compiler: Directly use rustc_abi almost everywhere
Use rustc_abi instead of rustc_target where applicable. This is mostly described by the following substitutions:
```rust
match path_substring {
rustc_target::spec::abi::Abi => rustc_abi::ExternAbi,
rustc_target::abi::call => rustc_target::callconv,
rustc_target::abi => rustc_abi,
}
```
A number of spot-fixes make that not quite the whole story.
The main exception is in 33edc68 where I get a lot more persnickety about how things are imported, especially in `rustc_middle::ty::layout`, not just from where. This includes putting an end to a reexport of `rustc_middle::ty::ReprOptions`, for the same reason that the rest of this change is happening: reexports mostly confound things.
This notably omits rustc_passes and the ast crates, as I'm still examining a question I have about how they do stability checking of `extern "Abi"` strings and if I can simplify their logic. The rustc_abi and rustc_target crates also go untouched because they will be entangled in that cleanup.
r? compiler-errors
Some where clause lowering simplifications
Rename `PredicateFilter::SelfThatDefines` to `PredicateFilter::SelfTraitThatDefines` to make it clear that it's only concerned with converting *traits*, and make it do a bit less work when converting bounds.
Also, make the predicate filter matching in `probe_ty_param_bounds_in_generics` explicit, and simply the args it receives a bit.
Fix validation when lowering `?` trait bounds
Pass the unlowered (`rustc_hir`) polarity to `lower_poly_trait_ref`.
This allows us to actually *validate* that generic args are actually valid on `?Trait` paths. This actually regressed in #113671 because that PR changed the behavior where we were inadvertently re-lowering paths as `BoundPolarity::Positive`, which was also coincidentally the only place we were enforcing the generics on `?Trait` paths were correct.
Try to point out when edition 2024 lifetime capture rules cause borrowck issues
Lifetime capture rules in 2024 are modified to capture more lifetimes, which sometimes lead to some non-local borrowck errors. This PR attempts to link these back together with a useful note pointing out the capture rule changes.
This is not a blocking concern, but I'd appreciate feedback (though, again, I'd like to stress that I don't want to block this PR on this): I'm worried about this note drowning in the sea of other diagnostics that borrowck emits. I was tempted to change the level of the note to `.span_warn` just so it would show up in a different color. Thoughts?
Fixes#130545
Opening as a draft first since it's stacked on #131183.
r? `@ghost`
Make sure `type_param_predicates` resolves correctly for RPITIT
After #132194, we end up lowering the item bounds for an RPITIT in an `ItemCtxt` whose def id is the *synthetic GAT*, not the opaque type from the HIR.
This means that when we're resolving a shorthand projection like `T::Assoc`, we call the `type_param_predicates` function with the `item_def_id` of the *GAT* and not the opaque. That function operates on the HIR, and is not designed to work with the `Node::Synthetic` that gets fed for items synthesized by the compiler...
This PR reuses the trick we use elsewhere in lowering, where we intercept whether an item comes from RPITIT lowering, and forwards the query off to the correct item.
Fixes#132372
Remap impl-trait lifetimes on HIR instead of AST lowering
Current AST->HIR lowering goes out of its way to remap lifetimes for opaque types. This is complicated and leaks into upstream and downstream code.
This PR stops trying to be clever during lowering, and prefers to do this remapping during the HIR->ty lowering. The remapping computation easily fits into the bound var resolution code. Its result can be used in by `generics_of` and `hir_ty_lowering::new_opaque` to add the proper parameters and arguments.
See an example on the doc for query `opaque_captured_lifetimes`.
Based on https://github.com/rust-lang/rust/pull/129244/
Fixes https://github.com/rust-lang/rust/issues/125249
Fixes https://github.com/rust-lang/rust/issues/126850
cc `@compiler-errors` `@spastorino`
r? `@petrochenkov`
The RFC for arbitrary self types v2 declares that we should reject
"generic" self types. This commit does so.
The definition of "generic" was unclear in the RFC, but has been
explored in
https://github.com/rust-lang/rust/issues/129147
and the conclusion is that "generic" means any `self` type which
is a type parameter defined on the method itself, or references
to such a type.
This approach was chosen because other definitions of "generic"
don't work. Specifically,
* we can't filter out generic type _arguments_, because that would
filter out Rc<Self> and all the other types of smart pointer
we want to support;
* we can't filter out all type params, because Self itself is a
type param, and because existing Rust code depends on other
type params declared on the type (as opposed to the method).
This PR decides to make a new error code for this case, instead of
reusing the existing E0307 error. This makes the code a
bit more complex, but it seems we have an opportunity to provide
specific diagnostics for this case so we should do so.
This PR filters out generic self types whether or not the
'arbitrary self types' feature is enabled. However, it's believed
that it can't have any effect on code which uses stable Rust, since
there are no stable traits which can be used to indicate a valid
generic receiver type, and thus it would have been impossible to
write code which could trigger this new error case.
It is however possible that this could break existing code which
uses either of the unstable `arbitrary_self_types` or
`receiver_trait` features. This breakage is intentional; as
we move arbitrary self types towards stabilization we don't want
to continue to support generic such types.
This PR adds lots of extra tests to arbitrary-self-from-method-substs.
Most of these are ways to trigger a "type mismatch" error which
9b82580c73/compiler/rustc_hir_typeck/src/method/confirm.rs (L519)
hopes can be minimized by filtering out generics in this way.
We remove a FIXME from confirm.rs suggesting that we make this change.
It's still possible to cause type mismatch errors, and a subsequent
PR may be able to improve diagnostics in this area, but it's harder
to cause these errors without contrived uses of the turbofish.
This is a part of the arbitrary self types v2 project,
https://github.com/rust-lang/rfcs/pull/3519https://github.com/rust-lang/rust/issues/44874
r? @wesleywiser
TypingMode: merge intercrate, reveal, and defining_opaque_types
This adds `TypingMode` and uses it in most places. We do not yet remove `Reveal` from `param_env`s. This and other future work as tracked in #132279 and via `FIXME`s.
Fetching the `TypingMode` of the `InferCtxt` asserts that the `TypingMode` agrees with `ParamEnv::reveal` to make sure we don't introduce any subtle bugs here. This will be unnecessary once `ParamEnv::reveal` no longer exists.
As the `TypingMode` is now a part of the query input, I've merged the coherence and non-coherence caches for the new solver. I've also enabled the local `infcx` cache during coherence by clearing the cache when forking it with a different `TypingMode`.
#### `TypingMode::from_param_env`
I am using this even in cases where I know that the `param_env` will always be `Reveal::UserFacing`. This is to make it easier to correctly refactor this code in the future, any time we use `Reveal::UserFacing` in a body while not defining its opaque types is incorrect and should use a `TypingMode` which only reveals opaques defined by that body instead, cc #124598
r? ``@compiler-errors``
Collect item bounds for RPITITs from trait where clauses just like associated types
We collect item bounds from trait where clauses for *associated types*, i.e. this:
```rust
trait Foo
where
Self::Assoc: Send
{
type Assoc;
}
```
Becomes this:
```rust
trait Foo {
type Assoc: Send;
}
```
Today, with RPITITs/AFIT and return-type notation, we don't do that, i.e.:
```rust
trait Foo where Self::method(..): Send {
fn method() -> impl Sized;
}
fn is_send(_: impl Send) {}
fn test<T: Foo>() {
is_send(T::method());
}
```
...which fails on nightly today.
Turns out it's super easy to fix this, and we just need to use the `associated_type_bounds` lowering function in `explicit_item_bounds_with_filter`, which has that logic baked in.
Hack out effects support for old solver
Opening this for vibes ✨
Turns out that a basic, somewhat incomplete implementation of host effects is achievable in the old trait solver pretty easily. This should be sufficient for us to use in the standard library itself.
Regarding incompleteness, maybe we should always treat host predicates as ambiguous in intercrate mode (at least in the old solver) to avoid any worries about accidental impl overlap or something.
r? ```@lcnr``` cc ```@fee1-dead```
Add `LayoutS::is_uninhabited` and use it
Use accessors for the things that accessors are good at: reducing everyone's need to be nosy and peek at the internals of every data structure.
compiler: Add rustc_abi dependence to the compiler
Depend on rustc_abi in compiler crates that use it indirectly but have not yet taken on that dependency, and are not *significantly* entangled in my other PRs. This leaves an "excise rustc_target" step after the dust settles.
Remove `ObligationCause::span()` method
I think it's an incredibly confusing footgun to expose both `obligation_cause.span` and `obligation_cause.span()`. Especially because `ObligationCause::span()` (the method) seems to just be hacking around a single quirk in the way we set up obligation causes for match arms.
First commit removes the need for that hack, with only one diagnostic span changing (but IMO not really getting worse -- I'd argue that it was already confusing).
Depend on rustc_abi in compiler crates that use it indirectly but have
not yet taken on that dependency, and are not entangled in my other PRs.
This leaves an "excise rustc_target" step after the dust settles.
Cleanup: Move an impl-Trait check from AST validation to AST lowering
Namely the one that rejects `impl Trait` in qself types and non-final path segments.
There's no good reason to perform this during AST validation.
We have better infrastructure in place in the AST lowerer (`ImplTraitContext`).
This shaves off a lot of code.
We now lower `impl Trait` in bad positions to `{type error}` which allows us to
remove a special case from HIR ty lowering.
Coincidentally fixes#126725. Well, it only *masks* it by passing `{type error}` to HIR analysis instead of a "bad" opaque. I was able to find a new reproducer for it. See the issue.
Simplify param handling in `resolve_bound_vars`
I always found the flow of the `ResolvedArg` constructors to be a bit confusing; turns out they're also kinda redundantly passing around their data, too.
Also, deduplicate some code handling early-bound var to late-bound var conversion between return type notation's two styles: `where <T as Trait>::method(..): Bound` and `where T: Trait<method(..): Bound>`.
Effects cleanup
- removed extra bits from predicates queries that are no longer needed in the new system
- removed the need for `non_erasable_generics` to take in tcx and DefId, removed unused arguments in callers
r? compiler-errors
- removed extra bits from predicates queries that are no longer needed in the new system
- removed the need for `non_erasable_generics` to take in tcx and DefId, removed unused arguments in callers
