Strengthen state tracking in const-prop
Some/many of the changes are replicated between both the const-prop lint and the const-prop optimization.
Behaviour changes:
- const-prop opt does not give a span to propagated values. This was useless as that span's primary purpose is to diagnose evaluation failure in codegen.
- we remove the `OnlyPropagateInto` mode. It was only used for function arguments, which are better modeled by a write before entry.
- the tracking of assignments and discriminants make clearer that we do nothing in `NoPropagation` mode or on indirect places.
Rollup of 8 pull requests
Successful merges:
- #108651 (Forbid the use of `#[target_feature]` on `main`)
- #109009 (rustdoc: use restricted Damerau-Levenshtein distance for search)
- #109026 (Introduce `Rc::into_inner`, as a parallel to `Arc::into_inner`)
- #109029 (Gate usages of `dyn*` and const closures in macros)
- #109031 (Rename `config.toml.example` to `config.example.toml`)
- #109032 (Use `TyCtxt::trait_solver_next` in some places)
- #109047 (typo)
- #109052 (Add eslint check for rustdoc-gui tester)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Rename `config.toml.example` to `config.example.toml`
This had bothered me for a while as it leads to bad (missing) syntax highlighting in most editors I've used, and `@jyn514` suggested I just make the change and that the compatibility concerns I had don't really matter.
I suspect it will be a contentious one, so will not be offended if the outcome of this is to close the PR.
Gate usages of `dyn*` and const closures in macros
We silently accepted `dyn*` and const closures in macros as long as they didn't expand to anything containing these experimental features, unlike other gated features such as `for<'a>` binders on closures, etc. Let's not do that, to make sure nobody begins relying on this.
Introduce `Rc::into_inner`, as a parallel to `Arc::into_inner`
Unlike `Arc`, `Rc` doesn't have the same race condition to avoid, but
maintaining an equivalent API still makes it easier to work with both
`Rc` and `Arc`.
rustdoc: use restricted Damerau-Levenshtein distance for search
Based on https://github.com/rust-lang/rust/pull/108200, for the same rationale.
> This replaces the existing Levenshtein algorithm with the Damerau-Levenshtein algorithm. This means that "ab" to "ba" is one change (a transposition) instead of two (a deletion and insertion). More specifically, this is a restricted implementation, in that "ca" to "abc" cannot be performed as "ca" → "ac" → "abc", as there is an insertion in the middle of a transposition. I believe that errors like that are sufficiently rare that it's not worth taking into account.
Before this change, searching [`prinltn!`] listed `print!` first, followed by `println!`. With this change, `println!` matches more closely.
[`prinltn!`]: https://doc.rust-lang.org/nightly/std/?search=prinltn!
Check that a query has not completed and is not executing before starting it
This fixes a race in the query system where we only checked if the query was currently executing, but not if it was already completed, causing queries to re-execute.
r? `@cjgillot`
Ensure value is on the on-disk cache before returning from `ensure()`.
The current logic for `ensure()` a query just checks that the node is green in the dependency graph.
However, a lot of places use `ensure()` to prevent the query from being called later. This is the case before stealing a query result.
If the query is actually green but the value is not available in the on-disk cache, `ensure` would return, but a subsequent call to the full query would run the code, and attempt to read from a stolen value.
This PR conforms the query system to the usage by checking whether the queried value is loadable from disk before returning.
Sadly, I can't manage to craft a proper test...
Should fix all instances of "attempted to read from stolen value".
Rollup of 9 pull requests
Successful merges:
- #108726 (tidy: enforce comment blocks to have an even number of backticks)
- #108797 (Allow binary files to go through the `FileLoader`)
- #108841 (Add suggestion to diagnostic when user has array but trait wants slice. (rebased))
- #108984 (bootstrap: document tidy)
- #109013 (Give proper error message when tcx wasn't passed to decoder)
- #109017 (remove duplicated calls to sort_string)
- #109018 (Expand on the allocator comment in `rustc-main`)
- #109028 (Add eslint checks for rustdoc-js tester)
- #109034 (Commit some tests for the new solver + lazy norm)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Commit some tests for the new solver + lazy norm
Also consolidate `typeck/lazy-norm` into `traits/new-solver`, since it's not really useful to maintain a distinction, like when a test really is due to "lazy norm" or "the new solver" (usually both!)
Give proper error message when tcx wasn't passed to decoder
I hit this yesterday and found it very confusing, even though the solution to the problem is very simple.
bootstrap: document tidy
Enable documentation of tidy, as suggested in #106803. Jyn mentioned they should probably be added to `doc.rust-lang.org`, how should that be done?
Add suggestion to diagnostic when user has array but trait wants slice. (rebased)
Rebase of #91314, except for change to multipart suggestion
Resolves#90528
r? ``@compiler-errors`` since you requested the multipart suggestion
Allow binary files to go through the `FileLoader`
I'd like for `include_bytes!` to go through the `FileLoader` in an out-of-tree `rustc_driver` wrapper, and I can't find a reason it's not already done. It seems like most folks providing a custom `FileLoader` would want this too, so I added it.
I can solve my problem in other ways if there's a strong reason not to do it, but it seems simple and harmless.
tidy: enforce comment blocks to have an even number of backticks
After PR #108694, most unmatched backticks in `compiler/` comments have been eliminated. This PR adds a tidy lint to ensure no new unmatched backticks are added, and either addresses the lint in the remaining instances it found, or allows it.
Very often, backtick containing sections wrap around lines, for example:
```Rust
// This function takes a tuple `(Vec<String>,
// Box<[u8]>)` and transforms it into `Vec<u8>`.
```
The lint is implemented to work on top of blocks, counting each line with a `//` into a block, and counting if there are an odd or even number of backticks in the entire block, instead of looking at just a single line.
Avoid unnecessary hashing
I noticed some stable hashing being done in a non-incremental build. It turns out that some of this is necessary to compute the crate hash, but some of it is not. Removing the unnecessary hashing is a perf win.
r? `@cjgillot`
Simplify message paths
This makes it easier to open the messages file. Right now I have to first click on the `locales` dir to open it, and then on the `en-US.ftl` file. `Cargo.toml` and `build.rs` files are also in the top level, and I think there should not be more than one file, so a directory isn't really needed. The [chosen strategy for pontoon adoption](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/pontoon.20and.20next.20steps) is out of tree. Even if this descision is changed in the future, the `messages.ftl` approach is also compatible with non-english translations living in-tree, as long as the non-english translations don't live in the `compiler/rustc_foo/` directories but in different ones. That would also be helpful for grepability purposes.
The commit was the result of automated changes:
```
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
```
r? `@davidtwco`
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
Move dep graph methods to DepGraphData to avoid branches and `unwrap`s
This moves methods from `DepGraph` to `DepGraphData` which makes the code a bit cleaner since the dep graph is unconditionally available. It also changes `try_execute_query` to only branch on dep graph availability once, removing unnecessary branches and `unwrap`s.
This is based on https://github.com/rust-lang/rust/pull/108134 and https://github.com/rust-lang/rust/pull/108167.
Performance impact of just the last commit:
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.7354s</td><td align="right">1.7242s</td><td align="right"> -0.64%</td></tr><tr><td>🟣 <b>clap</b>:check:initial</td><td align="right">2.0813s</td><td align="right">2.0687s</td><td align="right"> -0.61%</td></tr><tr><td>🟣 <b>clap</b>:check:unchanged</td><td align="right">0.4554s</td><td align="right">0.4550s</td><td align="right"> -0.09%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2528s</td><td align="right">0.2521s</td><td align="right"> -0.27%</td></tr><tr><td>🟣 <b>hyper</b>:check:initial</td><td align="right">0.3222s</td><td align="right">0.3214s</td><td align="right"> -0.25%</td></tr><tr><td>🟣 <b>hyper</b>:check:unchanged</td><td align="right">0.1339s</td><td align="right">0.1333s</td><td align="right"> -0.38%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">0.9484s</td><td align="right">0.9455s</td><td align="right"> -0.30%</td></tr><tr><td>🟣 <b>regex</b>:check:initial</td><td align="right">1.1805s</td><td align="right">1.1727s</td><td align="right"> -0.66%</td></tr><tr><td>🟣 <b>regex</b>:check:unchanged</td><td align="right">0.3305s</td><td align="right">0.3307s</td><td align="right"> 0.08%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.5453s</td><td align="right">1.5374s</td><td align="right"> -0.51%</td></tr><tr><td>🟣 <b>syn</b>:check:initial</td><td align="right">1.9230s</td><td align="right">1.9206s</td><td align="right"> -0.12%</td></tr><tr><td>🟣 <b>syn</b>:check:unchanged</td><td align="right">0.6340s</td><td align="right">0.6333s</td><td align="right"> -0.11%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">5.8623s</td><td align="right">5.8536s</td><td align="right"> -0.15%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:initial</td><td align="right">7.2873s</td><td align="right">7.2786s</td><td align="right"> -0.12%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:unchanged</td><td align="right">1.8378s</td><td align="right">1.8478s</td><td align="right"> 0.54%</td></tr><tr><td>Total</td><td align="right">26.5300s</td><td align="right">26.4750s</td><td align="right"> -0.21%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9976s</td><td align="right"> -0.24%</td></tr></table>
r? `@cjgillot`
Unlike `Arc`, `Rc` doesn't have the same race condition to avoid, but
maintaining an equivalent API still makes it easier to work with both
`Rc` and `Arc`.
