Automatically taint InferCtxt when errors are emitted
r? `@nnethercote`
Basically `InferCtxt::dcx` now returns a `DiagCtxt` that refers back to the `Cell<Option<ErrorGuaranteed>>` of the `InferCtxt` and thus when invoking `Diag::emit`, and the diagnostic is an error, we taint the `InferCtxt` directly.
That change on its own has no effect at all, because `InferCtxt` already tracks whether errors have been emitted by recording the global error count when it gets opened, and checking at the end whether the count changed. So I removed that error count check, which had a bit of fallout that I immediately fixed by invoking `InferCtxt::dcx` instead of `TyCtxt::dcx` in a bunch of places.
The remaining new errors are because an error was reported in another query, and never bubbled up. I think they are minor enough for this to be ok, and sometimes it actually improves diagnostics, by not silencing useful diagnostics anymore.
fixes#126485 (cc `@olafes)`
There are more improvements we can do (like tainting in hir ty lowering), but I would rather do that in follow up PRs, because it requires some refactorings.
Don't suggest awaiting in closure patterns
Fixes#126903.
For
```rust
async fn do_async() {}
fn main() {
Some(do_async()).map(|()| {});
}
```
the error is now
```rust
error[E0308]: mismatched types
--> src/main.rs:4:27
|
4 | Some(do_async()).map(|()| {});
| ^^
| |
| expected future, found `()`
| expected due to this
|
= note: expected opaque type `impl Future<Output = ()>`
found unit type `()`
```
Ideally, if `main` were to be `async`, it should be
```rs
error[E0308]: mismatched types
--> src/main.rs:4:27
|
4 | Some(do_async()).map(|()| {});
| ^^
| |
| expected future, found `()`
| expected due to this
|
= note: expected opaque type `impl Future<Output = ()>`
found unit type `()`
help: consider `await`ing on the `Future`
|
4 | Some(do_async().await).map(|()| {});
| ++++++
```
However, this would mean `FnCtx::check_pat_top` would have to be called with an `origin_expr` in `rustc_hir_typeck::check::check_fn`, and that expr would have to be somehow plumbed through `FnCtxt::check_expr_closure` and closure signature deduction. I'm willing to work on the plumbing but unsure how to start.
Most modules have such a blank line, but some don't. Inserting the blank
line makes it clearer that the `//!` comments are describing the entire
module, rather than the `use` declaration(s) that immediately follows.
Uplift next trait solver to `rustc_next_trait_solver`
🎉
There's so many FIXMEs! Sorry! Ideally this merges with the FIXMEs and we track and squash them over the near future.
Also, this still doesn't build on anything other than rustc. I still need to fix `feature = "nightly"` in `rustc_type_ir`, and remove and fix all the nightly feature usage in the new trait solver (notably: let-chains).
Also, sorry `@lcnr` I know you asked for me to separate the commit where we `mv rustc_trait_selection/solve/... rustc_next_trait_solver/solve/...`, but I had already done all the work by that point. Luckily, `git` understands the file moves so it should still be relatively reviewable.
If this is still very difficult to review, then I can do some rebasing magic to try to separate this out. Please let me know!
r? lcnr
Introduce `{IndexNewtype,SyntaxContext}::from_u16` for convenience because small indices are sometimes encoded as `u16`.
Use `SpanData::span` instead of `Span::new` where appropriate.
Add a clarifying comment about decoding span parents.
Make proof tree probing and `Candidate`/`CandidateSource` generic over interner
`<TyCtxt<'tcx>>` is ugly, but will become `<I>` when things actually become generic.
r? lcnr
Use `Variance` glob imported variants everywhere
Fully commit to using the globbed variance. Could be convinced the other way, and change this PR to not use the globbed variants anywhere, but I'd rather we do one or the other.
r? lcnr
Use `tidy` to sort crate attributes for all compiler crates.
We already do this for a number of crates, e.g. `rustc_middle`, `rustc_span`, `rustc_metadata`, `rustc_span`, `rustc_errors`.
For the ones we don't, in many cases the attributes are a mess.
- There is no consistency about order of attribute kinds (e.g. `allow`/`deny`/`feature`).
- Within attribute kind groups (e.g. the `feature` attributes), sometimes the order is alphabetical, and sometimes there is no particular order.
- Sometimes the attributes of a particular kind aren't even grouped all together, e.g. there might be a `feature`, then an `allow`, then another `feature`.
This commit extends the existing sorting to all compiler crates, increasing consistency. If any new attribute line is added there is now only one place it can go -- no need for arbitrary decisions.
Exceptions:
- `rustc_log`, `rustc_next_trait_solver` and `rustc_type_ir_macros`, because they have no crate attributes.
- `rustc_codegen_gcc`, because it's quasi-external to rustc (e.g. it's ignored in `rustfmt.toml`).
r? `@davidtwco`
We already do this for a number of crates, e.g. `rustc_middle`,
`rustc_span`, `rustc_metadata`, `rustc_span`, `rustc_errors`.
For the ones we don't, in many cases the attributes are a mess.
- There is no consistency about order of attribute kinds (e.g.
`allow`/`deny`/`feature`).
- Within attribute kind groups (e.g. the `feature` attributes),
sometimes the order is alphabetical, and sometimes there is no
particular order.
- Sometimes the attributes of a particular kind aren't even grouped
all together, e.g. there might be a `feature`, then an `allow`, then
another `feature`.
This commit extends the existing sorting to all compiler crates,
increasing consistency. If any new attribute line is added there is now
only one place it can go -- no need for arbitrary decisions.
Exceptions:
- `rustc_log`, `rustc_next_trait_solver` and `rustc_type_ir_macros`,
because they have no crate attributes.
- `rustc_codegen_gcc`, because it's quasi-external to rustc (e.g. it's
ignored in `rustfmt.toml`).
Avoid unwrap diag.code directly in note_and_explain_type_err
<!--
If this PR is related to an unstable feature or an otherwise tracked effort,
please link to the relevant tracking issue here. If you don't know of a related
tracking issue or there are none, feel free to ignore this.
This PR will get automatically assigned to a reviewer. In case you would like
a specific user to review your work, you can assign it to them by using
r? <reviewer name>
-->
Fixes#125757
Make `body_owned_by` return the `Body` instead of just the `BodyId`
fixes#125677
Almost all `body_owned_by` callers immediately called `body`, too, so just return `Body` directly.
This makes the inline-const query feeding more robust, as all calls to `body_owned_by` will now yield a body for inline consts, too.
I have not yet figured out a good way to make `tcx.hir().body()` return an inline-const body, but that can be done as a follow-up
Do not equate `Const`'s ty in `super_combine_const`
Fixes#114456
In #125451 we started relating the `Const`'s tys outside of a probe so it was no longer simply an assertion to catch bugs.
This was done so that when we _do_ provide a wrongly typed const argument to an item if we wind up relating it with some other instantiation we'll have a `TypeError` we can bubble up and taint the resulting mir allowing const eval to skip evaluation.
In this PR I instead change `ConstArgHasType` to correctly handle checking the types of const inference variables. Previously if we had something like `impl<const N: u32> Trait for [(); N]`, when using the impl we would instantiate it with infer vars and then check that `?x: u32` is of type `u32` and succeed. Then later we would infer `?x` to some `Const` of type `usize`.
We now stall on `?x` in `ConstArgHasType` until it has a concrete value that we can determine the type of. This allows us to fail using the erroneous implementation of `Trait` which allows us to taint the mir.
Long term we intend to remove the `ty` field on `Const` so we would have no way of accessing the `ty` of a const inference variable anyway and would have to do this. I did not fully update `ConstArgHasType` to avoid using the `ty` field as it's not entirely possible right now- we would need to lookup `ConstArgHasType` candidates in the env.
---
As for _why_ I think we should do this, relating the types of const's is not necessary for soundness of the type system. Originally this check started off as a plain `==` in `super_relate_consts` and gradually has been growing in complexity as we support more complicated types. It was never actually required to ensure that const arguments are correctly typed for their parameters however.
The way we currently check that a const argument has the correct type is a little convoluted and confusing (and will hopefully be less weird as time goes on). Every const argument has an anon const with its return type set to type of the const parameter it is an argument to. When type checking the anon const regular type checking rules require that the expression is the same type as the return type. This effectively ensure that no matter what every const argument _always_ has the correct type.
An extra bit of complexity is that during `hir_ty_lowering` we do not represent everything as a `ConstKind::Unevaluated` corresponding to the anon const. For generic parameters i.e. `[(); N]` we simply represent them as `ConstKind::Param` as we do not want `ConstKind::Unevaluated` with generic substs on stable under min const generics. The anon const still gets type checked resulting in errors about type mismatches.
Eventually we intend to not create anon consts for all const arguments (for example for `ConstKind::Param`) and instead check that the argument type is correct via `ConstArgHasType` obligations (these effectively also act as a check that the anon consts have the correctly set return type).
What this all means is that the the only time we should ever have mismatched types when relating two `Const`s is if we have messed up our logic for ensuring that const arguments are of the correct type. Having this not be an assert is:
- Confusing as it may incorrectly lead people to believe this is an important check that is actually required
- Opens the possibility for bugs or behaviour reliant on this (unnecessary) check existing
---
This PR makes two tests go from pass->ICE (`generic_const_exprs/ice-125520-layout-mismatch-mulwithoverflow.rs` and `tests/crashes/121858.rs`). This is caused by the fact that we evaluate anon consts even if their where clauses do not hold and is a pre-existing issue and only affects `generic_const_exprs`. I am comfortable exposing the brokenness of `generic_const_exprs` more with this PR
This PR makes a test go from ICE->pass (`const-generics/issues/issue-105821.rs`). I have no idea why this PR affects that but I believe that ICE is an unrelated issue to do with the fact that under `generic_const_exprs`/`adt_const_params` we do not handle lifetimes in const parameter types correctly. This PR is likely just masking this bug.
Note: this PR doesn't re-introduce the assertion that the two consts' tys are equal. I'm not really sure how I feel about this but tbh it has caused more ICEs than its found lately so 🤷♀️
r? `@oli-obk` `@compiler-errors`
Remove `DefId` from `EarlyParamRegion`
Currently we represent usages of `Region` parameters via the `ReEarlyParam` or `ReLateParam` variants. The `ReEarlyParam` is effectively equivalent to `TyKind::Param` and `ConstKind::Param` (i.e. it stores a `Symbol` and a `u32` index) however it also stores a `DefId` for the definition of the lifetime parameter.
This was used in roughly two places:
- Borrowck diagnostics instead of threading the appropriate `body_id` down to relevant locations. Interestingly there were already some places that had to pass down a `DefId` manually.
- Some opaque type checking logic was using the `DefId` field to track captured lifetimes
I've split this PR up into a commit for generate rote changes to diagnostics code to pass around a `DefId` manually everywhere, and another commit for the opaque type related changes which likely require more careful review as they might change the semantics of lints/errors.
Instead of manually passing the `DefId` around everywhere I previously tried to bundle it in with `TypeErrCtxt` but ran into issues with some call sites of `infcx.err_ctxt` being unable to provide a `DefId`, particularly places involved with trait solving and normalization. It might be worth investigating adding some new wrapper type to pass this around everywhere but I think this might be acceptable for now.
This pr also has the effect of reducing the size of `EarlyParamRegion` from 16 bytes -> 8 bytes. I wouldn't expect this to have any direct performance improvement however, other variants of `RegionKind` over `8` bytes are all because they contain a `BoundRegionKind` which is, as far as I know, mostly there for diagnostics. If we're ever able to remove this it would shrink the `RegionKind` type from `24` bytes to `12` (and with clever bit packing we might be able to get it to `8` bytes). I am curious what the performance impact would be of removing interning of `Region`'s if we ever manage to shrink `RegionKind` that much.
Sidenote: by removing the `DefId` the `Debug` output for `Region` has gotten significantly nicer. As an example see this opaque type debug print before vs after this PR:
`Opaque(DefId(0:13 ~ impl_trait_captures[aeb9]::foo::{opaque#0}), [DefId(0:9 ~ impl_trait_captures[aeb9]::foo::'a)_'a/#0, T, DefId(0:9 ~ impl_trait_captures[aeb9]::foo::'a)_'a/#0])`
`Opaque(DefId(0:13 ~ impl_trait_captures[aeb9]::foo::{opaque#0}), ['a/#0, T, 'a/#0])`
r? `@compiler-errors` (I would like someone who understands the opaque type setup to atleast review the type system commit, but the rest is likely reviewable by anyone)
Fail relating constants of different types
fixes#121585fixes#121858fixes#124151
I gave this several attempts before, but we lost too many important diagnostics until I managed to make compilation never bail out early. We have reached this point, so now we can finally fix all those ICEs by bubbling up an error instead of continueing when we encounter a bug.
Warn (or error) when `Self` ctor from outer item is referenced in inner nested item
This implements a warning `SELF_CONSTRUCTOR_FROM_OUTER_ITEM` when a self constructor from an outer impl is referenced in an inner nested item. This is a proper fix mentioned https://github.com/rust-lang/rust/pull/117246#discussion_r1374648388.
This warning is additionally bumped to a hard error when the self type references generic parameters, since it's almost always going to ICE, and is basically *never* correct to do.
This also reverts part of https://github.com/rust-lang/rust/pull/117246, since I believe this is the proper fix and we shouldn't need the helper functions (`opt_param_at`/`opt_type_param`) any longer, since they shouldn't really ever be used in cases where we don't have this problem.
Cleanup: Fix up some diagnostics
Several diagnostics contained their error code inside their primary message which is no bueno.
This PR moves them out of the message and turns them into structured error codes.
Also fixes another occurrence of `->` after a selector in a Fluent message which is not correct. I've fixed two other instances of this issue in #104345 (2022) but didn't update all instances as I've noted here: https://github.com/rust-lang/rust/pull/104345#issuecomment-1312705977 (“the future is now!”).
Uplift `RegionVid`, `TermKind` to `rustc_type_ir`, and `EagerResolver` to `rustc_next_trait_solver`
- Uplift `RegionVid`. This was complicated due to the fact that we implement `polonius_engine::Atom` for `RegionVid` -- but I just separated that into `PoloniusRegionVid`, and added `From`/`Into` impls so it can be defined in `rustc_borrowck` separately. Coherence 😵
- Change `InferCtxtLike` to expose `opportunistically_resolve_{ty,ct,lt,int,float}_var` so that we can uplift `EagerResolver` for use in the canonicalization methods.
- Uplift `TermKind` much like `GenericArgKind`
All of this is miscellaneous dependencies for making more `EvalCtxt` methods generic.
Suggest setting lifetime in borrowck error involving types with elided lifetimes
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-both-are-structs-2.rs:7:5
|
LL | fn foo(mut x: Ref, y: Ref) {
| ----- - has type `Ref<'_, '1>`
| |
| has type `Ref<'_, '2>`
LL | x.b = y.b;
| ^^^^^^^^^ assignment requires that `'1` must outlive `'2`
|
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'a, 'a>, y: Ref<'a, 'a>) {
| ++++ ++++++++ ++++++++
```
As can be seen above, it currently doesn't try to compare the `ty::Ty` lifetimes that diverged vs the `hir::Ty` to correctly suggest the following
```
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'_, 'a>, y: Ref<'_, 'a>) {
| ++++ ++++++++ ++++++++
```
but I believe this to still be an improvement over the status quo.
Fix#40990.
Uplift more query stuff
- Uplift various query input/response internals
- Uplift the `ProofTree` structures and make the `ProofTreeBuilder` stuff (mostly) generic over `Interner`
- Stop using `TyCtxt::def_kind` in favor of `AliasTerm::kind`
r? lcnr
Rename Unsafe to Safety
Alternative to #124455, which is to just have one Safety enum to use everywhere, this opens the posibility of adding `ast::Safety::Safe` that's useful for unsafe extern blocks.
This leaves us today with:
```rust
enum ast::Safety {
Unsafe(Span),
Default,
// Safe (going to be added for unsafe extern blocks)
}
enum hir::Safety {
Unsafe,
Safe,
}
```
We would convert from `ast::Safety::Default` into the right Safety level according the context.
Do not suggest constraining the `&self` param, but rather the return type.
If that is wrong (because it is not sufficient), a follow up error will tell the
user to fix it. This way we lower the chances of *over* constraining, but still
get the cake of "correctly" contrained in two steps.
This is a correct suggestion:
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-return-type-is-anon.rs:9:9
|
LL | fn foo<'a>(&self, x: &i32) -> &i32 {
| - - let's call the lifetime of this reference `'1`
| |
| let's call the lifetime of this reference `'2`
LL | x
| ^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
LL | fn foo<'a>(&self, x: &'a i32) -> &'a i32 {
| ++ ++
```
While this is incomplete because it should suggestino `&'a self`
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-self-is-anon.rs:7:19
|
LL | fn foo<'a>(&self, x: &Foo) -> &Foo {
| - - let's call the lifetime of this reference `'1`
| |
| let's call the lifetime of this reference `'2`
LL | if true { x } else { self }
| ^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
LL | fn foo<'a>(&self, x: &'a Foo) -> &'a Foo {
| ++ ++
```
but the follow up error is
```
error: lifetime may not live long enough
--> tests/ui/lifetimes/lifetime-errors/ex3-both-anon-regions-self-is-anon.rs:7:30
|
6 | fn foo<'a>(&self, x: &'a Foo) -> &'a Foo {
| -- - let's call the lifetime of this reference `'1`
| |
| lifetime `'a` defined here
7 | if true { x } else { self }
| ^^^^ method was supposed to return data with lifetime `'a` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
6 | fn foo<'a>(&'a self, x: &'a Foo) -> &'a Foo {
| ++
```
```
error: lifetime may not live long enough
--> $DIR/lt-ref-self.rs:12:9
|
LL | fn ref_self(&self, f: &u32) -> &u32 {
| - - let's call the lifetime of this reference `'1`
| |
| let's call the lifetime of this reference `'2`
LL | f
| ^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
LL | fn ref_self<'b>(&'b self, f: &'b u32) -> &'b u32 {
| ++++ ++ ++ ++
```
```
error: lifetime may not live long enough
--> f205.rs:8:16
|
7 | fn resolve_symbolic_reference(&self, reference: Option<Reference>) -> Option<Reference> {
| - --------- has type `Option<Reference<'1>>`
| |
| let's call the lifetime of this reference `'2`
8 | return reference;
| ^^^^^^^^^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter
|
7 | fn resolve_symbolic_reference<'a>(&'a self, reference: Option<Reference<'a>>) -> Option<Reference<'a>> {
| ++++ ++ ++++ ++++
```
The correct suggestion would be
```
help: consider introducing a named lifetime parameter
|
7 | fn resolve_symbolic_reference<'a>(&self, reference: Option<Reference<'a>>) -> Option<Reference<'a>> {
| ++++ ++++ ++++
```
but we are not doing the analysis to detect that yet. If we constrain `&'a self`, then the return type with a borrow will implicitly take its lifetime from `'a`, it is better to make it explicit in the suggestion, in case that `&self` *doesn't* need to be `'a`, but the return does.
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-both-are-structs-2.rs:7:5
|
LL | fn foo(mut x: Ref, y: Ref) {
| ----- - has type `Ref<'_, '1>`
| |
| has type `Ref<'_, '2>`
LL | x.b = y.b;
| ^^^^^^^^^ assignment requires that `'1` must outlive `'2`
|
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'a, 'a>, y: Ref<'a, 'a>) {
| ++++ ++++++++ ++++++++
```
As can be seen above, it currently doesn't try to compare the `ty::Ty` lifetimes that diverged vs the `hir::Ty` to correctly suggest the following
```
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'_, 'a>, y: Ref<'_, 'a>) {
| ++++ ++++++++ ++++++++
```
but I believe this to still be an improvement over the status quo.
CC #40990.
Split out `ty::AliasTerm` from `ty::AliasTy`
Splitting out `AliasTerm` (for use in project and normalizes goals) and `AliasTy` (for use in `ty::Alias`)
r? lcnr
`InferCtxt::next_{ty,const}_var*` all take an origin, but the
`param_def_id` is almost always `None`. This commit changes them to just
take a `Span` and build the origin within the method, and adds new
methods for the rare cases where `param_def_id` might not be `None`.
This avoids a lot of tedious origin building.
Specifically:
- next_ty_var{,_id_in_universe,_in_universe}: now take `Span` instead of
`TypeVariableOrigin`
- next_ty_var_with_origin: added
- next_const_var{,_in_universe}: takes Span instead of ConstVariableOrigin
- next_const_var_with_origin: added
- next_region_var, next_region_var_in_universe: these are unchanged,
still take RegionVariableOrigin
The API inconsistency (ty/const vs region) seems worth it for the
large conciseness improvements.
`InferCtxt::next_{ty,const,int,float}_var_id` each have a single call
site, in `InferCtt::next_{ty,const,int,float}_var` respectively.
The only remaining method that creates a var_id is
`InferCtxt::next_ty_var_id_in_universe`, which has one use outside the
crate.
The comment mentions that `ReBound` and `ReVar` aren't expected here.
Experimentation with the full test suite indicates this is true, and
that `ReErased` also doesn't occur. So the commit introduces `bug!` for
those cases. (If any of them show up later on, at least we'll have a
test case.)
The commit also remove the first sentence in the comment.
`RePlaceholder` is now handled in the match arm above this comment and
nothing is printed for it, so that sentence is just wrong. Furthermore,
issue #13998 was closed some time ago.
fix normalizing in different `ParamEnv`s with the same `InferCtxt`
This PR changes the key of the projection cache from just `AliasTy` to `(AliasTy, ParamEnv)` to allow normalizing in different `ParamEnv`s without resetting caches. Previously, normalizing the same alias in different param envs would always reuse the cached result from the first normalization, which is incorrect if the projection clauses in the param env have changed.
Fixing this bug allows us to get rid of `InferCtxt::clear_caches`, which was only used by the `AutoTraitFinder`, because it requires normalizing in different param envs.
r? `@fmease`
Subtype predicates only exist on inference types, so we can allow them to register opaque types within them.
We were unable to come up with an example where this could be reached (subtype predicates with either side not being an infer var gets consumed during any `select_where_possible` invocation, of which we have a lot in typeck). To ensure we don't silently accept new behaviour in case we missed a situation where this could occur, I have added an assert that prevents opaque types from having their hidden type constrained.
r? `@compiler-errors`
Implement syntax for `impl Trait` to specify its captures explicitly (`feature(precise_capturing)`)
Implements `impl use<'a, 'b, T, U> Sized` syntax that allows users to explicitly list the captured parameters for an opaque, rather than inferring it from the opaque's bounds (or capturing *all* lifetimes under 2024-edition capture rules). This allows us to exclude some implicit captures, so this syntax may be used as a migration strategy for changes due to #117587.
We represent this list of captured params as `PreciseCapturingArg` in AST and HIR, resolving them between `rustc_resolve` and `resolve_bound_vars`. Later on, we validate that the opaques only capture the parameters in this list.
We artificially limit the feature to *require* mentioning all type and const parameters, since we don't currently have support for non-lifetime bivariant generics. This can be relaxed in the future.
We also may need to limit this to require naming *all* lifetime parameters for RPITIT, since GATs have no variance. I have to investigate this. This can also be relaxed in the future.
r? `@oli-obk`
Tracking issue:
- https://github.com/rust-lang/rust/issues/123432
Remove `TypeVariableOriginKind` and `ConstVariableOriginKind`
It's annoying to have to import `TypeVariableOriginKind` just to fill it with `MiscVariable` for almost every use. Every other usage other than `TypeParameterDefinition` wasn't even used -- I can see how it may have been useful once for debugging, but I do quite a lot of typeck debugging and I've never really needed it.
So let's just remove it, and keep around the only useful thing which is the `DefId` of the param for `var_for_def`.
This is based on #123006, which removed the special use of `TypeVariableOriginKind::OpaqueInference`, which I'm pretty sure I was the one that added.
r? lcnr or re-roll to types
