Add `f16` and `f128` inline ASM support for `aarch64`
Adds `f16` and `f128` inline ASM support for `aarch64`. SIMD vector types are taken from [the ARM intrinsics list](https://developer.arm.com/architectures/instruction-sets/intrinsics/#f:`@navigationhierarchiesreturnbasetype=[float]&f:@navigationhierarchieselementbitsize=[16]&f:@navigationhierarchiesarchitectures=[A64]).` Based on the work of `@lengrongfu` in #127043.
Relevant issue: #125398
Tracking issue: #116909
`@rustbot` label +F-f16_and_f128
try-job: aarch64-gnu
try-job: aarch64-apple
Add Trusty OS as tier 3 target
This PR adds support for the [Trusty secure operating system](https://source.android.com/docs/security/features/trusty) as a Tier 3 supported target. This upstreams [the patch that we have been using](https://cs.android.com/android/platform/superproject/+/master:external/rust/crates/libc/patches/trusty.patch;l=1;drc=122e586e93a534160230dc10ae3474cf31dd8f7f) internally. This also revives https://github.com/rust-lang/rust/pull/103895 which was closed due to inactivity, and is being resumed now that time allows.
And MCP has already been done for adding this platform: rust-lang/compiler-team/issues/568
# Target Tier Policy Acknowledgements
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
- Nicole LeGare (``@randomPoison)``
- Stephen Crane (``@rinon)``
- As a fallback trusty-dev-team@google.com can be contacted
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
The two new Trusty targets, `aarch64-unknown-trusty` and `armv7-unknown-trusty` both follow the existing naming convention for similar targets.
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
👍
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
There are no known legal issues or license incompatibilities.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
👍
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This PR only adds the targets for the platform. `std` support will be added once platform support is added to the libc crate, which depends on the language targets being added to rustc.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
👍
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via ``@)`` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
👍
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
👍
> Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target. (Having support in a fork of the backend is not sufficient, it must be upstream.)
👍
rustc: Simplify getting sysroot library directory
It was very non-obvious that `sess.target_tlib_path`, `make_target_lib_path(...)`, and `sess.target_filesearch(...).search_paths()` result in the same sysroot library directory paths.
They are however, indeed the same, because `sess.target_tlib_path` is initialized to `make_target_lib_path(...)` on `Session` creation, and they are used interchangeably.
There are still some redundant calls to `make_target_lib_path` and other inconsistent ways to obtain sysroot directories, but fixing that requires some behavior changes, while this PR is a pure refactoring.
Some places in the compiler even disagree on the number of sysroots - 1 (explicit `--sysroot` *or* default sysroot), 2 (explicit `--sysroot` *and* default sysroot), or an unclear number of `sysroot_candidates` every of which is considered.
The logic currently using `sess.target_tlib_path` or equivalents assumes one sysroot.
miri weak memory emulation: put previous value into initial store buffer
Fixes https://github.com/rust-lang/miri/issues/2164 by doing a read before each atomic write so that we can initialize the store buffer. The read suppresses memory access hooks and UB exceptions, to avoid otherwise influencing the program behavior. If the read fails, we store that as `None` in the store buffer, so that when an atomic read races with the first atomic write to some memory and previously the memory was uninitialized, we can report UB due to reading uninit memory.
``@cbeuw`` this changes a bit the way we initialize the store buffers. Not sure if you still remember all this code, but if you could have a look to make sure this still makes sense, that would be great. :)
r? ``@saethlin``
simd_shuffle intrinsic: allow argument to be passed as vector
See https://github.com/rust-lang/rust/issues/128738 for context.
I'd like to get rid of [this hack](6c0b89dfac/compiler/rustc_codegen_ssa/src/mir/block.rs (L922-L935)). https://github.com/rust-lang/rust/pull/128537 almost lets us do that since constant SIMD vectors will then be passed as immediate arguments. However, simd_shuffle for some reason actually takes an *array* as argument, not a vector, so the hack is still required to ensure that the array becomes an immediate (which then later stages of codegen convert into a vector, as that's what LLVM needs).
This PR prepares simd_shuffle to also support a vector as the `idx` argument. Once this lands, stdarch can hopefully be updated to pass `idx` as a vector, and then support for arrays can be removed, which finally lets us get rid of that hack.
Remove `ParamMode::ExplicitNamed`
This was introduced as a hack to improve a diagnostics suggestion in #61679. It was subsequently broken, but also it was an incomplete hack that I don't believe we need to support, so let's just remove it.
Remove Duplicate E0381 Label
Aims to resolve https://github.com/rust-lang/rust/issues/129274, and adds a test for the case.
Essentially, we are duplicating this span for some reason. For now, I'm just using a set to collect the spans rather than the vec. I imagine there's probably no real reason to inspect duplicates in this area, but if I'm wrong I can adjust to collect "seen spans" in just the point where this label is applied.
I'm not sure why it's producing duplicate spans. Looks like this has been this way for a while? I think it gives the duplicate label on 1.75.0 for example.
Do not ICE on non-ADT rcvr type when looking for crate version collision
When looking for multiple versions of the same crate, do not blindly construct the receiver type.
Follow up to #128786.
Fixes#129205Fixes#129216
Document & implement the transmutation modeled by `BikeshedIntrinsicFrom`
Documents that `BikeshedIntrinsicFrom` models transmute-via-union, which is slightly more expressive than the transmute-via-cast implemented by `transmute_copy`. Additionally, we provide an implementation of transmute-via-union as a method on the `BikeshedIntrinsicFrom` trait with additional documentation on the boundary between trait invariants and caller obligations.
Whether or not transmute-via-union is the right kind of transmute to model remains up for discussion [1]. Regardless, it seems wise to document the present behavior.
[1] https://rust-lang.zulipchat.com/#narrow/stream/216762-project-safe-transmute/topic/What.20'kind'.20of.20transmute.20to.20model.3F/near/426331967
Tracking Issue: https://github.com/rust-lang/rust/issues/99571
r? `@compiler-errors`
cc `@scottmcm,` `@Lokathor`
Add `#[warn(unreachable_pub)]` to a bunch of compiler crates
By default `unreachable_pub` identifies things that need not be `pub` and tells you to make them `pub(crate)`. But sometimes those things don't need any kind of visibility. So they way I did these was to remove the visibility entirely for each thing the lint identifies, and then add `pub(crate)` back in everywhere the compiler said it was necessary. (Or occasionally `pub(super)` when context suggested that was appropriate.) Tedious, but results in more `pub` removal.
There are plenty more crates to do but this seems like enough for a first PR.
r? `@compiler-errors`
Tie `impl_trait_overcaptures` lint to Rust 2024
The `impl_trait_overcaptures` lint is part of the migration to Rust 2024 and the Lifetime Capture Rules 2024. Now that we've stabilized precise capturing (RFC 3617), let's tie this lint to the `rust_2024_compatibility` lint group.
Tracking:
- https://github.com/rust-lang/rust/issues/117587
r? `@compiler-errors`
mv `build_reduced_graph_for_external_crate_res` into Resolver
`build_reduced_graph_for_external_crate_res` is only related to `Resolver`, so move it there.
r? `@petrochenkov`
const checking: properly compute the set of transient locals
For const-checking the MIR of a const/static initializer, we have to know the set of "transient" locals. The reason for this is that creating a mutable (or interior mutable) reference to a transient local is "safe" in the sense that this reference cannot possibly end up in the final value of the const -- even if it is turned into a raw pointer and stored in a union, we will see that pointer during interning and reliably reject it as dangling.
So far, we determined the set of transient locals as "locals that have a `StorageDead` somewhere". But that's not quite right -- if we had MIR like
```rust
StorageLive(_5);
StorageDead(_5);
StorageLive(_5);
// no further storage annotations for _5
```
Then we'd consider `_5` to be "transient", but it is not actually transient.
We do not currently generate such MIR, but I feel uneasy relying on subtle invariants like this. So this PR implements a proper analysis for computing the set of "transient" locals: a local is "transient" if it is guaranteed dead at all `Return` terminators.
Cc `@cjgillot`
The `impl_trait_overcaptures` lint is part of the migration to Rust
2024 and the Lifetime Capture Rules 2024. Now that we've stabilized
precise capturing (RFC 3617), let's tie this lint to the
`rust_2024_compatibility` lint group.
add back test for stable-const-can-only-call-stable-const
This got accidentally removed in https://github.com/rust-lang/rust/pull/128596 (file `tests/ui/internal/internal-unstable-const.rs`). The test has little to do with "allow internal unstable" though, so add it in a file that already tests various const stability things.
Also tweak the help that suggests to add `rustc_allow_const_fn_unstable` to make it clear that this needs team approval, since it is a fairly big gun.
Use `FxHasher` on new solver unconditionally
r? lqd
This should actually fix the inference problem in ad855fe6db, since `HashSet::default` was not inferring the hasher when `HashSet` was coming from the stdlib due to the way that defaulted types/inference vars work. You could cherry-pick this on top of your PR alternatively.
rustdoc: clean up tuple <-> primitive conversion docs
This adds a minor missing feature to `fake_variadic`, so that it can render `impl From<(T,)> for [T; 1]` correctly.
Remove redundant flags from `lower_ty_common` that can be inferred from the HIR
...and then get rid of `lower_ty_common`.
r? ``@fmease`` or re-roll if you're busy!
Use subtyping for `UnsafeFnPointer` coercion, too
I overlooked this in #129059, which changed MIR typechecking to use subtyping for other fn pointer coercions.
Fixes#129285
Make `rustc_type_ir` build on stable
This PR fixes a handful of issues that appear in `rustc_type_ir` when trying to build the new solver on stable.
r? ```@compiler-errors```
```@bors``` rollup
library: Move unstable API of new_uninit to new features
- `new_zeroed` variants move to `new_zeroed_alloc`
- the `write` fn moves to `box_uninit_write`
The remainder will be stabilized in upcoming patches, as it was decided to only stabilize `uninit*` and `assume_init`.
Print the generic parameter along with the variance in dumps.
This allows to make sure we are testing what we think we are testing.
While the tests are correct, I discovered that opaque duplicated args are in the reverse declaration order.
Add a special case for `CStr`/`CString` in the `improper_ctypes` lint
Revives #120176. Just needed to bless a test and fix an argument, but seemed reasonable to me otherwise.
Instead of saying to "consider adding a `#[repr(C)]` or `#[repr(transparent)]` attribute to this struct", we now tell users to "Use `*const ffi::c_char` instead, and pass the value from `CStr::as_ptr()`" when the type involved is a `CStr` or a `CString`.
The suggestion is not made for `&mut CString` or `*mut CString`.
r? ``````@cjgillot`````` (since you were the reviewer of the original PR #120176, but feel free to reroll)
Detect `*` operator on `!Sized` expression
The suggestion is new:
```
error[E0277]: the size for values of type `str` cannot be known at compilation time
--> $DIR/unsized-str-in-return-expr-arg-and-local.rs:15:9
|
LL | let x = *"";
| ^ doesn't have a size known at compile-time
|
= help: the trait `Sized` is not implemented for `str`
= note: all local variables must have a statically known size
= help: unsized locals are gated as an unstable feature
help: references to `!Sized` types like `&str` are `Sized`; consider not dereferencing the expression
|
LL - let x = *"";
LL + let x = "";
|
```
Fix#128199.
