Update compiler_builtins to 0.1.114
The `weak-intrinsics` feature was removed from compiler_builtins in https://github.com/rust-lang/compiler-builtins/pull/598, so dropped the `compiler-builtins-weak-intrinsics` feature from alloc/std/sysroot.
In https://github.com/rust-lang/compiler-builtins/pull/593, some builtins for f16/f128 were added. These don't work for all compiler backends, so add a `compiler-builtins-no-f16-f128` feature and disable it for cranelift and gcc.
Add NuttX based targets for RISC-V and ARM
Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. It is scalable from 8-bit to 64-bit microcontroller environments. The primary governing standards in NuttX are POSIX and ANSI standards.
NuttX adopts additional standard APIs from Unix and other common RTOSs, such as VxWorks. These APIs are used for functionality not available under the POSIX and ANSI standards. However, some APIs, like fork(), are not appropriate for deeply-embedded environments and are not implemented in NuttX.
For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.
I'll be adding libstd support for NuttX in the future, but for now I'll just add the targets.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target
> maintainers") on record to be CCed when issues arise regarding the target.
> (The mechanism to track and CC such developers may evolve over time.)
I will be the target maintainer for this target on matters that pertain to the NuttX part of the triple. For matters pertaining to the riscv or arm part of the triple, there should be no difference from all other targets. If there are issues, I will address issues regarding the target.
> Targets must use naming consistent with any existing targets; for instance, a
> target for the same CPU or OS as an existing Rust target should use the same
> name for that CPU or OS. Targets should normally use the same names and
> naming conventions as used elsewhere in the broader ecosystem beyond Rust
> (such as in other toolchains), unless they have a very good reason to
> diverge. Changing the name of a target can be highly disruptive, especially
> once the target reaches a higher tier, so getting the name right is important
> even for a tier 3 target.
This is a new supported OS, so I have taken the origin target like `riscv32imac-unknown-none-elf` or `thumbv7m-none-eabi` and changed the `os` section to `nuttx`.
> Target names should not introduce undue confusion or ambiguity unless
> absolutely necessary to maintain ecosystem compatibility. For example, if
> the name of the target makes people extremely likely to form incorrect
> beliefs about what it targets, the name should be changed or augmented to
> disambiguate it.
I feel that the target name does not introduce any ambiguity.
> Tier 3 targets may have unusual requirements to build or use, but must not
> create legal issues or impose onerous legal terms for the Rust project or for
> Rust developers or users.
The only unusual requirement for building the compiler-builtins crate is a standard RISC-V or ARM C compiler supported by cc-rs, and using this target does not require any additional software beyond what is shipped by rustup.
> The target must not introduce license incompatibilities.
All of the additional code will use Apache-2.0.
> Anything added to the Rust repository must be under the standard Rust
> license (`MIT OR Apache-2.0`).
Agreed, and there is no problem here.
> The target must not cause the Rust tools or libraries built for any other
> host (even when supporting cross-compilation to the target) to depend
> on any new dependency less permissive than the Rust licensing policy. This
> applies whether the dependency is a Rust crate that would require adding
> new license exceptions (as specified by the `tidy` tool in the
> rust-lang/rust repository), or whether the dependency is a native library
> or binary. In other words, the introduction of the target must not cause a
> user installing or running a version of Rust or the Rust tools to be
> subject to any new license requirements.
No new dependencies are added.
> Compiling, linking, and emitting functional binaries, libraries, or other
> code for the target (whether hosted on the target itself or cross-compiling
> from another target) must not depend on proprietary (non-FOSS) libraries.
> Host tools built for the target itself may depend on the ordinary runtime
> libraries supplied by the platform and commonly used by other applications
> built for the target, but those libraries must not be required for code
> generation for the target; cross-compilation to the target must not require
> such libraries at all. For instance, `rustc` built for the target may
> depend on a common proprietary C runtime library or console output library,
> but must not depend on a proprietary code generation library or code
> optimization library. Rust's license permits such combinations, but the
> Rust project has no interest in maintaining such combinations within the
> scope of Rust itself, even at tier 3.
Linking is performed by rust-lld
> "onerous" here is an intentionally subjective term. At a minimum, "onerous"
> legal/licensing terms include but are *not* limited to: non-disclosure
> requirements, non-compete requirements, contributor license agreements
> (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms,
> requirements conditional on the employer or employment of any particular
> Rust developers, revocable terms, any requirements that create liability
> for the Rust project or its developers or users, or any requirements that
> adversely affect the livelihood or prospects of the Rust project or its
> developers or users.
There are no terms. NuttX is distributed under the Apache 2.0 license.
> Neither this policy nor any decisions made regarding targets shall create any
> binding agreement or estoppel by any party. If any member of an approving
> Rust team serves as one of the maintainers of a target, or has any legal or
> employment requirement (explicit or implicit) that might affect their
> decisions regarding a target, they must recuse themselves from any approval
> decisions regarding the target's tier status, though they may otherwise
> participate in discussions.
I'm not the reviewer here.
> This requirement does not prevent part or all of this policy from being
> cited in an explicit contract or work agreement (e.g. to implement or
> maintain support for a target). This requirement exists to ensure that a
> developer or team responsible for reviewing and approving a target does not
> face any legal threats or obligations that would prevent them from freely
> exercising their judgment in such approval, even if such judgment involves
> subjective matters or goes beyond the letter of these requirements.
Again I'm not the reviewer here.
> Tier 3 targets should attempt to implement as much of the standard libraries
> as possible and appropriate (`core` for most targets, `alloc` for targets
> that can support dynamic memory allocation, `std` for targets with an
> operating system or equivalent layer of system-provided functionality), but
> may leave some code unimplemented (either unavailable or stubbed out as
> appropriate), whether because the target makes it impossible to implement or
> challenging to implement. The authors of pull requests are not obligated to
> avoid calling any portions of the standard library on the basis of a tier 3
> target not implementing those portions.
> The target must provide documentation for the Rust community explaining how
> to build for the target, using cross-compilation if possible. If the target
> supports running binaries, or running tests (even if they do not pass), the
> documentation must explain how to run such binaries or tests for the target,
> using emulation if possible or dedicated hardware if necessary.
Building is described in platform support doc, but libstd is not supported now, I'll implement it later.
> Tier 3 targets must not impose burden on the authors of pull requests, or
> other developers in the community, to maintain the target. In particular,
> do not post comments (automated or manual) on a PR that derail or suggest a
> block on the PR based on a tier 3 target. Do not send automated messages or
> notifications (via any medium, including via ``@`)` to a PR author or others
> involved with a PR regarding a tier 3 target, unless they have opted into
> such messages.
Understood.
> Backlinks such as those generated by the issue/PR tracker when linking to
> an issue or PR are not considered a violation of this policy, within
> reason. However, such messages (even on a separate repository) must not
> generate notifications to anyone involved with a PR who has not requested
> such notifications.
Understood.
> Patches adding or updating tier 3 targets must not break any existing tier 2
> or tier 1 target, and must not knowingly break another tier 3 target without
> approval of either the compiler team or the maintainers of the other tier 3
> target.
I believe I didn't break any other target.
> In particular, this may come up when working on closely related targets,
> such as variations of the same architecture with different features. Avoid
> introducing unconditional uses of features that another variation of the
> target may not have; use conditional compilation or runtime detection, as
> appropriate, to let each target run code supported by that target.
I think there are no such problems in this PR.
> Tier 3 targets must be able to produce assembly using at least one of
> rustc's supported backends from any host target. (Having support in a fork
> of the backend is not sufficient, it must be upstream.)
Yes, it use standard RISCV or ARM backend to generate assembly.
rustc_target: add known safe s390x target features
This pull request adds known safe target features for s390x (aka IBM Z systems).
Currently, these features are unstable since stabilizing the target features requires submitting proposals.
The `vector` feature was added in IBM Z13 (`arch11`), and this is a SIMD feature for the newer IBM Z systems.
The `backchain` attribute is the IBM Z way of adding frame pointers like unwinding capabilities (the "frame-pointer" switch on IBM Z and IBM POWER platforms will add _emulated_ frame pointers to the binary, which profilers can't use for unwinding the stack).
Both attributes can be applied at the LLVM module or function levels. However, the `backchain` attribute has to be enabled for all the functions in the call stack to get a successful unwind process.
Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. It is scalable from 8-bit to 64-bit microcontroller environments. The primary governing standards in NuttX are POSIX and ANSI standards.
NuttX adopts additional standard APIs from Unix and other common RTOSs, such as VxWorks. These APIs are used for functionality not available under the POSIX and ANSI standards. However, some APIs, like fork(), are not appropriate for deeply-embedded environments and are not implemented in NuttX.
For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.
I'll be adding libstd support for NuttX in the future, but for now I'll just add the targets.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target
> maintainers") on record to be CCed when issues arise regarding the target.
> (The mechanism to track and CC such developers may evolve over time.)
I will be the target maintainer for this target on matters that pertain to the NuttX part of the triple.
For matters pertaining to the riscv or arm part of the triple, there should be no difference from all other targets. If there are issues, I will address issues regarding the target.
> Targets must use naming consistent with any existing targets; for instance, a
> target for the same CPU or OS as an existing Rust target should use the same
> name for that CPU or OS. Targets should normally use the same names and
> naming conventions as used elsewhere in the broader ecosystem beyond Rust
> (such as in other toolchains), unless they have a very good reason to
> diverge. Changing the name of a target can be highly disruptive, especially
> once the target reaches a higher tier, so getting the name right is important
> even for a tier 3 target.
This is a new supported OS, so I have taken the origin target like `riscv32imac-unknown-none-elf` or `thumbv7m-none-eabi`
and changed the `os` section to `nuttx`.
> Target names should not introduce undue confusion or ambiguity unless
> absolutely necessary to maintain ecosystem compatibility. For example, if
> the name of the target makes people extremely likely to form incorrect
> beliefs about what it targets, the name should be changed or augmented to
> disambiguate it.
I feel that the target name does not introduce any ambiguity.
> Tier 3 targets may have unusual requirements to build or use, but must not
> create legal issues or impose onerous legal terms for the Rust project or for
> Rust developers or users.
The only unusual requirement for building the compiler-builtins crate is a standard RISC-V or ARM C compiler supported by cc-rs, and using this target does not require any additional software beyond what is shipped by rustup.
> The target must not introduce license incompatibilities.
All of the additional code will use Apache-2.0.
> Anything added to the Rust repository must be under the standard Rust
> license (`MIT OR Apache-2.0`).
Agreed, and there is no problem here.
> The target must not cause the Rust tools or libraries built for any other
> host (even when supporting cross-compilation to the target) to depend
> on any new dependency less permissive than the Rust licensing policy. This
> applies whether the dependency is a Rust crate that would require adding
> new license exceptions (as specified by the `tidy` tool in the
> rust-lang/rust repository), or whether the dependency is a native library
> or binary. In other words, the introduction of the target must not cause a
> user installing or running a version of Rust or the Rust tools to be
> subject to any new license requirements.
No new dependencies are added.
> Compiling, linking, and emitting functional binaries, libraries, or other
> code for the target (whether hosted on the target itself or cross-compiling
> from another target) must not depend on proprietary (non-FOSS) libraries.
> Host tools built for the target itself may depend on the ordinary runtime
> libraries supplied by the platform and commonly used by other applications
> built for the target, but those libraries must not be required for code
> generation for the target; cross-compilation to the target must not require
> such libraries at all. For instance, `rustc` built for the target may
> depend on a common proprietary C runtime library or console output library,
> but must not depend on a proprietary code generation library or code
> optimization library. Rust's license permits such combinations, but the
> Rust project has no interest in maintaining such combinations within the
> scope of Rust itself, even at tier 3.
Linking is performed by rust-lld
> "onerous" here is an intentionally subjective term. At a minimum, "onerous"
> legal/licensing terms include but are *not* limited to: non-disclosure
> requirements, non-compete requirements, contributor license agreements
> (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms,
> requirements conditional on the employer or employment of any particular
> Rust developers, revocable terms, any requirements that create liability
> for the Rust project or its developers or users, or any requirements that
> adversely affect the livelihood or prospects of the Rust project or its
> developers or users.
There are no terms. NuttX is distributed under the Apache 2.0 license.
> Neither this policy nor any decisions made regarding targets shall create any
> binding agreement or estoppel by any party. If any member of an approving
> Rust team serves as one of the maintainers of a target, or has any legal or
> employment requirement (explicit or implicit) that might affect their
> decisions regarding a target, they must recuse themselves from any approval
> decisions regarding the target's tier status, though they may otherwise
> participate in discussions.
I'm not the reviewer here.
> This requirement does not prevent part or all of this policy from being
> cited in an explicit contract or work agreement (e.g. to implement or
> maintain support for a target). This requirement exists to ensure that a
> developer or team responsible for reviewing and approving a target does not
> face any legal threats or obligations that would prevent them from freely
> exercising their judgment in such approval, even if such judgment involves
> subjective matters or goes beyond the letter of these requirements.
Again I'm not the reviewer here.
> Tier 3 targets should attempt to implement as much of the standard libraries
> as possible and appropriate (`core` for most targets, `alloc` for targets
> that can support dynamic memory allocation, `std` for targets with an
> operating system or equivalent layer of system-provided functionality), but
> may leave some code unimplemented (either unavailable or stubbed out as
> appropriate), whether because the target makes it impossible to implement or
> challenging to implement. The authors of pull requests are not obligated to
> avoid calling any portions of the standard library on the basis of a tier 3
> target not implementing those portions.
> The target must provide documentation for the Rust community explaining how
> to build for the target, using cross-compilation if possible. If the target
> supports running binaries, or running tests (even if they do not pass), the
> documentation must explain how to run such binaries or tests for the target,
> using emulation if possible or dedicated hardware if necessary.
Building is described in platform support doc, but libstd is not supported now,
I'll implement it later.
> Tier 3 targets must not impose burden on the authors of pull requests, or
> other developers in the community, to maintain the target. In particular,
> do not post comments (automated or manual) on a PR that derail or suggest a
> block on the PR based on a tier 3 target. Do not send automated messages or
> notifications (via any medium, including via `@`) to a PR author or others
> involved with a PR regarding a tier 3 target, unless they have opted into
> such messages.
Understood.
> Backlinks such as those generated by the issue/PR tracker when linking to
> an issue or PR are not considered a violation of this policy, within
> reason. However, such messages (even on a separate repository) must not
> generate notifications to anyone involved with a PR who has not requested
> such notifications.
Understood.
> Patches adding or updating tier 3 targets must not break any existing tier 2
> or tier 1 target, and must not knowingly break another tier 3 target without
> approval of either the compiler team or the maintainers of the other tier 3
> target.
I believe I didn't break any other target.
> In particular, this may come up when working on closely related targets,
> such as variations of the same architecture with different features. Avoid
> introducing unconditional uses of features that another variation of the
> target may not have; use conditional compilation or runtime detection, as
> appropriate, to let each target run code supported by that target.
I think there are no such problems in this PR.
> Tier 3 targets must be able to produce assembly using at least one of
> rustc's supported backends from any host target. (Having support in a fork
> of the backend is not sufficient, it must be upstream.)
Yes, it use standard RISCV or ARM backend to generate assembly.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
In llvm/llvm-project@f0eb5587ce all
support for 3DNow! intrinsics and instructions were removed. Per the commit message
there, only AMD chips between 1998 and 2011 or so actually supported
these instructions, and they were effectively replaced by SSE which was
available on many more chips. I'd be very surprised if anyone had ever
used these from Rust.
... this is a special attribute that was made to be a target-feature in
LLVM 18+, but in all previous versions, this "feature" is a naked
attribute. We will have to handle this situation differently than all
other target-features.
Fill out target-spec metadata for all targets
**What does this PR try to resolve?**
This PR completes the target-spec metadata fields for all targets. This is required for a corresponding Cargo PR which adds a check for whether a target supports building the standard library when the `-Zbuild-std=std` flag is passed ([see this issue](https://github.com/rust-lang/wg-cargo-std-aware/issues/87). This functionality in Cargo is reliant on the output of `--print=target-spec-json`.
**How should we test and review this PR?**
Check that a given target-spec metadata has been updated with:
```
$ ./x.py build library/std
$ build/host/stage1/bin/rustc --print=target-spec-json --target <target_name> -Zunstable-options
```
**Additional Information**
A few things to note:
* Where a targets 'std' or 'host tools' support is listed as '?' in the rust docs, these are left as 'None' with this PR. The corresponding changes in cargo will only reject an attempt to build std if the 'std' field is 'Some(false)'. In the case it is 'None', cargo will continue trying to build
* There's no rush for this to be merged. I understand that the format for this is not finalised yet.
* Related: #120745
Remove the unstable `extern "wasm"` ABI (`wasm_abi` feature tracked
in #83788).
As discussed in https://github.com/rust-lang/rust/pull/127513#issuecomment-2220410679
and following, this ABI is a failed experiment that did not end
up being used for anything. Keeping support for this ABI in LLVM 19
would require us to switch wasm targets to the `experimental-mv`
ABI, which we do not want to do.
It should be noted that `Abi::Wasm` was internally used for two
things: The `-Z wasm-c-abi=legacy` ABI that is still used by
default on some wasm targets, and the `extern "wasm"` ABI. Despite
both being `Abi::Wasm` internally, they were not the same. An
explicit `extern "wasm"` additionally enabled the `+multivalue`
feature.
I've opted to remove `Abi::Wasm` in this patch entirely, instead
of keeping it as an ABI with only internal usage. Both
`-Z wasm-c-abi` variants are now treated as part of the normal
C ABI, just with different different treatment in
adjust_for_foreign_abi.
Fix 32-bit Arm reg classes by hierarchically sorting them
We were rejecting legal `asm!` because we were asking for the "greatest" feature that includes a register class, instead of the "least" feature that includes a register class. This was only revealed on certain 32-bit Arm targets because not all have the same register limitations.
This is a somewhat hacky solution, but other solutions would require potentially rearchitecting how the internals of parsing or rejecting register classes work for all targets.
Fixes#126797
r? ``@Amanieu``
Add `f16` inline ASM support for 32-bit ARM
Adds `f16` inline ASM support for 32-bit ARM. SIMD vector types are taken from [here](https://developer.arm.com/architectures/instruction-sets/intrinsics/#f:`@navigationhierarchiesreturnbasetype=[float]&f:@navigationhierarchieselementbitsize=[16]&f:@navigationhierarchiesarchitectures=[A32]).`
Relevant issue: #125398
Tracking issue: #116909
`@rustbot` label +F-f16_and_f128
Add `f16` inline ASM support for RISC-V
This PR adds `f16` inline ASM support for RISC-V. A `FIXME` is left for `f128` support as LLVM does not support the required `Q` (Quad-Precision Floating-Point) extension yet.
Relevant issue: #125398
Tracking issue: #116909
`@rustbot` label +F-f16_and_f128
Expand `avx512_target_feature` to include VEX variants
Added 5 new target features for x86:
- `AVX-IFMA`
- `AVX-NE-CONVERT`
- `AVX-VNNI`
- `AVX-VNNI_INT8`
- `AVX-VNNI_INT16`
Both LLVM and GCC already have support for these.
See also the [stdarch PR](https://github.com/rust-lang/stdarch/pull/1586)
Clean up some comments near `use` declarations
#125443 will reformat all `use` declarations in the repository. There are a few edge cases involving comments on `use` declarations that require care. This PR cleans up some clumsy comment cases, taking us a step closer to #125443 being able to merge.
r? ``@lqd``
Add std Xtensa targets support
Adds std Xtensa targets. This enables using Rust on ESP32, ESP32-S2 and ESP32-S3 chips.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on
record to be CCed when issues arise regarding the target. (The mechanism to track and CC such
developers may evolve over time.)
`@MabezDev,` `@ivmarkov` and I (`@SergioGasquez)` will maintain the targets.
> Targets must use naming consistent with any existing targets; for instance, a target for the same
CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should
normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond
Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the
name of a target can be highly disruptive, especially once the target reaches a higher tier, so
getting the name right is important even for a tier 3 target.
The target triple is consistent with other targets.
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to
maintain ecosystem compatibility. For example, if the name of the target makes people extremely
likely to form incorrect beliefs about what it targets, the name should be changed or augmented to
disambiguate it.
> If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known
to cause issues in Cargo.
We follow the same naming convention as other targets.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or
impose onerous legal terms for the Rust project or for Rust developers or users.
The target does not introduce any legal issues.
> The target must not introduce license incompatibilities.
There are no license incompatibilities
> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Everything added is under that licenses
> The target must not cause the Rust tools or libraries built for any other host (even when
supporting cross-compilation to the target) to depend on any new dependency less permissive than the
Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding
new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether
the dependency is a native library or binary. In other words, the introduction of the target must
not cause a user installing or running a version of Rust or the Rust tools to be subject to any new
license requirements.
Requirements are not changed for any other target.
> Compiling, linking, and emitting functional binaries, libraries, or other code for the target
(whether hosted on the target itself or cross-compiling from another target) must not depend on
proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary
runtime libraries supplied by the platform and commonly used by other applications built for the
target, but those libraries must not be required for code generation for the target;
cross-compilation to the target must not require such libraries at all. For instance, rustc built
for the target may depend on a common proprietary C runtime library or console output library, but
must not depend on a proprietary code generation library or code optimization library. Rust's
license permits such combinations, but the Rust project has no interest in maintaining such
combinations within the scope of Rust itself, even at tier 3.
The linker used by the targets is the GCC linker from the GCC toolchain cross-compiled for Xtensa.
GNU GPL.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms
include but are not limited to: non-disclosure requirements, non-compete requirements, contributor
license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements
conditional on the employer or employment of any particular Rust developers, revocable terms, any
requirements that create liability for the Rust project or its developers or users, or any
requirements that adversely affect the livelihood or prospects of the Rust project or its developers
or users.
No such terms exist for this target
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or
estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a
target, or has any legal or employment requirement (explicit or implicit) that might affect their
decisions regarding a target, they must recuse themselves from any approval decisions regarding the
target's tier status, though they may otherwise participate in discussions.
> This requirement does not prevent part or all of this policy from being cited in an explicit
contract or work agreement (e.g. to implement or maintain support for a target). This requirement
exists to ensure that a developer or team responsible for reviewing and approving a target does not
face any legal threats or obligations that would prevent them from freely exercising their judgment
in such approval, even if such judgment involves subjective matters or goes beyond the letter of
these requirements.
Understood
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and
appropriate (core for most targets, alloc for targets that can support dynamic memory allocation,
std for targets with an operating system or equivalent layer of system-provided functionality), but
may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether
because the target makes it impossible to implement or challenging to implement. The authors of pull
requests are not obligated to avoid calling any portions of the standard library on the basis of a
tier 3 target not implementing those portions.
The targets implement libStd almost in its entirety, except for the missing support for process, as
this is a bare metal platform. The process `sys\unix` module is currently stubbed to return "not
implemented" errors.
> The target must provide documentation for the Rust community explaining how to build for the
target, using cross-compilation if possible. If the target supports running binaries, or running
tests (even if they do not pass), the documentation must explain how to run such binaries or tests
for the target, using emulation if possible or dedicated hardware if necessary.
Here is how to build for the target https://docs.esp-rs.org/book/installation/riscv-and-xtensa.html
and it also covers how to run binaries on the target.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the
community, to maintain the target. In particular, do not post comments (automated or manual) on a PR
that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or
notifications (via any medium, including via `@)` to a PR author or others involved with a PR
regarding a tier 3 target, unless they have opted into such messages.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not
considered a violation of this policy, within reason. However, such messages (even on a separate
repository) must not generate notifications to anyone involved with a PR who has not requested such
notifications.
Understood
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and
must not knowingly break another tier 3 target without approval of either the compiler team or the
maintainers of the other tier 3 target.
> In particular, this may come up when working on closely related targets, such as variations of the
same architecture with different features. Avoid introducing unconditional uses of features that
another variation of the target may not have; use conditional compilation or runtime detection, as
appropriate, to let each target run code supported by that target.
No other targets should be affected
> Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends
from any host target.
It can produce assembly, but it requires a custom LLVM with Xtensa support
(https://github.com/espressif/llvm-project/). The patches are trying to be upstreamed
(https://github.com/espressif/llvm-project/issues/4)
This makes their intent and expected location clearer. We see some
examples where these comments were not clearly separate from `use`
declarations, which made it hard to understand what the comment is
describing.
Add `target_env = "p1"` to the `wasm32-wasip1` target
This commit sets the `target_env` key for the
`wasm32-wasi{,p1,p1-threads}` targets to the string `"p1"`. This mirrors how the `wasm32-wasip2` target has `target_env = "p2"`. The intention of this is to more easily detect each target in downstream crates to enable adding custom code per-target.
cc #125803
<!--
If this PR is related to an unstable feature or an otherwise tracked effort,
please link to the relevant tracking issue here. If you don't know of a related
tracking issue or there are none, feel free to ignore this.
This PR will get automatically assigned to a reviewer. In case you would like
a specific user to review your work, you can assign it to them by using
r? <reviewer name>
-->
Add no_std Xtensa targets support
Adds no_std Xtensa targets. This enables using Rust on ESP32, ESP32-S2 and ESP32-S3 chips.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
`@MabezDev` and I (`@SergioGasquez)` will maintain the targets.
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
The target triple is consistent with other targets.
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
We follow the same naming convention as other targets.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
The target does not introduce any legal issues.
> The target must not introduce license incompatibilities.
There are no license incompatibilities
> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Everything added is under that licenses
> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
Requirements are not changed for any other target.
> Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
The linker used by the targets is the GCC linker from the GCC toolchain cross-compiled for Xtensa. GNU GPL.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
No such terms exist for this target
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Understood
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
The target already implements core.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Here is how to build for the target https://docs.esp-rs.org/book/installation/riscv-and-xtensa.html and it also covers how to run binaries on the target.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
Understood
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
No other targets should be affected
> Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target.
It can produce assembly, but it requires a custom LLVM with Xtensa support (https://github.com/espressif/llvm-project/). The patches are trying to be upstreamed (https://github.com/espressif/llvm-project/issues/4)
Nvptx remove direct passmode
This PR does what should have been done in #117671. That is fully avoid using the `PassMode::Direct` for `extern "C" fn` for `nvptx64-nvidia-cuda` and enable the compatibility test. `@RalfJung` [pointed me in the right direction](https://github.com/rust-lang/rust/issues/117480#issuecomment-2137712501) for solving this issue.
There are still some ABI bugs after this PR is merged. These ABI tests are created based on what is actually correct, and since they continue passing with even more of them enabled things are improving. I don't have the time to tackle all the remaining issues right now, but I think getting these improvements merged is very valuable in themselves and plan to tackle more of them long term.
This also doesn't remove the use of `PassMode::Direct` for `extern "ptx-kernel" fn`. This was also not trivial to make work. And since the ABI is hidden behind an unstable feature it's less urgent.
I don't know if it's correct to request `@RalfJung` as a reviewer (due to team structures), but he helped me a lot to figure out this stuff. If that's not appropriate then `@davidtwco` would be a good candidate since he know about this topic from #117671
r? `@RalfJung`
This commit sets the `target_env` key for the
`wasm32-wasi{,p1,p1-threads}` targets to the string `"p1"`. This mirrors
how the `wasm32-wasip2` target has `target_env = "p2"`. The intention of
this is to more easily detect each target in downstream crates to enable
adding custom code per-target.
cc #125803
