Remove some unused ordering derivations based on `DefId`
Like #93018, this removes some unused/unneeded ordering derivations as part of ongoing work on #90317. Here, these changes are aimed at making https://github.com/rust-lang/rust/pull/90749 easier to review, test, and merge.
r? `@cjgillot`
Formally implement let chains
## Let chains
My longest and hardest contribution since #64010.
Thanks to `@Centril` for creating the RFC and special thanks to `@matthewjasper` for helping me since the beginning of this journey. In fact, `@matthewjasper` did much of the complicated MIR stuff so it's true to say that this feature wouldn't be possible without him. Thanks again `@matthewjasper!`
With the changes proposed in this PR, it will be possible to chain let expressions along side local variable declarations or ordinary conditional expressions. In other words, do much of what the `if_chain` crate already does.
## Other considerations
* `if let guard` and `let ... else` features need special care and should be handled in a following PR.
* Irrefutable patterns are allowed within a let chain context
* ~~Three Clippy lints were already converted to start dogfooding and help detect possible corner cases~~
cc #53667
Directly use ConstValue for single literals in blocks
Addresses the minimal repro in https://github.com/rust-lang/rust/issues/92186, but doesn't fix the underlying problem (which would be solved by solving the anon subst problem afaict).
I do, however, think that it makes sense in general to treat single literals in anon blocks as const values directly, especially in light of the problem that the issue refers to (anon const evaluation being postponed until infer variables in substs can be resolved, which was introduced by https://github.com/rust-lang/rust/pull/90023), i.e. while we do get warnings for those unnecessary braces, we should try to avoid errors caused by those braces if possible.
Fix ICEs related to `Deref<Target=[T; N]>` on newtypes
1. Stash a const infer's type into the canonical var during canonicalization, so we can recreate the fresh const infer with that same type.
For example, given `[T; _]` we know `_` is a `usize`. If we go from infer => canonical => infer, we shouldn't forget that variable is a usize.
Fixes#92626Fixes#83704
2. Don't stash the autoderef'd slice type that we get from method lookup, but instead recreate it during method confirmation. We need to do this because the type we receive back after picking the method references a type variable that does not exist after probing is done.
Fixes#92637
... A better solution for the second issue would be to actually _properly_ implement `Deref` for `[T; N]` instead of fixing this autoderef hack to stop leaking inference variables. But I actually looked into this, and there are many complications with const impls.
Replace use of `ty()` on term and use it in more places. This will allow more flexibility in the
future, but slightly worried it allows items which are consts which only accept types.
Implement `#[rustc_must_implement_one_of]` attribute
This PR adds a new attribute — `#[rustc_must_implement_one_of]` that allows changing the "minimal complete definition" of a trait. It's similar to GHC's minimal `{-# MINIMAL #-}` pragma, though `#[rustc_must_implement_one_of]` is weaker atm.
Such attribute was long wanted. It can be, for example, used in `Read` trait to make transitions to recently added `read_buf` easier:
```rust
#[rustc_must_implement_one_of(read, read_buf)]
pub trait Read {
fn read(&mut self, buf: &mut [u8]) -> Result<usize> {
let mut buf = ReadBuf::new(buf);
self.read_buf(&mut buf)?;
Ok(buf.filled_len())
}
fn read_buf(&mut self, buf: &mut ReadBuf<'_>) -> Result<()> {
default_read_buf(|b| self.read(b), buf)
}
}
impl Read for Ty0 {}
//^ This will fail to compile even though all `Read` methods have default implementations
// Both of these will compile just fine
impl Read for Ty1 {
fn read(&mut self, buf: &mut [u8]) -> Result<usize> { /* ... */ }
}
impl Read for Ty2 {
fn read_buf(&mut self, buf: &mut ReadBuf<'_>) -> Result<()> { /* ... */ }
}
```
For now, this is implemented as an internal attribute to start experimenting on the design of this feature. In the future we may want to extend it:
- Allow arbitrary requirements like `a | (b & c)`
- Allow multiple requirements like
- ```rust
#[rustc_must_implement_one_of(a, b)]
#[rustc_must_implement_one_of(c, d)]
```
- Make it appear in rustdoc documentation
- Change the syntax?
- Etc
Eventually, we should make an RFC and make this (or rather similar) attribute public.
---
I'm fairly new to compiler development and not at all sure if the implementation makes sense, but at least it passes tests :)
ProjectionPredicate should be able to handle both associated types and consts so this adds the
first step of that. It mainly just pipes types all the way down, not entirely sure how to handle
consts, but hopefully that'll come with time.
Replace `NestedVisitorMap` with generic `NestedFilter`
This is an attempt to make the `intravisit::Visitor` API simpler and "more const" with regard to nested visiting.
With this change, `intravisit::Visitor` does not visit nested things by default, unless you specify `type NestedFilter = nested_filter::OnlyBodies` (or `All`). `nested_visit_map` returns `Self::Map` instead of `NestedVisitorMap<Self::Map>`. It panics by default (unreachable if `type NestedFilter` is omitted).
One somewhat trixty thing here is that `nested_filter::{OnlyBodies, All}` live in `rustc_middle` so that they may have `type Map = map::Map` and so that `impl Visitor`s never need to specify `type Map` - it has a default of `Self::NestedFilter::Map`.
Remove deprecated LLVM-style inline assembly
The `llvm_asm!` was deprecated back in #87590 1.56.0, with intention to remove
it once `asm!` was stabilized, which already happened in #91728 1.59.0. Now it
is time to remove `llvm_asm!` to avoid continued maintenance cost.
Closes#70173.
Closes#92794.
Closes#87612.
Closes#82065.
cc `@rust-lang/wg-inline-asm`
r? `@Amanieu`
Update rayon and rustc-rayon
This updates rayon for various tools and rustc-rayon for the compiler's parallel mode.
- rayon v1.3.1 -> v1.5.1
- rayon-core v1.7.1 -> v1.9.1
- rustc-rayon v0.3.1 -> v0.3.2
- rustc-rayon-core v0.3.1 -> v0.3.2
... and indirectly, this updates all of crossbeam-* to their latest versions.
Fixes#92677 by removing crossbeam-queue, but there's still a lingering question about how tidy discovers "runtime" dependencies. None of this is truly in the standard library's dependency tree at all.
Link impl items to corresponding trait items in late resolver.
Hygienically linking trait impl items to declarations in the trait can be done directly by the late resolver. In fact, it is already done to diagnose unknown items.
This PR uses this resolution work and stores the `DefId` of the trait item in the HIR. This avoids having to do this resolution manually later.
r? `@matthewjasper`
Related to #90639. The added `trait_item_id` field can be moved to `ImplItemRef` to be used directly by your PR.
Prefer projection candidates instead of param_env candidates for Sized predicates
Fixes#89352
Also includes some drive by logging and verbose printing changes that I found useful when debugging this, but I can remove this if needed.
This is a little hacky - but imo no more than the rest of `candidate_should_be_dropped_in_favor_of`. Importantly, in a Chalk-like world, both candidates should be completely compatible.
r? ```@nikomatsakis```
Closure capture cleanup & refactor
Follow up of #89648
Each commit is self-contained and the rationale/changes are documented in the commit message, so it's advisable to review commit by commit.
The code is significantly cleaner (at least IMO), but that could have some perf implication, so I'd suggest a perf run.
r? `@wesleywiser`
cc `@arora-aman`
[code coverage] Fix missing dead code in modules that are never called
The issue here is that the logic used to determine which CGU to put the dead function stubs in doesn't handle cases where a module is never assigned to a CGU (which is what happens when all of the code in the module is dead).
The partitioning logic also caused issues in #85461 where inline functions were duplicated into multiple CGUs resulting in duplicate symbols.
This commit fixes the issue by removing the complex logic used to assign dead code stubs to CGUs and replaces it with a much simpler model: we pick one CGU to hold all the dead code stubs. We pick a CGU which has exported items which increases the likelihood the linker won't throw away our dead functions and we pick the smallest to minimize the impact on compilation times for crates with very large CGUs.
Fixes#91661Fixes#86177Fixes#85718Fixes#79622
r? ```@tmandry```
cc ```@richkadel```
This PR is not urgent so please don't let it interrupt your holidays! 🎄🎁
The field is also renamed from `ident` to `name. In most cases,
we don't actually need the `Span`. A new `ident` method is added
to `VariantDef` and `FieldDef`, which constructs the full `Ident`
using `tcx.def_ident_span()`. This method is used in the cases
where we actually need an `Ident`.
This makes incremental compilation properly track changes
to the `Span`, without all of the invalidations caused by storing
a `Span` directly via an `Ident`.
Normalize struct tail type when checking Pointee trait
Let's go ahead and implement the FIXMEs by properly normalizing the struct-tail type when satisfying a Pointee obligation. This should fix the ICE when we try to calculate a layout depending on `<Ty as Pointee>::Metadata` later.
Fixes#92128Fixes#92577
Additionally, mark the obligation as ambiguous if there are any infer types in that struct-tail type. This has the effect of causing `<_ as Pointee>::Metadata` to be properly replaced with an infer variable ([here](https://github.com/rust-lang/rust/blob/master/compiler/rustc_trait_selection/src/traits/project.rs#L813)) and registered as an obligation... this turns out to be very important in unifying function parameters with formals that are assoc types.
Fixes#91446
Ensure that `Fingerprint` caching respects hashing configuration
Fixes#92266
In some `HashStable` impls, we use a cache to avoid re-computing
the same `Fingerprint` from the same structure (e.g. an `AdtDef`).
However, the `StableHashingContext` used can be configured to
perform hashing in different ways (e.g. skipping `Span`s). This
configuration information is not included in the cache key,
which will cause an incorrect `Fingerprint` to be used if
we hash the same structure with different `StableHashingContext`
settings.
To fix this, the configuration settings of `StableHashingContext`
are split out into a separate `HashingControls` struct. This
struct is used as part of the cache key, ensuring that our caches
always produce the correct result for the given settings.
With this in place, we now turn off `Span` hashing during the
entire process of computing the hash included in legacy symbols.
This current has no effect, but will matter when a future PR
starts hashing more `Span`s that we currently skip.
Mak DefId to AccessLevel map in resolve for export
hir_id to accesslevel in resolve and applied in privacy
using local def id
removing tracing probes
making function not recursive and adding comments
Move most of Exported/Public res to rustc_resolve
moving public/export res to resolve
fix missing stability attributes in core, std and alloc
move code to access_levels.rs
return for some kinds instead of going through them
Export correctness, macro changes, comments
add comment for import binding
add comment for import binding
renmae to access level visitor, remove comments, move fn as closure, remove new_key
fmt
fix rebase
fix rebase
fmt
fmt
fix: move macro def to rustc_resolve
fix: reachable AccessLevel for enum variants
fmt
fix: missing stability attributes for other architectures
allow unreachable pub in rustfmt
fix: missing impl access level + renaming export to reexport
Missing impl access level was found thanks to a test in clippy
rustdoc: Introduce a resolver cache for sharing data between early doc link resolution and later passes
The refactoring parts of https://github.com/rust-lang/rust/pull/88679, shouldn't cause any slowdowns.
r? `@jyn514`
Region info is completely unnecessary for upvar capture kind computation
and is only needed to create the final upvar tuple ty. Doing so makes
creation of UpvarCapture very cheap and expose further cleanup opportunity.
Fixes#92266
In some `HashStable` impls, we use a cache to avoid re-computing
the same `Fingerprint` from the same structure (e.g. an `AdtDef`).
However, the `StableHashingContext` used can be configured to
perform hashing in different ways (e.g. skipping `Span`s). This
configuration information is not included in the cache key,
which will cause an incorrect `Fingerprint` to be used if
we hash the same structure with different `StableHashingContext`
settings.
To fix this, the configuration settings of `StableHashingContext`
are split out into a separate `HashingControls` struct. This
struct is used as part of the cache key, ensuring that our caches
always produce the correct result for the given settings.
With this in place, we now turn off `Span` hashing during the
entire process of computing the hash included in legacy symbols.
This current has no effect, but will matter when a future PR
starts hashing more `Span`s that we currently skip.
Remove `NullOp::Box`
Follow up of #89030 and MCP rust-lang/compiler-team#460.
~1 month later nothing seems to be broken, apart from a small regression that #89332 (1aac85bb716c09304b313d69d30d74fe7e8e1a8e) shows could be regained by remvoing the diverging path, so it shall be safe to continue and remove `NullOp::Box` completely.
r? `@jonas-schievink`
`@rustbot` label T-compiler
Continue supporting -Z instrument-coverage for compatibility for now,
but show a deprecation warning for it.
Update uses and documentation to use the -C option.
Move the documentation from the unstable book to stable rustc
documentation.
Instead of special-casing mutable pointers/references, we
now support general generic types (currently, we handle
`ty::Ref`, `ty::RawPtr`, and `ty::Adt`)
When a `ty::Adt` is involved, we show an additional note
explaining which of the type's generic parameters is
invariant (e.g. the `T` in `Cell<T>`). Currently, we don't
explain *why* a particular generic parameter ends up becoming
invariant. In the general case, this could require printing
a long 'backtrace' of types, so doing this would be
more suitable for a follow-up PR.
We still only handle the case where our variance switches
to `ty::Invariant`.
rustc_metadata: Encode list of all crate's traits into metadata
While working on https://github.com/rust-lang/rust/pull/88679 I noticed that rustdoc is casually doing something quite expensive, something that is used only for error reporting in rustc - collecting all traits from all crates in the dependency tree.
This PR trades some minor extra time spent by metadata encoder in rustc for major gains for rustdoc (and for rustc runs with errors, which execute the `all_traits` query for better diagnostics).
CTFE eval_fn_call: use FnAbi to determine argument skipping and compatibility
This makes use of the `FnAbi` type in CTFE/Miri, which `@eddyb` has been saying for years is what we should do.^^ `FnAbi` is used to
- determine which arguments to skip (rather than the previous heuristic of skipping ZST arguments with the Rust ABI)
- impose further restrictions on whether caller and callee are consistent in how a given argument is passed
I was hoping it would also simplify the code, but that is not the case -- the previous type compatibility checks are still required (AFAIK), only the ZST skipping is gone and that took barely any code. We also need some hacks because `FnAbi` assumes a certain way of implementing `caller_location` (by passing extra arguments), but Miri can just read the caller location from the call stack so it doesn't need those arguments. (The fact that every backend has to separately implement support for these arguments seems suboptimal -- looks like this might have been better implemented on the MIR level.) To avoid having to implement those unnecessary arguments in Miri, we just compute *whether* the argument is present on the caller/callee side, but don't actually pass that argument around.
I have no idea if this looks the way `@eddyb` thinks it should look... but it makes Miri's test suite pass. ;)
One of rustc's tests fails unfortunately (`ui/const-generics/issues/issue-67739.rs`), some const generic code that is evaluated too early -- I think that should raise `TooGeneric` but instead it ICEs. My assumption is this is some FnAbi code that has not been properly tested on polymorphic code, but it might also be me calling that FnAbi code the wrong way.
r? `@oli-obk` `@eddyb`
Fixes https://github.com/rust-lang/rust/issues/56166
Miri PR at https://github.com/rust-lang/miri/pull/1928
Store a `DefId` instead of an `AdtDef` in `AggregateKind::Adt`
The `AggregateKind` enum ends up in the final mir `Body`. Currently,
any changes to `AdtDef` (regardless of how significant they are)
will legitimately cause the overall result of `optimized_mir` to change,
invalidating any codegen re-use involving that mir.
This will get worse once we start hashing the `Span` inside `FieldDef`
(which is itself contained in `AdtDef`).
To try to reduce these kinds of invalidations, this commit changes
`AggregateKind::Adt` to store just the `DefId`, instead of the full
`AdtDef`. This allows the result of `optimized_mir` to be unchanged
if the `AdtDef` changes in a way that doesn't actually affect any
of the MIR we build.
Update chalk to 0.75.0
- Compute flags in `intern_ty`
- Remove `tracing-serde` from `PERMITTED_DEPENDENCIES`
- Bump `tracing-tree` to 0.2.0
- Bump `tracing-subscriber` to 0.3.3
The `AggregateKind` enum ends up in the final mir `Body`. Currently,
any changes to `AdtDef` (regardless of how significant they are)
will legitimately cause the overall result of `optimized_mir` to change,
invalidating any codegen re-use involving that mir.
This will get worse once we start hashing the `Span` inside `FieldDef`
(which is itself contained in `AdtDef`).
To try to reduce these kinds of invalidations, this commit changes
`AggregateKind::Adt` to store just the `DefId`, instead of the full
`AdtDef`. This allows the result of `optimized_mir` to be unchanged
if the `AdtDef` changes in a way that doesn't actually affect any
of the MIR we build.
The issue here is that the logic used to determine which CGU to put the
dead function stubs in doesn't handle cases where a module is never
assigned to a CGU.
The partitioning logic also caused issues in #85461 where inline
functions were duplicated into multiple CGUs resulting in duplicate
symbols.
This commit fixes the issue by removing the complex logic used to assign
dead code stubs to CGUs and replaces it with a much simplier model: we
pick one CGU to hold all the dead code stubs. We pick a CGU which has
exported items which increases the likelihood the linker won't throw
away our dead functions and we pick the smallest to minimize the impact
on compilation times for crates with very large CGUs.
Fixes#86177Fixes#85718Fixes#79622
This makes `Obligation` two words bigger, but avoids allocating a lot of
the time.
I previously tried this in #73983 and it didn't help much, but local
timings look more promising now.
Remove `in_band_lifetimes` from `rustc_middle`
See #91867
This was mostly straightforward. In several places, I take advantage
of the fact that lifetimes are non-hygenic: a macro declares the
'tcx' lifetime, which is then used in types passed in as macro
arguments.
Remove `SymbolStr`
This was originally proposed in https://github.com/rust-lang/rust/pull/74554#discussion_r466203544. As well as removing the icky `SymbolStr` type, it allows the removal of a lot of `&` and `*` occurrences.
Best reviewed one commit at a time.
r? `@oli-obk`
Add user seed to `-Z randomize-layout`
Allows users of -`Z randomize-layout` to provide `-Z layout-seed=<seed>` in order to further randomizing type layout randomization. Extension of [compiler-team/#457](https://github.com/rust-lang/compiler-team/issues/457), allows users to change struct layouts without changing code and hoping that item path hashes change, aiding in detecting layout errors
hir: Do not introduce dummy type names for `extern` blocks in def paths
Use a separate nameless `DefPathData` variant instead.
Extracted from https://github.com/rust-lang/rust/pull/91795.
Implement normalize_erasing_regions queries in terms of 'try' version
Attempt to lessen performance regression caused by https://github.com/rust-lang/rust/pull/91255
r? `@jackh726`
See #91867
This was mostly straightforward. In several places, I take advantage
of the fact that lifetimes are non-hygenic: a macro declares the
'tcx' lifetime, which is then used in types passed in as macro
arguments.
extend `simplify_type`
might cause a slight perf inprovement and imo more accurately represents what types there are.
considering that I was going to use this in #85048 it seems like we might need this in the future anyways 🤷
Make `TyS::is_suggestable` check for non-suggestable types structually
Not sure if I went overboard checking substs in dyn types, etc. Let me know if I should simplify this function.
Fixes#91832
By changing `as_str()` to take `&self` instead of `self`, we can just
return `&str`. We're still lying about lifetimes, but it's a smaller lie
than before, where `SymbolStr` contained a (fake) `&'static str`!
Stabilize `iter::zip`
Hello all!
As the tracking issue (#83574) for `iter::zip` completed the final commenting period without any concerns being raised, I hereby submit this stabilization PR on the issue.
As the pull request that introduced the feature (#82917) states, the `iter::zip` function is a shorter way to zip two iterators. As it's generally a quality-of-life/ergonomic improvement, it has been integrated into the codebase without any trouble, and has been
used in many places across the rust compiler and standard library since March without any issues.
For more details, I would refer to `@cuviper's` original PR, or the [function's documentation](https://doc.rust-lang.org/std/iter/fn.zip.html).
Tweak errors coming from `for`-loop, `?` and `.await` desugaring
* Suggest removal of `.await` on non-`Future` expression
* Keep track of obligations introduced by desugaring
* Remove span pointing at method for obligation errors coming from desugaring
* Point at called local sync `fn` and suggest making it `async`
```
error[E0277]: `()` is not a future
--> $DIR/unnecessary-await.rs:9:10
|
LL | boo().await;
| -----^^^^^^ `()` is not a future
| |
| this call returns `()`
|
= help: the trait `Future` is not implemented for `()`
help: do not `.await` the expression
|
LL - boo().await;
LL + boo();
|
help: alternatively, consider making `fn boo` asynchronous
|
LL | async fn boo () {}
| +++++
```
Fix#66731.
Stabilise `feature(const_generics_defaults)`
`feature(const_generics_defaults)` is complete implementation wise and has a pretty extensive test suite so I think is ready for stabilisation.
needs stabilisation report and maybe an RFC 😅
r? `@lcnr`
cc `@rust-lang/project-const-generics`
Tweak assoc type obligation spans
* Point at RHS of associated type in obligation span
* Point at `impl` assoc type on projection error
* Reduce verbosity of recursive obligations
* Point at source of binding lifetime obligation
* Tweak "required bound" note
* Tweak "expected... found opaque (return) type" labels
* Point at set type in impl assoc type WF errors
r? `@oli-obk`
This is a(n uncontroversial) subset of #85799.
Point at capture points for non-`'static` reference crossing a `yield` point
```
error[E0759]: `self` has an anonymous lifetime `'_` but it needs to satisfy a `'static` lifetime requirement
--> $DIR/issue-72312.rs:10:24
|
LL | pub async fn start(&self) {
| ^^^^^ this data with an anonymous lifetime `'_`...
...
LL | require_static(async move {
| -------------- ...is required to live as long as `'static` here...
LL | &self;
| ----- ...and is captured here
|
note: `'static` lifetime requirement introduced by this trait bound
--> $DIR/issue-72312.rs:2:22
|
LL | fn require_static<T: 'static>(val: T) -> T {
| ^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0759`.
```
Fix#72312.
Suggest using a temporary variable to fix borrowck errors
Fixes#77834.
In Rust, nesting method calls with both require `&mut` access to `self`
produces a borrow-check error:
error[E0499]: cannot borrow `*self` as mutable more than once at a time
--> src/lib.rs:7:14
|
7 | self.foo(self.bar());
| ---------^^^^^^^^^^-
| | | |
| | | second mutable borrow occurs here
| | first borrow later used by call
| first mutable borrow occurs here
That's because Rust has a left-to-right evaluation order, and the method
receiver is passed first. Thus, the argument to the method cannot then
mutate `self`.
There's an easy solution to this error: just extract a local variable
for the inner argument:
let tmp = self.bar();
self.foo(tmp);
However, the error doesn't give any suggestion of how to solve the
problem. As a result, new users may assume that it's impossible to
express their code correctly and get stuck.
This commit adds a (non-structured) suggestion to extract a local
variable for the inner argument to solve the error. The suggestion uses
heuristics that eliminate most false positives, though there are a few
false negatives (cases where the suggestion should be emitted but is
not). Those other cases can be implemented in a future change.
Improve the readability of `List<T>`.
This commit does the following.
- Expands on some of the things already mentioned in comments.
- Describes the uniqueness assumption, which is critical but wasn't
mentioned at all.
- Rewrites `empty()` into a clearer form, as provided by Daniel
Henry-Mantilla on Zulip.
- Reorders things slightly so that more important things
are higher up, and incidental things are lower down, which makes
reading the code easier.
r? ````@lcnr````
* Point at RHS of associated type in obligation span
* Point at `impl` assoc type on projection error
* Reduce verbosity of recursive obligations
* Point at source of binding lifetime obligation
* Tweak "required bound" note
* Tweak "expected... found opaque (return) type" labels
* Point at set type in impl assoc type WF errors
In Rust, nesting method calls with both require `&mut` access to `self`
produces a borrow-check error:
error[E0499]: cannot borrow `*self` as mutable more than once at a time
--> src/lib.rs:7:14
|
7 | self.foo(self.bar());
| ---------^^^^^^^^^^-
| | | |
| | | second mutable borrow occurs here
| | first borrow later used by call
| first mutable borrow occurs here
That's because Rust has a left-to-right evaluation order, and the method
receiver is passed first. Thus, the argument to the method cannot then
mutate `self`.
There's an easy solution to this error: just extract a local variable
for the inner argument:
let tmp = self.bar();
self.foo(tmp);
However, the error doesn't give any suggestion of how to solve the
problem. As a result, new users may assume that it's impossible to
express their code correctly and get stuck.
This commit adds a (non-structured) suggestion to extract a local
variable for the inner argument to solve the error. The suggestion uses
heuristics that eliminate most false positives, though there are a few
false negatives (cases where the suggestion should be emitted but is
not). Those other cases can be implemented in a future change.
This commit does the following.
- Expands on some of the things already mentioned in comments.
- Describes the uniqueness assumption, which is critical but wasn't
mentioned at all.
- Rewrites `empty()` into a clearer form, as provided by Daniel
Henry-Mantilla on Zulip.
- Reorders things slightly so that more important things
are higher up, and incidental things are lower down, which makes
reading the code easier.
Allow for failure of subst_normalize_erasing_regions in const_eval
Fixes https://github.com/rust-lang/rust/issues/72845
Using associated types that cannot be normalized previously resulted in an ICE. We now allow for normalization failure and return a "TooGeneric" error in that case.
r? ```@RalfJung``` maybe?
Add a MIR pass manager (Taylor's Version)
The final draft of #91386 and #77665.
While the compile-time constraints in #91386 are cool, I decided on a more minimal approach for now. I want to explore phase constraints and maybe relative-ordering constraints in the future, though. This should preserve existing behavior **exactly** (please let me know if it doesn't) while making the following changes to the way we organize things today:
- Each `MirPhase` now corresponds to a single MIR pass. `run_passes` is not responsible for listing the correct MIR phase.
- `run_passes` no longer silently skips passes if the declared MIR phase is greater than or equal to the body's. This has bitten me multiple times. If you want this behavior, you can always branch on `body.phase` yourself.
- If your pass is solely to emit errors, you can use the `MirLint` interface instead, which gets a shared reference to `Body` instead of a mutable one. By differentiating the two, I hope to make it clearer in the short term where lints belong in the pipeline. In the long term perhaps we could enforce this at compile-time?
- MIR is no longer dumped for passes that aren't enabled, or for lints.
I tried to check that `-Zvalidate` still works correctly, since the MIR phase is now updated as soon as the associated pass is done, instead of at the end of all the passes in `run_passes`. However, it looks like `-Zvalidate` is broken with current nightlies anyways 😢 (it spits out a bunch of errors).
cc `@oli-obk` `@wesleywiser`
r? rust-lang/wg-mir-opt
std: Stabilize the `thread_local_const_init` feature
This commit is intended to follow the stabilization disposition of the
FCP that has now finished in #84223. This stabilizes the ability to flag
thread local initializers as `const` expressions which enables the macro
to generate more efficient code for accessing it, notably removing
runtime checks for initialization.
More information can also be found in #84223 as well as the tests where
the feature usage was removed in this PR.
Closes#84223
Keep spans for generics in `#[derive(_)]` desugaring
Keep the spans for generics coming from a `derive`d Item, so that errors
and suggestions have better detail.
Fix#84003.
* Annotate `derive`d spans from the user's code with the appropciate context
* Add `Span::can_be_used_for_suggestion` to query if the underlying span
at the users' code
Rollup of 12 pull requests
Successful merges:
- #89954 (Fix legacy_const_generic doc arguments display)
- #91321 (Handle placeholder regions in NLL type outlive constraints)
- #91329 (Fix incorrect usage of `EvaluatedToOk` when evaluating `TypeOutlives`)
- #91364 (Improve error message for incorrect field accesses through raw pointers)
- #91387 (Clarify and tidy up explanation of E0038)
- #91410 (Move `#![feature(const_precise_live_drops)]` checks earlier in the pipeline)
- #91435 (Improve diagnostic for missing half of binary operator in `if` condition)
- #91444 (disable tests in Miri that take too long)
- #91457 (Add additional test from rust issue number 91068)
- #91460 (Document how `last_os_error` should be used)
- #91464 (Document file path case sensitivity)
- #91466 (Improve the comments in `Symbol::interner`.)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Move `#![feature(const_precise_live_drops)]` checks earlier in the pipeline
Should mitigate the issues found during MCP on #73255.
Once this is done, we should clean up the queries a bit, since I think `mir_drops_elaborated_and_const_checked` can be merged back into `mir_promoted`.
Fixes#90770.
cc ``@rust-lang/wg-const-eval``
r? ``@nikomatsakis`` (since they reviewed #71824)
Cleanup: Eliminate ConstnessAnd
This is almost a behaviour-free change and purely a refactoring. "almost" because we appear to be using the wrong ParamEnv somewhere already, and this is now exposed by failing a test using the unstable `~const` feature.
We most definitely need to review all `without_const` and at some point should probably get rid of many of them by using `TraitPredicate` instead of `TraitRef`.
This is a continuation of https://github.com/rust-lang/rust/pull/90274.
r? `@oli-obk`
cc `@spastorino` `@ecstatic-morse`
... if they use arbitrary enum discriminant. Code like
```rust
enum Enum {
Foo = 1,
Bar(),
Baz{}
}
```
seems to be unintentionally allowed so we couldn't disallow them now,
but we could disallow them if arbitrary enum discriminant is used before
1.56 hits stable.
Add support for LLVM coverage mapping format versions 5 and 6
This PR cherry-pick's Swatinem's initial commit in unsubmitted PR #90047.
My additional commit augments Swatinem's great starting point, but adds full support for LLVM
Coverage Mapping Format version 6, conditionally, if compiling with LLVM 13.
Version 6 requires adding the compilation directory when file paths are
relative, and since Rustc coverage maps use relative paths, we should
add the expected compilation directory entry.
Note, however, that with the compilation directory, coverage reports
from `llvm-cov show` can now report file names (when the report includes
more than one file) with the full absolute path to the file.
This would be a problem for test results, but the workaround (for the
rust coverage tests) is to include an additional `llvm-cov show`
parameter: `--compilation-dir=.`
This commit is intended to follow the stabilization disposition of the
FCP that has now finished in #84223. This stabilizes the ability to flag
thread local initializers as `const` expressions which enables the macro
to generate more efficient code for accessing it, notably removing
runtime checks for initialization.
More information can also be found in #84223 as well as the tests where
the feature usage was removed in this PR.
Closes#84223
Take a LocalDefId in expect_*item.
Items and item-likes are always HIR owners.
When trying to find such nodes, there is no ambiguity, the `LocalDefId` and the `HirId::owner` always match.
In such cases, `local_def_id_to_hir_id` does not carry any meaningful information, so we can just skip calling it altogether.
Nothing else makes sense, and there is no "danger" in doing so, as it only does something if there are const bounds, which are unstable. This used to happen implicitly via the inferctxt before, which was much more fragile.
Print associated types on opaque `impl Trait` types
This PR generalizes #91021, printing associated types for all opaque `impl Trait` types instead of just special-casing for future.
before:
```
error[E0271]: type mismatch resolving `<impl Iterator as Iterator>::Item == u32`
```
after:
```
error[E0271]: type mismatch resolving `<impl Iterator<Item = usize> as Iterator>::Item == u32`
```
---
Questions:
1. I'm kinda lost in binders hell with this one. Is all of the `rebind`ing necessary?
2. Is there a map collection type that will give me a stable iteration order? Doesn't seem like TraitRef is Ord, so I can't just sort later..
3. I removed the logic that suppresses printing generator projection types. It creates outputs like this [gist](https://gist.github.com/compiler-errors/d6f12fb30079feb1ad1d5f1ab39a3a8d). Should I put that back?
4. I also added spaces between traits, `impl A+B` -> `impl A + B`. I quite like this change, but is there a good reason to keep it like that?
r? ````@estebank````
Suggestion to wrap inner types using 'allocator_api' in tuple
This PR provides a suggestion to wrap the inner types in tuple when being along with 'allocator_api'.
Closes https://github.com/rust-lang/rust/issues/83250
```rust
fn main() {
let _vec: Vec<u8, _> = vec![]; //~ ERROR use of unstable library feature 'allocator_api'
}
```
```diff
error[E0658]: use of unstable library feature 'allocator_api'
--> $DIR/suggest-vec-allocator-api.rs:2:23
|
LL | let _vec: Vec<u8, _> = vec![];
- | ^
+ | ----^
+ | |
+ | help: consider wrapping the inner types in tuple: `(u8, _)`
|
= note: see issue #32838 <https://github.com/rust-lang/rust/issues/32838> for more information
= help: add `#![feature(allocator_api)]` to the crate attributes to enable
```
Elaborate `Future::Output` when printing opaque `impl Future` type
I would love to see the `Output =` type when printing type errors involving opaque `impl Future`.
[Test code](https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=a800b481edd31575fbcaf5771a9c3678)
Before (cut relevant part of output):
```
note: while checking the return type of the `async fn`
--> /home/michael/test.rs:5:19
|
5 | async fn bar() -> usize {
| ^^^^^ checked the `Output` of this `async fn`, found opaque type
= note: expected type `usize`
found opaque type `impl Future`
```
After:
```
note: while checking the return type of the `async fn`
--> /home/michael/test.rs:5:19
|
5 | async fn bar() -> usize {
| ^^^^^ checked the `Output` of this `async fn`, found opaque type
= note: expected type `usize`
found opaque type `impl Future<Output = usize>`
```
Note the "found opaque type `impl Future<Output = usize>`" in the new output.
----
Questions:
1. We skip printing the output type when it's a projection, since I have been seeing some types like `impl Future<Output = <[static generator@/home/michael/test.rs:2:11: 2:21] as Generator<ResumeTy>>::Return>` which are not particularly helpful and leak implementation detail.
* Am I able to normalize this type within `rustc_middle::ty::print::pretty`? Alternatively, can we normalize it when creating the diagnostic? Otherwise, I'm fine with skipping it and falling back to the old output.
* Should I suppress any other types? I didn't encounter anything other than this generator projection type.
2. Not sure what the formatting of this should be. Do I include spaces in `Output = `?
fix CTFE/Miri simd_insert/extract on array-style repr(simd) types
The changed test would previously fail since `place_index` would just return the only field of `f32x4`, i.e., the array -- rather than *indexing into* the array which is what we have to do.
The new helper methods will also be needed for https://github.com/rust-lang/miri/issues/1912.
r? ``````@oli-obk``````
This function parameter attribute was introduced in https://github.com/rust-lang/rust/pull/44866 as an intermediate step in implementing `impl Trait`, it's not necessary or used anywhere by itself.
Because it's always `'tcx`. In fact, some of them use a mixture of
passed-in `$tcx` and hard-coded `'tcx`, so no other lifetime would even
work.
This makes the code easier to read.
Remove `DropArena`.
Most arena-allocate types that impl `Drop` get their own `TypedArena`, but a
few infrequently used ones share a `DropArena`. This sharing adds complexity
but doesn't help performance or memory usage. Perhaps it was more effective in
the past prior to some other improvements to arenas.
This commit removes `DropArena` and the sharing of arenas via the `few`
attribute of the `arena_types` macro. This change removes over 100 lines of
code and nine uses of `unsafe` (one of which affects the parallel compiler) and
makes the remaining code easier to read.
Most arena-allocate types that impl `Drop` get their own `TypedArena`, but a
few infrequently used ones share a `DropArena`. This sharing adds complexity
but doesn't help performance or memory usage. Perhaps it was more effective in
the past prior to some other improvements to arenas.
This commit removes `DropArena` and the sharing of arenas via the `few`
attribute of the `arena_types` macro. This change removes over 100 lines of
code and nine uses of `unsafe` (one of which affects the parallel compiler) and
makes the remaining code easier to read.
selection deduplicates obligations through a hashset at some point, computing the hashes for ObligationCauseCode
appears to dominate the hashing cost. bodyid + span + discriminant hash hopefully will sufficiently unique
unique enough.
implement rfc-2528 type_changing-struct-update
This PR implement rfc2528-type_changing-struct-update.
The main change process is as follows:
1. Move the processing part of `base_expr` into `check_expr_struct_fields` to avoid returning `remaining_fields` (a relatively complex hash table)
2. Before performing the type consistency check(`check_expr_has_type_or_error`), if the `type_changing_struct_update` feature is set, enter a different processing flow, otherwise keep the original flow
3. In the case of the same structure definition, check each field in `remaining_fields`. If the field in `base_expr` is not the suptype of the field in `adt_ty`, an error(`FeildMisMatch`) will be reported.
The MIR part does not need to be changed, because only the items contained in `remaining_fields` will be extracted from `base_expr` when MIR is generated. This means that fields with different types in `base_expr` will not be used
Updates #86618
cc `@nikomatsakis`
Type inference for inline consts
Fixes#78132Fixes#78174Fixes#81857Fixes#89964
Perform type checking/inference of inline consts in the same context as the outer def, similar to what is currently done to closure.
Doing so would require `closure_base_def_id` of the inline const to return the outer def, and since `closure_base_def_id` can be called on non-local crate (and thus have no HIR available), a new `DefKind` is created for inline consts.
The type of the generated anon const can capture lifetime of outer def, so we couldn't just use the typeck result as the type of the inline const's def. Closure has a similar issue, and it uses extra type params `CK, CS, U` to capture closure kind, input/output signature and upvars. I use a similar approach for inline consts, letting it have an extra type param `R`, and then `typeof(InlineConst<[paremt generics], R>)` would just be `R`. In borrowck region requirements are also propagated to the outer MIR body just like it's currently done for closure.
With this PR, inline consts in expression position are quitely usable now; however the usage in pattern position is still incomplete -- since those does not remain in the MIR borrowck couldn't verify the lifetime there. I have left an ignored test as a FIXME.
Some disucssions can be found on [this Zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/260443-project-const-generics/topic/inline.20consts.20typeck).
cc `````@spastorino````` `````@lcnr`````
r? `````@nikomatsakis`````
`````@rustbot````` label A-inference F-inline_const T-compiler
The only reason to use `abort_if_errors` is when the program is so broken that either:
1. later passes get confused and ICE
2. any diagnostics from later passes would be noise
This is never the case for lints, because the compiler has to be able to deal with `allow`-ed lints.
So it can continue to lint and compile even if there are lint errors.
Rollup of 6 pull requests
Successful merges:
- #90487 (Add a chapter on reading Rustdoc output)
- #90508 (Apply adjustments for field expression even if inaccessible)
- #90627 (Suggest dereference of `Box` when inner type is expected)
- #90642 (use matches!() macro in more places)
- #90646 (type error go brrrrrrrr)
- #90649 (Run reveal_all on MIR when inlining is activated.)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
type error go brrrrrrrr
Fixes#90444
when we relate something like:
`fn(fn((), (), u32))` with `fn(fn((), (), ()))`
we relate the inner fn ptrs:
`fn((), (), u32)` with `fn((), (), ())`
yielding a `TypeError::ArgumentSorts(_, 2)` which we then use as the `TypeError` for the `fn(fn(..))` which later causes the ICE as the `2` does not correspond to any input or output types in `fn(_)`
r? `@estebank`
Revert "Add rustc lint, warning when iterating over hashmaps"
Fixes perf regressions introduced in https://github.com/rust-lang/rust/pull/90235 by temporarily reverting the relevant PR.
Implement coherence checks for negative trait impls
The main purpose of this PR is to be able to [move Error trait to core](https://github.com/rust-lang/project-error-handling/issues/3).
This feature is necessary to handle the following from impl on box.
```rust
impl From<&str> for Box<dyn Error> { ... }
```
Without having negative traits affect coherence moving the error trait into `core` and moving that `From` impl to `alloc` will cause the from impl to no longer compiler because of a potential future incompatibility. The compiler indicates that `&str` _could_ introduce an `Error` impl in the future, and thus prevents the `From` impl in `alloc` that would cause overlap with `From<E: Error> for Box<dyn Error>`. Adding `impl !Error for &str {}` with the negative trait coherence feature will disable this error by encoding a stability guarantee that `&str` will never implement `Error`, making the `From` impl compile.
We would have this in `alloc`:
```rust
impl From<&str> for Box<dyn Error> {} // A
impl<E> From<E> for Box<dyn Error> where E: Error {} // B
```
and this in `core`:
```rust
trait Error {}
impl !Error for &str {}
```
r? `@nikomatsakis`
This PR was built on top of `@yaahc` PR #85764.
Language team proposal: to https://github.com/rust-lang/lang-team/issues/96
Do not depend on the stored value when trying to cache on disk.
Having different criteria for loading and saving of query results can lead to saved results that may never be loaded.
Since the on-disk cache is discarded as soon as a compilation error is issued, there should not be any need for an exclusion mecanism based on errors.
As a result, the possibility to condition the storage on the value itself does not appear useful.
Remove hir::map::blocks and use FnKind instead
The principal tool is `FnLikeNode`, which is not often used and can be easily implemented using `rustc_hir::intravisit::FnKind`.
Adopt let_else across the compiler
This performs a substitution of code following the pattern:
```
let <id> = if let <pat> = ... { identity } else { ... : ! };
```
To simplify it to:
```
let <pat> = ... { identity } else { ... : ! };
```
By adopting the `let_else` feature (cc #87335).
The PR also updates the syn crate because the currently used version of the crate doesn't support `let_else` syntax yet.
Note: Generally I'm the person who *removes* usages of unstable features from the compiler, not adds more usages of them, but in this instance I think it hopefully helps the feature get stabilized sooner and in a better state. I have written a [comment](https://github.com/rust-lang/rust/issues/87335#issuecomment-944846205) on the tracking issue about my experience and what I feel could be improved before stabilization of `let_else`.
Do not promote values with const drop that need to be dropped
Changes from #88558 allowed using `~const Drop` in constants by
introducing a new `NeedsNonConstDrop` qualif.
The new qualif was also used for promotion purposes, and allowed
promotion to happen for values that needs to be dropped but which
do have a const drop impl.
Since for promoted the drop implementation is never executed,
this lead to observable change in behaviour. For example:
```rust
struct Panic();
impl const Drop for Panic {
fn drop(&mut self) {
panic!();
}
}
fn main() {
let _ = &Panic();
}
```
Restore the use of `NeedsDrop` qualif during promotion to avoid the issue.
Changes from #88558 allowed using `~const Drop` in constants by
introducing a new `NeedsNonConstDrop` qualif.
The new qualif was also used for promotion purposes, and allowed
promotion to happen for values that needs to be dropped but which
do have a const drop impl.
Since for promoted the drop implementation is never executed,
this lead to observable change in behaviour. For example:
```rust
struct Panic();
impl const Drop for Panic {
fn drop(&mut self) {
panic!();
}
}
fn main() {
let _ = &Panic();
}
```
Restore the use of `NeedsDrop` qualif during promotion to avoid the issue.
Index and hash HIR as part of lowering
Part of https://github.com/rust-lang/rust/pull/88186
~Based on https://github.com/rust-lang/rust/pull/88880 (see merge commit).~
Once HIR is lowered, it is later indexed by the `index_hir` query and hashed for `crate_hash`. This PR moves those post-processing steps to lowering itself. As a side objective, the HIR crate data structure is refactored as an `IndexVec<LocalDefId, Option<OwnerInfo<'hir>>>` where `OwnerInfo` stores all the relevant information for an HIR owner.
r? `@michaelwoerister`
cc `@petrochenkov`
rustc_span: `Ident::invalid` -> `Ident::empty`
The equivalent for `Symbol`s was renamed some time ago (`kw::Invalid` -> `kw::Empty`), and it makes sense to do the same thing for `Ident`s as well.
ty::pretty: prevent infinite recursion for `extern crate` paths.
Fixes#55779, fixes#87932.
This fix is based on `@estebank's` idea in https://github.com/rust-lang/rust/issues/55779#issuecomment-614758510 - but instead of trying to get `try_print_visible_def_path_recur`'s cycle detection to work in this case, this PR "just" disables the "visible path" feature when printing the path to an `extern crate`, so that the old recursion chain of `try_print_visible_def_path -> print_def_path -> try_print_visible_def_path`, is now impossible.
Both tests have been confirmed to crash `rustc` because of a stack overflow, without the fix.
polymorphization: shims and predicates
Supersedes #75737 and #75414. This pull request includes up some changes to polymorphization which hadn't landed previously and gets stage2 bootstrapping and the test suite passing when polymorphization is enabled. There are still issues with `type_id` and polymorphization to investigate but this should get polymorphization in a reasonable state to work on.
- #75737 and #75414 both worked but were blocked on having the rest of the test suite pass (with polymorphization enabled) with and without the PRs. It makes more sense to just land these so that the changes are in.
- #75737's changes remove the restriction of `InstanceDef::Item` on polymorphization, so that shims can now be polymorphized. This won't have much of an effect until polymorphization's analysis is more advanced, but it doesn't hurt.
- #75414's changes remove all logic which marks parameters as used based on their presence in predicates - given #75675, this will enable more polymorphization and avoid the symbol clashes that predicate logic previously sidestepped.
- Polymorphization now explicitly checks (and skips) foreign items, this is necessary for stage2 bootstrapping to work when polymorphization is enabled.
- The conditional determining the emission of a note adding context to a post-monomorphization error has been modified. Polymorphization results in `optimized_mir` running for shims during collection where that wouldn't happen previously, some errors are emitted during `optimized_mir` and these were considered post-monomorphization errors with the existing logic (more errors and shims have a `DefId` coming from the std crate, not the local crate), adding a note that resulted in tests failing. It isn't particularly feasible to change where polymorphization runs or prevent it from using `optimized_mir`, so it seemed more reasonable to not change the conditional.
- `characteristic_def_id_of_type` was being invoked during partitioning for self types of impl blocks which had projections that depended on the value of unused generic parameters of a function - this caused a ICE in a debuginfo test. If partitioning is enabled and the instance needs substitution then this is skipped. That test still fails for me locally, but not with an ICE, but it fails in a fresh checkout too, so 🤷♂️.
r? `@lcnr`
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
Add test cases for unstable variants
Add test cases for doc hidden variants
Move is_doc_hidden to method on TyCtxt
Add unstable variants test to reachable-patterns ui test
Rename reachable-patterns -> omitted-patterns
Add new tier-3 target: armv7-unknown-linux-uclibceabihf
This change adds a new tier-3 target: armv7-unknown-linux-uclibceabihf
This target is primarily used in embedded linux devices where system resources are slim and glibc is deemed too heavyweight. Cross compilation C toolchains are available [here](https://toolchains.bootlin.com/) or via [buildroot](https://buildroot.org).
The change is based largely on a previous PR #79380 with a few minor modifications. The author of that PR was unable to push the PR forward, and graciously allowed me to take it over.
Per the [target tier 3 policy](https://github.com/rust-lang/rfcs/blob/master/text/2803-target-tier-policy.md), I volunteer to be the "target maintainer".
This is my first PR to Rust itself, so I apologize if I've missed things!
Refactor fingerprint reconstruction
This PR replaces can_reconstruct_query_key with fingerprint_style, which returns the style of the fingerprint for that query. This allows us to avoid trying to extract a DefId (or equivalent) from keys which *are* reconstructible because they're () but not as DefIds.
This is done with the goal of fixing -Zdump-dep-graph, which seems to have broken a while ago (I didn't try to bisect). Currently even on a `fn main() {}` file it'll ICE (you need to also pass -Zquery-dep-graph for it to work at all), and this patch indirectly fixes the cause of that ICE. This also adds a test for it continuing to work.
Prevent error reporting from outputting a recursion error if it finds an ambiguous trait impl during suggestions
Closes#89275
This fixes the compiler reporting a recursion error during another already in progress error by trying to make a conversion method suggestion and encounters ambiguous trait implementations that can convert a the original type into a type that can then be recursively converted into itself via another method in the trait.
Updated OverflowError struct to be an enum so I could differentiate between passes - it's no longer a ZST but I don't think that should be a problem as they only generate when there's an error in compiling code anyway
Turn vtable_allocation() into a query
This PR removes the untracked vtable-const-allocation cache from the `tcx` and turns the `vtable_allocation()` method into a query.
The change is pretty straightforward and should be backportable without too much effort.
Fixes https://github.com/rust-lang/rust/issues/89598.
Implement `#[link_ordinal(n)]`
Allows the use of `#[link_ordinal(n)]` with `#[link(kind = "raw-dylib")]`, allowing Rust to link against DLLs that export symbols by ordinal rather than by name. As long as the ordinal matches, the name of the function in Rust is not required to match the name of the corresponding function in the exporting DLL.
Part of #58713.
Introduce `tcx.get_diagnostic_name`
Introduces a "reverse lookup" for diagnostic items. This is mainly intended for `@rust-lang/clippy` which often does a long series of `is_diagnostic_item` calls for the same `DefId`.
r? `@oli-obk`
