mark some target features as 'forbidden' so they cannot be (un)set with -Ctarget-feature
The context for this is https://github.com/rust-lang/rust/issues/116344: some target features change the way floats are passed between functions. Changing those target features is unsound as code compiled for the same target may now use different ABIs.
So this introduces a new concept of "forbidden" target features (on top of the existing "stable " and "unstable" categories), and makes it a hard error to (un)set such a target feature. For now, the x86 and ARM feature `soft-float` is on that list. We'll have to make some effort to collect more relevant features, and similar features from other targets, but that can happen after the basic infrastructure for this landed. (These features are being collected in https://github.com/rust-lang/rust/issues/131799.)
I've made this a warning for now to give people some time to speak up if this would break something.
MCP: https://github.com/rust-lang/compiler-team/issues/780
Support clobber_abi and vector registers (clobber-only) in PowerPC inline assembly
This supports `clobber_abi` which is one of the requirements of stabilization mentioned in #93335.
This basically does a similar thing I did in https://github.com/rust-lang/rust/pull/130630 to implement `clobber_abi` for s390x, but for powerpc/powerpc64/powerpc64le.
- This also supports vector registers (as `vreg`) as clobber-only, which need to support clobbering of them to implement `clobber_abi`.
- `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `altivec` target feature is enabled, but `core::arch::{powerpc,powerpc64}` vector types, `#[repr(simd)]`, and `core::simd` are all unstable, so the fact that this is currently a clobber-only should not be considered a blocker of clobber_abi implementation or stabilization. So I have not implemented it in this PR.
- See https://github.com/rust-lang/rust/pull/131551 (which is based on this PR) for a PR to implement this.
- (I'm not sticking to whether that PR should be a separate PR or part of this PR, so I can merge that PR into this PR if needed.)
Refs:
- PPC32 SysV: Section "Function Calling Sequence" in [System V Application Binary Interface PowerPC Processor Supplement](https://refspecs.linuxfoundation.org/elf/elfspec_ppc.pdf)
- PPC64 ELFv1: Section 3.2 "Function Calling Sequence" in [64-bit PowerPC ELF Application Binary Interface Supplement](https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.html#FUNC-CALL)
- PPC64 ELFv2: Section 2.2 "Function Calling Sequence" in [64-Bit ELF V2 ABI Specification](https://openpowerfoundation.org/specifications/64bitelfabi/)
- AIX: [Register usage and conventions](https://www.ibm.com/docs/en/aix/7.3?topic=overview-register-usage-conventions), [Special registers in the PowerPC®](https://www.ibm.com/docs/en/aix/7.3?topic=overview-special-registers-in-powerpc), [AIX vector programming](https://www.ibm.com/docs/en/aix/7.3?topic=concepts-aix-vector-programming)
- Register definition in LLVM: https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/PowerPC/PPCRegisterInfo.td#L189
If I understand the above four ABI documentations correctly, except for the PPC32 SysV's VR (Vector Registers) and 32-bit AIX (currently not supported by rustc)'s r13, there does not appear to be important differences in terms of implementing `clobber_abi`:
- The above four ABIs are consistent about FPR (0-13: volatile, 14-31: nonvolatile), CR (0-1,5-7: volatile, 2-4: nonvolatile), XER (volatile), and CTR (volatile).
- As for GPR, only the registers we are treating as reserved are slightly different
- r0, r3-r12 are volatile
- r1(sp, reserved), r14-31 are nonvolatile
- r2(reserved) is TOC pointer in PPC64 ELF/AIX, system-reserved register in PPC32 SysV (AFAIK used as thread pointer in Linux/BSDs)
- r13(reserved for non-32-bit-AIX) is thread pointer in PPC64 ELF, small data area pointer register in PPC32 SysV, "reserved under 64-bit environment; not restored across system calls[^r13]" in AIX)
- As for FPSCR, volatile in PPC64 ELFv1/AIX, some fields are volatile only in certain situations (rest are volatile) in PPC32 SysV/PPC64 ELFv2.
- As for VR (Vector Registers), it is not mentioned in PPC32 SysV, v0-v19 are volatile in both in PPC64 ELF/AIX, v20-v31 are nonvolatile in PPC64 ELF, reserved or nonvolatile depending on the ABI ([vec-extabi vs vec-default in LLVM](https://reviews.llvm.org/D89684), we are [using vec-extabi](https://github.com/rust-lang/rust/pull/131341#discussion_r1797693299)) in AIX:
> When the default Vector enabled mode is used, these registers are reserved and must not be used.
> In the extended ABI vector enabled mode, these registers are nonvolatile and their values are preserved across function calls
I left [FIXME comment about PPC32 SysV](https://github.com/rust-lang/rust/pull/131341#discussion_r1790496095) and added ABI check for AIX.
- As for VRSAVE, it is not mentioned in PPC32 SysV, nonvolatile in PPC64 ELFv1, reserved in PPC64 ELFv2/AIX
- As for VSCR, it is not mentioned in PPC32 SysV/PPC64 ELFv1, some fields are volatile only in certain situations (rest are volatile) in PPC64 ELFv2, volatile in AIX
We are currently treating r1-r2, r13 (non-32-bit-AIX), r29-r31, LR, CTR, and VRSAVE as reserved.
We are currently not processing anything about FPSCR and VSCR, but I feel those are things that should be processed by `preserves_flags` rather than `clobber_abi` if we need to do something about them. (However, PPCRegisterInfo.td in LLVM does not seem to define anything about them.)
Replaces #111335 and #124279
cc `@ecnelises` `@bzEq` `@lu-zero`
r? `@Amanieu`
`@rustbot` label +O-PowerPC +A-inline-assembly
[^r13]: callee-saved, according to [LLVM](6a6af0246b/llvm/lib/Target/PowerPC/PPCCallingConv.td (L322)) and [GCC](a9173a50e7/gcc/config/rs6000/rs6000.h (L859)).
The target name can be anything with custom target specs. Matching on
fields inside the target spec is much more robust than matching on the
target name.
- removed extra bits from predicates queries that are no longer needed in the new system
- removed the need for `non_erasable_generics` to take in tcx and DefId, removed unused arguments in callers
Rename Receiver -> LegacyReceiver
As part of the "arbitrary self types v2" project, we are going to replace the current `Receiver` trait with a new mechanism based on a new, different `Receiver` trait.
This PR renames the old trait to get it out the way. Naming is hard. Options considered included:
* HardCodedReceiver (because it should only be used for things in the standard library, and hence is sort-of hard coded)
* LegacyReceiver
* TargetLessReceiver
* OldReceiver
These are all bad names, but fortunately this will be temporary. Assuming the new mechanism proceeds to stabilization as intended, the legacy trait will be removed altogether.
Although we expect this trait to be used only in the standard library, we suspect it may be in use elsehwere, so we're landing this change separately to identify any surprising breakages.
It's known that this trait is used within the Rust for Linux project; a patch is in progress to remove their dependency.
This is a part of the arbitrary self types v2 project,
https://github.com/rust-lang/rfcs/pull/3519https://github.com/rust-lang/rust/issues/44874
r? `@wesleywiser`
As part of the "arbitrary self types v2" project, we are going to
replace the current `Receiver` trait with a new mechanism based on a
new, different `Receiver` trait.
This PR renames the old trait to get it out the way. Naming is hard.
Options considered included:
* HardCodedReceiver (because it should only be used for things in the
standard library, and hence is sort-of hard coded)
* LegacyReceiver
* TargetLessReceiver
* OldReceiver
These are all bad names, but fortunately this will be temporary.
Assuming the new mechanism proceeds to stabilization as intended, the
legacy trait will be removed altogether.
Although we expect this trait to be used only in the standard library,
we suspect it may be in use elsehwere, so we're landing this change
separately to identify any surprising breakages.
It's known that this trait is used within the Rust for Linux project; a
patch is in progress to remove their dependency.
This is a part of the arbitrary self types v2 project,
https://github.com/rust-lang/rfcs/pull/3519https://github.com/rust-lang/rust/issues/44874
r? @wesleywiser
rust_for_linux: -Zregparm=<N> commandline flag for X86 (#116972)
Command line flag `-Zregparm=<N>` for X86 (32-bit) for rust-for-linux: https://github.com/rust-lang/rust/issues/116972
Implemented in the similar way as fastcall/vectorcall support (args are marked InReg if fit).
Add intrinsics `fmuladd{f16,f32,f64,f128}`. This computes `(a * b) +
c`, to be fused if the code generator determines that (i) the target
instruction set has support for a fused operation, and (ii) that the
fused operation is more efficient than the equivalent, separate pair
of `mul` and `add` instructions.
https://llvm.org/docs/LangRef.html#llvm-fmuladd-intrinsic
MIRI support is included for f32 and f64.
The codegen_cranelift uses the `fma` function from libc, which is a
correct implementation, but without the desired performance semantic. I
think this requires an update to cranelift to expose a suitable
instruction in its IR.
I have not tested with codegen_gcc, but it should behave the same
way (using `fma` from libc).
codegen_ssa: consolidate tied target checks
Fixes#105110.
Fixes#105111.
`rustc_codegen_llvm` and `rustc_codegen_gcc` duplicated logic for checking if tied target features were partially enabled. This PR consolidates these checks into `rustc_codegen_ssa` in the `codegen_fn_attrs` query, which also is run pre-monomorphisation for each function, which ensures that this check is run for unused functions, as would be expected.
Also adds a test confirming that enabling one tied feature doesn't imply another - the appropriate error for this was already being emitted. I did a bisect and narrowed it down to two patches it was likely to be - something in #128796, probably #128221 or #128679.
`rustc_codegen_llvm` and `rustc_codegen_gcc` duplicated logic for
checking if tied target features were partially enabled. This commit
consolidates these checks into `rustc_codegen_ssa` in the
`codegen_fn_attrs` query, which also is run pre-monomorphisation for
each function, which ensures that this check is run for unused functions,
as would be expected.
llvm: replace some deprecated functions
`LLVMMDStringInContext` and `LLVMMDNodeInContext` are deprecated, replace them with `LLVMMDStringInContext2` and `LLVMMDNodeInContext2`.
Also replace `Value` with `Metadata` in some function signatures for better consistency.
It's crazy to have the integer methods in something close to random
order.
The reordering makes the gaps clear: `const_i64`, `const_i128`,
`const_isize`, and `const_u16`. I guess they just aren't needed.
Supertraits of `BuilderMethods` are all called `XyzBuilderMethods`.
Supertraits of `CodegenMethods` are all called `XyzMethods`. This commit
changes the latter to `XyzCodegenMethods`, for consistency.
It has `Backend` and `Deref` boudns, plus an associated type
`CodegenCx`, and it has a single use. This commit "inlines" it into
`BuilderMethods`, which makes the complicated backend trait situation a
little simpler.
Don't leave debug locations for constants sitting on the builder indefinitely
Because constants are currently emitted *before* the prologue, leaving the debug location on the IRBuilder spills onto other instructions in the prologue and messes up both line numbers as well as the point LLVM chooses to be the prologue end.
Example LLVM IR (irrelevant IR elided):
Before:
```
define internal { i64, i64 } `@_ZN3tmp3Foo18var_return_opt_try17he02116165b0fc08cE(ptr` align 8 %self) !dbg !347 { start:
%self.dbg.spill = alloca [8 x i8], align 8
%_0 = alloca [16 x i8], align 8
%residual.dbg.spill = alloca [0 x i8], align 1
#dbg_declare(ptr %residual.dbg.spill, !353, !DIExpression(), !357)
store ptr %self, ptr %self.dbg.spill, align 8, !dbg !357
#dbg_declare(ptr %self.dbg.spill, !350, !DIExpression(), !358)
```
After:
```
define internal { i64, i64 } `@_ZN3tmp3Foo18var_return_opt_try17h00b17d08874ddd90E(ptr` align 8 %self) !dbg !347 { start:
%self.dbg.spill = alloca [8 x i8], align 8
%_0 = alloca [16 x i8], align 8
%residual.dbg.spill = alloca [0 x i8], align 1
#dbg_declare(ptr %residual.dbg.spill, !353, !DIExpression(), !357)
store ptr %self, ptr %self.dbg.spill, align 8
#dbg_declare(ptr %self.dbg.spill, !350, !DIExpression(), !358)
```
Note in particular how !357 from %residual.dbg.spill's dbg_declare no longer falls through onto the store to %self.dbg.spill. This fixes argument values at entry when the constant is a ZST (e.g. `<Option as Try>::Residual`). This fixes#130003 (but note that it does *not* fix issues with argument values and non-ZST constants, which emit their own stores that have debug info on them, like #128945).
r? `@michaelwoerister`
Because constants are currently emitted *before* the prologue, leaving the
debug location on the IRBuilder spills onto other instructions in the prologue
and messes up both line numbers as well as the point LLVM chooses to be the
prologue end.
Example LLVM IR (irrelevant IR elided):
Before:
define internal { i64, i64 } @_ZN3tmp3Foo18var_return_opt_try17he02116165b0fc08cE(ptr align 8 %self) !dbg !347 {
start:
%self.dbg.spill = alloca [8 x i8], align 8
%_0 = alloca [16 x i8], align 8
%residual.dbg.spill = alloca [0 x i8], align 1
#dbg_declare(ptr %residual.dbg.spill, !353, !DIExpression(), !357)
store ptr %self, ptr %self.dbg.spill, align 8, !dbg !357
#dbg_declare(ptr %self.dbg.spill, !350, !DIExpression(), !358)
After:
define internal { i64, i64 } @_ZN3tmp3Foo18var_return_opt_try17h00b17d08874ddd90E(ptr align 8 %self) !dbg !347 {
start:
%self.dbg.spill = alloca [8 x i8], align 8
%_0 = alloca [16 x i8], align 8
%residual.dbg.spill = alloca [0 x i8], align 1
#dbg_declare(ptr %residual.dbg.spill, !353, !DIExpression(), !357)
store ptr %self, ptr %self.dbg.spill, align 8
#dbg_declare(ptr %self.dbg.spill, !350, !DIExpression(), !358)
Note in particular how !357 from %residual.dbg.spill's dbg_declare no longer
falls through onto the store to %self.dbg.spill. This fixes argument values
at entry when the constant is a ZST (e.g. <Option as Try>::Residual). This
fixes#130003 (but note that it does *not* fix issues with argument values and
non-ZST constants, which emit their own stores that have debug info on them,
like #128945).
This shrinks `compiler/rustc_codegen_gcc/Cargo.lock` quite a bit. The
only remaining dependencies in `compiler/rustc_codegen_gcc/Cargo.lock`
are `gccjit`, `lang_tester`, and `boml`, all of which aren't used in any
other compiler crates.
The commit also reorders and adds comments to the `extern crate` items
so they match those in miri.
simd_shuffle intrinsic: allow argument to be passed as vector
See https://github.com/rust-lang/rust/issues/128738 for context.
I'd like to get rid of [this hack](6c0b89dfac/compiler/rustc_codegen_ssa/src/mir/block.rs (L922-L935)). https://github.com/rust-lang/rust/pull/128537 almost lets us do that since constant SIMD vectors will then be passed as immediate arguments. However, simd_shuffle for some reason actually takes an *array* as argument, not a vector, so the hack is still required to ensure that the array becomes an immediate (which then later stages of codegen convert into a vector, as that's what LLVM needs).
This PR prepares simd_shuffle to also support a vector as the `idx` argument. Once this lands, stdarch can hopefully be updated to pass `idx` as a vector, and then support for arrays can be removed, which finally lets us get rid of that hack.
Shrink `TyKind::FnPtr`.
By splitting the `FnSig` within `TyKind::FnPtr` into `FnSigTys` and `FnHeader`, which can be packed more efficiently. This reduces the size of the hot `TyKind` type from 32 bytes to 24 bytes on 64-bit platforms. This reduces peak memory usage by a few percent on some benchmarks. It also reduces cache misses and page faults similarly, though this doesn't translate to clear cycles or wall-time improvements on CI.
r? `@compiler-errors`
bootstrap: don't use rustflags for `--rustc-args`
r? `@onur-ozkan`
This is going to require a bit of context.
https://github.com/rust-lang/rust/pull/47558 has added `--rustc-args` to `./x test` to allow passing flags when building `compiletest` tests. It was made specifically because using `RUSTFLAGS` would rebuild the compiler/stdlib, which would in turn require the flag you want to build tests with to successfully bootstrap.
#113178 made the request that it also works for other tests and doctests. This is not trivial to support across the board for `library`/`compiler` unit-tests/doctests and across stages. This issue was closed in #113948 by using `RUSTFLAGS`, seemingly incorrectly since https://github.com/rust-lang/rust/pull/123489 fixed that part to make it work.
Unfortunately #123489/#113948 have regressed the goals of `--rustc-args`:
- now we can't use rustc args that don't bootstrap, to run the UI tests: we can't test incomplete features. The new trait solver doesn't bootstrap, in-progress borrowck/polonius changes don't bootstrap, some other features are similarly incomplete, etc.
- using the flag now rebuilds everything from scratch: stage0 stdlib, stage1 compiler, stage1 stdlib. You don't need to re-do all this to compile UI tests, you only need the latter to run stdlib tests with a new flag, etc. This happens for contributors, but also on CI today. (Not to mention that in doing that it will rebuild things with flags that are not meant to be used, e.g. stdlib cfgs that don't exist in the compiler; or you could also imagine that this silently enables flags that were not meant to be enabled in this way).
Since then, bd71c71ea0 has started using it to test a stdlib feature, relying on the fact that it now rebuilds everything. So #125011 also regressed CI times more than necessary because it rebuilds everything instead of just stage 1 stdlib.
It's not easy for me to know how to properly fix#113178 in bootstrap, but #113948/#123489 are not it since they regress the initial intent. I'd think bootstrap would have to know from the list of test targets that are passed that the `library` or `compiler` paths that are passed could require rebuilding these crates with different rustflags, probably also depending on stages. Therefore I would not be able to fix it, and will just try in this PR to unregress the situation to unblock the initial use-case.
It seems miri now also uses `./x miri --rustc-args` in this incorrect meaning to rebuild the `library` paths they support to run with the new args. I've not made any bootstrap changes related to `./x miri` in this PR, so `--rustc-args` wouldn't work there anymore. I'd assume this would need to use rustflags again but I don't know how to make that work properly in bootstrap, hence opening as draft, so you can tell me how to do that. I assume we don't want to break their use-case again now that it exists, even though there are ways to use `./x test` to do exactly that.
`RUSTFLAGS_NOT_BOOTSTRAP=flag ./x test library/std` is a way to run unit tests with a new flag without rebuilding everything, while with #123489 there is no way anymore to run tests with a flag that doesn't bootstrap.
---
edit: after review, this PR:
- renames `./x test --rustc-args` to `./x test --compiletest-rustc-args` as it only applies there, and cannot use rustflags for this purpose.
- fixes the regression that using these args rebuilt everything from scratch
- speeds up some CI jobs via the above point
- removes `./x miri --rustc-args` as only library tests are supported, needs to rebuild libstd, and `./x miri --compiletest-rustc-args` wouldn't work since compiletests are not supported.
