Autodiff Upstreaming - rustc_codegen_ssa, rustc_middle
This PR should not be merged until the rustc_codegen_llvm part is merged.
I will also alter it a little based on what get's shaved off from the cg_llvm PR,
and address some of the feedback I received in the other PR (including cleanups).
I am putting it already up to
1) Discuss with `@jieyouxu` if there is more work needed to add tests to this and
2) Pray that there is someone reviewing who can tell me why some of my autodiff invocations get lost.
Re 1: My test require fat-lto. I also modify the compilation pipeline. So if there are any other llvm-ir tests in the same compilation unit then I will likely break them. Luckily there are two groups who currently have the same fat-lto requirement for their GPU code which I have for my autodiff code and both groups have some plans to enable support for thin-lto. Once either that work pans out, I'll copy it over for this feature. I will also work on not changing the optimization pipeline for functions not differentiated, but that will require some thoughts and engineering, so I think it would be good to be able to run the autodiff tests isolated from the rest for now. Can you guide me here please?
For context, here are some of my tests in the samples folder: https://github.com/EnzymeAD/rustbook
Re 2: This is a pretty serious issue, since it effectively prevents publishing libraries making use of autodiff: https://github.com/EnzymeAD/rust/issues/173. For some reason my dummy code persists till the end, so the code which calls autodiff, deletes the dummy, and inserts the code to compute the derivative never gets executed. To me it looks like the rustc_autodiff attribute just get's dropped, but I don't know WHY? Any help would be super appreciated, as rustc queries look a bit voodoo to me.
Tracking:
- https://github.com/rust-lang/rust/issues/124509
r? `@jieyouxu`
Fix deduplication mismatches in vtables leading to upcasting unsoundness
We currently have two cases where subtleties in supertraits can trigger disagreements in the vtable layout, e.g. leading to a different vtable layout being accessed at a callsite compared to what was prepared during unsizing. Namely:
### #135315
In this example, we were not normalizing supertraits when preparing vtables. In the example,
```
trait Supertrait<T> {
fn _print_numbers(&self, mem: &[usize; 100]) {
println!("{mem:?}");
}
}
impl<T> Supertrait<T> for () {}
trait Identity {
type Selff;
}
impl<Selff> Identity for Selff {
type Selff = Selff;
}
trait Middle<T>: Supertrait<()> + Supertrait<T> {
fn say_hello(&self, _: &usize) {
println!("Hello!");
}
}
impl<T> Middle<T> for () {}
trait Trait: Middle<<() as Identity>::Selff> {}
impl Trait for () {}
fn main() {
(&() as &dyn Trait as &dyn Middle<()>).say_hello(&0);
}
```
When we prepare `dyn Trait`, we see a supertrait of `Middle<<() as Identity>::Selff>`, which itself has two supertraits `Supertrait<()>` and `Supertrait<<() as Identity>::Selff>`. These two supertraits are identical, but they are not duplicated because we were using structural equality and *not* considering normalization. This leads to a vtable layout with two trait pointers.
When we upcast to `dyn Middle<()>`, those two supertraits are now the same, leading to a vtable layout with only one trait pointer. This leads to an offset error, and we call the wrong method.
### #135316
This one is a bit more interesting, and is the bulk of the changes in this PR. It's a bit similar, except it uses binder equality instead of normalization to make the compiler get confused about two vtable layouts. In the example,
```
trait Supertrait<T> {
fn _print_numbers(&self, mem: &[usize; 100]) {
println!("{mem:?}");
}
}
impl<T> Supertrait<T> for () {}
trait Trait<T, U>: Supertrait<T> + Supertrait<U> {
fn say_hello(&self, _: &usize) {
println!("Hello!");
}
}
impl<T, U> Trait<T, U> for () {}
fn main() {
(&() as &'static dyn for<'a> Trait<&'static (), &'a ()>
as &'static dyn Trait<&'static (), &'static ()>)
.say_hello(&0);
}
```
When we prepare the vtable for `dyn for<'a> Trait<&'static (), &'a ()>`, we currently consider the PolyTraitRef of the vtable as the key for a supertrait. This leads two two supertraits -- `Supertrait<&'static ()>` and `for<'a> Supertrait<&'a ()>`.
However, we can upcast[^up] without offsetting the vtable from `dyn for<'a> Trait<&'static (), &'a ()>` to `dyn Trait<&'static (), &'static ()>`. This is just instantiating the principal trait ref for a specific `'a = 'static`. However, when considering those supertraits, we now have only one distinct supertrait -- `Supertrait<&'static ()>` (which is deduplicated since there are two supertraits with the same substitutions). This leads to similar offsetting issues, leading to the wrong method being called.
[^up]: I say upcast but this is a cast that is allowed on stable, since it's not changing the vtable at all, just instantiating the binder of the principal trait ref for some lifetime.
The solution here is to recognize that a vtable isn't really meaningfully higher ranked, and to just treat a vtable as corresponding to a `TraitRef` so we can do this deduplication more faithfully. That is to say, the vtable for `dyn for<'a> Tr<'a>` and `dyn Tr<'x>` are always identical, since they both would correspond to a set of free regions on an impl... Do note that `Tr<for<'a> fn(&'a ())>` and `Tr<fn(&'static ())>` are still distinct.
----
There's a bit more that can be cleaned up. In codegen, we can stop using `PolyExistentialTraitRef` basically everywhere. We can also fix SMIR to stop storing `PolyExistentialTraitRef` in its vtable allocations.
As for testing, it's difficult to actually turn this into something that can be tested with `rustc_dump_vtable`, since having multiple supertraits that are identical is a recipe for ambiguity errors. Maybe someone else is more creative with getting that attr to work, since the tests I added being run-pass tests is a bit unsatisfying. Miri also doesn't help here, since it doesn't really generate vtables that are offset by an index in the same way as codegen.
r? `@lcnr` for the vibe check? Or reassign, idk. Maybe let's talk about whether this makes sense.
<sup>(I guess an alternative would also be to not do any deduplication of vtable supertraits (or only a really conservative subset) rather than trying to normalize and deduplicate more faithfully here. Not sure if that works and is sufficient tho.)</sup>
cc `@steffahn` -- ty for the minimizations
cc `@WaffleLapkin` -- since you're overseeing the feature stabilization :3
Fixes#135315Fixes#135316
Target option to require explicit cpu
Some targets have many different CPUs and no generic CPU that can be used as a default. For these targets, the user needs to explicitly specify a CPU through `-C target-cpu=`.
Add an option for targets and an error message if no CPU is set.
This affects the proposed amdgpu and avr targets.
amdgpu tracking issue: #135024
AVR MCP: https://github.com/rust-lang/compiler-team/issues/800
Lower index bounds checking to `PtrMetadata`, this time with the right fake borrow semantics 😸
Change `Rvalue::RawRef` to take a `RawRefKind` instead of just a `Mutability`. Then introduce `RawRefKind::FakeForPtrMetadata` and use that for lowering index bounds checking to a `PtrMetadata`. This new `RawRefKind::FakeForPtrMetadata` acts like a shallow fake borrow in borrowck, which mimics the semantics of the old `Rvalue::Len` operation we're replacing.
We can then use this `RawRefKind` instead of using a span desugaring hack in CTFE.
cc ``@scottmcm`` ``@RalfJung``
- Don't show environment variables. Seeing PATH is almost never useful, and it can be extremely long.
- For .rlibs in the sysroot, replace crate hashes with a `"-*"` string. This will expand to the full crate name when pasted into the shell.
- Move `.rlib` to outside the glob.
- Abbreviate the sysroot path to `<sysroot>` wherever it appears in the arguments.
This also adds an example of the linker output as a run-make test. Currently it only runs on x86_64-unknown-linux-gnu, because each platform has its own linker arguments. So that it's stable across machines, pass BUILD_ROOT as an argument through compiletest through to run-make tests.
- Only use linker-flavor=gnu-cc if we're actually going to compare the output. It doesn't exist on MacOS.
Add `#[optimize(none)]`
cc #54882
This extends the `optimize` attribute to add `none`, which corresponds to the LLVM `OptimizeNone` attribute.
Not sure if an MCP is required for this, happy to file one if so.
Separate Builder methods from tcx
As part of the autodiff upstreaming we noticed, that it would be nice to have various builder methods available without the TypeContext, which prevents the normal CodegenCx to be passed around between threads.
We introduce a SimpleCx which just owns the llvm module and llvm context, to encapsulate them.
The previous CodegenCx now implements deref and forwards access to the llvm module or context to it's SimpleCx sub-struct. This gives us a bit more flexibility, because now we can pass (or construct) the SimpleCx in locations where we don't have enough information to construct a CodegenCx, or are not able to pass it around due to the tcx lifetimes (and it not implementing send/sync).
This also introduces an SBuilder, similar to the SimpleCx. The SBuilder uses a SimpleCx, whereas the existing Builder uses the larger CodegenCx. I will push updates to make implementations generic (where possible) to be implemented once and work for either of the two. I'll also clean up the leftover code.
`call` is a bit tricky, because it requires a tcx, I probably need to duplicate it after all.
Tracking:
- https://github.com/rust-lang/rust/issues/124509
These cannot be silenced with a CLI flag, and are not useful to warn
about. They can still be viewed for debugging purposes using
`RUSTC_LOG=rustc_codegen_ssa:🔗:back`.
support wasm inline assembly in `naked_asm!`
fixes https://github.com/rust-lang/rust/issues/135518
Webassembly was overlooked previously, but now `naked_asm!` and `#[naked]` functions work on the webassembly targets.
Or, they almost do right now. I guess this is no surprise, but the `wasm32-unknown-unknown` target causes me some trouble. I'll add some inline comments with more details.
r? ```````@bjorn3```````
cc ```````@daxpedda,``````` ```````@tgross35```````
Update our range `assume`s to the format that LLVM prefers
I found out in https://github.com/llvm/llvm-project/issues/123278#issuecomment-2597440158 that the way I started emitting the `assume`s in #109993 was suboptimal, and as seen in that LLVM issue the way we're doing it -- with two `assume`s sometimes -- can at times lead to CVP/SCCP not realize what's happening because one of them turns into a `ne` instead of conveying a range.
So this updates how it's emitted from
```
assume( x >= LOW );
assume( x <= HIGH );
```
or
```
// (for ranges that wrap the range)
assume( (x <= LOW) | (x >= HIGH) );
```
to
```
assume( (x - LOW) <= (HIGH - LOW) );
```
so that we don't need multiple `icmp`s nor multiple `assume`s for a single value, and both wrappping and non-wrapping ranges emit the same shape.
(And we don't bother emitting the subtraction if `LOW` is zero, since that's trivial for us to check too.)
bump compiler and tools to windows 0.59, bootstrap to 0.57
This bumps compiler and tools to windows 0.59 (temporary dupes version, as `sysinfo` still depend on <= 0.57).
Bootstrap bumps only to 0.57 (the same sysinfo dep).
This additionally resolves my comment https://github.com/rust-lang/rust/pull/130874#issuecomment-2393562071
Will work on it in follow up pr: There still some sus imports for `rustc_driver.dll` like ws2_32 or RoOriginateErrorW, but i will look at them later.
remove support for the (unstable) #[start] attribute
As explained by `@Noratrieb:`
`#[start]` should be deleted. It's nothing but an accidentally leaked implementation detail that's a not very useful mix between "portable" entrypoint logic and bad abstraction.
I think the way the stable user-facing entrypoint should work (and works today on stable) is pretty simple:
- `std`-using cross-platform programs should use `fn main()`. the compiler, together with `std`, will then ensure that code ends up at `main` (by having a platform-specific entrypoint that gets directed through `lang_start` in `std` to `main` - but that's just an implementation detail)
- `no_std` platform-specific programs should use `#![no_main]` and define their own platform-specific entrypoint symbol with `#[no_mangle]`, like `main`, `_start`, `WinMain` or `my_embedded_platform_wants_to_start_here`. most of them only support a single platform anyways, and need cfg for the different platform's ways of passing arguments or other things *anyways*
`#[start]` is in a super weird position of being neither of those two. It tries to pretend that it's cross-platform, but its signature is a total lie. Those arguments are just stubbed out to zero on ~~Windows~~ wasm, for example. It also only handles the platform-specific entrypoints for a few platforms that are supported by `std`, like Windows or Unix-likes. `my_embedded_platform_wants_to_start_here` can't use it, and neither could a libc-less Linux program.
So we have an attribute that only works in some cases anyways, that has a signature that's a total lie (and a signature that, as I might want to add, has changed recently, and that I definitely would not be comfortable giving *any* stability guarantees on), and where there's a pretty easy way to get things working without it in the first place.
Note that this feature has **not** been RFCed in the first place.
*This comment was posted [in May](https://github.com/rust-lang/rust/issues/29633#issuecomment-2088596042) and so far nobody spoke up in that issue with a usecase that would require keeping the attribute.*
Closes https://github.com/rust-lang/rust/issues/29633
try-job: x86_64-gnu-nopt
try-job: x86_64-msvc-1
try-job: x86_64-msvc-2
try-job: test-various
Revert most of #133194 (except the test and the comment fixes). Then refix
not emitting locations at all when the correct location discriminator value
exceeds LLVM's capacity.
Some targets have many different CPUs and no generic CPU that can be
used as a default. For these targets, the user needs to explicitly
specify a CPU through `-C target-cpu=`.
Add an option for targets and an error message if no CPU is set.
This affects the proposed amdgpu and avr targets.
If we build the standard library with wasm-eh then we need to link
with `-fwasm-exceptions` even if we compile with `panic=abort`
Without this change, linking a `panic=abort` crate fails with:
`undefined symbol: __cpp_exception`.
Followup to #131830.
Rename `BitSet` to `DenseBitSet`
r? `@Mark-Simulacrum` as you requested this in https://github.com/rust-lang/rust/pull/134438#discussion_r1890659739 after such a confusion.
This PR renames `BitSet` to `DenseBitSet` to make it less obvious as the go-to solution for bitmap needs, as well as make its representation (and positives/negatives) clearer. It also expands the comments there to hopefully make it clearer when it's not a good fit, with some alternative bitsets types.
(This migrates the subtrees cg_gcc and clippy to use the new name in separate commits, for easier review by their respective owners, but they can obvs be squashed)
add `-Zmin-function-alignment`
tracking issue: https://github.com/rust-lang/rust/issues/82232
This PR adds the `-Zmin-function-alignment=<align>` flag, that specifies a minimum alignment for all* functions.
### Motivation
This feature is requested by RfL [here](https://github.com/rust-lang/rust/issues/128830):
> i.e. the equivalents of `-fmin-function-alignment` ([GCC](https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#index-fmin-function-alignment_003dn), Clang does not support it) / `-falign-functions` ([GCC](https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#index-falign-functions), [Clang](https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang1-falign-functions)).
>
> For the Linux kernel, the behavior wanted is that of GCC's `-fmin-function-alignment` and Clang's `-falign-functions`, i.e. align all functions, including cold functions.
>
> There is [`feature(fn_align)`](https://github.com/rust-lang/rust/issues/82232), but we need to do it globally.
### Behavior
The `fn_align` feature does not have an RFC. It was decided at the time that it would not be necessary, but maybe we feel differently about that now? In any case, here are the semantics of this flag:
- `-Zmin-function-alignment=<align>` specifies the minimum alignment of all* functions
- the `#[repr(align(<align>))]` attribute can be used to override the function alignment on a per-function basis: when `-Zmin-function-alignment` is specified, the attribute's value is only used when it is higher than the value passed to `-Zmin-function-alignment`.
- the target may decide to use a higher value (e.g. on x86_64 the minimum that LLVM generates is 16)
- The highest supported alignment in rust is `2^29`: I checked a bunch of targets, and they all emit the `.p2align 29` directive for targets that align functions at all (some GPU stuff does not have function alignment).
*: Only with `build-std` would the minimum alignment also be applied to `std` functions.
---
cc `@ojeda`
r? `@workingjubilee` you were active on the tracking issue
Use llvm.memset.p0i8.* to initialize all same-bytes arrays
Similar to #43488
debug builds can now handle `0x0101_u16` and other multi-byte scalars that have all the same bytes (instead of special casing just `0`)
Adds `#[rustc_force_inline]` which is similar to always inlining but
reports an error if the inlining was not possible, and which always
attempts to inline annotated items, regardless of optimisation levels.
It can only be applied to free functions to guarantee that the MIR
inliner will be able to resolve calls.
Add support for wasm exception handling to Emscripten target
This is a draft because we need some additional setting for the Emscripten target to select between the old exception handling and the new exception handling. I don't know how to add a setting like that, would appreciate advice from Rust folks. We could maybe choose to use the new exception handling if `Ctarget-feature=+exception-handling` is passed? I tried this but I get errors from llvm so I'm not doing it right.
Add a notion of "some ABIs require certain target features"
I think I finally found the right shape for the data and checks that I recently added in https://github.com/rust-lang/rust/pull/133099, https://github.com/rust-lang/rust/pull/133417, https://github.com/rust-lang/rust/pull/134337: we have a notion of "this ABI requires the following list of target features, and it is incompatible with the following list of target features". Both `-Ctarget-feature` and `#[target_feature]` are updated to ensure we follow the rules of the ABI. This removes all the "toggleability" stuff introduced before, though we do keep the notion of a fully "forbidden" target feature -- this is needed to deal with target features that are actual ABI switches, and hence are needed to even compute the list of required target features.
We always explicitly (un)set all required and in-conflict features, just to avoid potential trouble caused by the default features of whatever the base CPU is. We do this *before* applying `-Ctarget-feature` to maintain backward compatibility; this poses a slight risk of missing some implicit feature dependencies in LLVM but has the advantage of not breaking users that deliberately toggle ABI-relevant target features. They get a warning but the feature does get toggled the way they requested.
For now, our logic supports x86, ARM, and RISC-V (just like the previous logic did). Unsurprisingly, RISC-V is the nicest. ;)
As a side-effect this also (unstably) allows *enabling* `x87` when that is harmless. I used the opportunity to mark SSE2 as required on x86-64, to better match the actual logic in LLVM and because all x86-64 chips do have SSE2. This infrastructure also prepares us for requiring SSE on x86-32 when we want to use that for our ABI (and for float semantics sanity), see https://github.com/rust-lang/rust/issues/133611, but no such change is happening in this PR.
r? `@workingjubilee`
Pass the arch rather than full target name to windows_registry::find_tool
The full target name can be anything with custom target specs. Passing just the arch wasn't possible before cc 1.2, but is now thanks to https://github.com/rust-lang/cc-rs/pull/1285.
try-job: i686-msvc
When `-Cstrip` was changed to use the bundled rust-objcopy instead of
/usr/bin/strip on OSX, strip-like arguments were preserved.
But strip and objcopy are, while being the same binary, different, they
have different defaults depending on which binary they are.
Notably, strip strips everything by default, and objcopy doesn't strip
anything by default.
Additionally, `-S` actually means `--strip-all`, so debuginfo stripped
everything and symbols didn't strip anything.
We now correctly pass `--strip-debug` and `--strip-all`.
stabilize const_swap
libs-api FCP passed in https://github.com/rust-lang/rust/issues/83163.
However, I only just realized that this actually involves an intrinsic. The intrinsic could be implemented entirely with existing stable const functionality, but we choose to make it a primitive to be able to detect more UB. So nominating for `@rust-lang/lang` to make sure they are aware; I leave it up to them whether they want to FCP this.
While at it I also renamed the intrinsic to make the "nonoverlapping" constraint more clear.
Fixes#83163
rustc_codegen_ssa: Buffer file writes in link_rlib
This makes this step take ~25ms on my machine (M3 Max 64GB) for Zed repo instead of ~150ms (on editor crate). Additionally it takes down the time needed for a clean cargo build of ripgrep from ~6.1s to 5.9s.
This change is mostly relevant for dev builds of crates with multiple large CGUs.
I imagine it could be quite relevant for dev scenarios on Windows, but sadly I have no way to measure that myself.
This makes this step take ~25ms on my machine (M3 Max 64GB) for Zed repo instead of ~150ms. Additionally it takes down the time needed for a clean cargo build of ripgrep from ~6.1s to 5.9s.
This change is mostly relevant for crates with multiple large CGUs.
Begin to implement type system layer of unsafe binders
Mostly TODOs, but there's a lot of match arms that are basically just noops so I wanted to split these out before I put up the MIR lowering/projection part of this logic.
r? oli-obk
Tracking:
- https://github.com/rust-lang/rust/issues/130516
Reduce the amount of explicit FatalError.raise()
Instead use dcx.abort_if_error() or guar.raise_fatal() instead. These guarantee that an error actually happened previously and thus we don't silently abort.
Instead use dcx.abort_if_error() or guar.raise_fatal() instead. These
guarantee that an error actually happened previously and thus we don't
silently abort.
Variants::Single: do not use invalid VariantIdx for uninhabited enums
~~Stacked on top of https://github.com/rust-lang/rust/pull/133681, only the last commit is new.~~
Currently, `Variants::Single` for an empty enum contains a `VariantIdx` of 0; looking that up in the enum variant list will ICE. That's quite confusing. So let's fix that by adding a new `Variants::Empty` case for types that have 0 variants.
try-job: i686-msvc
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
Hir attributes
This PR needs some explanation, it's somewhat large.
- This is step one as described in https://github.com/rust-lang/compiler-team/issues/796. I've added a new `hir::Attribute` which is a lowered version of `ast::Attribute`. Right now, this has few concrete effects, however every place that after this PR parses a `hir::Attribute` should later get a pre-parsed attribute as described in https://github.com/rust-lang/compiler-team/issues/796 and transitively https://github.com/rust-lang/rust/issues/131229.
- an extension trait `AttributeExt` is added, which is implemented for both `ast::Attribute` and `hir::Atribute`. This makes `hir::Attributes` mostly compatible with code that used to parse `ast::Attribute`. All its methods are also added as inherent methods to avoid having to import the trait everywhere in the compiler.
- Incremental can not not hash `ast::Attribute` at all.
reject aarch64 target feature toggling that would change the float ABI
~~Stacked on top of https://github.com/rust-lang/rust/pull/133099. Only the last two commits are new.~~
The first new commit lays the groundwork for separately controlling whether a feature may be enabled or disabled. The second commit uses that to make it illegal to *disable* the `neon` feature (which is only possible via `-Ctarget-feature`, and so the new check just adds a warning). Enabling the `neon` feature remains allowed on targets that don't disable `neon` or `fp-armv8`, which is all our built-in targets. This way, the entire PR is not a breaking change.
Fixes https://github.com/rust-lang/rust/issues/131058 for hardfloat targets (together with https://github.com/rust-lang/rust/pull/133102 which fixed it for softfloat targets).
Part of https://github.com/rust-lang/rust/issues/116344.
Modifies the index instruction from `gep [0 x %Type]` to `gep %Type`
Fixes#133979.
This PR modifies the index instruction from `gep [0 x %Type]` to `gep %Type`, which is the same with pointer offset calculation.
This will help LLVM calculate various formats of GEP instructions. According to [[RFC] Replacing getelementptr with ptradd](https://discourse.llvm.org/t/rfc-replacing-getelementptr-with-ptradd/68699), we ultimately aim to canonicalize everything to `gep i8`. Based on the results from https://github.com/rust-lang/rust/pull/134117#issuecomment-2531717076, I think we still need to investigate some missing optimizations, so this PR is just a small step forward.
r? compiler
Add some convenience helper methods on `hir::Safety`
Makes a lot of call sites simpler and should make any refactorings needed for https://github.com/rust-lang/rust/pull/134090#issuecomment-2541332415 simpler, as fewer sites have to be touched in case we end up storing some information in the variants of `hir::Safety`
don't show the full linker args unless `--verbose` is passed
the linker arguments can be *very* long, especially for crates with many dependencies. often they are not useful. omit them unless the user specifically requests them.
split out from https://github.com/rust-lang/rust/pull/119286. fixes https://github.com/rust-lang/rust/issues/109979.
r? `@bjorn3`
try-build: i686-mingw
the linker arguments can be *very* long, especially for crates with many dependencies. some parts of them are not very useful. unless specifically requested:
- omit object files specific to the current invocation
- fold rlib files into a single braced argument (in shell expansion format)
this shortens the output significantly without removing too much information.
A bunch of cleanups (part 2)
Just like https://github.com/rust-lang/rust/pull/133567 these were all found while looking at the respective code, but are not blocking any other changes I want to make in the short term.
forbid toggling x87 and fpregs on hard-float targets
Part of https://github.com/rust-lang/rust/issues/116344, follow-up to https://github.com/rust-lang/rust/pull/129884:
The `x87` target feature on x86 and the `fpregs` target feature on ARM must not be disabled on a hardfloat target, as that would change the float ABI. However, *enabling* `fpregs` on ARM is [explicitly requested](https://github.com/rust-lang/rust/issues/130988) as it seems to be useful. Therefore, we need to refine the distinction of "forbidden" target features and "allowed" target features: all (un)stable target features can determine on a per-target basis whether they should be allowed to be toggled or not. `fpregs` then checks whether the current target has the `soft-float` feature, and if yes, `fpregs` is permitted -- otherwise, it is not. (Same for `x87` on x86).
Also fixes https://github.com/rust-lang/rust/issues/132351. Since `fpregs` and `x87` can be enabled on some builds and disabled on others, it would make sense that one can query it via `cfg`. Therefore, I made them behave in `cfg` like any other unstable target feature.
The first commit prepares the infrastructure, but does not change behavior. The second commit then wires up `fpregs` and `x87` with that new infrastructure.
r? `@workingjubilee`
It is treated as a map already. This is using FxIndexMap rather than
UnordMap because the latter doesn't provide an api to pick a single
value iff all values are equal, which each_linked_rlib depends on.
Pass end position of span through inline ASM cookie
Before this PR, only the start position of the span was passed though the inline ASM cookie to diagnostics. LLVM 19 has full support for 64-bit inline ASM cookies; this PR uses that to pass the end position of the span in the upper 32 bits, meaning inline ASM diagnostics now point at the entire line the error occurred on, not just the first character of it.
