Try fast_reject::simplify_type in coherence before doing full check
This is a reattempt at landing #69010 (by `@jonas-schievink).` The change adds a fast path for coherence checking to see if there's no way for types to unify since full coherence checking can be somewhat expensive.
This has big effects on code generated by the [`windows`](https://github.com/microsoft/windows-rs) which in some cases spends as much as 20% of compilation time in the `specialization_graph_of` query. In local benchmarks this took a compilation that previously took ~500 seconds down to ~380 seconds.
This is surely not going to make a difference on much smaller crates, so the question is whether it will have a negative impact. #69010 was closed because some of the perf suite crates did show small regressions.
Additional discussion of this issue is happening [here](https://rust-lang.zulipchat.com/#narrow/stream/247081-t-compiler.2Fperformance/topic/windows-rs.20perf).
Rename HIR UnOp variants
This renames the variants in HIR UnOp from
enum UnOp {
UnDeref,
UnNot,
UnNeg,
}
to
enum UnOp {
Deref,
Not,
Neg,
}
Motivations:
- This is more consistent with the rest of the code base where most enum
variants don't have a prefix.
- These variants are never used without the `UnOp` prefix so the extra
`Un` prefix doesn't help with readability. E.g. we don't have any
`UnDeref`s in the code, we only have `UnOp::UnDeref`.
- MIR `UnOp` type variants don't have a prefix so this is more
consistent with MIR types.
- "un" prefix reads like "inverse" or "reverse", so as a beginner in
rustc code base when I see "UnDeref" what comes to my mind is
something like `&*` instead of just `*`.
This renames the variants in HIR UnOp from
enum UnOp {
UnDeref,
UnNot,
UnNeg,
}
to
enum UnOp {
Deref,
Not,
Neg,
}
Motivations:
- This is more consistent with the rest of the code base where most enum
variants don't have a prefix.
- These variants are never used without the `UnOp` prefix so the extra
`Un` prefix doesn't help with readability. E.g. we don't have any
`UnDeref`s in the code, we only have `UnOp::UnDeref`.
- MIR `UnOp` type variants don't have a prefix so this is more
consistent with MIR types.
- "un" prefix reads like "inverse" or "reverse", so as a beginner in
rustc code base when I see "UnDeref" what comes to my mind is
something like "&*" instead of just "*".
Rollup of 11 pull requests
Successful merges:
- #72209 (Add checking for no_mangle to unsafe_code lint)
- #80732 (Allow Trait inheritance with cycles on associated types take 2)
- #81697 (Add "every" as a doc alias for "all".)
- #81826 (Prefer match over combinators to make some Box methods inlineable)
- #81834 (Resolve typedef in HashMap lldb pretty-printer only if possible)
- #81841 ([rustbuild] Output rustdoc-json-types docs )
- #81849 (Expand the docs for ops::ControlFlow a bit)
- #81876 (parser: Fix panic in 'const impl' recovery)
- #81882 (⬆️ rust-analyzer)
- #81888 (Fix pretty printer macro_rules with semicolon.)
- #81896 (Remove outdated comment in windows' mutex.rs)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Allow Trait inheritance with cycles on associated types take 2
This reverts the revert of #79209 and fixes the ICEs that's occasioned by that PR exposing some problems that are addressed in #80648 and #79811.
For easier review I'd say, check only the last commit, the first one is just a revert of the revert of #79209 which was already approved.
This also could be considered part or the actual fix of #79560 but I guess for that to be closed and fixed completely we would need to land #80648 and #79811 too.
r? `@nikomatsakis`
cc `@Aaron1011`
Improve SIMD type element count validation
Resolvesrust-lang/stdsimd#53.
These changes are motivated by `stdsimd` moving in the direction of const generic vectors, e.g.:
```rust
#[repr(simd)]
struct SimdF32<const N: usize>([f32; N]);
```
This makes a few changes:
* Establishes a maximum SIMD lane count of 2^16 (65536). This value is arbitrary, but attempts to validate lane count before hitting potential errors in the backend. It's not clear what LLVM's maximum lane count is, but cranelift's appears to be much less than `usize::MAX`, at least.
* Expands some SIMD intrinsics to support arbitrary lane counts. This resolves the ICE in the linked issue.
* Attempts to catch invalid-sized vectors during typeck when possible.
Unresolved questions:
* Generic-length vectors can't be validated in typeck and are only validated after monomorphization while computing layout. This "works", but the errors simply bail out with no context beyond the name of the type. Should these errors instead return `LayoutError` or otherwise provide context in some way? As it stands, users of `stdsimd` could trivially produce monomorphization errors by making zero-length vectors.
cc `@bjorn3`
Add lint for `panic!(123)` which is not accepted in Rust 2021.
This extends the `panic_fmt` lint to warn for all cases where the first argument cannot be interpreted as a format string, as will happen in Rust 2021.
It suggests to add `"{}",` to format the message as a string. In the case of `std::panic!()`, it also suggests the recently stabilized
`std::panic::panic_any()` function as an alternative.
It renames the lint to `non_fmt_panic` to match the lint naming guidelines.
This is part of #80162.
r? ```@estebank```
introduce future-compatibility warning for forbidden lint groups
We used to ignore `forbid(group)` scenarios completely. This changed in #78864, but that led to a number of regressions (#80988, #81218).
This PR introduces a future compatibility warning for the case where a group is forbidden but then an individual lint within that group is allowed. We now issue a FCW when we see the "allow", but permit it to take effect.
r? ``@Mark-Simulacrum``
Add a new ABI to support cmse_nonsecure_call
This adds support for the `cmse_nonsecure_call` feature to be able to perform non-secure function call.
See the discussion on Zulip [here](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Support.20for.20callsite.20attributes/near/223054928).
This is a followup to #75810 which added `cmse_nonsecure_entry`. As for that PR, I assume that the changes are small enough to not have to go through a RFC but I don't mind doing one if needed 😃
I did not yet create a tracking issue, but if most of it is fine, I can create one and update the various files accordingly (they refer to the other tracking issue now).
On the Zulip chat, I believe `@jonas-schievink` volunteered to be a reviewer 💯
We used to ignore `forbid(group)` scenarios completely. This changed
in #78864, but that led to a number of regressions (#80988, #81218).
This PR introduces a future compatibility warning for the case where
a group is forbidden but then an individual lint within that group
is allowed. We now issue a FCW when we see the "allow", but permit
it to take effect.
Upgrade Chalk
~~Blocked on rust-lang/chalk#670~~
~~Now blocked on rust-lang/chalk#680 and release~~
In addition to the straight upgrade, I also tried to fix some tests by properly returning variables and max universes in the solution. Unfortunately, this actually triggers the same perf problem that rustc traits code runs into in `canonicalizer`. Not sure what the root cause of this problem is, or why it's supposed to be solved in chalk.
r? ```@nikomatsakis```
This commit adds a new ABI to be selected via `extern
"C-cmse-nonsecure-call"` on function pointers in order for the compiler to
apply the corresponding cmse_nonsecure_call callsite attribute.
For Armv8-M targets supporting TrustZone-M, this will perform a
non-secure function call by saving, clearing and calling a non-secure
function pointer using the BLXNS instruction.
See the page on the unstable book for details.
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Remove the remains of query categories
Back in October 2020 in #77830 ``@cjgillot`` removed the query categories information from the profiler, but the actual definitions which query was in which category remained, although unused.
Here I clean that up, to simplify the query definitions even further.
It's unfortunate that this loses all the context for `git blame`, ~~but I'm working on moving those query definitions into `rustc_query_system`, which will lose that context anyway.~~ EDIT: Might not work out.
The functional changes are in the first commit. The second one only changes the indentation.
Add visitors for checking #[inline]
Add visitors for checking #[inline] with struct field
Fix test for #[inline]
Add visitors for checking #[inline] with #[macro_export] macro
Add visitors for checking #[inline] without #[macro_export] macro
Add use alias with Visitor
Fix lint error
Reduce unnecessary variable
Co-authored-by: LingMan <LingMan@users.noreply.github.com>
Change error to warning
Add warning for checking field, arm with #[allow_internal_unstable]
Add name resolver
Formatting
Formatting
Fix error fixture
Add checking field, arm, macro def
Remove const_in_array_repeat
Fixes#80371. Fixes#81315. Fixes#80767. Fixes#75682.
I thought there might be some issue with `Repeats(_, 0)`, but if you increase the items in the array it still ICEs. I'm not sure if this is the best fix but it does fix the given issue.
2229: Fix issues with move closures and mutability
This PR fixes two issues when feature `capture_disjoint_fields` is used.
1. Can't mutate using a mutable reference
2. Move closures try to move value out through a reference.
To do so, we
1. Compute the mutability of the capture and store it as part of the `CapturedPlace` that is written in TypeckResults
2. Restrict capture precision. Note this is temporary for now, to allow the feature to be used with move closures and ByValue captures and might change depending on discussions with the lang team.
- No Derefs are captured for ByValue captures, since that will result in value behind a reference getting moved.
- No projections are applied to raw pointers since these require unsafe blocks. We capture
them completely.
r? `````@nikomatsakis`````
Stabilize `unsigned_abs`
Resolves#74913.
This PR stabilizes the `i*::unsigned_abs()` method, which returns the absolute value of an integer _as its unsigned equivalent_. This has the advantage that it does not overflow on `i*::MIN`.
I have gone ahead and used this in a couple locations throughout the repository.
When `capture_disjoint_fields` is not enabled, checking if the root variable
binding is mutable would suffice.
However with the feature enabled, the captured place might be mutable
because it dereferences a mutable reference.
This PR computes the mutability of each capture after capture analysis
in rustc_typeck. We store this in `ty::CapturedPlace` and then use
`ty::CapturedPlace::mutability` in mir_build and borrow_check.
Refractor a few more types to `rustc_type_ir`
In the continuation of #79169, ~~blocked on that PR~~.
This PR:
- moves `IntVarValue`, `FloatVarValue`, `InferTy` (and friends) and `Variance`
- creates the `IntTy`, `UintTy` and `FloatTy` enums in `rustc_type_ir`, based on their `ast` and `chalk_ir` equilavents, and uses them for types in the rest of the compiler.
~~I will split up that commit to make this easier to review and to have a better commit history.~~
EDIT: done, I split the PR in commits of 200-ish lines each
r? `````@nikomatsakis````` cc `````@jackh726`````
Enforce that query results implement Debug
Currently, we require that query keys implement `Debug`, but we do not do the same for query values. This can make incremental compilation bugs difficult to debug - there isn't a good place to print out the result loaded from disk.
This PR adds `Debug` bounds to several query-related functions, allowing us to debug-print the query value when an 'unstable fingerprint' error occurs. This required adding `#[derive(Debug)]` to a fairly large number of types - hopefully, this doesn't have much of an impact on compiler bootstrapping times.
