`waitqueue` clarifications for SGX platform
The documentation of `waitqueue` functions on the `x86_64-fortanix-unknown-sgx` platform is incorrect at some places and on others missing. This PR improves upon this.
cc: `@jethrogb`
Some data-independent timing vector instructions may have subtle data-dependent
timing due to MXCSR configuration; dependent on (potentially secret) data
instruction retirement may be delayed by one cycle.
Implement read_buf for TcpStream, Stdin, StdinLock, ChildStdout,
ChildStderr (and internally for AnonPipe, Handle, Socket), so
that it skips buffer initialization.
The other provided methods like read_to_string and read_to_end are
implemented in terms of read_buf and so benefit from the optimization
as well.
This commit also implements read_vectored and is_read_vectored where
applicable.
Reimplement std's thread parker on top of events on SGX
Mutex and Condvar are being replaced by more efficient implementations, which need thread parking themselves (see #93740). Therefore, the generic `Parker` needs to be replaced on all platforms where the new lock implementation will be used.
SGX enclaves have a per-thread event state, which allows waiting for and setting specific bits. This is already used by the current mutex implementation. The thread parker can however be much more efficient, as it only needs to store the `TCS` address of one thread. This address is stored in a state variable, which can also be set to indicate the thread was already notified.
`park_timeout` does not guard against spurious wakeups like the current condition variable does. This is allowed by the API of `Parker`, and I think it is better to let users handle these wakeups themselves as the guarding is quite expensive and might not be necessary.
`@jethrogb` as you wrote the initial SGX support for `std`, I assume you are the target maintainer? Could you help me test this, please? Lacking a x86_64 chip, I can't run SGX.
Optimize TLS on Windows
This implements the suggestion in the current TLS code to embed the linked list of destructors in the `StaticKey` structure to save allocations. Additionally, locking is avoided when no destructor needs to be run. By using one Windows-provided `Once` per key instead of a global lock, locking is more finely-grained (this unblocks #100579).
Refactor some `std` code that works with pointer offstes
This PR replaces `pointer::offset` in standard library with `pointer::add` and `pointer::sub`, [re]moving some casts and using `.addr()` while we are at it.
This is a more complicated refactor than all other sibling PRs, so take a closer look when reviewing, please 😃 (though I've checked this multiple times and it looks fine).
r? ````@scottmcm````
_split off from #100746, continuation of #100822_
Make `ReentrantMutex` movable and `const`
As `MovableMutex` is now `const`, it can be used to simplify the implementation and interface of the internal reentrant mutex type. Consequently, the standard error stream does not need to be wrapped in `OnceLock` and `OnceLock::get_or_init_pin()` can be removed.
This makes it possible to instruct libstd to never touch the signal
handler for `SIGPIPE`, which makes programs pipeable by default (e.g.
with `./your-program | head -n 1`) without `ErrorKind::BrokenPipe`
errors.
Use pointer `is_aligned*` methods
This PR replaces some manual alignment checks with calls to `pointer::{is_aligned, is_aligned_to}` and removes a useless pointer cast.
r? `@scottmcm`
_split off from #100746_
Replace most uses of `pointer::offset` with `add` and `sub`
As PR title says, it replaces `pointer::offset` in compiler and standard library with `pointer::add` and `pointer::sub`. This generally makes code cleaner, easier to grasp and removes (or, well, hides) integer casts.
This is generally trivially correct, `.offset(-constant)` is just `.sub(constant)`, `.offset(usized as isize)` is just `.add(usized)`, etc. However in some cases we need to be careful with signs of things.
r? ````@scottmcm````
_split off from #100746_
Implement network primitives with ideal Rust layout, not C system layout
This PR is the result of this internals forum thread: https://internals.rust-lang.org/t/why-are-socketaddrv4-socketaddrv6-based-on-low-level-sockaddr-in-6/13321.
Instead of basing `std:::net::{Ipv4Addr, Ipv6Addr, SocketAddrV4, SocketAddrV6}` on system (C) structs, they are encoded in a more optimal and idiomatic Rust way.
This changes the public API of std by introducing structural equality impls for all four types here, which means that `match ipv4addr { SOME_CONSTANT => ... }` will now compile, whereas previously this was an error. No other intentional changes are introduced to public API.
It's possible to observe the current layout of these types (e.g., by pointer casting); most but not all libraries which were found by Crater to do this have had updates issued and affected versions yanked. See report below.
### Benefits of this change
- It will become possible to move these fundamental network types from `std` into `core` ([RFC](https://github.com/rust-lang/rfcs/pull/2832)).
- Some methods that can't be made `const fn`s today can be made `const fn`s with this change.
- `SocketAddrV4` only occupies 6 bytes instead of 16 bytes.
- These simple primitives become easier to read and uses less `unsafe`.
- Makes these types support structural equality, which means you can now (for instance) match an `Ipv4Addr` against a constant
### ~Remaining~ Previous problems
This change obviously changes the memory layout of the types. And it turns out some libraries invalidly assumes the memory layout and does very dangerous pointer casts to convert them. These libraries will have undefined behaviour and perform invalid memory access until patched.
- [x] - `mio` - Issue: https://github.com/tokio-rs/mio/issues/1386.
- [x] `0.7` branch https://github.com/tokio-rs/mio/pull/1388
- [x] `0.7.6` published https://github.com/tokio-rs/mio/pull/1398
- [x] Yank all `0.7` versions older than `0.7.6`
- [x] Report `<0.7.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0081.html
- [x] - `socket2` - Issue: https://github.com/rust-lang/socket2-rs/issues/119.
- [x] `0.3.x` branch https://github.com/rust-lang/socket2-rs/pull/120
- [x] `0.3.16` published
- [x] `master` branch https://github.com/rust-lang/socket2-rs/pull/122
- [x] Yank all `0.3` versions older than `0.3.16`
- [x] Report `<0.3.16` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0079.html
- [x] - `net2` - Issue: https://github.com/deprecrated/net2-rs/issues/105
- [x] https://github.com/deprecrated/net2-rs/pull/106
- [x] `0.2.36` published
- [x] Yank all `0.2` versions older than `0.2.36`
- [x] Report `<0.2.36` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0078.html
- [x] - `miow` - Issue: https://github.com/yoshuawuyts/miow/issues/38
- [x] `0.3.x` - https://github.com/yoshuawuyts/miow/pull/39
- [x] `0.3.6` published
- [x] `0.2.x` - https://github.com/yoshuawuyts/miow/pull/40
- [x] `0.2.2` published
- [x] Yanked all `0.2` versions older than `0.2.2`
- [x] Yanked all `0.3` versions older than `0.3.6`
- [x] Report `<0.2.2` and `<0.3.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0080.html
- [x] - `quinn master` (aka what became 0.7) - https://github.com/quinn-rs/quinn/issues/968https://github.com/quinn-rs/quinn/pull/987
- [x] - `quinn 0.6` - https://github.com/quinn-rs/quinn/pull/1045
- [x] - `quinn 0.5` - https://github.com/quinn-rs/quinn/pull/1046
- [x] - Release `0.7.0`, `0.6.2` and `0.5.4`
- [x] - `nb-connect` - https://github.com/smol-rs/nb-connect/issues/1
- [x] - Release `1.0.3`
- [x] - Yank all versions older than `1.0.3`
- [x] - `shadowsocks-rust` - https://github.com/shadowsocks/shadowsocks-rust/issues/462
- [ ] - `rio` - https://github.com/spacejam/rio/issues/44
- [ ] - `seaslug` - https://github.com/spacejam/seaslug/issues/1
#### Fixed crate versions
All crates I have found that assumed the memory layout have been fixed and published. The crates and versions that will continue working even as/if this PR is merged is (please upgrade these to help unblock this PR):
* `net2 0.2.36`
* `socket2 0.3.16`
* `miow 0.2.2`
* `miow 0.3.6`
* `mio 0.7.6`
* `mio 0.6.23` - Never had the invalid assumption itself, but has now been bumped to only allow fixed dependencies (`net2` + `miow`)
* `nb-connect 1.0.3`
* `quinn 0.5.4`
* `quinn 0.6.2`
### Release notes draft
This release changes the memory layout of `Ipv4Addr`, `Ipv6Addr`, `SocketAddrV4` and `SocketAddrV6`. The standard library no longer implements these as the corresponding `libc` structs (`sockaddr_in`, `sockaddr_in6` etc.). This internal representation was never exposed, but some crates relied on it anyway by unsafely transmuting. This change will cause those crates to make invalid memory accesses. Notably `net2 <0.2.36`, `socket2 <0.3.16`, `mio <0.7.6`, `miow <0.3.6` and a few other crates are affected. All known affected crates have been patched and have had fixed versions published over a year ago. If any affected crate is still in your dependency tree, you need to upgrade them before using this version of Rust.
