Forbid borrows and unsized types from being used as the type of a const generic under `adt_const_params`
Fixes#112219Fixes#112124Fixes#112125
### Motivation
Currently the `adt_const_params` feature allows writing `Foo<const N: [u8]>` this is entirely useless as it is not possible to write an expression which evaluates to a type that is not `Sized`. In order to actually use unsized types in const generics they are typically written as `const N: &[u8]` which *is* possible to provide a value of.
Unfortunately allowing the types of const parameters to contain references is non trivial (#120961) as it introduces a number of difficult questions about how equality of references in the type system should behave. References in the types of const generics is largely only useful for using unsized types in const generics.
This PR introduces a new feature gate `unsized_const_parameters` and moves support for `const N: [u8]` and `const N: &...` from `adt_const_params` into it. The goal here hopefully is to experiment with allowing `const N: [u8]` to work without references and then eventually completely forbid references in const generics.
Splitting this out into a new feature gate means that stabilization of `adt_const_params` does not have to resolve#120961 which is the only remaining "big" blocker for the feature. Remaining issues after this are a few ICEs and naming bikeshed for `ConstParamTy`.
### Implementation
The implementation is slightly subtle here as we would like to ensure that a stabilization of `adt_const_params` is forwards compatible with any outcome of `unsized_const_parameters`. This is inherently tricky as we do not support unstable trait implementations and we determine whether a type is valid as the type of a const parameter via a trait bound.
There are a few constraints here:
- We would like to *allow for the possibility* of adding a `Sized` supertrait to `ConstParamTy` in the event that we wind up opting to not support unsized types and instead requiring people to write the 'sized version', e.g. `const N: [u8; M]` instead of `const N: [u8]`.
- Crates should be able to enable `unsized_const_parameters` and write trait implementations of `ConstParamTy` for `!Sized` types without downstream crates that only enable `adt_const_params` being able to observe this (required for std to be able to `impl<T> ConstParamTy for [T]`
Ultimately the way this is accomplished is via having two traits (sad), `ConstParamTy` and `UnsizedConstParamTy`. Depending on whether `unsized_const_parameters` is enabled or not we change which trait is used to check whether a type is allowed to be a const parameter.
Long term (when stabilizing `UnsizedConstParamTy`) it should be possible to completely merge these traits (and derive macros), only having a single `trait ConstParamTy` and `macro ConstParamTy`.
Under `adt_const_params` it is now illegal to directly refer to `ConstParamTy` it is only used as an internal impl detail by `derive(ConstParamTy)` and checking const parameters are well formed. This is necessary in order to ensure forwards compatibility with all possible future directions for `feature(unsized_const_parameters)`.
Generally the intuition here should be that `ConstParamTy` is the stable trait that everything uses, and `UnsizedConstParamTy` is that plus unstable implementations (well, I suppose `ConstParamTy` isn't stable yet :P).
When encountering `-> Trait`, suggest `-> Box<dyn Trait>` (instead of `-> Box<Trait>`.
If there's a single returned type within the `fn`, suggest `-> impl Trait`.
No longer track "zero-width" chars in `SourceMap`, read directly from the line when calculating the `display_col` of a `BytePos`. Move `char_width` to `rustc_span` and use it from the emitter.
This change allows the following to properly align in terminals (depending on the font, the replaced control codepoints are rendered as 1 or 2 width, on my terminal they are rendered as 1, on VSCode text they are rendered as 2):
```
error: this file contains an unclosed delimiter
--> $DIR/issue-68629.rs:5:17
|
LL | ␜␟ts␀![{i
| -- unclosed delimiter
| |
| unclosed delimiter
LL | ␀␀ fn rݻoa>rݻm
| ^
```
Accurate `use` rename suggestion span
When suggesting to rename an import with `as`, use a smaller span to render the suggestion with a better format:
```
error[E0252]: the name `baz` is defined multiple times
--> $DIR/issue-25396.rs:4:5
|
LL | use foo::baz;
| -------- previous import of the module `baz` here
LL | use bar::baz;
| ^^^^^^^^ `baz` reimported here
|
= note: `baz` must be defined only once in the type namespace of this module
help: you can use `as` to change the binding name of the import
|
LL | use bar::baz as other_baz;
| ++++++++++++
```
Fix associated item removal suggestion
We were previously telling people to write what was already there, instead of removal (treating it as a `help`). We now properly suggest to remove the code that needs to be removed.
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/E0229.rs:13:25
|
LL | fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
| ^^^^^^^ associated item constraint not allowed here
|
help: consider removing this associated item binding
|
LL - fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
LL + fn baz<I>(x: &<I as Foo>::A) {}
|
```
When suggesting to rename an import with `as`, use a smaller span to
render the suggestion with a better format:
```
error[E0252]: the name `baz` is defined multiple times
--> $DIR/issue-25396.rs:4:5
|
LL | use foo::baz;
| -------- previous import of the module `baz` here
LL | use bar::baz;
| ^^^^^^^^ `baz` reimported here
|
= note: `baz` must be defined only once in the type namespace of this module
help: you can use `as` to change the binding name of the import
|
LL | use bar::baz as other_baz;
| ++++++++++++
```
We were previously telling people to write what was already there, instead of removal.
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/E0229.rs:13:25
|
LL | fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
| ^^^^^^^ associated item constraint not allowed here
|
help: consider removing this associated item binding
|
LL - fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
LL + fn baz<I>(x: &<I as Foo>::A) {}
|
```
Use ordinal number in argument error
Add an ordinal number to two argument errors ("unexpected" and "missing") for ease of understanding error.
```
error[E0061]: this function takes 3 arguments but 2 arguments were supplied
--> test.rs:11:5
|
11 | f(42, 'a');
| ^ --- 2nd argument of type `f32` is missing
|
(snip)
error[E0061]: this function takes 3 arguments but 4 arguments were supplied
--> test.rs:12:5
|
12 | f(42, 42, 1.0, 'a');
| ^ ----
| | |
| | unexpected 2nd argument of type `{integer}`
| help: remove the extra argument
```
To get an ordinal number, I copied `ordinalize` from other crate `rustc_resolve` because I think it is too much to link `rustc_resolve` for this small function. Please let me know if there is a better way.
Make parse error suggestions verbose and fix spans
Go over all structured parser suggestions and make them verbose style.
When suggesting to add or remove delimiters, turn them into multiple suggestion parts.
Go over all structured parser suggestions and make them verbose style.
When suggesting to add or remove delimiters, turn them into multiple suggestion parts.
Change E0369 to give note informations for foreign items.
Change E0369 to give note informations for foreign items.
Make it easy for developers to understand why the binop cannot be applied.
fixes#125631
```
error[E0382]: use of moved value: `t`
--> $DIR/use_of_moved_value_copy_suggestions.rs:7:9
|
LL | fn duplicate_t<T>(t: T) -> (T, T) {
| - move occurs because `t` has type `T`, which does not implement the `Copy` trait
...
LL | (t, t)
| - ^ value used here after move
| |
| value moved here
|
help: if `T` implemented `Clone`, you could clone the value
--> $DIR/use_of_moved_value_copy_suggestions.rs:4:16
|
LL | fn duplicate_t<T>(t: T) -> (T, T) {
| ^ consider constraining this type parameter with `Clone`
...
LL | (t, t)
| - you could clone this value
help: consider restricting type parameter `T`
|
LL | fn duplicate_t<T: Copy>(t: T) -> (T, T) {
| ++++++
```
The `help` is new. On ADTs, we also extend the output with span labels:
```
error[E0507]: cannot move out of static item `FOO`
--> $DIR/issue-17718-static-move.rs:6:14
|
LL | let _a = FOO;
| ^^^ move occurs because `FOO` has type `Foo`, which does not implement the `Copy` trait
|
note: if `Foo` implemented `Clone`, you could clone the value
--> $DIR/issue-17718-static-move.rs:1:1
|
LL | struct Foo;
| ^^^^^^^^^^ consider implementing `Clone` for this type
...
LL | let _a = FOO;
| --- you could clone this value
help: consider borrowing here
|
LL | let _a = &FOO;
| +
```
Suggest using type args directly instead of equality constraint
When type arguments are written erroneously using an equality constraint we suggest specifying them directly without the equality constraint.
Fixes#122162
Changes the diagnostic in the issue from:
```rust
error[E0229]: associated type bindings are not allowed here
9 | impl std::cmp::PartialEq<Rhs = T> for S {
| ^^^^^^^ associated type not allowed here
|
```
to
```rust
error[E0229]: associated type bindings are not allowed here
9 | impl std::cmp::PartialEq<Rhs = T> for S {
| ^^^^^^^ associated type not allowed here
|
help: to use `T` as a generic argument specify it directly
|
| impl std::cmp::PartialEq<T> for S {
| ~
```
weak lang items are not allowed to be #[track_caller]
For instance the panic handler will be called via this import
```rust
extern "Rust" {
#[lang = "panic_impl"]
fn panic_impl(pi: &PanicInfo<'_>) -> !;
}
```
A `#[track_caller]` would add an extra argument and thus make this the wrong signature.
The 2nd commit is a consistency rename; based on the docs [here](https://doc.rust-lang.org/unstable-book/language-features/lang-items.html) and [here](https://rustc-dev-guide.rust-lang.org/lang-items.html) I figured "lang item" is more widely used. (In the compiler output, "lang item" and "language item" seem to be pretty even.)
Detect borrow checker errors where `.clone()` would be an appropriate user action
When a value is moved twice, suggest cloning the earlier move:
```
error[E0509]: cannot move out of type `U2`, which implements the `Drop` trait
--> $DIR/union-move.rs:49:18
|
LL | move_out(x.f1_nocopy);
| ^^^^^^^^^^^
| |
| cannot move out of here
| move occurs because `x.f1_nocopy` has type `ManuallyDrop<RefCell<i32>>`, which does not implement the `Copy` trait
|
help: consider cloning the value if the performance cost is acceptable
|
LL | move_out(x.f1_nocopy.clone());
| ++++++++
```
When a value is borrowed by an `fn` call, consider if cloning the result of the call would be reasonable, and suggest cloning that, instead of the argument:
```
error[E0505]: cannot move out of `a` because it is borrowed
--> $DIR/variance-issue-20533.rs:53:14
|
LL | let a = AffineU32(1);
| - binding `a` declared here
LL | let x = bat(&a);
| -- borrow of `a` occurs here
LL | drop(a);
| ^ move out of `a` occurs here
LL | drop(x);
| - borrow later used here
|
help: consider cloning the value if the performance cost is acceptable
|
LL | let x = bat(&a).clone();
| ++++++++
```
otherwise, suggest cloning the argument:
```
error[E0505]: cannot move out of `a` because it is borrowed
--> $DIR/variance-issue-20533.rs:59:14
|
LL | let a = ClonableAffineU32(1);
| - binding `a` declared here
LL | let x = foo(&a);
| -- borrow of `a` occurs here
LL | drop(a);
| ^ move out of `a` occurs here
LL | drop(x);
| - borrow later used here
|
help: consider cloning the value if the performance cost is acceptable
|
LL - let x = foo(&a);
LL + let x = foo(a.clone());
|
```
This suggestion doesn't attempt to square out the types between what's cloned and what the `fn` expects, to allow the user to make a determination on whether to change the `fn` call or `fn` definition themselves.
Special case move errors caused by `FnOnce`:
```
error[E0382]: use of moved value: `blk`
--> $DIR/once-cant-call-twice-on-heap.rs:8:5
|
LL | fn foo<F:FnOnce()>(blk: F) {
| --- move occurs because `blk` has type `F`, which does not implement the `Copy` trait
LL | blk();
| ----- `blk` moved due to this call
LL | blk();
| ^^^ value used here after move
|
note: `FnOnce` closures can only be called once
--> $DIR/once-cant-call-twice-on-heap.rs:6:10
|
LL | fn foo<F:FnOnce()>(blk: F) {
| ^^^^^^^^ `F` is made to be an `FnOnce` closure here
LL | blk();
| ----- this value implements `FnOnce`, which causes it to be moved when called
```
Account for redundant `.clone()` calls in resulting suggestions:
```
error[E0507]: cannot move out of dereference of `S`
--> $DIR/needs-clone-through-deref.rs:15:18
|
LL | for _ in self.clone().into_iter() {}
| ^^^^^^^^^^^^ ----------- value moved due to this method call
| |
| move occurs because value has type `Vec<usize>`, which does not implement the `Copy` trait
|
note: `into_iter` takes ownership of the receiver `self`, which moves value
--> $SRC_DIR/core/src/iter/traits/collect.rs:LL:COL
help: you can `clone` the value and consume it, but this might not be your desired behavior
|
LL | for _ in <Vec<usize> as Clone>::clone(&self).into_iter() {}
| ++++++++++++++++++++++++++++++ ~
```
We use the presence of `&mut` values in a move error as a proxy for the user caring about side effects, so we don't emit a clone suggestion in that case:
```
error[E0505]: cannot move out of `s` because it is borrowed
--> $DIR/borrowck-overloaded-index-move-index.rs:53:7
|
LL | let mut s = "hello".to_string();
| ----- binding `s` declared here
LL | let rs = &mut s;
| ------ borrow of `s` occurs here
...
LL | f[s] = 10;
| ^ move out of `s` occurs here
...
LL | use_mut(rs);
| -- borrow later used here
```
We properly account for `foo += foo;` errors where we *don't* suggest `foo.clone() += foo;`, instead suggesting `foo += foo.clone();`.
---
Each commit can be reviewed in isolation. There are some "cleanup" commits, but kept them separate in order to show *why* specific changes were being made, and their effect on tests' output.
Fix#49693, CC #64167.
Add help to `hir_analysis_unrecognized_intrinsic_function`
To help remind forgetful people like me what step they forgot.
(If this just ICE'd, https://github.com/rust-lang/compiler-team/issues/620 style, the stack trace would point me here, but since there's a "nice" error that information is lost.)
Fix msg for verbose suggestions with confusable capitalization
When encountering a verbose/multipart suggestion that has changes that are only caused by different capitalization of ASCII letters that have little differenciation, expand the message to highlight that fact (like we already do for inline suggestions).
The logic to do this was already present, but implemented incorrectly.
When encountering a verbose/multipart suggestion that has changes
that are only caused by different capitalization of ASCII letters that have
little differenciation, expand the message to highlight that fact (like we
already do for inline suggestions).
The logic to do this was already present, but implemented incorrectly.
Stop bailing out from compilation just because there were incoherent traits
fixes#120343
but also has a lot of "type annotations needed" fallout. Some are fixed in the second commit.
Improve the diagnostics for unused generic parameters
* Don't emit two errors (namely E0091 *and* E0392) for unused type parameters on *lazy* type aliases
* Fix the diagnostic help message of E0392 for *lazy* type aliases: Don't talk about the “fields” of lazy type aliases (use the term “body” instead) and don't suggest `PhantomData` for them, it doesn't make much sense
* Consolidate the diagnostics for E0091 (unused type parameters in type aliases) and E0392 (unused generic parameters due to bivariance) and make it translatable
* Still keep the error codes distinct (for now)
* Naturally leads to better diagnostics for E0091
r? ```@oli-obk``` (to ballast your review load :P) or compiler
Expand the primary span of E0277 when the immediate unmet bound is not what the user wrote:
```
error[E0277]: the trait bound `i32: Bar` is not satisfied
--> f100.rs:6:6
|
6 | <i32 as Foo>::foo();
| ^^^ the trait `Bar` is not implemented for `i32`, which is required by `i32: Foo`
|
help: this trait has no implementations, consider adding one
--> f100.rs:2:1
|
2 | trait Bar {}
| ^^^^^^^^^
note: required for `i32` to implement `Foo`
--> f100.rs:3:14
|
3 | impl<T: Bar> Foo for T {}
| --- ^^^ ^
| |
| unsatisfied trait bound introduced here
```
Fix#40120.
Change the implicit `Sized` `Obligation` `Span` for call expressions to
include the whole expression. This aids the existing deduplication
machinery to reduce the number of errors caused by a single unsized
expression.
Avoid silencing relevant follow-up errors
r? `@matthewjasper`
This PR only adds new errors to tests that are already failing and fixes one ICE.
Several tests were changed to not emit new errors. I believe all of them were faulty tests, and not explicitly testing for the code that had new errors.
Fixes error count display is different when there's only one error left
Supersedes #114759
### What did I do?
I did the small change in `rustc_errors` by hand. Then I did the other changes in `/compiler` by hand, those were just find replace on `*.rs` in the workspace. The changes in run-make are find replace for `run-make` in the workspace.
All other changes are blessed using `x test TEST --bless`. I blessed the tests that were blessed in #114759.
### how to review this nightmare
ping bors with an `r+`. You should check that my logic is sound and maybe quickly scroll through the diff, but fully verifying it seems fairly hard to impossible. I did my best to do this correctly.
Thank you `@adrianEffe` for bringing this up and your initial implementation.
cc `@flip1995,` you said you want to do a subtree sync asap
cc `@RalfJung` maybe you want to do a quick subtree sync afterwards as well for Miri
r? `@WaffleLapkin`
Take into account implicit dereferences when suggesting fields.
```
error[E0609]: no field `longname` on type `Arc<S>`
--> $DIR/suggest-field-through-deref.rs:10:15
|
LL | let _ = x.longname;
| ^^^^^^^^ help: a field with a similar name exists: `long_name`
```
CC https://github.com/rust-lang/rust/issues/78374#issuecomment-719564114
Cleanup `rustc_mir_build/../check_match.rs`
The file had become pretty unwieldy, with a fair amount of duplication. As a bonus, I discovered that we weren't running some pattern checks in if-let chains.
I recommend looking commit-by-commit. The last commit is a whim, I think it makes more sense that way but I don't hold this opinion strongly.
They've been deprecated for four years.
This commit includes the following changes.
- It eliminates the `rustc_plugin_impl` crate.
- It changes the language used for lints in
`compiler/rustc_driver_impl/src/lib.rs` and
`compiler/rustc_lint/src/context.rs`. External lints are now called
"loaded" lints, rather than "plugins" to avoid confusion with the old
plugins. This only has a tiny effect on the output of `-W help`.
- E0457 and E0498 are no longer used.
- E0463 is narrowed, now only relating to unfound crates, not plugins.
- The `plugin` feature was moved from "active" to "removed".
- It removes the entire plugins chapter from the unstable book.
- It removes quite a few tests, mostly all of those in
`tests/ui-fulldeps/plugin/`.
Closes#29597.
When an associated type with GATs isn't specified in a `dyn Trait`, emit
an object safety error instead of only complaining about the missing
associated type, as it will lead the user down a path of three different
errors before letting them know that what they were trying to do is
impossible to begin with.
Fix#103155.
Mention the syntax for `use` on `mod foo;` if `foo` doesn't exist
Newcomers might get confused that `mod` is the only way of defining scopes, and that it can be used as if it were `use`.
Fix#69492.
Fix overflow checking in range patterns
When a range pattern contains an overflowing literal, if we're not careful we might not notice the overflow and use the wrapped value. This makes for confusing error messages because linting against overflowing literals is only done in a later pass. So when a range is invalid we check for overflows to provide a better error.
This check didn't use to handle negative types; this PR fixes that. First commit adds tests, second cleans up without changing behavior, third does the fix.
EDIT: while I was at it, I fixed a small annoyance about the span of the overflow lint on negated literals.
Fixes https://github.com/rust-lang/rust/issues/94239
