It lints against features that are inteded to be internal to the
compiler and standard library. Implements MCP #596.
We allow `internal_features` in the standard library and compiler as those
use many features and this _is_ the standard library from the "internal to the compiler and
standard library" after all.
Marking some features as internal wasn't exactly the most scientific approach, I just marked some
mostly obvious features. While there is a categorization in the macro,
it's not very well upheld (should probably be fixed in another PR).
We always pass `-Ainternal_features` in the testsuite
About 400 UI tests and several other tests use internal features.
Instead of throwing the attribute on each one, just always allow them.
There's nothing wrong with testing internal features^^
Replace RPITIT current impl with new strategy that lowers as a GAT
This PR replaces the current implementation of RPITITs with the new implementation that we had under -Zlower-impl-trait-in-trait-to-assoc-ty flag that lowers the RPIT as a GAT on the trait and on the impls that implement that trait.
Opening this PR as a draft because this goes after #112682, ~#112981~ and ~#112983~.
As soon as those are merged, I can rebase and we should run perf, crater and test a lot.
r? `@compiler-errors`
Add filter with following segment while lookup typo for path
From the discussion: https://github.com/rust-lang/rust/pull/112917#discussion_r1239150173
Seems we can not get the assoc items for `Struct`, `Enum` in the resolving phase.
A obvious filter is avoid suggesting the same name with the following segment path.
Use `following_seg` can extend the function `smart_resolve_partial_mod_path_errors` for more scenarios, such as `std::sync_error::atomic::AtomicBool` in test case.
r? `@estebank`
- Either explicitly annotate `let x: () = expr;` where `x` has unit
type, or remove the unit binding to leave only `expr;` instead.
- Fix disjoint-capture-in-same-closure test
Add a tidy check to find unexpected files in UI tests, and clean up the results
While looking at UI tests, I noticed several weird files that were not being tested, some from even pre-1.0. I added a tidy check that fails if any files not known to compiletest or not used in tests (via manual list) are present in the ui tests.
Unfortunately the root entry limit had to be raised by 1 to accommodate the stderr file for one of the tests.
r? `@fee1-dead`
Note user-facing types of coercion failure
When coercing, for example, `Box<A>` into `Box<dyn B>`, make sure that any failure notes mention *those* specific types, rather than mentioning inner types, like "the cast from `A` to `dyn B`".
I expect end-users are often confused when we skip layers of types and only mention the "innermost" part of a coercion, especially when other notes point at HIR, e.g. #111406.
Add support for `cfg(overflow_checks)`
This PR adds support for detecting if overflow checks are enabled in similar fashion as `debug_assertions` are detected. Possible use-case of this, for example, if we want to use checked integer casts in builds with overflow checks, e.g.
```rust
pub fn cast(val: usize)->u16 {
if cfg!(overflow_checks) {
val.try_into().unwrap()
}
else{
vas as _
}
}
```
Resolves#91130.
This PR adds support for detecting if overflow checks are enabled in similar fashion as debug_assertions are detected.
Possible use-case of this, for example, if we want to use checked integer casts in builds with overflow checks, e.g.
```rust
pub fn cast(val: usize)->u16 {
if cfg!(overflow_checks) {
val.try_into().unwrap()
}
else{
vas as _
}
}
```
Resolves#91130.
Tracking issue: #111466.
Implement builtin # syntax and use it for offset_of!(...)
Add `builtin #` syntax to the parser, as well as a generic infrastructure to support both item and expression position builtin syntaxes. The PR also uses this infrastructure for the implementation of the `offset_of!` macro, added by #106934.
cc `@petrochenkov` `@DrMeepster`
cc #110680 `builtin #` tracking issue
cc #106655 `offset_of!` tracking issue
Stabilize raw-dylib, link_ordinal, import_name_type and -Cdlltool
This stabilizes the `raw-dylib` feature (#58713) for all architectures (i.e., `x86` as it is already stable for all other architectures).
Changes:
* Permit the use of the `raw-dylib` link kind for x86, the `link_ordinal` attribute and the `import_name_type` key for the `link` attribute.
* Mark the `raw_dylib` feature as stable.
* Stabilized the `-Zdlltool` argument as `-Cdlltool`.
* Note the path to `dlltool` if invoking it failed (we don't need to do this if `dlltool` returns an error since it prints its path in the error message).
* Adds tests for `-Cdlltool`.
* Adds tests for being unable to find the dlltool executable, and dlltool failing.
* Fixes a bug where we were checking the exit code of dlltool to see if it failed, but dlltool always returns 0 (indicating success), so instead we need to check if anything was written to `stderr`.
NOTE: As previously noted (https://github.com/rust-lang/rust/pull/104218#issuecomment-1315895618) using dlltool within rustc is temporary, but this is not the first time that Rust has added a temporary tool use and argument: https://github.com/rust-lang/rust/pull/104218#issuecomment-1318720482
Big thanks to ``````@tbu-`````` for the first version of this PR (#104218)
Add cross-language LLVM CFI support to the Rust compiler
This PR adds cross-language LLVM Control Flow Integrity (CFI) support to the Rust compiler by adding the `-Zsanitizer-cfi-normalize-integers` option to be used with Clang `-fsanitize-cfi-icall-normalize-integers` for normalizing integer types (see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space). For more information about LLVM CFI and cross-language LLVM CFI support for the Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and -Zsanitizer-cfi-normalize-integers, and requires proper (i.e., non-rustc) LTO (i.e., -Clinker-plugin-lto).
Thank you again, ``@bjorn3,`` ``@nikic,`` ``@samitolvanen,`` and the Rust community for all the help!
This commit adds cross-language LLVM Control Flow Integrity (CFI)
support to the Rust compiler by adding the
`-Zsanitizer-cfi-normalize-integers` option to be used with Clang
`-fsanitize-cfi-icall-normalize-integers` for normalizing integer types
(see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust
-compiled code "mixed binaries" (i.e., for when C or C++ and Rust
-compiled code share the same virtual address space). For more
information about LLVM CFI and cross-language LLVM CFI support for the
Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and
-Zsanitizer-cfi-normalize-integers, and requires proper (i.e.,
non-rustc) LTO (i.e., -Clinker-plugin-lto).
Mark`feature(return_position_impl_trait_in_trait)` and`feature(async_fn_in_trait)` as not incomplete
I think they've graduated, since as far as I'm aware, they don't cause compiler crashes or unsoundness anymore.
Stabilize debugger_visualizer
This stabilizes the `debugger_visualizer` attribute (#95939).
* Marks the `debugger_visualizer` feature as `accepted`.
* Marks the `debugger_visualizer` attribute as `ungated`.
* Deletes feature gate test, removes feature gate from other tests.
Closes#95939
My type ascription
Oh rip it out
Ah
If you think we live too much then
You can sacrifice diagnostics
Don't mix your garbage
Into my syntax
So many weird hacks keep diagnostics alive
Yet I don't even step outside
So many bad diagnostics keep tyasc alive
Yet tyasc doesn't even bother to survive!
Split out a separate feature gate for impl trait in associated types
in https://github.com/rust-lang/rust/issues/107645 it was decided that we'll take a new route for type alias impl trait. The exact route isn't clear yet, so while I'm working on implementing some of these proposed changes (e.g. in https://github.com/rust-lang/rust/pull/110010) to be able to experiment with them, I will also work on stabilizing another sugar version first: impl trait in associated types. Similarly I'll look into creating feature gates for impl trait in const/static types.
This PR does nothing but split the feature gate, so that you need to enable a different feature gate for
```rust
impl Trait for Type {
type Assoc = impl SomeTrait;
}
```
than what you need for `type Foo = impl SomeTrait;`
Remove `identity_future` indirection
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]`annotation.
Fixes https://github.com/rust-lang/rust/issues/104826.
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]` annotation.
