use old ctx if has same expand environment during decode span
Fixes#112680
The root reason why #112680 failed with incremental compilation on the second attempt is the difference in `opaque` between the span of the field [`ident`](https://github.com/rust-lang/rust/blob/master/compiler/rustc_hir_typeck/src/expr.rs#L2348) and the span in the incremental cache at `tcx.def_ident_span(field.did)`.
- Let's call the span of `ident` as `span_a`, which is generated by [`apply_mark_internal`](https://github.com/rust-lang/rust/blob/master/compiler/rustc_span/src/hygiene.rs#L553-L554). Its content is similar to:
```rs
span_a_ctx -> SyntaxContextData {
opaque: span_a_ctx,
opaque_and_semitransparent: span_a_ctx,
// ....
}
```
- And call the span of `tcx.def_ident_span` as `span_b`, which is generated by [`decode_syntax_context`](https://github.com/rust-lang/rust/blob/master/compiler/rustc_span/src/hygiene.rs#L1390). Its content is:
```rs
span_b_ctx -> SyntaxContextData {
opaque: span_b_ctx,
// note `span_b_ctx` is not same as `span_a_ctx`
opaque_and_semitransparent: span_b_ctx,
// ....
}
```
Although they have the same `parent` (both refer to the root) and `outer_expn`, I cannot find the specific connection between them. Therefore, I chose a solution that may not be the best: give up the incremental compile cache to ensure we can use `span_a` in this case.
r? `@petrochenkov` Do you have any advice on this? Or perhaps this solution is acceptable?
Add `select_unpredictable` to force LLVM to use CMOV
Since https://reviews.llvm.org/D118118, LLVM will no longer turn CMOVs into branches if it comes from a `select` marked with an `unpredictable` metadata attribute.
This PR introduces `core::intrinsics::select_unpredictable` which emits such a `select` and uses it in the implementation of `binary_search_by`.
Since https://reviews.llvm.org/D118118, LLVM will no longer turn CMOVs
into branches if it comes from a `select` marked with an `unpredictable`
metadata attribute.
This PR introduces `core::intrinsics::select_unpredictable` which emits
such a `select` and uses it in the implementation of `binary_search_by`.
Support ?Trait bounds in supertraits and dyn Trait under a feature gate
This patch allows `maybe` polarity bounds under a feature gate. The only language change here is that corresponding hard errors are replaced by feature gates. Example:
```rust
#![feature(allow_maybe_polarity)]
...
trait Trait1 : ?Trait { ... } // ok
fn foo(_: Box<(dyn Trait2 + ?Trait)>) {} // ok
fn bar<T: ?Sized + ?Trait>(_: &T) {} // ok
```
Maybe bounds still don't do anything (except for `Sized` trait), however this patch will allow us to [experiment with default auto traits](https://github.com/rust-lang/rust/pull/120706#issuecomment-1934006762).
This is a part of the [MCP: Low level components for async drop](https://github.com/rust-lang/compiler-team/issues/727)
Make Clone::clone a lang item
I want to absorb all the logic for picking whether an Instance is LocalCopy or GloballyShared into one place. As part of this, I wanted to identify Clone shims inside `cross_crate_inlinable` and found that rather tricky. `@compiler-errors` suggested that I add a lang item for `Clone::clone` because that would produce other cleanups in the compiler.
That sounds good to me, but I have looked and I've only been able to find one.
r? compiler-errors
Switch from `derivative` to `derive-where`
This is a part of the effort to get rid of `syn 1.*` in compiler's dependencies: #109302
Derivative has not been maintained in nearly 3 years[^1]. It also depends on `syn 1.*`.
This PR replaces `derivative` with `derive-where`[^2], a not dead alternative, which uses `syn 2.*`.
A couple of `Debug` formats have changed around the skipped fields[^3], but I doubt this is an issue.
[^1]: https://github.com/mcarton/rust-derivative/issues/117
[^2]: https://lib.rs/crates/derive-where
[^3]: See the changes in `tests/ui`
Replace ASCII control chars with Unicode Control Pictures
Replace ASCII control chars like `CR` with Unicode Control Pictures like `␍`:
```
error: bare CR not allowed in doc-comment
--> $DIR/lex-bare-cr-string-literal-doc-comment.rs:3:32
|
LL | /// doc comment with bare CR: '␍'
| ^
```
Centralize the checking of unicode char width for the purposes of CLI display in one place. Account for the new replacements. Remove unneeded tracking of "zero-width" unicode chars, as we calculate these in the `SourceMap` as needed now.
rustc_target: add known safe s390x target features
This pull request adds known safe target features for s390x (aka IBM Z systems).
Currently, these features are unstable since stabilizing the target features requires submitting proposals.
The `vector` feature was added in IBM Z13 (`arch11`), and this is a SIMD feature for the newer IBM Z systems.
The `backchain` attribute is the IBM Z way of adding frame pointers like unwinding capabilities (the "frame-pointer" switch on IBM Z and IBM POWER platforms will add _emulated_ frame pointers to the binary, which profilers can't use for unwinding the stack).
Both attributes can be applied at the LLVM module or function levels. However, the `backchain` attribute has to be enabled for all the functions in the call stack to get a successful unwind process.
Forbid borrows and unsized types from being used as the type of a const generic under `adt_const_params`
Fixes#112219Fixes#112124Fixes#112125
### Motivation
Currently the `adt_const_params` feature allows writing `Foo<const N: [u8]>` this is entirely useless as it is not possible to write an expression which evaluates to a type that is not `Sized`. In order to actually use unsized types in const generics they are typically written as `const N: &[u8]` which *is* possible to provide a value of.
Unfortunately allowing the types of const parameters to contain references is non trivial (#120961) as it introduces a number of difficult questions about how equality of references in the type system should behave. References in the types of const generics is largely only useful for using unsized types in const generics.
This PR introduces a new feature gate `unsized_const_parameters` and moves support for `const N: [u8]` and `const N: &...` from `adt_const_params` into it. The goal here hopefully is to experiment with allowing `const N: [u8]` to work without references and then eventually completely forbid references in const generics.
Splitting this out into a new feature gate means that stabilization of `adt_const_params` does not have to resolve#120961 which is the only remaining "big" blocker for the feature. Remaining issues after this are a few ICEs and naming bikeshed for `ConstParamTy`.
### Implementation
The implementation is slightly subtle here as we would like to ensure that a stabilization of `adt_const_params` is forwards compatible with any outcome of `unsized_const_parameters`. This is inherently tricky as we do not support unstable trait implementations and we determine whether a type is valid as the type of a const parameter via a trait bound.
There are a few constraints here:
- We would like to *allow for the possibility* of adding a `Sized` supertrait to `ConstParamTy` in the event that we wind up opting to not support unsized types and instead requiring people to write the 'sized version', e.g. `const N: [u8; M]` instead of `const N: [u8]`.
- Crates should be able to enable `unsized_const_parameters` and write trait implementations of `ConstParamTy` for `!Sized` types without downstream crates that only enable `adt_const_params` being able to observe this (required for std to be able to `impl<T> ConstParamTy for [T]`
Ultimately the way this is accomplished is via having two traits (sad), `ConstParamTy` and `UnsizedConstParamTy`. Depending on whether `unsized_const_parameters` is enabled or not we change which trait is used to check whether a type is allowed to be a const parameter.
Long term (when stabilizing `UnsizedConstParamTy`) it should be possible to completely merge these traits (and derive macros), only having a single `trait ConstParamTy` and `macro ConstParamTy`.
Under `adt_const_params` it is now illegal to directly refer to `ConstParamTy` it is only used as an internal impl detail by `derive(ConstParamTy)` and checking const parameters are well formed. This is necessary in order to ensure forwards compatibility with all possible future directions for `feature(unsized_const_parameters)`.
Generally the intuition here should be that `ConstParamTy` is the stable trait that everything uses, and `UnsizedConstParamTy` is that plus unstable implementations (well, I suppose `ConstParamTy` isn't stable yet :P).
We already point these out quite aggressively, telling people not to use them, but would normally be rendered as nothing. Having them visible will make it easier for people to actually deal with them.
```
error: unicode codepoint changing visible direction of text present in literal
--> $DIR/unicode-control-codepoints.rs:26:22
|
LL | println!("{:?}", '�');
| ^-^
| ||
| |'\u{202e}'
| this literal contains an invisible unicode text flow control codepoint
|
= note: these kind of unicode codepoints change the way text flows on applications that support them, but can cause confusion because they change the order of characters on the screen
= help: if their presence wasn't intentional, you can remove them
help: if you want to keep them but make them visible in your source code, you can escape them
|
LL | println!("{:?}", '\u{202e}');
| ~~~~~~~~
```
vs the previous
```
error: unicode codepoint changing visible direction of text present in literal
--> $DIR/unicode-control-codepoints.rs:26:22
|
LL | println!("{:?}", '');
| ^-
| ||
| |'\u{202e}'
| this literal contains an invisible unicode text flow control codepoint
|
= note: these kind of unicode codepoints change the way text flows on applications that support them, but can cause confusion because they change the order of characters on the screen
= help: if their presence wasn't intentional, you can remove them
help: if you want to keep them but make them visible in your source code, you can escape them
|
LL | println!("{:?}", '\u{202e}');
| ~~~~~~~~
```
No longer track "zero-width" chars in `SourceMap`, read directly from the line when calculating the `display_col` of a `BytePos`. Move `char_width` to `rustc_span` and use it from the emitter.
This change allows the following to properly align in terminals (depending on the font, the replaced control codepoints are rendered as 1 or 2 width, on my terminal they are rendered as 1, on VSCode text they are rendered as 2):
```
error: this file contains an unclosed delimiter
--> $DIR/issue-68629.rs:5:17
|
LL | ␜␟ts␀![{i
| -- unclosed delimiter
| |
| unclosed delimiter
LL | ␀␀ fn rݻoa>rݻm
| ^
```
Match ergonomics 2024: Implement TC's match ergonomics proposal
Under gate `ref_pat_eat_one_layer_2024_structural`. Enabling `ref_pat_eat_one_layer_2024` at the same time allows the union of what the individual gates allow. `@traviscross`
r? `@Nadrieril`
cc https://github.com/rust-lang/rust/issues/123076
`@rustbot` label A-edition-2024 A-patterns
patchable-function-entry: Add unstable compiler flag and attribute
Tracking issue: #123115
Add the -Z patchable-function-entry compiler flag and the #[patchable_function_entry(prefix_nops = m, entry_nops = n)] attribute.
Rebased and adjusted the canditate implementation to match changes in the RFC.
Under gate `ref_pat_eat_one_layer_2024_structural`.
Enabling `ref_pat_eat_one_layer_2024` at the same time allows the union
of what the individual gates allow.
SmartPointer derive-macro
<!--
If this PR is related to an unstable feature or an otherwise tracked effort,
please link to the relevant tracking issue here. If you don't know of a related
tracking issue or there are none, feel free to ignore this.
This PR will get automatically assigned to a reviewer. In case you would like
a specific user to review your work, you can assign it to them by using
r? <reviewer name>
-->
Possibly replacing #123472 for continued upkeep of the proposal rust-lang/rfcs#3621 and implementation of the tracking issue #123430.
cc `@Darksonn` `@wedsonaf`
Added an associated `const THIS_IMPLEMENTATION_HAS_BEEN_TRIPLE_CHECKED`
to the `StableOrd` trait to ensure that implementors carefully consider
whether the trait's contract is upheld, as incorrect implementations can
cause miscompilations.
Add `f16` inline ASM support for RISC-V
This PR adds `f16` inline ASM support for RISC-V. A `FIXME` is left for `f128` support as LLVM does not support the required `Q` (Quad-Precision Floating-Point) extension yet.
Relevant issue: #125398
Tracking issue: #116909
`@rustbot` label +F-f16_and_f128
Stop sorting `Span`s' `SyntaxContext`, as that is incompatible with incremental
work towards https://github.com/rust-lang/rust/issues/90317
Luckily no one actually needed these to be sorted, so it didn't even affect diagnostics. I'm guessing they'd have been sorted by creation time anyway, so it wouldn't really have mattered.
r? `@cjgillot`
