`Decoder` has two impls:
- opaque: this impl is already partly infallible, i.e. in some places it
currently panics on failure (e.g. if the input is too short, or on a
bad `Result` discriminant), and in some places it returns an error
(e.g. on a bad `Option` discriminant). The number of places where
either happens is surprisingly small, just because the binary
representation has very little redundancy and a lot of input reading
can occur even on malformed data.
- json: this impl is fully fallible, but it's only used (a) for the
`.rlink` file production, and there's a `FIXME` comment suggesting it
should change to a binary format, and (b) in a few tests in
non-fundamental ways. Indeed #85993 is open to remove it entirely.
And the top-level places in the compiler that call into decoding just
abort on error anyway. So the fallibility is providing little value, and
getting rid of it leads to some non-trivial performance improvements.
Much of this commit is pretty boring and mechanical. Some notes about
a few interesting parts:
- The commit removes `Decoder::{Error,error}`.
- `InternIteratorElement::intern_with`: the impl for `T` now has the same
optimization for small counts that the impl for `Result<T, E>` has,
because it's now much hotter.
- Decodable impls for SmallVec, LinkedList, VecDeque now all use
`collect`, which is nice; the one for `Vec` uses unsafe code, because
that gave better perf on some benchmarks.
Update rayon and rustc-rayon
This updates rayon for various tools and rustc-rayon for the compiler's parallel mode.
- rayon v1.3.1 -> v1.5.1
- rayon-core v1.7.1 -> v1.9.1
- rustc-rayon v0.3.1 -> v0.3.2
- rustc-rayon-core v0.3.1 -> v0.3.2
... and indirectly, this updates all of crossbeam-* to their latest versions.
Fixes#92677 by removing crossbeam-queue, but there's still a lingering question about how tidy discovers "runtime" dependencies. None of this is truly in the standard library's dependency tree at all.
Replace usages of vec![].into_iter with [].into_iter
`[].into_iter` is idiomatic over `vec![].into_iter` because its simpler and faster (unless the vec is optimized away in which case it would be the same)
So we should change all the implementation, documentation and tests to use it.
I skipped:
* `src/tools` - Those are copied in from upstream
* `src/test/ui` - Hard to tell if `vec![].into_iter` was used intentionally or not here and not much benefit to changing it.
* any case where `vec![].into_iter` was used because we specifically needed a `Vec::IntoIter<T>`
* any case where it looked like we were intentionally using `vec![].into_iter` to test it.
Fixes#92266
In some `HashStable` impls, we use a cache to avoid re-computing
the same `Fingerprint` from the same structure (e.g. an `AdtDef`).
However, the `StableHashingContext` used can be configured to
perform hashing in different ways (e.g. skipping `Span`s). This
configuration information is not included in the cache key,
which will cause an incorrect `Fingerprint` to be used if
we hash the same structure with different `StableHashingContext`
settings.
To fix this, the configuration settings of `StableHashingContext`
are split out into a separate `HashingControls` struct. This
struct is used as part of the cache key, ensuring that our caches
always produce the correct result for the given settings.
With this in place, we now turn off `Span` hashing during the
entire process of computing the hash included in legacy symbols.
This current has no effect, but will matter when a future PR
starts hashing more `Span`s that we currently skip.
Implement StableHash for BitSet and BitMatrix via Hash
This fixes an issue where bit sets / bit matrices the same word
content but a different domain size would receive the same hash.
Avoid sorting in hash map stable hashing
Suggested by `@the8472` [here](https://github.com/rust-lang/rust/pull/89404#issuecomment-991813333). I hope that I understood it right, I replaced the sort with modular multiplication, which should be commutative.
Can I ask for a perf. run? However, locally it didn't help at all. Creating the `StableHasher` all over again is probably slowing it down quite a lot. And using `FxHasher` is not straightforward, because the keys and values only implement `HashStable` (and probably they shouldn't be just hashed via `Hash` anyway for it to actually be stable).
Maybe the `StableHash` interface could be changed somehow to better suppor these scenarios where the hasher is short-lived. Or the `StableHasher` implementation could have variants with e.g. a shorter buffer for these scenarios.
Slightly optimize hash map stable hashing
I was profiling some of the `rustc-perf` benchmarks locally and noticed that quite some time is spent inside the stable hash of hashmaps. I tried to use a `SmallVec` instead of a `Vec` there, which helped very slightly.
Then I tried to remove the sorting, which was a bottleneck, and replaced it with insertion into a binary heap. Locally, it yielded nice improvements in instruction counts and RSS in several benchmarks for incremental builds. The implementation could probably be much nicer and possibly extended to other stable hashes, but first I wanted to test the perf impact properly.
Can I ask someone to do a perf run? Thank you!
This largely avoids remapping from and to the 'real' indices, with the exception
of predecessor lookup and the final merge back, and is conceptually better.
As the paper indicates, the unprocessed vertices in the DFS tree and processed
vertices are disjoint, and we can use them in the same space, tracking only the index
of the split.
This replaces the previous implementation with the simple variant of
Lengauer-Tarjan, which performs better in the general case. Performance on the
keccak benchmark is about equivalent between the two, but we don't see
regressions (and indeed see improvements) on other benchmarks, even on a
partially optimized implementation.
The implementation here follows that of the pseudocode in "Linear-Time
Algorithms for Dominators and Related Problems" thesis by Loukas Georgiadis. The
next few commits will optimize the implementation as suggested in the thesis.
Several related works are cited in the comments within the implementation, as
well.
Implement the simple Lengauer-Tarjan algorithm
This replaces the previous implementation (from #34169), which has not been
optimized since, with the simple variant of Lengauer-Tarjan which performs
better in the general case. A previous attempt -- not kept in commit history --
attempted a replacement with a bitset-based implementation, but this led to
regressions on perf.rust-lang.org benchmarks and equivalent wins for the keccak
benchmark, so was rejected.
The implementation here follows that of the pseudocode in "Linear-Time
Algorithms for Dominators and Related Problems" thesis by Loukas Georgiadis. The
next few commits will optimize the implementation as suggested in the thesis.
Several related works are cited in the comments within the implementation, as
well.
On the keccak benchmark, we were previously spending 15% of our cycles computing
the NCA / intersect function; this function is quite expensive, especially on
modern CPUs, as it chases pointers on every iteration in a tight loop. With this
commit, we spend ~0.05% of our time in dominator computation.
There's a conversation in the tracking issue about possibly unaccepting `in_band_lifetimes`, but it's used heavily in the compiler, and thus there'd need to be a bunch of PRs like this if that were to happen.
So here's one to see how much of an impact it has.
(Oh, and I removed `nll` while I was here too, since it didn't seem needed. Let me know if I should put that back.)
Implement write() method for Box<MaybeUninit<T>>
This adds method similar to `MaybeUninit::write` main difference being
it returns owned `Box`. This can be used to elide copy from stack
safely, however it's not currently tested that the optimization actually
occurs.
Analogous methods are not provided for `Rc` and `Arc` as those need to
handle the possibility of sharing. Some version of them may be added in
the future.
This was discussed in #63291 which this change extends.
This adds method similar to `MaybeUninit::write` main difference being
it returns owned `Box`. This can be used to elide copy from stack
safely, however it's not currently tested that the optimization actually
occurs.
Analogous methods are not provided for `Rc` and `Arc` as those need to
handle the possibility of sharing. Some version of them may be added in
the future.
This was discussed in #63291 which this change extends.
Revert "Add rustc lint, warning when iterating over hashmaps"
Fixes perf regressions introduced in https://github.com/rust-lang/rust/pull/90235 by temporarily reverting the relevant PR.
Particularly for ctfe-stress-4, the hashing of byte slices as part of the
MIR Allocation is quite hot. Previously, we were falling back on byte-by-byte
copying of the slice into the SipHash buffer (64 bytes long) before hashing a 64
byte chunk, and then doing that again and again.
This should hopefully be an improvement for that code.
Stabilize `const_panic`
Closes#51999
FCP completed in #89006
```@rustbot``` label +A-const-eval +A-const-fn +T-lang
cc ```@oli-obk``` for review (not `r?`'ing as not on lang team)
Rollup of 12 pull requests
Successful merges:
- #88795 (Print a note if a character literal contains a variation selector)
- #89015 (core::ascii::escape_default: reduce struct size)
- #89078 (Cleanup: Remove needless reference in ParentHirIterator)
- #89086 (Stabilize `Iterator::map_while`)
- #89096 ([bootstrap] Improve the error message when `ninja` is not found to link to installation instructions)
- #89113 (dont `.ensure()` the `thir_abstract_const` query call in `mir_build`)
- #89114 (Fixes a technicality regarding the size of C's `char` type)
- #89115 (⬆️ rust-analyzer)
- #89126 (Fix ICE when `indirect_structural_match` is allowed)
- #89141 (Impl `Error` for `FromSecsError` without foreign type)
- #89142 (Fix match for placeholder region)
- #89147 (add case for checking const refs in check_const_value_eq)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Migrate in-tree crates to 2021
This replaces #89075 (cherry picking some of the commits from there), and closes#88637 and fixes#89074.
It excludes a migration of the library crates for now (see tidy diff) because we have some pending bugs around macro spans to fix there.
I instrumented bootstrap during the migration to make sure all crates moved from 2018 to 2021 had the compatibility warnings applied first.
Originally, the intent was to support cargo fix --edition within bootstrap, but this proved fairly difficult to pull off. We'd need to architect the check functionality to support running cargo check and cargo fix within the same x.py invocation, and only resetting sysroots on check. Further, it was found that cargo fix doesn't behave too well with "not quite workspaces", such as Clippy which has several crates. Bootstrap runs with --manifest-path ... for all the tools, and this makes cargo fix only attempt migration for that crate. We can't use e.g. --workspace due to needing to maintain sysroots for different phases of compilation appropriately.
It is recommended to skip the mass migration of Cargo.toml's to 2021 for review purposes; you can also use `git diff d6cd2c6c87 -I'^edition = .20...$'` to ignore the edition = 2018/21 lines in the diff.
Rework DepthFirstSearch API
This expands the API to be more flexible, allowing for more visitation patterns
on graphs. This will be useful to avoid extra datasets (and allocations) in
cases where the expanded DFS API is sufficient.
This also fixes a bug with the previous DFS constructor, which left the start
node not marked as visited (even though it was immediately returned).
Commit written by ```@nikomatsakis``` originally, cherry picked from several commits in work on never type stabilization, but stands alone.
This expands the API to be more flexible, allowing for more visitation patterns
on graphs. This will be useful to avoid extra datasets (and allocations) in
cases where the expanded DFS API is sufficient.
This also fixes a bug with the previous DFS constructor, which left the start
node not marked as visited (even though it was immediately returned).
Remove SmallVector mention
SmallVector is long gone, as it's been first replaced
by OneVector in commit e5e6375352,
which then has been removed entirely in favour of SmallVec in
commit 130a32fa72.
SmallVector is long gone, as it's been first replaced
by OneVector in commit e5e6375352,
which then has been removed entirely in favour of SmallVec in
commit 130a32fa72.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
