Uplift `EarlyBinder` into `rustc_type_ir`
We also need to give `EarlyBinder` a `'tcx` param, so that we can carry the `Interner` in the `EarlyBinder` too. This is necessary because otherwise we have an unconstrained `I: Interner` parameter in many of the `EarlyBinder`'s inherent impls.
I also generally think that this is desirable to have, in case we later want to track some state in the `EarlyBinder`.
r? lcnr
Rename Unsafe to Safety
Alternative to #124455, which is to just have one Safety enum to use everywhere, this opens the posibility of adding `ast::Safety::Safe` that's useful for unsafe extern blocks.
This leaves us today with:
```rust
enum ast::Safety {
Unsafe(Span),
Default,
// Safe (going to be added for unsafe extern blocks)
}
enum hir::Safety {
Unsafe,
Safe,
}
```
We would convert from `ast::Safety::Default` into the right Safety level according the context.
The starting point for this was identical comments on two different
fields, in `ast::VariantData::Struct` and `hir::VariantData::Struct`:
```
// FIXME: investigate making this a `Option<ErrorGuaranteed>`
recovered: bool
```
I tried that, and then found that I needed to add an `ErrorGuaranteed`
to `Recovered::Yes`. Then I ended up using `Recovered` instead of
`Option<ErrorGuaranteed>` for these two places and elsewhere, which
required moving `ErrorGuaranteed` from `rustc_parse` to `rustc_ast`.
This makes things more consistent, because `Recovered` is used in more
places, and there are fewer uses of `bool` and
`Option<ErrorGuaranteed>`. And safer, because it's difficult/impossible
to set `recovered` to `Recovered::Yes` without having emitted an error.
Some hir cleanups
It seemed odd to not put `AnonConst` in the arena, compared with the other types that we did put into an arena. This way we can also give it a `Span` without growing a lot of other HIR data structures because of the extra field.
r? compiler
This makes it easier to read the trait definition for newcomers:
Sorted from least “complex” to most “complex” followed by trivial “plumbing”
and grouped by area.
* Move `allow_infer` above all `*_infer` methods
* It's the least complex method of those
* Allows the `*_infer` to be placed right next to each other
* Move `probe_ty_param_bounds` further down right next to `lower_assoc_ty` and `probe_adt`
* It's more complex than the `infer` methods, it should come “later”
* Now all required lowering functions are grouped together
* Move the “plumbing” function `set_tainted_by_errors` further down
below any actual lowering methods.
* Provided method should come last
Most of the tracing calls didn't fully leverage the power of `tracing`.
For example, several of them used to hard-code method names / tracing spans
as well as variable names. Use `#[instrument]` and `?var` / `%var` (etc.) instead.
In my opinion, this is the proper way to migrate them from the old
AstConv nomenclature to the new HIR ty lowering one.
Several (doc) comments were super outdated or didn't provide enough context.
Some doc comments shoved everything in a single paragraph without respecting
the fact that the first paragraph should be a single sentence because rustdoc
treats these as item descriptions / synopses on module pages.
Merge `collect_mod_item_types` query into `check_well_formed`
follow-up to https://github.com/rust-lang/rust/pull/121154
this removes more potential parallel-compiler bottlenecks and moves diagnostics for the same items next to each other, instead of grouping diagnostics by analysis kind
Unnamed union fields with enums are checked for, but if `find_field`
causes an ICE then the compiler won't get to that point.
Signed-off-by: David Wood <david@davidtw.co>
Delayed bug audit
I went through all the calls to `delayed_bug` and `span_delayed_bug` and found a few places where they could be avoided.
r? `@compiler-errors`
Don't ICE on anonymous struct in enum variant
Fixes#121446
Computing `adt_def` for the anon struct calls `adt_def` on the parent to find its repr. If the parent is a non-item (e.g. an enum variant) we should have already emitted at least one error, so we just use the repr of the anonymous struct to avoid an ICE.
cc ``@frank-king``
Noticed these while doing something else. There's no practical change, but it's preferable to use `DUMMY_SP` as little as possible, particularly when we have perfectlly useful `Span`s available.
Implement intrinsics with fallback bodies
fixes#93145 (though we can port many more intrinsics)
cc #63585
The way this works is that the backend logic for generating custom code for intrinsics has been made fallible. The only failure path is "this intrinsic is unknown". The `Instance` (that was `InstanceDef::Intrinsic`) then gets converted to `InstanceDef::Item`, which represents the fallback body. A regular function call to that body is then codegenned. This is currently implemented for
* codegen_ssa (so llvm and gcc)
* codegen_cranelift
other backends will need to adjust, but they can just keep doing what they were doing if they prefer (though adding new intrinsics to the compiler will then require them to implement them, instead of getting the fallback body).
cc `@scottmcm` `@WaffleLapkin`
### todo
* [ ] miri support
* [x] default intrinsic name to name of function instead of requiring it to be specified in attribute
* [x] make sure that the bodies are always available (must be collected for metadata)
Merge `impl_polarity` and `impl_trait_ref` queries
Hopefully this is perf neutral. I want to finish https://github.com/rust-lang/rust/pull/120835 and stop using the HIR in `coherent_trait`, which should then give us a perf improvement.
- improve diagnostics of field uniqueness check and representation check
- simplify the implementation of field uniqueness check
- remove some useless codes and improvement neatness
Make closures carry their own ClosureKind
Right now, we use the "`movability`" field of `hir::Closure` to distinguish a closure and a coroutine. This is paired together with the `CoroutineKind`, which is located not in the `hir::Closure`, but the `hir::Body`. This is strange and redundant.
This PR introduces `ClosureKind` with two variants -- `Closure` and `Coroutine`, which is put into `hir::Closure`. The `CoroutineKind` is thus removed from `hir::Body`, and `Option<Movability>` no longer needs to be a stand-in for "is this a closure or a coroutine".
r? eholk
`IntoDiagnostic` defaults to `ErrorGuaranteed`, because errors are the
most common diagnostic level. It makes sense to do likewise for the
closely-related (and much more widely used) `DiagnosticBuilder` type,
letting us write `DiagnosticBuilder<'a, ErrorGuaranteed>` as just
`DiagnosticBuilder<'a>`. This cuts over 200 lines of code due to many
multi-line things becoming single line things.
Renamings:
- find -> opt_hir_node
- get -> hir_node
- find_by_def_id -> opt_hir_node_by_def_id
- get_by_def_id -> hir_node_by_def_id
Fix rebase changes using removed methods
Use `tcx.hir_node_by_def_id()` whenever possible in compiler
Fix clippy errors
Fix compiler
Apply suggestions from code review
Co-authored-by: Vadim Petrochenkov <vadim.petrochenkov@gmail.com>
Add FIXME for `tcx.hir()` returned type about its removal
Simplify with with `tcx.hir_node_by_def_id`
Add `implement_via_object` to `rustc_deny_explicit_impl` to control object candidate assembly
Some built-in traits are special, since they are used to prove facts about the program that are important for later phases of compilation such as codegen and CTFE. For example, the `Unsize` trait is used to assert to the compiler that we are able to unsize a type into another type. It doesn't have any methods because it doesn't actually *instruct* the compiler how to do this unsizing, but this is later used (alongside an exhaustive match of combinations of unsizeable types) during codegen to generate unsize coercion code.
Due to this, these built-in traits are incompatible with the type erasure provided by object types. For example, the existence of `dyn Unsize<T>` does not mean that the compiler is able to unsize `Box<dyn Unsize<T>>` into `Box<T>`, since `Unsize` is a *witness* to the fact that a type can be unsized, and it doesn't actually encode that unsizing operation in its vtable as mentioned above.
The old trait solver gets around this fact by having complex control flow that never considers object bounds for certain built-in traits:
2f896da247/compiler/rustc_trait_selection/src/traits/select/candidate_assembly.rs (L61-L132)
However, candidate assembly in the new solver is much more lovely, and I'd hate to add this list of opt-out cases into the new solver. Instead of maintaining this complex and hard-coded control flow, instead we can make this a property of the trait via a built-in attribute. We already have such a build attribute that's applied to every single trait that we care about: `rustc_deny_explicit_impl`. This PR adds `implement_via_object` as a meta-item to that attribute that allows us to opt a trait out of object-bound candidate assembly as well.
r? `@lcnr`
