Like for rlibs, the paths on the linker command line need to be relative
paths if the sysroot was specified by the user to be a relative path.
Dylibs put the path in /LIBPATH instead of into the file path of the
library itself, so we rehome the libpath and adjust the rehoming function
to be able to support both use cases, rlibs and dylibs.
When the `--sysroot` is specified as relative to the current working
directory, the sysroot's rlibs should also be specified as relative
paths. Otherwise, the current working directory ends up in the
absolute paths, and in the linker command line. And the entire linker
command line appears in the PDB file generated by the MSVC linker.
When adding an rlib to the linker command line, if the rlib's canonical
path is in the sysroot's canonical path, then use the current sysroot
path + filename instead of the full absolute path to the rlib. This
means that when `--sysroot=foo` is specified, the linker command line
will contain `foo/rustlib/target/lib/lib*.rlib` instead of the full
absolute path to the same.
This addresses https://github.com/rust-lang/rust/issues/112586
Because tiny CGUs make compilation less efficient *and* result in worse
generated code.
We don't do this when the number of CGUs is explicitly given, because
there are times when the requested number is very important, as
described in some comments within the commit. So the commit also
introduces a `CodegenUnits` type that distinguishes between default
values and user-specified values.
This change has a roughly neutral effect on walltimes across the
rustc-perf benchmarks; there are some speedups and some slowdowns. But
it has significant wins for most other metrics on numerous benchmarks,
including instruction counts, cycles, binary size, and max-rss. It also
reduces parallelism, which is good for reducing jobserver competition
when multiple rustc processes are running at the same time. It's smaller
benchmarks that benefit the most; larger benchmarks already have CGUs
that are all larger than the minimum size.
Here are some example before/after CGU sizes for opt builds.
- html5ever
- CGUs: 16, mean size: 1196.1, sizes: [3908, 2992, 1706, 1652, 1572,
1136, 1045, 948, 946, 938, 579, 471, 443, 327, 286, 189]
- CGUs: 4, mean size: 4396.0, sizes: [6706, 3908, 3490, 3480]
- libc
- CGUs: 12, mean size: 35.3, sizes: [163, 93, 58, 53, 37, 8, 2 (x6)]
- CGUs: 1, mean size: 424.0, sizes: [424]
- tt-muncher
- CGUs: 5, mean size: 1819.4, sizes: [8508, 350, 198, 34, 7]
- CGUs: 1, mean size: 9075.0, sizes: [9075]
Note that CGUs of size 100,000+ aren't unusual in larger programs.
Write to stdout if `-` is given as output file
With this PR, if `-o -` or `--emit KIND=-` is provided, output will be written to stdout instead. Binary output (those of type `obj`, `llvm-bc`, `link` and `metadata`) being written this way will result in an error unless stdout is not a tty. Multiple output types going to stdout will trigger an error too, as they will all be mixded together.
This implements https://github.com/rust-lang/compiler-team/issues/431
The idea behind the changes is to introduce an `OutFileName` enum that represents the output - be it a real path or stdout - and to use this enum along the code paths that handle different output types.
Rollup of 9 pull requests
Successful merges:
- #112034 (Migrate `item_opaque_ty` to Askama)
- #112179 (Avoid passing --cpu-features when empty)
- #112309 (bootstrap: remove dependency `is-terminal`)
- #112388 (Migrate GUI colors test to original CSS color format)
- #112389 (Add a test for #105709)
- #112392 (Fix ICE for while loop with assignment condition with LHS place expr)
- #112394 (Remove accidental comment)
- #112396 (Track more diagnostics in `rustc_expand`)
- #112401 (Don't `use compile_error as print`)
r? `@ghost`
`@rustbot` modify labels: rollup
Removed use of iteration through a HashMap/HashSet in rustc_incremental and replaced with IndexMap/IndexSet
This allows for the `#[allow(rustc::potential_query_instability)]` in rustc_incremental to be removed, moving towards fixing #84447 (although a LOT more modules have to be changed to fully resolve it). Only HashMaps/HashSets that are being iterated through have been modified (although many structs and traits outside of rustc_incremental had to be modified as well, as they had fields/methods that involved a HashMap/HashSet that would be iterated through)
I'm making a PR for just 1 module changed to test for performance regressions and such, for future changes I'll either edit this PR to reflect additional modules being converted, or batch multiple modules of changes together and make a PR for each group of modules.
Force all native libraries to be statically linked when linking a static binary
Previously, `#[link]` without an explicit `kind = "static"` would confuse the linker and end up producing a dynamically linked library because of the `-Bdynamic` flag. However this binary would not work correctly anyways since it was linked with startup code for a static binary.
This PR solves this by forcing all native libraries to be statically linked when the output is a static binary that cannot link to dynamic libraries anyways.
Fixes#108878Fixes#102993
If `-o -` or `--emit KIND=-` is provided, output will be written
to stdout instead. Binary output (`obj`, `llvm-bc`, `link` and
`metadata`) being written this way will result in an error unless
stdout is not a tty. Multiple output types going to stdout will
trigger an error too, as they will all be mixded together.
Use `load`+`store` instead of `memcpy` for small integer arrays
I was inspired by #98892 to see whether, rather than making `mem::swap` do something smart in the library, we could update MIR assignments like `*_1 = *_2` to do something smarter than `memcpy` for sufficiently-small types that doing it inline is going to be better than a `memcpy` call in assembly anyway. After all, special code may help `mem::swap`, but if the "obvious" MIR can just result in the correct thing that helps everything -- other code like `mem::replace`, people doing it manually, and just passing around by value in general -- as well as makes MIR inlining happier since it doesn't need to deal with all the complicated library code if it just sees a couple assignments.
LLVM will turn the short, known-length `memcpy`s into direct instructions in the backend, but that's too late for it to be able to remove `alloca`s. In general, replacing `memcpy`s with typed instructions is hard in the middle-end -- even for `memcpy.inline` where it knows it won't be a function call -- is hard [due to poison propagation issues](https://rust-lang.zulipchat.com/#narrow/stream/187780-t-compiler.2Fwg-llvm/topic/memcpy.20vs.20load-store.20for.20MIR.20assignments/near/360376712). So because we know more about the type invariants -- these are typed copies -- rustc can emit something more specific, allowing LLVM to `mem2reg` away the `alloca`s in some situations.
#52051 previously did something like this in the library for `mem::swap`, but it ended up regressing during enabling mir inlining (cbbf06b0cd), so this has been suboptimal on stable for ≈5 releases now.
The code in this PR is narrowly targeted at just integer arrays in LLVM, but works via a new method on the [`LayoutTypeMethods`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_codegen_ssa/traits/trait.LayoutTypeMethods.html) trait, so specific backends based on cg_ssa can enable this for more situations over time, as we find them. I don't want to try to bite off too much in this PR, though. (Transparent newtypes and simple things like the 3×usize `String` would be obvious candidates for a follow-up.)
Codegen demonstrations: <https://llvm.godbolt.org/z/fK8hT9aqv>
Before:
```llvm
define void `@swap_rgb48_old(ptr` noalias nocapture noundef align 2 dereferenceable(6) %x, ptr noalias nocapture noundef align 2 dereferenceable(6) %y) unnamed_addr #1 {
%a.i = alloca [3 x i16], align 2
call void `@llvm.lifetime.start.p0(i64` 6, ptr nonnull %a.i)
call void `@llvm.memcpy.p0.p0.i64(ptr` noundef nonnull align 2 dereferenceable(6) %a.i, ptr noundef nonnull align 2 dereferenceable(6) %x, i64 6, i1 false)
tail call void `@llvm.memcpy.p0.p0.i64(ptr` noundef nonnull align 2 dereferenceable(6) %x, ptr noundef nonnull align 2 dereferenceable(6) %y, i64 6, i1 false)
call void `@llvm.memcpy.p0.p0.i64(ptr` noundef nonnull align 2 dereferenceable(6) %y, ptr noundef nonnull align 2 dereferenceable(6) %a.i, i64 6, i1 false)
call void `@llvm.lifetime.end.p0(i64` 6, ptr nonnull %a.i)
ret void
}
```
Note it going to stack:
```nasm
swap_rgb48_old: # `@swap_rgb48_old`
movzx eax, word ptr [rdi + 4]
mov word ptr [rsp - 4], ax
mov eax, dword ptr [rdi]
mov dword ptr [rsp - 8], eax
movzx eax, word ptr [rsi + 4]
mov word ptr [rdi + 4], ax
mov eax, dword ptr [rsi]
mov dword ptr [rdi], eax
movzx eax, word ptr [rsp - 4]
mov word ptr [rsi + 4], ax
mov eax, dword ptr [rsp - 8]
mov dword ptr [rsi], eax
ret
```
Now:
```llvm
define void `@swap_rgb48(ptr` noalias nocapture noundef align 2 dereferenceable(6) %x, ptr noalias nocapture noundef align 2 dereferenceable(6) %y) unnamed_addr #0 {
start:
%0 = load <3 x i16>, ptr %x, align 2
%1 = load <3 x i16>, ptr %y, align 2
store <3 x i16> %1, ptr %x, align 2
store <3 x i16> %0, ptr %y, align 2
ret void
}
```
still lowers to `dword`+`word` operations, but has no stack traffic:
```nasm
swap_rgb48: # `@swap_rgb48`
mov eax, dword ptr [rdi]
movzx ecx, word ptr [rdi + 4]
movzx edx, word ptr [rsi + 4]
mov r8d, dword ptr [rsi]
mov dword ptr [rdi], r8d
mov word ptr [rdi + 4], dx
mov word ptr [rsi + 4], cx
mov dword ptr [rsi], eax
ret
```
And as a demonstration that this isn't just `mem::swap`, a `mem::replace` on a small array (since replace doesn't use swap since #83022), which used to be `memcpy`s in LLVM changes in IR
```llvm
define void `@replace_short_array(ptr` noalias nocapture noundef sret([3 x i32]) dereferenceable(12) %0, ptr noalias noundef align 4 dereferenceable(12) %r, ptr noalias nocapture noundef readonly dereferenceable(12) %v) unnamed_addr #0 {
start:
%1 = load <3 x i32>, ptr %r, align 4
store <3 x i32> %1, ptr %0, align 4
%2 = load <3 x i32>, ptr %v, align 4
store <3 x i32> %2, ptr %r, align 4
ret void
}
```
but that lowers to reasonable `dword`+`qword` instructions still
```nasm
replace_short_array: # `@replace_short_array`
mov rax, rdi
mov rcx, qword ptr [rsi]
mov edi, dword ptr [rsi + 8]
mov dword ptr [rax + 8], edi
mov qword ptr [rax], rcx
mov rcx, qword ptr [rdx]
mov edx, dword ptr [rdx + 8]
mov dword ptr [rsi + 8], edx
mov qword ptr [rsi], rcx
ret
```
These tend to have special handling in a bunch of places anyway, so the variant helps remember that. And I think it's easier to grok than non-Scalar Aggregates sometimes being `Immediates` (like I got wrong and caused 109992). As a minor bonus, it means we don't need to generate poison LLVM values for them to pass around in `OperandValue::Immediate`s.
linker: Report linker flavors incompatible with the current target
The linker flavor is checked for target compatibility even if linker is never used (e.g. we are producing a rlib).
If it causes trouble, we can move the check to `link.rs` so it will run if the linker (flavor) is actually used.
And also feature gate explicitly specifying linker flavors for tier 3 targets.
The next step is supporting all the internal linker flavors in user-visible interfaces (command line and json).
offset_of: don't require type to be `Sized`
Fixes#112051
~~The RFC [explicitly forbids](https://rust-lang.github.io/rfcs/3308-offset_of.html#limitations) non-`Sized` types, but it looks like only the fields being recursed into were checked. The sized check also seemed to have been completely missing for tuples~~
change `BorrowKind::Unique` to be a mutating `PlaceContext`
fixes#112056
I believe that `BorrowKind::Unique` is a footgun in general, so I added a FIXME and opened https://github.com/rust-lang/rust/issues/112072. This is a bit too involved for this PR though.
Optimize scalar and scalar pair representations loaded from ByRef in llvm
in https://github.com/rust-lang/rust/pull/105653 I noticed that we were generating suboptimal LLVM IR if we had a `ConstValue::ByRef` that could be represented by a `ScalarPair`. Before https://github.com/rust-lang/rust/pull/105653 this is probably rare, but after it, every slice will go down this suboptimal code path that requires LLVM to untangle a bunch of indirections and translate static allocations that are only used once to read a scalar pair from.
Go through an intermediate pair of `cc`and `lld` hints instead of mapping CLI options to `LinkerFlavor` directly, and use the target's default linker flavor as a reference.
Each of `{D,Subd}iagnosticMessage::{Str,Eager}` has a comment:
```
// FIXME(davidtwco): can a `Cow<'static, str>` be used here?
```
This commit answers that question in the affirmative. It's not the most
compelling change ever, but it might be worth merging.
This requires changing the `impl<'a> From<&'a str>` impls to `impl
From<&'static str>`, which involves a bunch of knock-on changes that
require/result in call sites being a little more precise about exactly
what kind of string they use to create errors, and not just `&str`. This
will result in fewer unnecessary allocations, though this will not have
any notable perf effects given that these are error paths.
Note that I was lazy within Clippy, using `to_string` in a few places to
preserve the existing string imprecision. I could have used `impl
Into<{D,Subd}iagnosticMessage>` in various places as is done in the
compiler, but that would have required changes to *many* call sites
(mostly changing `&format("...")` to `format!("...")`) which didn't seem
worthwhile.
Add support for LLVM SafeStack
Adds support for LLVM [SafeStack] which provides backward edge control
flow protection by separating the stack into two parts: data which is
only accessed in provable safe ways is allocated on the normal stack
(the "safe stack") and all other data is placed in a separate allocation
(the "unsafe stack").
SafeStack support is enabled by passing `-Zsanitizer=safestack`.
[SafeStack]: https://clang.llvm.org/docs/SafeStack.html
cc `@rcvalle` #39699
Adds support for LLVM [SafeStack] which provides backward edge control
flow protection by separating the stack into two parts: data which is
only accessed in provable safe ways is allocated on the normal stack
(the "safe stack") and all other data is placed in a separate allocation
(the "unsafe stack").
SafeStack support is enabled by passing `-Zsanitizer=safestack`.
[SafeStack]: https://clang.llvm.org/docs/SafeStack.html
Fix linking Mac Catalyst by including LC_BUILD_VERSION in object files
Hello. My first rustc PR!
Issue #106021 prevents Rust code from being linked into Mac Catalyst applications. Apple's LD has started requiring object files to contain version information about the platform they were built for, such as:
* the "deployment target" (minimum supported OS version),
* the SDK version
* the type of the platform (macOS/iOS/catalyst/tvOS/watchOS all have a different number).
This is currently only enforced when building for Mac Catalyst.
Rust uses the `object` crate which added support for including this information starting with `0.31.0`. ~~I upgraded it along with `thorin-dwp` so that everything depends on 0.31.
Apparently 0.31 [pulls in](https://github.com/gimli-rs/object/issues/463) `ruzstd` due to a [new ELF standard](https://maskray.me/blog/2022-09-09-zstd-compressed-debug-sections) because its `compression` feature is enabled by thorin. If you find this objectionable, let me know what the best way to avoid pulling in those dependencies might be.~~
**(`object` upgraded in https://github.com/rust-lang/rust/pull/111413)**
I then added two commits:
* The first one adds very basic, hard-coded support for calling `set_macho_build_version` for `-macabi` (Catalyst) targets, where it claims deployment target of Catalyst 14.0 and SDK of 16.2.
* The second weaves the versioning through `rust_target::spec::TargetOptions`, so that we can stick to specifying all target-related info in one place.
Kudos to ``@ara4n`` for writing [this gist](https://gist.github.com/ara4n/320a53ea768aba51afad4c9ed2168536).
