Fix help message for modification to &T created by &{t}
Previous:
```rust
error[E0594]: cannot assign to `*x` which is behind a `&` reference
--> src/main.rs:3:5
|
2 | let x: &usize = &mut{0};
| ------- help: consider changing this to be a mutable reference: `&mut mut{0}`
3 | *x = 1;
| ^^^^^^ `x` is a `&` reference, so the data it refers to cannot be written
```
- Accessing fields of a union require unsafe block
- As part of 2229 we don't allow precision where we need an unsafe block
to capture.
Fixes: #87378
r? @nikomatsakis
rename const checking visitor module to check_consts::check
This avoids naming ambiguities with "const validation" which is in `interpret/validity.rs` and checks *values*.
r? `@oli-obk`
MIR opt: separate constant predecessors of a switch
For each block S ending with a switch, this pass copies S for each of S's predecessors that seem to assign the value being switched over as a const. This is done using a somewhat simple heuristic to determine what seems to be a const transitively.
More precisely, this is what the pass does:
- find a block that ends in a switch
- track if there is an unique place set before the current basic block that determines the result of the switch (this is the part that resolves switching over discriminants)
- if there is, iterate over the parents that have a reasonable terminator and find if the found determining place is likely to be (transitively) set from a const within that parent block
- if so, add the corresponding edge to a vector of edges to duplicate
- once this is done, iterate over the found edges: copy the target block and replace the reference to the target block in the origin block with the new block
This pass is not optimal and could probably duplicate in more cases, but the intention was mostly to address cases like in #85133 or #85365, to avoid creating new enums that get destroyed immediately afterwards (notably making the new try v2 `?` desugar zero-cost).
A benefit of this pass working the way it does is that it is easy to ensure its correctness: the worst that can happen is for it to needlessly copy a basic block, which is likely to be destroyed by cleanup passes afterwards. The complex parts where aliasing matters are only heuristics and the hard work is left to further passes like ConstProp.
# LLVM blocker
Unfortunately, I believe it would be unwise to enable this optimization by default for now. Indeed, currently switch lowering passes like SimplifyCFG in LLVM lose the information on the set of possible variant values, which means it tends to actually generate worse code with this optimization enabled. A fix would have to be done in LLVM itself. This is something I also want to look into. I have opened [a bug report at the LLVM bug tracker](https://bugs.llvm.org/show_bug.cgi?id=50455).
When this is done, I hope we can enable this pass by default. It should be fairly fast and I think it is beneficial in many cases. Notably, it should be a sound alternative to simplify-arm-identity. By the way, ConstProp only seems to pick up the optimization in functions that are not generic. This is however most likely an issue in ConstProp that I will look into afterwards.
This is my first contribution to rustc, and I would like to thank everyone on the Zulip mir-opt chat for the help and support, and especially `@scottmcm` for the guidance.
Store all HIR owners in the same container
This replaces the previous storage in a BTreeMap for each of Item/ImplItem/TraitItem/ForeignItem.
This should allow for a more compact storage.
Based on https://github.com/rust-lang/rust/pull/83114
Display an extra note for trailing semicolon lint with trailing macro
Currently, we parse macros at the end of a block
(e.g. `fn foo() { my_macro!() }`) as expressions, rather than
statements. This means that a macro invoked in this position
cannot expand to items or semicolon-terminated expressions.
In the future, we might want to start parsing these kinds of macros
as statements. This would make expansion more 'token-based'
(i.e. macro expansion behaves (almost) as if you just textually
replaced the macro invocation with its output). However,
this is a breaking change (see PR #78991), so it will require
further discussion.
Since the current behavior will not be changing any time soon,
we need to address the interaction with the
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint. Since we are parsing
the result of macro expansion as an expression, we will emit a lint
if there's a trailing semicolon in the macro output. However, this
results in a somewhat confusing message for users, since it visually
looks like there should be no problem with having a semicolon
at the end of a block
(e.g. `fn foo() { my_macro!() }` => `fn foo() { produced_expr; }`)
To help reduce confusion, this commit adds a note explaining
that the macro is being interpreted as an expression. Additionally,
we suggest adding a semicolon after the macro *invocation* - this
will cause us to parse the macro call as a statement. We do *not*
use a structured suggestion for this, since the user may actually
want to remove the semicolon from the macro definition (allowing
the block to evaluate to the expression produced by the macro).
dont provide fwd declared params to cg defaults
Fixes#83938
```rust
#![feature(const_evaluatable_checked, const_generics, const_generics_defaults)]
#![allow(incomplete_features)]
pub struct Bar<const N: usize, const M: usize = { N + 1 }>;
pub fn foo<const N1: usize>() -> Bar<N1> { loop {} }
fn main() {}
```
This PR makes this code no longer ICE, it was ICE'ing previously because when building substs for `Bar<N1>` we would subst the anon ct: `ConstKind::Unevaluated({N + 1}, substs: [N, M])` with substs of `[N1]`. the anon const has forward declared params supplied though so we end up trying to substitute the provided `M` param which causes the ICE.
This PR doesn't handle the predicates of the const so
```rust
trait Foo<const N: usize> { const Assoc: usize; }
pub struct Bar<const N: usize = { <()>::Assoc }> where (): Foo<N>;
```
Resolves to `<() as Foo<N>>::Assoc` which can allow for using fwd declared params indirectly.
```rust
trait Foo<const N: usize> {}
struct Bar<const N: usize = { 2 + 3 }> where (): Foo<N>;
```
This code also ICEs under this PR because instantiating the default's predicates causes an ICE as predicates_of contains predicates with fwd declared params
PR was briefly discussed [in this zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/260443-project-const-generics/topic/evil.20preds.20in.20param.20env.20.2386580)
Add support for powerpc-unknown-freebsd
- A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
For all Rust targets on FreeBSD, it's rust@FreeBSD.org.
- Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
Done.
- Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
Done
- Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
Done.
- The target must not introduce license incompatibilities.
Done.
- Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Fine with me.
- The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
Done.
- If the target supports building host tools (such as rustc or cargo), those host tools must not depend on proprietary (non-FOSS) libraries, other than ordinary runtime libraries supplied by the platform and commonly used by other binaries built for the target. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
Done.
- Targets should not require proprietary (non-FOSS) components to link a functional binary or library.
Done.
- "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
Fine with me.
- Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
Ok.
- This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Ok.
- Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
std is implemented.
- The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running tests (even if they do not pass), the documentation must explain how to run tests for the target, using emulation if possible or dedicated hardware if necessary.
Hm, building is possible the same way as other Rust on FreeBSD targets.
- Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
Ok.
- Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
Ok.
- Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
Ok.
- In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
Ok.
Remove detection of rustup and cargo in 'missing extern crate' diagnostics
Previously, this would change the test output when RUSTUP_HOME was set:
```
---- [ui] ui/issues/issue-49851/compiler-builtins-error.rs stdout ----
diff of stderr:
1 error[E0463]: can't find crate for `core`
2 |
3 = note: the `thumbv7em-none-eabihf` target may not be installed
+ = help: consider downloading the target with `rustup target add thumbv7em-none-eabihf`
4
5 error: aborting due to previous error
6
```
Originally, I fixed it by explicitly unsetting RUSTUP_HOME in
compiletest. Then I realized that almost no one has RUSTUP_HOME set,
since rustup doesn't set it itself. It does set RUST_RECURSION_COUNT
whenever it launches a proxy, though - use that instead.
r? ```@estebank``` cc ```@petrochenkov``` ```@kinnison```
Fix span when suggesting to add an associated type bound
Fixes#87261
Note that this fix is not perfect, it ~~will still give incorrect~~ won't give suggestions in some situations:
- If the associated type is defined on a supertrait of those contained in the opaque type, it will fallback to the previous behaviour, e.g. if `AssocTy` is defined on the trait `Foo`, `Bar` has `Foo` as supertrait and the opaque type is a `impl Bar + Baz`.
- If the the associated type is defined on a generic trait and the opaque type includes two versions of that generic trait, e.g. the opaque type is `impl Foo<A> + Foo<B>`
Currently, we parse macros at the end of a block
(e.g. `fn foo() { my_macro!() }`) as expressions, rather than
statements. This means that a macro invoked in this position
cannot expand to items or semicolon-terminated expressions.
In the future, we might want to start parsing these kinds of macros
as statements. This would make expansion more 'token-based'
(i.e. macro expansion behaves (almost) as if you just textually
replaced the macro invocation with its output). However,
this is a breaking change (see PR #78991), so it will require
further discussion.
Since the current behavior will not be changing any time soon,
we need to address the interaction with the
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint. Since we are parsing
the result of macro expansion as an expression, we will emit a lint
if there's a trailing semicolon in the macro output. However, this
results in a somewhat confusing message for users, since it visually
looks like there should be no problem with having a semicolon
at the end of a block
(e.g. `fn foo() { my_macro!() }` => `fn foo() { produced_expr; }`)
To help reduce confusion, this commit adds a note explaining
that the macro is being interpreted as an expression. Additionally,
we suggest adding a semicolon after the macro *invocation* - this
will cause us to parse the macro call as a statement. We do *not*
use a structured suggestion for this, since the user may actually
want to remove the semicolon from the macro definition (allowing
the block to evaluate to the expression produced by the macro).
Warn on inert attributes used on bang macro invocation
These attributes are currently discarded.
This may change in the future (see #63221), but for now,
placing inert attributes on a macro invocation does nothing,
so we should warn users about it.
Technically, it's possible for there to be attribute macro
on the same macro invocation (or at a higher scope), which
inspects the inert attribute. For example:
```rust
#[look_for_inline_attr]
#[inline]
my_macro!()
#[look_for_nested_inline]
mod foo { #[inline] my_macro!() }
```
However, this would be a very strange thing to do.
Anyone running into this can manually suppress the warning.
Refactor vtable format for upcoming trait_upcasting feature.
This modifies vtable format:
1. reordering occurrence order of methods coming from different traits
2. include `VPtr`s for supertraits where this vtable cannot be directly reused during trait upcasting.
Also, during codegen, the vtables corresponding to these newly included `VPtr` will be requested and generated.
For the cases where this vtable can directly used, now the super trait vtable has exactly the same content to some prefix of this one.
r? `@bjorn3`
cc `@RalfJung`
cc `@rust-lang/wg-traits`
Simplify the collecting of `? Trait` bounds in where clause
This PR fixes the FIXME about using less rightward drift and only one error reporting when collecting of `?Trait` bounds in where clause.
Checking whether the path length of `bound_ty` is 1 can be replaced by whether `unresolved_segments` in the partial_res is 0.
Checking whether the `param.kind` is `Type{...}` can also be omitted. One Fx hash calculation will be done for Const or Lifetime param, but the impact on efficiency should be small IMO
Previously, this would change the test output when RUSTUP_HOME was set:
```
---- [ui] ui/issues/issue-49851/compiler-builtins-error.rs stdout ----
diff of stderr:
1 error[E0463]: can't find crate for `core`
2 |
3 = note: the `thumbv7em-none-eabihf` target may not be installed
+ = help: consider downloading the target with `rustup target add thumbv7em-none-eabihf`
4
5 error: aborting due to previous error
6
```
Originally, I fixed it by explicitly unsetting RUSTUP_HOME in
compiletest. Then I realized that almost no one has RUSTUP_HOME set,
since rustup doesn't set it itself; although it does set RUST_RECURSION_COUNT
whenever it launches a proxy. Then it was pointed out that this runtime
check doesn't really make sense and it's fine to make it unconditional.
fix: clarify suggestion that `&T` must refer to `T: Sync` for `&T: Send`
### Description
- [x] fix#86507
- [x] add UI test for relevant code from issue
- [x] change `rustc_trait_selection/src/traits/error_reporting/suggestions.rs` to include a more clear suggestion when `&T` fails to satisfy `Send` bounds due to the fact that `T` fails to implement `Sync`
- [x] update UI test in Clippy: `src/tools/tests/ui/future_not_send.stderr`
Make mir borrowck's use of opaque types independent of the typeck query's result
fixes#87218fixes#86465
we used to use the typeck results only to generate an obligation for the mir borrowck type to be equal to the typeck result.
When i removed the `fixup_opaque_types` function in #87200, I exposed a bug that showed that mir borrowck can't doesn't get enough information from typeck in order to build the correct lifetime mapping from opaque type usage to the actual concrete type. We therefor now fully compute the information within mir borrowck (we already did that, but we only used it to verify the typeck result) and stop using the typeck information.
We will likely be able to remove most opaque type information from the borrowck results in the future and just have all current callers use the mir borrowck result instead.
r? `@spastorino`
add test for issue 86507
add stderr for issue 86507
update issue-86507 UI test
add comment for the expected error in UI test file
add proper 'refers to <ref_type>' in suggestion
update diagnostic phrasing; update test to match new phrasing; re-organize logic for checking T: Sync
evaluate additional obligation to figure out if T is Sync
run './x.py test tidy --bless'
incorporate changes from review; reorganize logic for readability
Revert PR 81473 to resolve (on mainline) issues 81626 and 81658.
This is a nightly-targetted variant of PR #83171
The intent is to just address issue #81658 on all release channels, rather that keep repeatedly reverting PR #83171 on beta.
However, our intent is *also* to reland PR #83171 after we have addressed issue #81658 , most likely by coupling the re-landing of PR #83171 with an enhancement like PR #83004
Allow combining -Cprofile-generate and -Cpanic=unwind when targeting MSVC.
The LLVM limitation that previously prevented this has been fixed in LLVM 9 which is older than the oldest LLVM version we currently support.
Fixes https://github.com/rust-lang/rust/issues/61002.
r? ``@nagisa`` (or anyone else from ``@rust-lang/wg-llvm)``
Profile incremental compilation hashing fingerprints
Adds profiling instrumentation for the hashing of incremental compilation fingerprints per query.
This will eventually feed into the `measureme` and `rustc-perf` infrastructure for tracking if computing hashes changes over time.
TODOs:
* [x] Address the FIXME where we are including node interning in the hash timing.
* [ ] Update measureme/summarize to handle this new data: https://github.com/rust-lang/measureme/pull/166
* [ ] ~Update rustc-perf to handle the new data from measureme~ (will be done at a later time)
r? `@ghost`
cc `@michaelwoerister`
Support HIR wf checking for function signatures
During function type-checking, we normalize any associated types in
the function signature (argument types + return type), and then
create WF obligations for each of the normalized types. The HIR wf code
does not currently support this case, so any errors that we get have
imprecise spans.
This commit extends `ObligationCauseCode::WellFormed` to support
recording a function parameter, allowing us to get the corresponding
HIR type if an error occurs. Function typechecking is modified to
pass this information during signature normalization and WF checking.
The resulting code is fairly verbose, due to the fact that we can
no longer normalize the entire signature with a single function call.
As part of the refactoring, we now perform HIR-based WF checking
for several other 'typed items' (statics, consts, and inherent impls).
As a result, WF and projection errors in a function signature now
have a precise span, which points directly at the responsible type.
If a function signature is constructed via a macro, this will allow
the error message to point at the code 'most responsible' for the error
(e.g. a user-supplied macro argument).
Fix implicit Sized relaxation when attempting to relax other, unsupported trait
Fixes#87199.
Do note that this bug fix causes code like the `ref_arg::<[i32]>(&[5]);` line in the test case in combination with an affected function to no longer compile.
When pretty printing, name placeholders as bound regions
Split from #85499
When we see a placeholder that we are going to print, treat it as a bound var (and add it to a `for<...>`
Previously, we would 'forget' that we had `'static` regions in some
place during trait evaluation. This lead to us producing
`EvaluatedToOkModuloRegions` when we could have produced
`EvaluatedToOk`, causing us to perform unnecessary work.
This PR preserves `'static` regions when we canonicalize a predicate for
`evaluate_obligation`, and when we 'freshen' a predicate during trait
evaluation. Thie ensures that evaluating a predicate containing
`'static` regions can produce `EvaluatedToOk` (assuming that we
don't end up introducing any region dependencies during evaluation).
Building off of this improved caching, we use
`predicate_must_hold_considering_regions` during fulfillment of
projection predicates to see if we can skip performing additional work.
We already do this for trait predicates, but doing this for projection
predicates lead to mixed performance results without the above caching
improvements.
Rename force-warns to force-warn
The renames the `--force-warns` option to `--force-warn`. This mirrors other lint options like `--warn` and `--deny` which are in the singular.
r? `@nikomatsakis`
cc `@ehuss` - this option is being used by Cargo. How do we make sure the transition to using the new name is as smooth as possible?
Get back the more precise suggestion spans of old regionck
I noticed that when you turn on nll, the structured suggestion replaces a snippet instead of appending a snippet. It seems clearer to the user to only highlight the newly added characters instead of the entire `impl Trait` (and old regionck already does it this way).
r? ``@estebank``
avoid temporary vectors/reuse iterators
Avoid collecting an interator just to re-iterate immediately.
Rather reuse the previous iterator. (clippy::needless_collect)
During function type-checking, we normalize any associated types in
the function signature (argument types + return type), and then
create WF obligations for each of the normalized types. The HIR wf code
does not currently support this case, so any errors that we get have
imprecise spans.
This commit extends `ObligationCauseCode::WellFormed` to support
recording a function parameter, allowing us to get the corresponding
HIR type if an error occurs. Function typechecking is modified to
pass this information during signature normalization and WF checking.
The resulting code is fairly verbose, due to the fact that we can
no longer normalize the entire signature with a single function call.
As part of the refactoring, we now perform HIR-based WF checking
for several other 'typed items' (statics, consts, and inherent impls).
As a result, WF and projection errors in a function signature now
have a precise span, which points directly at the responsible type.
If a function signature is constructed via a macro, this will allow
the error message to point at the code 'most responsible' for the error
(e.g. a user-supplied macro argument).
Better diagnostics with mismatched types due to implicit static lifetime
Fixes#78113
I think this is my first diagnostics PR...definitely happy to hear thoughts on the direction/implementation here.
I was originally just trying to solve the error above, where the lifetime on a GAT was causing a cryptic "mismatched types" error. But as I was writing this, I realized that this (unintentionally) also applied to a different case: `wf-in-foreign-fn-decls-issue-80468.rs`. I'm not sure if this diagnostic should get a new error code, or even reuse an existing one. And, there might be some ways to make this even more generalized. Also, the error is a bit more lengthy and verbose than probably needed. So thoughts there are welcome too.
This PR essentially ended up adding a new nice region error pass that triggers if a type doesn't match the self type of an impl which is selected because of a predicate because of an implicit static bound on that self type.
r? `@estebank`
MSVC.
The LLVM limitation that previously prevented this has been fixed in LLVM
9 which is older than the oldest LLVM version we currently support.
See https://github.com/rust-lang/rust/issues/61002.
Remove special case for `ExprKind::Paren` in `MutVisitor`
The special case breaks several useful invariants (`ExpnId`s are
globally unique, and never change). This special case
was added back in 2016 in https://github.com/rust-lang/rust/pull/34355
r? `@petrochenkov`
These attributes are currently discarded.
This may change in the future (see #63221), but for now,
placing inert attributes on a macro invocation does nothing,
so we should warn users about it.
Technically, it's possible for there to be attribute macro
on the same macro invocation (or at a higher scope), which
inspects the inert attribute. For example:
```rust
#[look_for_inline_attr]
#[inline]
my_macro!()
#[look_for_nested_inline]
mod foo { #[inline] my_macro!() }
```
However, this would be a very strange thing to do.
Anyone running into this can manually suppress the warning.
The special case breaks several useful invariants (`ExpnId`s are
globally unique, and never change). This special case
was added back in 2016 in https://github.com/rust-lang/rust/pull/34355
[debuginfo] Emit associated type bindings in trait object type names.
This PR updates debuginfo type name generation for trait objects to include associated type bindings and auto trait bounds -- so that, for example, the debuginfo type name of `&dyn Iterator<Item=Foo>` and `&dyn Iterator<Item=Bar>` don't both map to just `&dyn Iterator` anymore.
The following table shows examples of debuginfo type names before and after the PR:
| type | before | after |
|------|---------|-------|
| `&dyn Iterator<Item=u32>>` | `&dyn Iterator` | `&dyn Iterator<Item=u32>` |
| `&(dyn Iterator<Item=u32>> + Sync)` | `&dyn Iterator` | `&(dyn Iterator<Item=u32> + Sync)` |
| `&(dyn SomeTrait<bool, i8, Bar=u32>> + Send)` | `&dyn SomeTrait<bool, i8>` | `&(dyn SomeTrait<bool, i8, Bar=u32>> + Send)` |
For targets that need C++-like type names, we use `assoc$<Item,u32>` instead of `Item=u32`:
| type | before | after |
|------|---------|-------|
| `&dyn Iterator<Item=u32>>` | `ref$<dyn$<Iterator> >` | `ref$<dyn$<Iterator<assoc$<Item,u32> > > >` |
| `&(dyn Iterator<Item=u32>> + Sync)` | `ref$<dyn$<Iterator> >` | `ref$<dyn$<Iterator<assoc$<Item,u32> >,Sync> >` |
| `&(dyn SomeTrait<bool, i8, Bar=u32>> + Send)` | `ref$<dyn$<SomeTrait<bool, i8> > >` | `ref$<dyn$<SomeTrait<bool,i8,assoc$<Bar,u32> > >,Send> >` |
The PR also adds self-profiling measurements for debuginfo type name generation (re. https://github.com/rust-lang/rust/issues/86431). It looks like the compiler spends up to 0.5% of its time in that task, so the potential for optimizing it via caching seems limited.
However, the perf run also shows [the biggest regression](https://perf.rust-lang.org/detailed-query.html?commit=585e91c718b0b2c5319e1fffd0ff1e62aaf7ccc2&base_commit=b9197978a90be6f7570741eabe2da175fec75375&benchmark=tokio-webpush-simple-debug&run_name=incr-unchanged) in a test case that does not even invoke the code in question. This suggests that the length of the names we generate here can affect performance by influencing how much data the linker has to copy around.
Fixes https://github.com/rust-lang/rust/issues/86134.
Various diagnostics clean ups/tweaks
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
Make `--force-warns` a normal lint level option
Now that `ForceWarn` is a lint level, there's no reason `--force-warns` should be treated differently from other options that set lint levels. This merges the `ForceWarn` handling in with the other lint level command line options. It also unifies all of the relevant selection logic in `compiler/rustc_lint/src/levels.rs`, rather than having some of it weirdly elsewhere.
Fixes#86958, which arose from the special-cased handling of `ForceWarn` having had an error in it.
Don't create references to uninitialized data in `List::from_arena`
Previously `result` and `arena_slice` were references pointing to uninitialized data, which is technically UB. They may have been fine because the pointed data is `Copy` and and they were only written to, but the semantics of this aren't clearly defined yet, and since we have a sound way to do the same thing I don't think we should keep the possibly-unsound way.
Compute a better `lint_node_id` during expansion
When we need to emit a lint at a macro invocation, we currently use the
`NodeId` of its parent definition (e.g. the enclosing function). This
means that any `#[allow]` / `#[deny]` attributes placed 'closer' to the
macro (e.g. on an enclosing block or statement) will have no effect.
This commit computes a better `lint_node_id` in `InvocationCollector`.
When we visit/flat_map an AST node, we assign it a `NodeId` (earlier
than we normally would), and store than `NodeId` in current
`ExpansionData`. When we collect a macro invocation, the current
`lint_node_id` gets cloned along with our `ExpansionData`, allowing it
to be used if we need to emit a lint later on.
This improves the handling of `#[allow]` / `#[deny]` for
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` and some `asm!`-related lints.
The 'legacy derive helpers' lint retains its current behavior
(I've inlined the now-removed `lint_node_id` function), since
there isn't an `ExpansionData` readily available.
feat(rustc_lint): add `dyn_drop`
Based on the conversation in #86747.
Explanation
-----------
A trait object bound of the form `dyn Drop` is most likely misleading and not what the programmer intended.
`Drop` bounds do not actually indicate whether a type can be trivially dropped or not, because a composite type containing `Drop` types does not necessarily implement `Drop` itself. Naïvely, one might be tempted to write a deferred drop system, to pull cleaning up memory out of a latency-sensitive code path, using `dyn Drop` trait objects. However, this breaks down e.g. when `T` is `String`, which does not implement `Drop`, but should probably be accepted.
To write a trait object bound that accepts anything, use a placeholder trait with a blanket implementation.
```rust
trait Placeholder {}
impl<T> Placeholder for T {}
fn foo(_x: Box<dyn Placeholder>) {}
```
Don't use gc-sections with profile-generate.
When building with profile-generate don't call gc_sections as this can
can sometimes strip out profile data. This missing information in the
prof files can then result in missing functions when using the profile
information.
#78226
r? `@Mark-Simulacrum`
Use existing declaration of rust_eh_personality
If crate declares `rust_eh_personality`, re-use existing declaration
as otherwise attempts to set function attributes that follow the
declaration will fail (unless it happens to have exactly the same
type signature as the one predefined in the compiler).
Fixes#70117.
Fixes https://github.com/rust-lang/rust/pull/81469#issuecomment-809428126; probably.
Based on the conversation in #86747.
Explanation
-----------
A trait object bound of the form `dyn Drop` is most likely misleading
and not what the programmer intended.
`Drop` bounds do not actually indicate whether a type can be trivially
dropped or not, because a composite type containing `Drop` types does
not necessarily implement `Drop` itself. Naïvely, one might be tempted
to write a deferred drop system, to pull cleaning up memory out of a
latency-sensitive code path, using `dyn Drop` trait objects. However,
this breaks down e.g. when `T` is `String`, which does not implement
`Drop`, but should probably be accepted.
To write a trait object bound that accepts anything, use a placeholder
trait with a blanket implementation.
```rust
trait Placeholder {}
impl<T> Placeholder for T {}
fn foo(_x: Box<dyn Placeholder>) {}
```
