Add `Noted` marker struct that implements `EmissionGuarantee` so that
`emit_note` and `create_note` can be implemented for struct diagnostics.
Signed-off-by: David Wood <david.wood@huawei.com>
Migrate more of rustc_parse to SessionDiagnostic
Still far from complete, but I thought I'd add a checkpoint here because rebasing was starting to get annoying.
In #101230, the internal diagnostic migration lints -
`diagnostic_outside_of_impl` and `untranslatable_diagnostic` - were
modified so that they wouldn't trigger on functions annotated with
`#[rustc_lint_diagnostics]`. However, this change has to make it into
the bootstrap compiler before the `#[allow]` annotations that it aims to
remove can be removed, which is possible now that #102051 has landed.
Signed-off-by: David Wood <david.wood@huawei.com>
FIX - ambiguous Diagnostic link in docs
UPDATE - rename diagnostic_items to IntoDiagnostic and AddToDiagnostic
[Gardening] FIX - formatting via `x fmt`
FIX - rebase conflicts. NOTE: Confirm wheather or not we want to handle TargetDataLayoutErrorsWrapper this way
DELETE - unneeded allow attributes in Handler method
FIX - broken test
FIX - Rebase conflict
UPDATE - rename residual _SessionDiagnostic and fix LintDiag link
Suggested by the team in this Zulip Topic https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler
Handler already has almost all the capabilities of ParseSess when it comes to diagnostic emission, in this migration we only needed to add the ability to access source_map from the emitter in order to get a Snippet and the start_point. Not sure if this is the best way to address this gap
Introduce allow-by-default lints for checking whether diagnostics are
written in `SessionDiagnostic`/`AddSubdiagnostic` impls and whether
diagnostics are translatable. These lints can be denied for modules once
they are fully migrated to impls and translation.
Signed-off-by: David Wood <david.wood@huawei.com>
Currently, the only API for creating errors from a diagnostic derive
will emit it immediately. This makes it difficult to add subdiagnostics
to diagnostics from the derive, so add `create_{err,warning}` functions
that return the diagnostic without emitting it.
Signed-off-by: David Wood <david.wood@huawei.com>
Loading the fallback bundle in compilation sessions that won't go on to
emit any errors unnecessarily degrades compile time performance, so
lazily create the Fluent bundle when it is first required.
Signed-off-by: David Wood <david.wood@huawei.com>
It was used for deduplicating some errors for legacy code which are mostly deduplicated even without that, but at cost of global mutable state, which is not a good tradeoff.
Add an option for enabling and disabling Fluent's directionality
isolation markers in output. Disabled by default as these can render in
some terminals and applications.
Signed-off-by: David Wood <david.wood@huawei.com>
Extend loading of Fluent bundles so that bundles can be loaded from the
sysroot based on the language requested by the user, or using a nightly
flag.
Sysroot bundles are loaded from `$sysroot/share/locale/$locale/*.ftl`.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit updates the signatures of all diagnostic functions to accept
types that can be converted into a `DiagnosticMessage`. This enables
existing diagnostic calls to continue to work as before and Fluent
identifiers to be provided. The `SessionDiagnostic` derive just
generates normal diagnostic calls, so these APIs had to be modified to
accept Fluent identifiers.
In addition, loading of the "fallback" Fluent bundle, which contains the
built-in English messages, has been implemented.
Each diagnostic now has "arguments" which correspond to variables in the
Fluent messages (necessary to render a Fluent message) but no API for
adding arguments has been added yet. Therefore, diagnostics (that do not
require interpolation) can be converted to use Fluent identifiers and
will be output as before.
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
This also affects the `non_exhaustive_omitted_patterns` and
`must_not_suspend` lints as they are not stable. This also changes the
diagnostic level to pull from `unknown_lints` instead of always being
allow or deny.
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
This commit makes cfg(version) treat the nightlies
for version 1.n.0 as 1.n.0, even though that nightly
version might not have all stabilizations and features
of the released 1.n.0. This is done for greater
convenience for people who want to test a newly
stabilized feature on nightly.
For users who wish to pin nightlies, this commit adds
a -Z assume-incomplete-release option that they can
enable if there are any issues due to this change.
cleanup: Remove `ParseSess::injected_crate_name`
Its only remaining use is in pretty-printing where the necessary information can be easily re-computed.
The main change is that `UnstableOptions::from_environment` now requires
an (optional) crate name. If the crate name is unknown (`None`), then the new feature is not available and you still have to use `RUSTC_BOOTSTRAP=1`. In practice this means the feature is only available for `--crate-name`, not for `#![crate_name]`; I'm interested in supporting the second but I'm not sure how.
Other major changes:
- Added `Session::is_nightly_build()`, which uses the `crate_name` of
the session
- Added `nightly_options::match_is_nightly_build`, a convenience method
for looking up `--crate-name` from CLI arguments.
`Session::is_nightly_build()`should be preferred where possible, since
it will take into account `#![crate_name]` (I think).
- Added `unstable_features` to `rustdoc::RenderOptions`
There is a user-facing change here: things like `RUSTC_BOOTSTRAP=0` no
longer active nightly features. In practice this shouldn't be a big
deal, since `RUSTC_BOOTSTRAP` is the opposite of stable and everyone
uses `RUSTC_BOOTSTRAP=1` anyway.
- Add tests
Check against `Cheat`, not whether nightly features are allowed.
Nightly features are always allowed on the nightly channel.
- Only call `is_nightly_build()` once within a function
- Use booleans consistently for rustc_incremental
Sessions can't be passed through threads, so `read_file` couldn't take a
session. To be consistent, also take a boolean in `write_file_header`.
