1155653a/src/arch/s390x.rs (L135)) or explicitly use an address register to prevent `r0` from being allocated to a register for the address.
This patch adds a register class for allocating general-purpose registers, except `r0`, to make it easier to use address registers. (powerpc already has a register class (reg_nonzero) for a similar purpose.)
This is identical to the `a` constraint in LLVM and GCC:
https://llvm.org/docs/LangRef.html#supported-constraint-code-list
> a: A 32, 64, or 128-bit integer address register (excludes R0, which in an address context evaluates as zero).
https://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html
> a
> Address register (general purpose register except r0)
cc ``@uweigand``
r? ``@Amanieu``
Because it's redundant w.r.t. `Diagnostic::is_lint`, which is present
for every diagnostic level.
`struct_lint_level_impl` was the only place that set the `Error` field
to `true`, and it's also the only place that calls
`Diagnostic::is_lint()` to set the `is_lint` field.
coverage: Avoid a query stability hazard in `function_coverage_map`
When #118865 started enforcing the `rustc::potential_query_instability` lint in `rustc_codegen_llvm`, it added an exemption for this site, arguing that the entries are only used to create a list of filenames that is later sorted.
However, the list of entries also gets traversed when creating the function coverage records in LLVM IR, which may be sensitive to hash-based ordering.
This patch therefore changes `function_coverage_map` to use `FxIndexMap`, which should avoid hash-based instability by iterating in insertion order.
cc ``@Enselic``
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
When #118865 started enforcing the `rustc::potential_query_instability` lint in
`rustc_codegen_llvm`, it added an exemption for this site, arguing that the
entries are only used to create a list of filenames that is later sorted.
However, the list of entries also gets traversed when creating the function
coverage records in LLVM IR, which may be sensitive to hash-based ordering.
This patch therefore changes `function_coverage_map` to use `FxIndexMap`, which
should avoid hash-based instability by iterating in insertion order.
This involves lots of breaking changes. There are two big changes that
force changes. The first is that the bitflag types now don't
automatically implement normal derive traits, so we need to derive them
manually.
Additionally, bitflags now have a hidden inner type by default, which
breaks our custom derives. The bitflags docs recommend using the impl
form in these cases, which I did.
Remove `DiagCtxt` API duplication
`DiagCtxt` defines the internal API for creating and emitting diagnostics: methods like `struct_err`, `struct_span_warn`, `note`, `create_fatal`, `emit_bug`. There are over 50 methods.
Some of these methods are then duplicated across several other types: `Session`, `ParseSess`, `Parser`, `ExtCtxt`, and `MirBorrowckCtxt`. `Session` duplicates the most, though half the ones it does are unused. Each duplicated method just calls forward to the corresponding method in `DiagCtxt`. So this duplication exists to (in the best case) shorten chains like `ecx.tcx.sess.parse_sess.dcx.emit_err()` to `ecx.emit_err()`.
This API duplication is ugly and has been bugging me for a while. And it's inconsistent: there's no real logic about which methods are duplicated, and the use of `#[rustc_lint_diagnostic]` and `#[track_caller]` attributes vary across the duplicates.
This PR removes the duplicated API methods and makes all diagnostic creation and emission go through `DiagCtxt`. It also adds `dcx` getter methods to several types to shorten chains. This approach scales *much* better than API duplication; indeed, the PR adds `dcx()` to numerous types that didn't have API duplication: `TyCtxt`, `LoweringCtxt`, `ConstCx`, `FnCtxt`, `TypeErrCtxt`, `InferCtxt`, `CrateLoader`, `CheckAttrVisitor`, and `Resolver`. These result in a lot of changes from `foo.tcx.sess.emit_err()` to `foo.dcx().emit_err()`. (You could do this with more types, but it gets into diminishing returns territory for types that don't emit many diagnostics.)
After all these changes, some call sites are more verbose, some are less verbose, and many are the same. The total number of lines is reduced, mostly because of the removed API duplication. And consistency is increased, because calls to `emit_err` and friends are always preceded with `.dcx()` or `.dcx`.
r? `@compiler-errors`
Unify SourceFile::name_hash and StableSourceFileId
This PR adapts the existing `StableSourceFileId` type so that it can be used instead of the `name_hash` field of `SourceFile`. This simplifies a few things that were kind of duplicated before.
The PR should also fix issues https://github.com/rust-lang/rust/issues/112700 and https://github.com/rust-lang/rust/issues/115835, but I was not able to reproduce these issues in a regression test. As far as I can tell, the root cause of these issues is that the id of the originating crate is not hashed in the `HashStable` impl of `Span` and thus cache entries that should have been considered invalidated were loaded. After this PR, the `stable_id` field of `SourceFile` includes information about the originating crate, so that ICE should not occur anymore.
Lots of vectors of messages called `message` or `msg`. This commit
pluralizes them.
Note that `emit_message_default` and `emit_messages_default` both
already existed, and both process a vector, so I renamed the former
`emit_messages_default_inner` because it's called by the latter.
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
coverage: Skip instrumenting a function if no spans were extracted from MIR
The immediate symptoms of #118643 were fixed by #118666, but some users reported that their builds now encounter another coverage-related ICE:
```
error: internal compiler error: compiler/rustc_codegen_llvm/src/coverageinfo/mapgen.rs:98:17: A used function should have had coverage mapping data but did not: (...)
```
I was able to reproduce at least one cause of this error: if no relevant spans could be extracted from a function, but the function contains `CoverageKind::SpanMarker` statements, then codegen still thinks the function is instrumented and complains about the fact that it has no coverage spans.
This PR prevents that from happening in two ways:
- If we didn't extract any relevant spans from MIR, skip instrumenting the entire function and don't create a `FunctionCoverateInfo` for it.
- If coverage codegen sees a `CoverageKind::SpanMarker` statement, skip it early and avoid creating `func_coverage`.
---
Fixes#118850.
Coverage marker statements should have no effect on codegen, but in some cases
they could have the side-effect of creating a `func_coverage` entry for their
enclosing function. That can lead to an ICE for functions that don't actually
have any coverage spans.
Currently, we assume that ScalarPair is always represented using
a two-element struct, both as an immediate value and when stored
in memory.
This currently works fairly well, but runs into problems with
https://github.com/rust-lang/rust/pull/116672, where a ScalarPair
involving an i128 type can no longer be represented as a two-element
struct in memory. For example, the tuple `(i32, i128)` needs to be
represented in-memory as `{ i32, [3 x i32], i128 }` to satisfy
alignment requirement. Using `{ i32, i128 }` instead will result in
the second element being stored at the wrong offset (prior to
LLVM 18).
Resolve this issue by no longer requiring that the immediate and
in-memory type for ScalarPair are the same. The in-memory type
will now look the same as for normal struct types (and will include
padding filler and similar), while the immediate type stays a
simple two-element struct type. This also means that booleans in
immediate ScalarPair are now represented as i1 rather than i8,
just like we do everywhere else.
The core change here is to llvm_type (which now treats ScalarPair
as a normal struct) and immediate_llvm_type (which returns the
two-element struct that llvm_type used to produce). The rest is
fixing things up to no longer assume these are the same. In
particular, this switches places that try to get pointers to the
ScalarPair elements to use byte-geps instead of struct-geps.
Sets the accessibility of types and fields in DWARF using
`DW_AT_accessibility` attribute.
`DW_AT_accessibility` (public/protected/private) isn't exactly right for
Rust, but neither is `DW_AT_visibility` (local/exported/qualified), and
there's no way to set `DW_AT_visbility` in LLVM's API.
Signed-off-by: David Wood <david@davidtw.co>
It's necessary for `derive(Diagnostic)`, but is best avoided elsewhere
because there are clearer alternatives.
This required adding `Handler::struct_almost_fatal`.
Fix alignment passed down to LLVM for simd_masked_load
Follow up to #117953
The alignment for a masked load operation should be that of the element/lane, not the vector as a whole
It can produce miscompilations after the LLVM optimizer notices the higher alignment and promotes this to an unmasked, aligned load followed up by blend/select - https://rust.godbolt.org/z/KEeGbevbb
Stop allowing `rustc::potential_query_instability` on all of
`rustc_codegen_llvm` and instead allow it on a case-by-case basis. In
this case, both instances are safe to allow.
