Support `clobber_abi` in AVR inline assembly
This PR implements the `clobber_abi` part necessary to eventually stabilize the inline assembly for AVR. This is tracked in #93335.
This is heavily inspired by the sibling-PR #131310 for the MSP430. I've explained my reasoning in the first commit message in detail, which is reproduced below for easier reviewing:
This follows the [ABI documentation] of AVR-GCC:
> The [...] call-clobbered general purpose registers (GPRs) are registers that might be destroyed (clobbered) by a function call.
>
> - **R18–R27, R30, R31**
>
> These GPRs are call clobbered. An ordinary function may use them without restoring the contents. [...]
>
> - **R0, T-Flag**
>
> The temporary register and the T-flag in SREG are also call-clobbered, but this knowledge is not exposed explicitly to the compiler (R0 is a fixed register).
Therefore this commit lists the aforementioned registers `r18–r27`, `r30` and `r31` as clobbered registers. Since the `r0` register (listed above as well) is not available in inline assembly at all (potentially because the AVR-GCC considers it a fixed register causing the register to never be used in register allocation and LLVM adopting this), there is no need to list it in the clobber list (the `r0`-variant is not even available). A comment was added to ensure, that the `r0` gets added to the clobber-list once the register gets usable in inline ASM.
Since the SREG is normally considered clobbered anyways (unless the user supplies the `preserve_flags`-option), there is no need to explicitly list a bit in this register (which is not possible to list anyways).
Note, that this commit completely ignores the case of interrupts (that are described in the ABI-specification), since every register touched in an ISR need to be saved anyways.
[ABI documentation]: https://gcc.gnu.org/wiki/avr-gcc#Call-Used_Registers
r? ``@Amanieu``
``@rustbot`` label +O-AVR
Rollup of 7 pull requests
Successful merges:
- #132782 (improvements on initial sysroot and libdir finding logics)
- #133466 (Fix typos in pin.rs)
- #133492 (bootstrap: allow skipping steps with start of path)
- #133501 (support revealing defined opaque post borrowck)
- #133530 (Use consistent wording in docs, use is zero instead of is 0)
- #133538 (Better diagnostic for fn items in variadic functions)
- #133590 (Rename `-Zparse-only`)
r? `@ghost`
`@rustbot` modify labels: rollup
support revealing defined opaque post borrowck
By adding a new `TypingMode::PostBorrowckAnalysis`. Currently only supported with the new solver and I didn't look into the way we replace `ReErased`. ``@compiler-errors`` mentioned that always using existentials may be unsound.
r? ``@compiler-errors``
Remove `HybridBitSet`
`HybridBitSet` was introduced under the name `HybridIdxSetBuf` way back in #53383 where it was a big win for NLL borrow checker performance. In #93984 the more flexible `ChunkedBitSet` was added. Uses of `HybridBitSet` have gradually disappeared (e.g. #116152) and there are now few enough that they can be replaced with `BitSet` or `ChunkedBitSet`, and `HybridBitSet` can be removed, cutting more than 700 lines of code.
r? `@Mark-Simulacrum`
As part of the larger goal of reducing `HybridBitSet` use in general.
This code is for debugging only and isn't performance sensitive, so
`ChunkedBitSet` should be fine.
The current implementation is slow because it does an operation for
every bit in the set, even zero bits. So if you have a large bitset with
many zero bits (which is common) it's very slow.
This commit improves the iterator to skip over `Zeros` chunks in a
single step, and uses the fast `BitIter` for `Mixed` chunks. It also
removes the existing `fold` implementation, which was only there because
the old iterator was slow.
- Fix a typo in a comment.
- Remove unnecessary `Chunk::` qualifiers.
- Rename `ChunkedBitIter::bitset` as `ChunkedBitIter::bit_set`, because
`bit_set` is the form used everywhere else.
- Avoid some unnecessary local variables.
`ChunkedBitSet::is_empty` currently does an unnecessary check. This
commit removes that check and adds clarifying comments and an assertion
that demonstrate why it's unnecessary.
Revert #133418 (Store coverage source regions as `Span`) due to regression #133606
This reverts commit adf9b5fcd1, reversing changes made to af1ca153d4.
Reverting #133418 due to regressions reported at #133606.
r? jieyouxu
ensure JSON-defined targets are consistent
We have a `check_consistency` check that ensures some invariants which (presumably) the rest of the compiler relies on. However, JSON targets can easily be written in a way that violates those invariants. So this PR applies the same consistency check to JSON targets that we already enforce for built-in targets.
I have converted many of the assertions in that function to new macros that show a nice error instead of a panic; if people are okay with the general approach here, I can do that for the rest of the checks as well.
Enable -Zshare-generics for inline(never) functions
This avoids inlining cross-crate generic items when possible that are
already marked inline(never), implying that the author is not intending
for the function to be inlined by callers. As such, having a local copy
may make it easier for LLVM to optimize but mostly just adds to binary
bloat and codegen time. In practice our benchmarks indicate this is
indeed a win for larger compilations, where the extra cost in dynamic
linking to these symbols is diminished compared to the advantages in
fewer copies that need optimizing in each binary.
It might also make sense it expand this with other heuristics (e.g.,
`#[cold]`) in the future, but this seems like a good starting point.
FWIW, I expect that doing cleanup in where we make the decision
what should/shouldn't be shared is also a good idea. Way too
much code needed to be tweaked to check this. But I'm hoping
to leave that for a follow-up PR rather than blocking this on it.
this is funny though! apparently tidy parsed `.gitignore`, but did not
recognize unignore lines (`!...`), so tidy was ignoring `rustc_mir_build`
this whole time (at least for some lints?).
I was surprised to find that running with `-Zparse-only` only parses the
crate root file. Other files aren't parsed because that happens later
during expansion.
This commit renames the option and updates the help message to make this
clearer.
This reduces code sizes and better respects programmer intent when
marking inline(never). Previously such a marking was essentially ignored
for generic functions, as we'd still inline them in remote crates.
always create `DefId`s for anon consts
but don't use them anywhere, we intentionally don't encode them in the crate metadata.
best reviewed by disabling whitespace.
This pretty much reimplements #133285 while adding the tests of #133455. Fixes#133064
r? `@BoxyUwU` `@compiler-errors`
This commit adds the relevant registers to the list of clobbered regis-
ters (part of #93335). This follows the [ABI documentation] of AVR-GCC:
> The [...] call-clobbered general purpose registers (GPRs) are
> registers that might be destroyed (clobbered) by a function call.
>
> - **R18–R27, R30, R31**
>
> These GPRs are call clobbered. An ordinary function may use them
> without restoring the contents. [...]
>
> - **R0, T-Flag**
>
> The temporary register and the T-flag in SREG are also call-
> clobbered, but this knowledge is not exposed explicitly to the
> compiler (R0 is a fixed register).
Therefore this commit lists the aforementioned registers `r18–r27`,
`r30` and `r31` as clobbered registers. Since the `r0` register (listed
above as well) is not available in inline assembly at all (potentially
because the AVR-GCC considers it a fixed register causing the register
to never be used in register allocation and LLVM adopting this), there
is no need to list it in the clobber list (the `r0`-variant is not even
available). A comment was added to ensure, that the `r0` gets added to
the clobber-list once the register gets usable in inline ASM.
Since the SREG is normally considered clobbered anyways (unless the user
supplies the `preserve_flags`-option), there is no need to explicitly
list a bit in this register (which is not possible to list anyways).
Note, that this commit completely ignores the case of interrupts (that
are described in the ABI-specification), since every register touched in
an ISR need to be saved anyways.
[ABI documentation]: https://gcc.gnu.org/wiki/avr-gcc#Call-Used_Registers
Small doc fixes in `rustc_codegen_ssa`
I'm trying to make a toy codegen backend for `rustc`, and I got confused for a few minutes about what `codegen_backend` was referring to in the `CodegenBackend::join_codegen` docs.
Experimentally, it looks like the result of `CodegenBackend::codegen_crate` is passed to `CodegenBackend::join_codegen`, so this updates the docs to refer to that. This time using intra-doc links to hopefully cause people to notice if that gets out of date again.
Also, added another intra-doc link nearby, on `CodegenBackend::link`, for the same reason.
Fix clobber_abi in RV32E and RV64E inline assembly
Currently clobber_abi in RV32E and RV64E inline assembly is implemented using InlineAsmClobberAbi::RiscV, but broken since x16-x31 cannot be used in RV32E and RV64E.
```
error: cannot use register `x16`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x17`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x28`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x29`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x30`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x31`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
```
r? `@Amanieu`
`@rustbot` label O-riscv +A-inline-assembly
Don't type error if we fail to coerce `Pin<T>` because it doesnt contain a ref
Fixes https://github.com/rust-lang/rust/issues/133222. Also moves some tests into a directory for better bookkeeping.
r? eholk or re-roll
Rollup of 12 pull requests
Successful merges:
- #129409 (Expand std::os::unix::fs::chown() doc with a warning)
- #133320 (Add release notes for Rust 1.83.0)
- #133368 (Delay a bug when encountering an impl with unconstrained generics in `codegen_select`)
- #133428 (Actually use placeholder regions for trait method late bound regions in `collect_return_position_impl_trait_in_trait_tys`)
- #133512 (Add `as_array` and `as_mut_array` conversion methods to slices.)
- #133519 (Check `xform_ret_ty` for WF in the new solver to improve method winnowing)
- #133520 (Structurally resolve before applying projection in borrowck)
- #133534 (extend group-forbid-always-trumps-cli test)
- #133537 ([rustdoc] Fix new clippy lints)
- #133543 ([AIX] create shim for lgammaf_r)
- #133547 (rustc_span: Replace a `HashMap<_, ()>` with `HashSet`)
- #133550 (print generated doc paths)
r? `@ghost`
`@rustbot` modify labels: rollup
Structurally resolve before applying projection in borrowck
As far as I can tell, all other `.normalize` calls in borrowck are noops and can remain that way. This is the only one that actually requires structurally resolving the type.
r? lcnr
Check `xform_ret_ty` for WF in the new solver to improve method winnowing
This is a bit interesting. Method probing in the old solver is stronger than the new solver because eagerly normalizing types causes us to check their corresponding trait goals. This is important because we don't end up checking all of the where clauses of a method when method probing; just the where clauses of the impl. i.e., for:
```
impl Foo
where
WC1,
{
fn method()
where
WC2,
{}
}
```
We only check WC1 and not WC2. This is because at this point in probing the method is instantiated w/ infer vars, and checking the where clauses in WC2 will lead to cycles if we were to check them (at least that's my understanding; I could investigate changing that in general, incl. in the old solver, but I don't have much confidence that it won't lead to really bad overflows.)
This PR chooses to emulate the old solver by just checking that the return type is WF. This is theoretically stronger, but I'm not too worried about it. I think we alternatively have several approaches we can take here, though this one seems the simplest. Thoughts?
r? lcnr
Actually use placeholder regions for trait method late bound regions in `collect_return_position_impl_trait_in_trait_tys`
So in https://github.com/rust-lang/rust/pull/113182, I introduced a "diagnostics improvement" in the form of 473c88dfb6, which changes which signature we end up instantiating with placeholder regions and which signature we end up instantiating with fresh region vars so that we have placeholders corresponding to the names of the late-bound regions coming from the *impl*.
However, this is not sound, since now we're essentially no longer proving that *all* instantiations of the trait method are compatible with an instantiation of the impl method, but vice versa (which is weaker). Let's look at the example `tests/ui/impl-trait/in-trait/do-not-imply-from-trait-impl.rs`:
```rust
trait MkStatic {
fn mk_static(self) -> &'static str;
}
impl MkStatic for &'static str {
fn mk_static(self) -> &'static str { self }
}
trait Foo {
fn foo<'a: 'static, 'late>(&'late self) -> impl MkStatic;
}
impl Foo for str {
fn foo<'a: 'static>(&'a self) -> impl MkStatic + 'static {
self
}
}
fn call_foo<T: Foo + ?Sized>(t: &T) -> &'static str {
t.foo().mk_static()
}
fn main() {
let s = call_foo(String::from("hello, world").as_str());
println!("> {s}");
}
```
To collect RPITITs, we were previously instantiating the trait signature with infer vars (`fn(&'?0 str) -> ?1t` where `?1t` is the variable we use to infer the RPITIT) and the impl signature with placeholders (there are no late-bound regions in that signature, so we just have `fn(&'a str) -> Opaque`).
Equating the signatures works, since all we do is unify `?1t` with `Opaque` and `'?0` with `'a`. However, conceptually it *shouldn't* hold, since this definition is not valid for *all* instantiations of the trait method but just the one where `'0` (i.e. `'late`) is equal to `'a` :(
## So what
This PR effectively reverts 473c88dfb6 to fix the unsoundness.
Fixes#133427
Also fixes#133425, which is actually coincidentally another instance of this bug (but not one that is weaponized into UB, just one that causes an ICE in refinement checking).
Delay a bug when encountering an impl with unconstrained generics in `codegen_select`
Despite its name, `codegen_select` is what powers `Instance::try_resolve`, which is used in pre-codegen contexts to try to resolve a method where possible. One place that it's used is in the "recursion MIR lint" that detects recursive MIR bodies.
If we encounter an impl in `codegen_select` that contains unconstrained generic parameters, we expect that impl to caused an error to be reported; however, there's no temporal guarantee that this error is reported *before* we call `codegen_select`. This is what a delayed bug is *for*, and this PR makes us use a delayed bug rather than asserting something about errors already having been emitted.
Fixes #126646
Rollup of 5 pull requests
Successful merges:
- #132410 (Some more refactorings towards removing driver queries)
- #133418 (coverage: Store coverage source regions as `Span` until codegen)
- #133498 (Add missing code examples on `LocalKey`)
- #133518 (Structurally resolve before checking `!` in HIR typeck)
- #133521 (Structurally resolve before matching on type of projection)
r? `@ghost`
`@rustbot` modify labels: rollup
