Add method to convert internal to stable constructs
This is an alternative implementation to https://github.com/rust-lang/rust/pull/116999. I believe we can still improve the logic a bit here, but I wanted to see which direction we should go first.
In this implementation, the API is simpler and we keep Tables somewhat private. The definition is still public though, since we have to expose the Stable trait. However, there's a cost of keeping another thread-local and using `Rc`, but I'm hoping it will be a small cost.
r? ``@oli-obk``
r? ``@spastorino``
Suggest unwrap/expect for let binding type mismatch
Found it when investigating https://github.com/rust-lang/rust/issues/116738
I'm not sure whether it's a good style to suggest `unwrap`, seems it's may helpful for newcomers.
#116738 needs another fix to improve it.
Introduce `-C instrument-coverage=branch` to gate branch coverage
This was extracted from https://github.com/rust-lang/rust/pull/115061 and can land independently from other coverage related work.
The flag is unused for now, but is added in advance of adding branch coverage support.
It is an unstable, nightly only flag that needs to be used in combination with `-Zunstable-options`, like so: `-Zunstable-options -C instrument-coverage=branch`.
The goal is to develop branch coverage as an unstable opt-in feature first, before it matures and can be turned on by default.
Validate `feature` and `since` values inside `#[stable(…)]`
Previously the string passed to `#[unstable(feature = "...")]` would be validated as an identifier, but not `#[stable(feature = "...")]`. In the standard library there were `stable` attributes containing the empty string, and kebab-case string, neither of which should be allowed.
Pre-existing validation of `unstable`:
```rust
// src/lib.rs
#![allow(internal_features)]
#![feature(staged_api)]
#![unstable(feature = "kebab-case", issue = "none")]
#[unstable(feature = "kebab-case", issue = "none")]
pub struct Struct;
```
```console
error[E0546]: 'feature' is not an identifier
--> src/lib.rs:5:1
|
5 | #![unstable(feature = "kebab-case", issue = "none")]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
```
For an `unstable` attribute, the need for an identifier is obvious because the downstream code needs to write a `#![feature(...)]` attribute containing that identifier. `#![feature(kebab-case)]` is not valid syntax and `#![feature(kebab_case)]` would not work if that is not the name of the feature.
Having a valid identifier even in `stable` is less essential but still useful because it allows for informative diagnostic about the stabilization of a feature. Compare:
```rust
// src/lib.rs
#![allow(internal_features)]
#![feature(staged_api)]
#![stable(feature = "kebab-case", since = "1.0.0")]
#[stable(feature = "kebab-case", since = "1.0.0")]
pub struct Struct;
```
```rust
// src/main.rs
#![feature(kebab_case)]
use repro::Struct;
fn main() {}
```
```console
error[E0635]: unknown feature `kebab_case`
--> src/main.rs:3:12
|
3 | #![feature(kebab_case)]
| ^^^^^^^^^^
```
vs the situation if we correctly use `feature = "snake_case"` and `#![feature(snake_case)]`, as enforced by this PR:
```console
warning: the feature `snake_case` has been stable since 1.0.0 and no longer requires an attribute to enable
--> src/main.rs:3:12
|
3 | #![feature(snake_case)]
| ^^^^^^^^^^
|
= note: `#[warn(stable_features)]` on by default
```
Handle `ReErased` in responses in new solver
There are legitimate cases in the compiler where we return `ReErased` for lifetimes that are uncaptured in the hidden type of an opaque. For example, in the test committed below, we ignore ignore the bivariant lifetimes of an opaque when it's inferred as the hidden type of another opaque. This may result in a `type_of(Opaque)` call returning a type that references `ReErased`. Let's handle this gracefully in the new solver.
Also added a `rustc_hidden_type_of_opaques` attr to print hidden types. This seems useful for opaques.
r? lcnr
Separate move path tracking between borrowck and drop elaboration.
The primary goal of this PR is to skip creating a `MovePathIndex` for path that do not need dropping in drop elaboration.
The 2 first commits are cleanups.
The next 2 commits displace `move` errors from move-path builder to borrowck. Move-path builder keeps the same logic, but does not carry error information any more.
The remaining commits allow to filter `MovePathIndex` creation according to types. This is used in drop elaboration, to avoid computing dataflow for paths that do not need dropping.
Rollup of 6 pull requests
Successful merges:
- #107159 (rand use getrandom for freebsd (available since 12.x))
- #116859 (Make `ty::print::Printer` take `&mut self` instead of `self`)
- #117046 (return unfixed len if pat has reported error)
- #117070 (rustdoc: wrap Type with Box instead of Generics)
- #117074 (Remove smir from triage and add me to stablemir)
- #117086 (Update .mailmap to promote my livename)
r? `@ghost`
`@rustbot` modify labels: rollup
return unfixed len if pat has reported error
- Fixes#116186
- Fixes#113021
This issue arises due to the creation of a fixed-length pattern, as a result of the mir body corruption. The corruption taints `tcx.eval_to_allocation_raw`, causing it to return `AlreadyReported`. Consequently, this prevents `len.try_eval_target_usize` from evaluating correctly and returns `None`. Lastly, it results in the return of `[usize; min_len]`.
To rectify this issue, my approach is that to return unfixed when encountering `ErrorHandled::Reported`. Additionally, in instances of `ErrorHandled::TooGeneric`, the previous logic has been reinstated.
report `unused_import` for empty reexports even it is pub
Fixes#116032
An easy fix. r? `@petrochenkov`
(Discovered this issue while reviewing #115993.)
Implement jump threading MIR opt
This pass is an attempt to generalize `ConstGoto` and `SeparateConstSwitch` passes into a more complete jump threading pass.
This pass is rather heavy, as it performs a truncated backwards DFS on MIR starting from each `SwitchInt` terminator. This backwards DFS remains very limited, as it only walks through `Goto` terminators.
It is build to support constants and discriminants, and a propagating through a very limited set of operations.
The pass successfully manages to disentangle the `Some(x?)` use case and the DFA use case. It still needs a few tests before being ready.
coverage: Add UI tests for values accepted by `-Cinstrument-coverage`
I wanted to clean up the code in `parse_instrument_coverage`, but it occurred to me that we currently don't have any UI tests for the various stable and unstable values supported by this flag.
---
Normally it might be overkill to individually test all the different variants of `on`/`off`, but in this case the parsing of those values is mixed in with some other custom code, so I think it's worthwhile being thorough.
Location-insensitive polonius: consider a loan escaping if an SCC has member constraints applied only
The location-insensitive analysis considered loans to escape if there were member constraints, which makes *some* sense for scopes and matches the scopes that NLL computes on all the tests.
However, polonius and NLLs differ on the fuzzed case #116657, where an SCC has member constraints but no applied ones (and is kinda surprising). The existing UI tests with member constraints impacting scopes all have some constraint applied.
This PR changes the location-insensitive analysis to consider a loan to escape if there are applied member constraints, and for extra paranoia/insurance via fuzzing and crater: actually checks the constraint's min choice is indeed a universal region as we expect. (This could be turned into a `debug_assert` and early return as a slight optimization after these periods of verification)
The 4 UI tests where member constraints are meaningful for computing scopes still pass obviously, and this also fixes#116657.
r? `@matthewjasper`
Avoid having `rustc_smir` depend on `rustc_interface` or `rustc_driver`
This is done by moving all the logic into a macro that performs the entire "run" operation in one go.
This makes https://github.com/rust-lang/rust/pull/116806 obsolete
as a follow up we should make the macro usable without manually having to write
```rust
#[macro_use]
extern crate rustc_smir;
extern crate stable_mir;
extern crate rustc_driver;
extern crate rustc_interface;
use rustc_smir::rustc_internal;
```
in every crate that uses the macro.
r? `@spastorino`
Avoid a `track_errors` by bubbling up most errors from `check_well_formed`
I believe `track_errors` is mostly papering over issues that a sufficiently convoluted query graph can hit. I made this change, while the actual change I want to do is to stop bailing out early on errors, and instead use this new `ErrorGuaranteed` to invoke `check_well_formed` for individual items before doing all the `typeck` logic on them.
This works towards resolving https://github.com/rust-lang/rust/issues/97477 and various other ICEs, as well as allowing us to use parallel rustc more (which is currently rather limited/bottlenecked due to the very sequential nature in which we do `rustc_hir_analysis::check_crate`)
cc `@SparrowLii` `@Zoxc` for the new `try_par_for_each_in` function
coverage: Emit the filenames section before encoding per-function mappings
When embedding coverage information in LLVM IR (and ultimately in the resulting binary), there are two main things that each CGU needs to emit:
- A single `__llvm_covmap` record containing a coverage header, which mostly consists of a list of filenames used by the CGU's coverage mappings.
- Several `__llvm_covfun` records, one for each instrumented function, each of which contains the hash of the list of filenames in the header.
There is a kind of loose cyclic dependency between the two: we need the hash of the file table before we can emit the covfun records, but we need to traverse all of the instrumented functions in order to build the file table.
The existing code works by processing the individual functions first. It lazily adds filenames to the file table, and stores the mostly-complete function records in a temporary list. After this it hashes the file table, emits the header (containing the file table), and then uses the hash to emit all of the function records.
This PR reverses that order: first we traverse all of the functions (without trying to prepare their function records) to build a *complete* file table, and then emit it immediately. At this point we have the file table hash, so we can then proceed to build and emit all of the function records, without needing to store them in an intermediate list.
---
Along the way, this PR makes some necessary changes that are also worthwhile in their own right:
- We split `FunctionCoverage` into distinct collector/finished phases, which neatly avoids some borrow-checker hassles when extracting a function's final expression/mapping data.
- We avoid having to re-sort a function's mappings when preparing the list of filenames that it uses.
Most coverage metadata is encoded into two sections in the final executable.
The `__llvm_covmap` section mostly just contains a list of filenames, while the
`__llvm_covfun` section contains encoded coverage maps for each instrumented
function.
The catch is that each per-function record also needs to contain a hash of the
filenames list that it refers to. Historically this was handled by assembling
most of the per-function data into a temporary list, then assembling the
filenames buffer, then using the filenames hash to emit the per-function data,
and then finally emitting the filenames table itself.
However, now that we build the filenames table up-front (via a separate
traversal of the per-function data), we can hash and emit that part first, and
then emit each of the per-function records immediately after building. This
removes the awkwardness of having to temporarily store nearly-complete
per-function records.
Fix x86_64-gnu-llvm-15 CI tests
The CI script was broken - if there was a test failure in the first command chain (inside the `if`), CI would not report the failure.
It happened because there were two command chains separated by `&&` in the script, and since `set -e` doesn't exit for chained commands, if the first chain has failed, the script would happily continue forward, ignoring any test failures.
This could be fixed e.g. by adding some `|| exit 1` to the first chain, but I suppose that the `&&` chaining is unnecessary here anyway.
Reported [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/242791-t-infra/topic/test.20failure.20didn't.20stop.20CI).
Fixes: https://github.com/rust-lang/rust/issues/116867
Mention the syntax for `use` on `mod foo;` if `foo` doesn't exist
Newcomers might get confused that `mod` is the only way of defining scopes, and that it can be used as if it were `use`.
Fix#69492.
