Edit rustc_span documentation
Various changes to the `rustc_span` docs, including the following:
- Additions to top-level docs
- Edits to the source_map module docs
- Edits to documentation for `Span` and `SpanData`
- Added intra-docs links
- Documentation for Levenshtein distances
- Fixed missing punctuation
Lint on redundant trailing semicolon after item
We now lint on code like this:
```rust
fn main() {
fn foo() {};
struct Bar {};
}
```
Previously, this caused warnings in Cargo, so it was disabled.
Replace pretty-print/compare/retokenize hack with targeted workarounds
Based on https://github.com/rust-lang/rust/pull/78296
cc https://github.com/rust-lang/rust/issues/43081
The 'pretty-print/compare/retokenize' hack is used to try to avoid passing an outdated `TokenStream` to a proc-macro when the underlying AST is modified in some way (e.g. cfg-stripping before derives). Unfortunately, retokenizing throws away spans (including hygiene information), which causes issues of its own. Every improvement to the accuracy of the pretty-print/retokenize comparison has resulted in non-trivial ecosystem breakage due to hygiene changes. In extreme cases, users deliberately wrote unhygienic `macro_rules!` macros (likely because they did not realize that the compiler's behavior was a bug).
Additionaly, the comparison between the original and pretty-printed/retoknized token streams comes at a non-trivial runtime cost, as shown by https://github.com/rust-lang/rust/pull/79338
This PR removes the pretty-print/compare/retokenize logic from `nt_to_tokenstream`. We only discard the original `TokenStream` under two circumstances:
* Inner attributes are used (detected by examining the AST)
* `cfg`/`cfg_attr` processing modifies the AST. This is detected by making the visitor update a flag when it performs a modification, instead of trying to detect the modification after-the-fact. Note that a 'matching' `cfg` (e.g. `#[cfg(not(FALSE)]`) does not actually get removed from the AST, allowing us to preserve the original `TokenStream`.
In all other cases, we preserve the original `TokenStream`.
This could use a bit of refactoring/renaming - opening for a Crater run.
r? `@ghost`
Before:
```
thread 'rustc' panicked at 'compiler/rustc_lint/src/context.rs:267:18: invalid lint renaming of broken_intra_doc_links to rustdoc::broken_intra_doc_links', compiler/rustc_middle/src/util/bug.rs:34:26
```
After:
```
thread 'rustc' panicked at 'src/librustdoc/core.rs:455:24: invalid lint renaming of broken_intra_doc_links to rustdoc::broken_intra_doc_links', compiler/rustc_middle/src/util/bug.rs:35:26
```
The reason I added it to `register_renamed` too is that any panic in
that function will be the caller's fault.
- Replace {} with the stringified expr
Giant thank you to `@danielhenrymantilla` for figuring out how to make
this work ❤️
- Note that this is just an approximation and it would be better to add
a doc-comment
Document `InferTy` & co.
I finally figured out what `TyVid` means! The name is quite opaque, so I
decided to document it and related types.
I don't know that much about `InferTy` & co., but I was able to *infer*
( :) ) from the names and what I know generally about type inference to
add some basic documentation.
Rollup of 11 pull requests
Successful merges:
- #79662 (Move some more code out of CodegenBackend::{codegen_crate,link})
- #79815 (Update RELEASES.md for 1.49.0)
- #80284 (Suggest fn ptr rather than fn item and suggest to use `Fn` trait bounds rather than the unique closure type in E0121)
- #80331 (Add more comments to trait queries)
- #80344 (use matches!() macro in more places)
- #80353 (BTreeMap: test split_off (and append) more thoroughly)
- #80362 (Document rustc_macros on nightly-rustc)
- #80399 (Remove FIXME in rustc_privacy)
- #80408 (Sync rustc_codegen_cranelift)
- #80411 (rustc_span: Remove `Symbol::with`)
- #80434 (bootstrap: put the component name in the tarball temp dir path)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Sync rustc_codegen_cranelift
The highlight of this sync are two JIT mode improvements. The first is that it is now possible to use JIT mode when using `-Zcodegen-backend` instead of the custom driver using `-Cllvm-args=mode=jit`. The second one is a new JIT mode that lazily compiles functions when they are called the first time: https://github.com/bjorn3/rustc_codegen_cranelift/pull/1120
In addition this includes a few small runtime performance improvements and various fixes for rustc changes that didn't cause compilation to fail.
r? ``@ghost``
``@rustbot`` label +A-codegen +A-cranelift +T-compiler
Suggest fn ptr rather than fn item and suggest to use `Fn` trait bounds rather than the unique closure type in E0121
Previously, using `_` as a return type in a function that returned a function/closure would provide a diagnostic that would cause a papercut. For example:
```rust
fn f() -> i32 { 0 }
fn fn_ptr() -> _ { f }
fn closure() -> _ { || 0 }
```
would result in this diagnostic:
```rust
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> <anon>:2:16
|
2 | fn fn_ptr() -> _ { f }
| ^
| |
| not allowed in type signatures
| help: replace with the correct return type: `fn() -> i32 {f}`
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> <anon>:3:17
|
3 | fn closure() -> _ { || 0 }
| ^
| |
| not allowed in type signatures
| help: replace with the correct return type: `[closure@<anon>:3:21: 3:25]`
error: aborting due to 2 previous errors
For more information about this error, try `rustc --explain E0121`.
```
As can be seen, it was suggested to use the function definition return type `fn() -> i32 { f }` which is not valid syntax as a return type. Additionally, closures cause a papercut as unique closure types (notated in this case as `[closure@<anon>:3:21: 3:25]`) are not valid syntax either.
Instead, this PR implements this version of the diagnostic (this example is for the same code featured above):
```rust
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> <anon>:2:16
|
2 | fn fn_ptr() -> _ { f }
| ^
| |
| not allowed in type signatures
| help: replace with the correct return type: `fn() -> i32`
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> <anon>:3:17
|
3 | fn closure() -> _ { || 0 }
| ^ not allowed in type signatures
|
= help: consider using an `Fn`, `FnMut`, or `FnOnce` trait bound
= note: for more information on `Fn` traits and closure types, see https://doc.rust-lang.org/book/ch13-01-closures.html
error: aborting due to 2 previous errors
For more information about this error, try `rustc --explain E0121`.
```
As can be seen in this diagnostic, the papercut for returning a function item is fixed by suggesting the usage of a function pointer as the return type. As for closures, it's suggested to use an `Fn`, `FnMut`, or `FnOnce` trait bound (with further reading on closures and `Fn` traits in *The Book* for beginners). I did not implement a suggestion to use `impl Fn() -> i32` syntax as that was out-of-scope for my abilities at the moment, therefore someone in the future may want to implement that. Also, it's possible to use either `impl Trait` syntax, generics, or generics with a `where` clause, and some users may not want to use `impl Trait` syntax for their own reasons.
This PR fixes#80179.
Prevent caching normalization results with a cycle
When normalizing a projection which results in a cycle, we would cache the result of `project_type` without the nested obligations (because they're not needed for inference). This would result in the nested obligations only being handled once in fulfill, which would avoid the cycle error. `get_paranoid_cache_value_obligation` used to add an obligation that resulted in a cycle in this case previously, but was removed by #73905.
This PR makes the projection cache not cache the value of a projection if it was ever normalized in a cycle (except in a snapshot that's rolled back).
Fixes#79714.
r? `@nikomatsakis`
Various changes to the `rustc_span` docs, including the following:
- Additions to top-level docs
- Edits to the source_map module docs
- Edits to documentation for `Span` and `SpanData`
- Added intra-docs links
- Documentation for Levenshtein distances
- Fixed missing punctuation
validate promoteds
Turn on const-value validation for promoteds. This is made possible now that https://github.com/rust-lang/rust/issues/67534 is resolved.
I don't think this is a breaking change. We don't promote any unsafe operation any more (since https://github.com/rust-lang/rust/pull/77526 landed). We *do* promote `const fn` calls under some circumstances (in `const`/`static` initializers), but union field access and similar operations are not allowed in `const fn`. So now is a perfect time to add this check. :D
r? `@oli-obk`
Fixes https://github.com/rust-lang/rust/issues/67465
Exclude unnecessary info from CodegenResults
`foreign_module` and `wasm_import_module` are not needed for linking, and hence can be removed from CodegenResults.
Fixes#77857
Rename rustc_middle::lint::LintSource
Rename [`rustc_middle::lint::LintSource`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/lint/enum.LintSource.html) to `rustc_middle::lint::LintLevelSource`.
This enum represents the source of a *lint level*, not a lint. This should improve code readability.
Update: Also documents `rustc_middle::lint::LevelSource` to clarify.
Implemented a compiler diagnostic for move async mistake
Fixes#79694
First time contributing, so I hope I'm doing everything right.
(If not, please correct me!)
This code performs a check when a move capture clause is parsed. The check is to detect if the user has reversed the async move keywords and to provide a diagnostic with a suggestion to fix it.
Checked code:
```rust
fn main() {
move async { };
}
```
Previous output:
```txt
PS C:\Repos\move_async_test> cargo build
Compiling move_async_test v0.1.0 (C:\Repos\move_async_test)
error: expected one of `|` or `||`, found keyword `async`
--> src\main.rs:2:10
|
2 | move async { };
| ^^^^^ expected one of `|` or `||`
error: aborting due to previous error
error: could not compile `move_async_test`
```
New output:
```txt
PS C:\Repos\move_async_test> cargo +dev build
Compiling move_async_test v0.1.0 (C:\Repos\move_async_test)
error: the order of `move` and `async` is incorrect
--> src\main.rs:2:13
|
2 | let _ = move async { };
| ^^^^^^^^^^
|
help: try switching the order
|
2 | let _ = async move { };
| ^^^^^^^^^^
error: aborting due to previous error
error: could not compile `move_async_test`
```
Is there a file/module where these kind of things are tested?
Would love some feedback 😄
Remap instrument-coverage line numbers in doctests
This uses the `SourceMap::doctest_offset_line` method to re-map line
numbers from doctests. Remapping columns is not yet done, and rustdoc
still does not output the correct filename when running doctests in a
workspace.
Part of #79417 although I dont consider that fixed until both filenames
and columns are mapped correctly.
r? `@richkadel`
I might jump on zulip the comming days. Still need to figure out how to properly write tests for this, and deal with other doctest issues in the meantime.
Rework beautify_doc_string so that it returns a Symbol instead of a String
This commit comes from https://github.com/rust-lang/rust/pull/80261, the goal here is to inspect the impact on performance of this change on its own.
The idea of rewriting `beautify_doc_string` is to not go through `String` if we don't need to update the doc comment to be able to keep the original `Symbol` and also to have better performance.
r? `@jyn514`
rustc_query_system: reduce dependency graph memory usage
This change implements, at a high level, two space optimizations to the dependency graph.
The first optimization is sharing graph data with the previous dependency graph. Whenever we intern a node, we know whether that node is new (not in the previous graph) or not, and if not, the color of the node in the previous graph.
Red and green nodes have their `DepNode` present in the previous graph, so for that piece of node data, we can just store the index of the node in the previous graph rather than duplicate the `DepNode`. Green nodes additionally have the the same result `Fingerprint`, so we can avoid duplicating that too. Finally, we distinguish between "light" and "dark" green nodes, where the latter are nodes that were marked green because all of their dependencies were marked green. These nodes can additionally share edges with the previous graph, because we know that their set of dependencies is the same (technically, light green and red nodes can have the same dependencies too, but we don't try to figure out whether or not that's the case).
Also, some effort is made to pack data tightly, and to avoid storing `DepNode`s as map keys more than once.
The second optimization is storing edges in a more compact representation, as in the `SerializedDepGraph`, that is, in a single vector, rather than one `EdgesVec` per node. An `EdgesVec` is a `SmallVec` with an inline buffer for 8 elements. Each `EdgesVec` is, at minimum, 40 bytes, and has a per-node overhead of up to 40 bytes. In the ideal case of exactly 8 edges, then 32 bytes are used for edges, and the overhead is 8 bytes. But most of the time, the overhead is higher.
In contrast, using a single vector to store all edges, and having each node specify its start and end elements as 4 byte indices into the vector has a constant overhead of 8 bytes--the best case scenario for the per-node `EdgesVec` approach.
The downside of this approach is that `EdgesVec`s built up during query execution have to be copied into the vector, whereas before, we could just take ownership over them. However, we mostly make up for this because the single vector representation enables a more efficient implementation of `DepGraph::serialize`.
These docs were very out of date and misleading. They even said that
they codegen'd the *AST*!
For some reason, the `rustc_codegen_ssa::base` docs were exactly
identical to the `rustc_codegen_llvm::base` docs. They didn't really
make sense, because they had LLVM-specific information even though
`rustc_codegen_ssa` is supposed to be somewhat generic. So I removed
them as they were misleading.
Turn helper method into a closure
`replace_prefix` is currently implemented as a method but has no real relation
to the struct it is implemented on. Turn it into a closure and move it into the
only method from which it is called.
`@rustbot` modify labels +C-cleanup +T-compiler
r? `@lcnr`
rustc_span: Provide a reserved identifier check for a specific edition
while keeping edition evaluation lazy because it may be expensive.
Needed for https://github.com/rust-lang/rust/pull/80226.
Add module-level docs to rustc_middle::ty
I thought it would be nice to point out `Ty` and `TyCtxt` on the module page, and link out to the [rustc-dev-guide chapter](https://rustc-dev-guide.rust-lang.org/ty.html).
docs: Edit rustc_middle::ty::query::on_disk_cache
Expand abbreviations for "incremental compliation".
Also added the word "to" to the description of CacheEncoder.
Reduce memory consumption by sharing the previous dependency graph's
edges with the current graph when it is known to be valid to do so. It
is known to be valid whenever we mark a node green because all of its
dependencies were green. It is *not* known to be valid when we mark a
node green because we re-executed its query and its result was the same
as in the previous compilation session. In that case, the dependency set
might have changed (we don't try to determine whether or not it changed
and whether or not we can share).
Reduce memory consumption by taking advantage of red/green algorithm
properties to share the previous dependency graph's node data with the
current graph instead of storing node data redundantly. Red nodes can
share the `DepNode`, and green nodes can share the `DepNode` and
`Fingerprint`. Edges will be shared when possible in a later change.
Clarify constructor splitting in exhaustiveness checking
I reworked the explanation of the algorithm completely to make it properly account for the various extensions we've added. This includes constructor splitting, which was previously not clearly included in the algorithm. This makes wildcards less magical; I added some detailed examples; and this distinguishes clearly between constructors that only make sense in patterns (like ranges) and those that make sense for values (like `Some`). This reformulation had been floating around in my mind for a while, and I'm quite happy with how it turned out. Let me know how you feel about it.
I also factored out all three cases of splitting (wildcards, ranges and slices) into dedicated structs to encapsulate the complicated bits.
I measured no perf impact but I don't trust my local measurements for refactors since https://github.com/rust-lang/rust/pull/79284.
r? `@varkor`
`@rustbot` modify labels: +A-exhaustiveness-checking
rustc_query_system: explicitly register reused dep nodes
Register nodes that we've reused from the previous session explicitly
with `OnDiskCache`. Previously, we relied on this happening as a side
effect of accessing the nodes in the `PreviousDepGraph`. For the sake of
performance and avoiding unintended side effects, register explictily.
`replace_prefix` is currently implemented as a method but has no real relation
to the struct it is implemented on. Turn it into a closure and move it into the
only method from which it is called.
Rename `overlapping_patterns` lint
As discussed in https://github.com/rust-lang/rust/issues/65477. I also tweaked a few things along the way.
r? `@varkor`
`@rustbot` modify labels: +A-exhaustiveness-checking
Reserve necessary space for params in generics_of
Always reserve space for the exact number of generic parameters we need in generics_of. As far as I can see, the default is 0/4 elements based on has_self, and the vector grows on after that.
Acknowledge that `[CONST; N]` is stable
When `const_in_array_repeat_expressions` (RFC 2203) got unstably implemented as part of https://github.com/rust-lang/rust/pull/61749, accidentally, the special case of repeating a *constant* got stabilized immediately. That is why the following code works on stable:
```rust
const EMPTY: Vec<i32> = Vec::new();
pub const fn bar() -> [Vec<i32>; 2] {
[EMPTY; 2]
}
fn main() {
let x = bar();
}
```
In contrast, if we had written `[expr; 2]` for some expression that is not *literally* a constant but could be evaluated at compile-time (e.g. `(EMPTY,).0`), this would have failed.
We could take back this stabilization as it was clearly accidental. However, I propose we instead just officially accept this and stabilize a small subset of RFC 2203, while leaving the more complex case of general expressions that could be evaluated at compile-time unstable. Making that case work well is pretty much blocked on inline `const` expressions (to avoid relying too much on [implicit promotion](https://github.com/rust-lang/const-eval/blob/master/promotion.md)), so it could take a bit until it comes to full fruition. `[CONST; N]` is an uncontroversial subset of this feature that has no semantic ambiguities, does not rely on promotion, and basically provides the full expressive power of RFC 2203 but without the convenience (people have to define constants to repeat them, possibly using associated consts if generics are involved).
Well, I said "no semantic ambiguities", that is only almost true... the one point I am not sure about is `[CONST; 0]`. There are two possible behaviors here: either this is equivalent to `let x = CONST; [x; 0]`, or it is a NOP (if we argue that the constant is never actually instantiated). The difference between the two is that if `CONST` has a destructor, it should run in the former case (but currently doesn't, due to https://github.com/rust-lang/rust/issues/74836); but should not run if it is considered a NOP. For regular `[x; 0]` there seems to be consensus on running drop (there isn't really an alternative); any opinions for the `CONST` special case? Should this instantiate the const only to immediately run its destructors? That seems somewhat silly to me. After all, the `let`-expansion does *not* work in general, for `N > 1`.
Cc `@rust-lang/lang` `@rust-lang/wg-const-eval`
Cc https://github.com/rust-lang/rust/issues/49147
Ran the tidy check
Following the diagnostic guide better
Diagnostic generation is now relegated to its own function in the diagnostics module.
Added tests
Fixed the ui test
Fix pretty printing an AST representing `&(mut ident)`
The PR fixes a misguiding help diagnostic in the parser that I reported in #80186. I discovered that the parsers recovery and reporting logic was correct but the pretty printer produced wrong code for the example. (Details in https://github.com/rust-lang/rust/issues/80186#issuecomment-748498676)
Example:
```rust
#![allow(unused_variables)]
fn main() {
let mut &x = &0;
}
```
The AST fragment
`PatKind::Ref(PatKind::Ident(BindingMode::ByValue(Mutability::Mut), ..), Mutability::Not)`
was printed to be `&mut ident`. But this wouldn't round trip through parsing again, because then it would be:
`PatKind::Ref(PatKind::Ident(BindingMode::ByValue(Mutability::Not), ..), Mutability::Mut)`
Now the pretty-printer prints `&(mut ident)`. Reparsing that code results in the AST fragment
`PatKind::Ref(PatKind::Paren(PatKind::Ident(BindingMode::ByValue(Mutability::Mut), ..)), Mutability::Not)`
which I think should behave like the original pattern.
Old diagnostic:
```
error: `mut` must be attached to each individual binding
--> src/main.rs:3:9
|
3 | let mut &x = &0;
| ^^^^^^ help: add `mut` to each binding: `&mut x`
|
= note: `mut` may be followed by `variable` and `variable @ pattern`
```
New diagnostic:
```
error: `mut` must be attached to each individual binding
--> src/main.rs:3:9
|
3 | let mut &x = &0;
| ^^^^^^ help: add `mut` to each binding: `&(mut x)`
|
= note: `mut` may be followed by `variable` and `variable @ pattern`
```
Fixes#80186
Minor cleanups in LateResolver
- Avoid calculating hash twice
- Avoid creating a closure in every iteration of a loop
- Reserve space for path in advance
- Some readability changes
Handle desugaring in impl trait bound suggestion
Fixes#79843.
When an associated type of a generic function parameter needs extra bounds, the diagnostics may suggest replacing an `impl Trait` with a named type parameter so that it can be referenced in the where clause. On stable and nightly, the suggestion can be malformed, for instance transforming:
```rust
async fn run(_: &(), foo: impl Foo) -> std::io::Result<()>
```
Into:
```rust
async fn run(_: &, F: Foo(), foo: F) -> std::io::Result<()> where <F as Foo>::Bar: Send
^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^
```
Where we want something like:
```rust
async fn run<F: Foo>(_: &(), foo: F) -> std::io::Result<()> where <F as Foo>::Bar: Send
^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^
```
The problem is that the elided lifetime of `&()` is added as a generic parameter when desugaring the async fn; the suggestion code sees this as an existing generic parameter and tries to use its span as an anchor to inject `F` into the parameter list. There doesn't seem to be an entirely principled way to check which generic parameters in the HIR were explicitly named in the source, so this commit changes the heuristics when generating the suggestion to only consider type parameters whose spans are contained within the span of the `Generics` when determining how to insert an additional type parameter into the declaration. (And to be safe it also excludes parameters whose spans are marked as originating from desugaring, although that doesn't seem to handle this elided lifetime.)
Edit rustc_middle docs
Re-word doc comment for rustc_middle::hir::place::Projection.
Also adds:
- Missing end stop punctuation, and
- Documentation links to `rustc_middle::mir::Place`.
When normalizing a projection which results in a cycle, we would
cache the result of `project_type` without the nested obligations
(because they're not needed for inference). This would result in
the nested obligations only being handled once in fulfill, which
would avoid the cycle error.
Fixes#79714, a regresion from #79305 caused by the removal of
`get_paranoid_cache_value_obligation`.
Turn quadratic time on number of impl blocks into linear time
Previously, if you had a lot of inherent impl blocks on a type like:
```Rust
struct Foo;
impl Foo { fn foo_1() {} }
// ...
impl Foo { fn foo_100_000() {} }
```
The compiler would be very slow at processing it, because
an internal algorithm would run in O(n^2), where n is the number
of impl blocks. Now, we add a new algorithm that allocates but
is faster asymptotically.
Comparing rustc nightly with a local build of rustc as of this PR (results in seconds):
| N | real time before | real time after |
| - | - | - |
| 4_000 | 0.57 | 0.46 |
| 8_000 | 1.31 | 0.84 |
| 16_000 | 3.56 | 1.69 |
| 32_000 | 10.60 | 3.73 |
I've tuned up the numbers to make the effect larger than the startup noise of rustc, but the asymptotic difference should hold for smaller n as well.
Note: current state of the PR omits error messages if there are other errors present already. For now, I'm mainly interested in a perf run to study whether this issue is present at all. Please queue one for this PR. Thanks!
Re-word doc comment for rustc_middle::hir::place::Projection.
Also adds:
- Missing end stop punctuation, and
- Documentation links to `rustc_middle::mir::Place`.
`PatKind::Ref(PatKind::Ident(BindingMode::ByValue(Mutability::Mut), ..), ..)`
is an AST representing `&(mut ident)`. It was errorneously printed as
`&mut ident` which reparsed into a syntactically different AST.
This affected help diagnostics in the parser.
Make BoundRegion have a kind of BoungRegionKind
Split from #76814
Also includes making `replace_escaping_bound_vars` only return `T`
Going to r? `@lcnr`
Feel free to reassign
or_patterns: implement :pat edition-specific behavior
cc #54883 `@joshtriplett`
This PR implements the edition-specific behavior of `:pat` wrt or-patterns, as determined by the crater runs and T-lang consensus in https://github.com/rust-lang/rust/issues/54883#issuecomment-745509090.
I believe this can unblock stabilization of or_patterns.
r? `@petrochenkov`
const_evaluatable_checked: fix occurs check
fixes#79615
this is kind of a hack because we use `TypeRelation` for both the `Generalizer` and the `ConstInferUnifier` but i am not sure if there is a useful way to disentangle this without unnecessarily duplicating some code.
The error in the added test is kind of unavoidable until we erase the unused substs of `ConstKind::Unevaluated`. We talked a bit about this in the cg lazy norm meeting (https://rust-lang.zulipchat.com/#narrow/stream/260443-project-const-generics/topic/lazy_normalization_consts)
For
struct X<T: ?Sized>(T)
struct Y<T: ?Sized>(u8, T)
the offset of the unsized field is
0
mem::align_of_val(&self.1)
respectively. This patch changes the expression used to compute these
offsets so that the optimizer can perform this optimization.
Consider
```rust
fn test(x: &X<dyn Any>) -> &dyn Any {
&x.0
}
```
Before:
```asm
test:
movq %rsi, %rdx
movq 16(%rsi), %rax
leaq -1(%rax), %rcx
negq %rax
andq %rcx, %rax
addq %rdi, %rax
retq
```
After:
```asm
test:
movq %rsi, %rdx
movq %rdi, %rax
retq
```
Improve and fix diagnostics of exhaustiveness checking
Primarily, this fixes https://github.com/rust-lang/rust/issues/56379. This also fixes incorrect interactions between or-patterns and slice patterns that I discovered while working on #56379. Those two examples show the incorrect diagnostics:
```rust
match &[][..] {
[true] => {}
[true // detected as unreachable but that's not true
| false, ..] => {}
_ => {}
}
match (true, None) {
(true, Some(_)) => {}
(false, Some(true)) => {}
(true | false, None | Some(true // should be detected as unreachable
| false)) => {}
}
```
I did not measure any perf impact. However, I suspect that [`616ba9f`](616ba9f9f7) should have a negative impact on large or-patterns. I'll see what the perf run says; I have optimization ideas up my sleeve if needed.
EDIT: I initially had a noticeable perf impact that I thought unavoidable. I then proceeded to avoid it x)
r? `@varkor`
`@rustbot` label +A-exhaustiveness-checking
Stabilize or_insert_with_key
Stabilizes the `or_insert_with_key` feature from https://github.com/rust-lang/rust/issues/71024. This allows inserting key-derived values when a `HashMap`/`BTreeMap` entry is vacant.
The difference between this and `.or_insert_with(|| ... )` is that this provides a reference to the key to the closure after it is moved with `.entry(key_being_moved)`, avoiding the need to copy or clone the key.
passes: prohibit invalid attrs on generic params
Fixes#78957.
This PR modifies the `check_attr` pass so that attribute placement on generic parameters is checked for validity.
r? `@lcnr`
Register nodes that we've reused from the previous session explicitly
with `OnDiskCache`. Previously, we relied on this happening as a side
effect of accessing the nodes in the `PreviousDepGraph`. For the sake of
performance and avoiding unintended side effects, register explictily.
This is elegant but a bit of a perf gamble. That said, or-patterns
rarely have many branches and it's easy to optimize or revert if we ever
need to. In the meantime simpler code is worth it.
Stop using intermediate macros in definition of symbols
Currently, the rustc_macros::symbols macro generates two
`macro_rules!` macros as its output. These two macros are
used in rustc_span/src/symbol.rs.
This means that each Symbol that we define is represented
in the AST of rustc_symbols twice: once in the definition
of the `define_symbols!` macro (similarly for the
`keywords! macro), and once in the rustc_span::symbols
definition.
That would be OK if there were only a handful of symbols,
but currently we define over 1100 symbols. The definition
of the `define_symbols!` macro contains the expanded definition
of each symbol, so that's a lot of AST storage wasted on a
macro that is used exactly once.
This commit removes the `define_symbols` macro, and simply
allows the proc macro to directly generate the
`rustc_symbols::symbol::sym` module.
The benefit is mainly in reducing memory wasted during
compilation of rustc itself. It should also reduce memory used
by Rust Analyzer.
This commit also reduces the size of the AST for symbol
definitions, by moving two `#[allow(...)]` attributes from
the symbol constants to the `sym` module. This eliminates 2200+
attribute nodes.
This commit also eliminates the need for the `digits_array`
constant. There's no need to store an array of Symbol values
for digits. We can simply define a constant of the base value,
and add to that base value.
I left the `sym::integer` function in rustc_span/src/symbol.rs
instead of moving it into rustc_macros/src/symbols.rs for two
reasons. First, because it's human-written code; it doesn't need
to be generated by the proc-macro. Second, because I didn't want
the `#[allow(...)]` attributes that I moved to the `sym` module
scope to apply to this function. The `sym` module re-exports the
`integer` function from its parent module.
Rollup of 5 pull requests
Successful merges:
- #78164 (Prefer regions with an `external_name` in `approx_universal_upper_bound`)
- #80003 (Fix overflow when converting ZST Vec to VecDeque)
- #80023 (Enhance error message when misspelled label to value in break expression)
- #80046 (Add more documentation to `Diagnostic` and `DiagnosticBuilder`)
- #80109 (Remove redundant and unreliable coverage test results)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Prefer regions with an `external_name` in `approx_universal_upper_bound`
Fixes#75785
When displaying a MIR borrowcheck error, we may need to find an upper
bound for a region, which gives us a region to point to in the error
message. However, a region might outlive multiple distinct universal
regions, in which case the only upper bound is 'static
To try to display a meaningful error message, we compute an
'approximate' upper bound by picking one of the universal regions.
Currently, we pick the region with the lowest index - however, this
caused us to produce a suboptimal error message in issue #75785
This PR `approx_universal_upper_bound` to prefer regions with an
`external_name`. This causes us to prefer regions from function
arguments/upvars, which seems to lead to a nicer error message in some
cases.
Currently, the rustc_macros::symbols macro generates two
`macro_rules!` macros as its output. These two macros are
used in rustc_span/src/symbol.rs.
This means that each Symbol that we define is represented
in the AST of rustc_symbols twice: once in the definition
of the `define_symbols!` macro (similarly for the
`keywords! macro), and once in the rustc_span::symbols
definition.
That would be OK if there were only a handful of symbols,
but currently we define over 1100 symbols. The definition
of the `define_symbols!` macro contains the expanded definition
of each symbol, so that's a lot of AST storage wasted on a
macro that is used exactly once.
This commit removes the `define_symbols` macro, and simply
allows the proc macro to directly generate the
`rustc_symbols::symbol::sym` module.
The benefit is mainly in reducing memory wasted during
compilation of rustc itself. It should also reduce memory used
by Rust Analyzer.
This commit also reduces the size of the AST for symbol
definitions, by moving two `#[allow(...)]` attributes from
the symbol constants to the `sym` module. This eliminates 2200+
attribute nodes.
This commit also eliminates the need for the `digits_array`
constant. There's no need to store an array of Symbol values
for digits. We can simply define a constant of the base value,
and add to that base value.
Fixes#75785
When displaying a MIR borrowcheck error, we may need to find an upper
bound for a region, which gives us a region to point to in the error
message. However, a region might outlive multiple distinct universal
regions, in which case the only upper bound is 'static
To try to display a meaningful error message, we compute an
'approximate' upper bound by picking one of the universal regions.
Currently, we pick the region with the lowest index - however, this
caused us to produce a suboptimal error message in issue #75785
This PR `approx_universal_upper_bound` to prefer regions with an
`external_name`. This causes us to prefer regions from function
arguments/upvars, which seems to lead to a nicer error message in some
cases.
Move binder for dyn to each list item
This essentially changes `ty::Binder<&'tcx List<ExistentialTraitRef>>` to `&'tcx List<ty::Binder<ExistentialTraitRef>>`.
This is a first step in moving the `dyn Trait` representation closer to Chalk, which we've talked about in `@rust-lang/wg-traits.`
r? `@nikomatsakis`
Always run intrinsics lowering pass
Move intrinsics lowering pass from the optimization phase (where it
would not run if -Zmir-opt-level=0), to the drop lowering phase where it
runs unconditionally.
The implementation of those intrinsics in code generation and
interpreter is unnecessary. Remove it.
Fixed conflict with drop elaboration and coverage
See
https://github.com/rust-lang/rust/issues/80045#issuecomment-745733339
Coverage statements are moved to the beginning of the BCB. This does
also affect what's counted before a panic, changing some results, but I
think these results may even be preferred? In any case, there are no
guarantees about what's counted when a panic occurs (by design).
r? `@tmandry`
FYI `@wesleywiser` `@ecstatic-morse`
Fix issue #78496
EarlyOtherwiseBranch finds MIR structures like:
```
bb0: {
...
_2 = discriminant(X)
...
switchInt(_2) -> [1_isize: bb1, otherwise: bb3]
}
bb1: {
...
_3 = discriminant(Y)
...
switchInt(_3) -> [1_isize: bb2, otherwise: bb3]
}
bb2: {...}
bb3: {...}
```
And transforms them into something like:
```
bb0: {
...
_2 = discriminant(X)
_3 = discriminant(Y)
_4 = Eq(_2, _3)
switchInt(_4) -> [true: bb4, otherwise: bb3]
}
bb2: {...} // unchanged
bb3: {...} // unchanged
bb4: {
switchInt(_2) -> [1_isize: bb2, otherwise: bb3]
}
```
But that is not always a safe thing to do -- sometimes the early `otherwise` branch is necessary so the later block could assume the value of `discriminant(X)`.
I am not totally sure what's the best way to detect that, but fixing #78496 should be easy -- we just check if `X` is a sub-expression of `Y`. A more precise test might be to check if `Y` contains a `Downcast(1)` of `X`, but I think this might be good enough.
Fix#78496
Allow `since="TBD"` for rustc_deprecated
Closes#78381.
This PR only affects `#[rustc_deprecated]`, not `#[deprecated]`, so there is no effect on any stable language feature.
Likewise this PR only implements `since="TBD"`, it does not actually tag any library functions with it, so there is no effect on any stable API.
Overview of changes:
* `rustc_middle/stability.rs`:
* change `deprecation_in_effect` function to return `false` when `since="TBD"`
* tidy up the compiler output when a deprecated item has `since="TBD"`
* `rustc_passes/stability.rs`:
* allow `since="TBD"` to pass the sanity check for stable_version < deprecated_version
* refactor the "invalid stability version" and "invalid deprecation version" error into separate errors
* rustdoc: make `since="TBD"` message on a deprecated item's page match the command-line deprecation output
* tests:
* test rustdoc output
* test that the `deprecated_in_future` lint fires when `since="TBD"`
* test the new "invalid deprecation version" error message
Implement if-let match guards
Implements rust-lang/rfcs#2294 (tracking issue: #51114).
I probably should do a few more things before this can be merged:
- [x] Add tests (added basic tests, more advanced tests could be done in the future?)
- [x] Add lint for exhaustive if-let guard (comparable to normal if-let statements)
- [x] Fix clippy
However since this is a nightly feature maybe it's fine to land this and do those steps in follow-up PRs.
Thanks a lot `@matthewjasper` ❤️ for helping me with lowering to MIR! Would you be interested in reviewing this?
r? `@ghost` for now
Take into account negative impls in "trait item not found" suggestions
This removes the suggestion to implement a trait for a type when that type already has a negative implementation for the trait, and replaces it with a note to point out that the trait is explicitely unimplemented, as suggested by `@scottmcm.`
Helps with #79683.
r? `@scottmcm` do you want to review this?
llvm-dwp concatenates `DW_AT_comp_dir` with `DW_AT_GNU_dwo_name` (only
when `DW_AT_comp_dir` exists), which can result in it failing to find
the DWARF object files.
In earlier testing, `DW_AT_comp_dir` wasn't present in the final
object and the current directory was the output directory.
When running tests through compiletest, the working directory of the
compilation is different from output directory and that resulted in
`DW_AT_comp_dir` being in the object file (and set to the current
working directory, rather than the output directory), and
`DW_AT_GNU_dwo_name` being set to the full path (rather than just
the filename), so llvm-dwp was failing.
This commit changes the compilation directory provided to LLVM to match
the output directory, where DWARF objects are output; and ensures that
only the filename is used for `DW_AT_GNU_dwo_name`.
Signed-off-by: David Wood <david@davidtw.co>
This commit adds a Split DWARF compare mode to compiletest so that
debuginfo tests are also tested using Split DWARF in split mode (and
manually in single mode).
Signed-off-by: David Wood <david@davidtw.co>
This commit makes minor changes to the cranelift backend so that it can
build given changes in cg_ssa for Split DWARF.
Signed-off-by: David Wood <david@davidtw.co>
This commit implements Split DWARF support, wiring up the flag (added in
earlier commits) to the modified FFI wrapper (also from earlier
commits).
Signed-off-by: David Wood <david@davidtw.co>
This commit removes the `TargetMachineFactory` struct and adds a
`TargetMachineFactoryFn` type alias which is used everywhere that the
previous, long type was used.
Signed-off-by: David Wood <david@davidtw.co>
This commit changes some comments to documentation comments so that
they can be read on the generated rustdoc.
Signed-off-by: David Wood <david@davidtw.co>
This commit modifies the FFI bindings to LLVM required for Split DWARF
support in rustc. In particular:
- `addPassesToEmitFile`'s wrapper, `LLVMRustWriteOutputFile` now takes
a `DwoPath` `const char*`. When disabled, `nullptr` should be provided
which will preserve existing behaviour. When enabled, the path to the
`.dwo` file should be provided.
- `createCompileUnit`'s wrapper, `LLVMRustDIBuilderCreateCompileUnit`
now has two additional arguments, for the `DWOId` and to enable
`SplitDebugInlining`. `DWOId` should always be zero.
- `createTargetMachine`'s wrapper, `LLVMRustCreateTargetMachine` has an
additional argument which should be provided the path to the `.dwo`
when enabled.
Signed-off-by: David Wood <david@davidtw.co>
See
https://github.com/rust-lang/rust/issues/80045#issuecomment-745733339
Coverage statements are moved to the beginning of the BCB. This does
also affect what's counted before a panic, changing some results, but I
think these results may even be preferred? In any case, there are no
guarantees about what's counted when a panic occurs (by design).
make MIR graphviz generation use gsgdt
gsgdt [https://crates.io/crates/gsgdt] is a crate which provides an
interface for stringly typed graphs. It also provides generation of
graphviz dot format from said graph.
This is the first in a series of PRs on moving graphviz code out of rustc into normal crates and then implementating graph diffing on top of these crates.
r? `@oli-obk`
[rustdoc] Switch to Symbol for item.name
This decreases the size of `Item` from 680 to 616 bytes. It also does a
lot less work since it no longer has to copy as much.
Helps with #79103.
r? `@GuillaumeGomez`
Fixes reported bugs in Rust Coverage
Fixes: #79569Fixes: #79566Fixes: #79565
For the first issue (#79569), I got hit a `debug_assert!()` before
encountering the reported error message (because I have `debug = true`
enabled in my config.toml).
The assertion showed me that some `SwitchInt`s can have more than one
target pointing to the same `BasicBlock`.
I had thought that was invalid, but since it seems to be possible, I'm
allowing this now.
I added a new test for this.
----
In the last two cases above, both tests (intentionally) fail to compile,
but the `InstrumentCoverage` pass is invoked anyway.
The MIR starts with an `Unreachable` `BasicBlock`, which I hadn't
encountered before. (I had assumed the `InstrumentCoverage` pass
would only be invoked with MIRs from successful compilations.)
I don't have test infrastructure set up to test coverage on files that
fail to compile, so I didn't add a new test.
r? `@tmandry`
FYI: `@wesleywiser`
consider assignments of union field of ManuallyDrop type safe
Assigning to `Copy` union fields is safe because that assignment will never drop anything. However, with https://github.com/rust-lang/rust/pull/77547, unions may also have `ManuallyDrop` fields, and their assignments are currently still unsafe. That seems unnecessary though, as assigning `ManuallyDrop` does not drop anything either, and is thus safe even for union fields.
I assume this will at least require FCP.
[mir-opt] Allow debuginfo to be generated for a constant or a Place
Prior to this commit, debuginfo was always generated by mapping a name
to a Place. This has the side-effect that `SimplifyLocals` cannot remove
locals that are only used for debuginfo because their other uses have
been const-propagated.
To allow these locals to be removed, we now allow debuginfo to point to
a constant value. The `ConstProp` pass detects when debuginfo points to
a local with a known constant value and replaces it with the value. This
allows the later `SimplifyLocals` pass to remove the local.
Move intrinsics lowering pass from the optimization phase (where it
would not run if -Zmir-opt-level=0), to the drop lowering phase where it
runs unconditionally.
The implementation of those intrinsics in code generation and
interpreter is unnecessary. Remove it.
Adds checks for:
* `no_core` attribute
* explicitly-enabled `legacy` symbol mangling
* mir_opt_level > 1 (which enables inlining)
I removed code from the `Inline` MIR pass that forcibly disabled
inlining if `-Zinstrument-coverage` was set. The default `mir_opt_level`
does not enable inlining anyway. But if the level is explicitly set and
is greater than 1, I issue a warning.
The new warnings show up in tests, which is much better for diagnosing
potential option conflicts in these cases.
Improve error handling in `symbols` proc-macro
This improves how the `symbols` proc-macro handles errors.
If it finds an error in its input, the macro does not panic.
Instead, it still produces an output token stream. That token
stream will contain `compile_error!(...)` macro invocations.
This will still cause compilation to fail (which is what we want),
but it will prevent meaningless errors caused by the output not
containing symbols that the macro normally generates.
This solves a small (but annoying) problem. When you're editing
rustc_span/src/symbol.rs, and you get something wrong (dup
symbol name, misordered symbol), you want to get only the errors
that are relevant, not a burst of errors that are irrelevant.
This change also uses the correct Span when reporting errors,
so you get errors that point to the correct place in
rustc_span/src/symbol.rs where something is wrong.
This also adds several unit tests which test the `symbols` proc-macro.
This commit also makes it easy to run the `symbols` proc-macro
as an ordinary Cargo test. Just run `cargo test`. This makes it
easier to do development on the macro itself, such as running it
under a debugger.
This commit also uses the `Punctuated` type in `syn` for parsing
comma-separated lists, rather than doing it manually.
The output of the macro is not changed at all by this commit,
so rustc should be completely unchanged. This just improves
quality of life during development.
Properly capture trailing 'unglued' token
If we try to capture the `Vec<u8>` in `Option<Vec<u8>>`, we'll
need to capture a `>` token which was 'unglued' from a `>>` token.
The processing of unglueing a token for parsing purposes bypasses the
usual capturing infrastructure, so we currently lose the trailing `>`.
As a result, we fall back to the reparsed `TokenStream`, causing us to
lose spans.
This commit makes token capturing keep track of a trailing 'unglued'
token. Note that we don't need to care about unglueing except at the end
of the captured tokens - if we capture both the first and second unglued
tokens, then we'll end up capturing the full 'glued' token, which
already works correctly.
Recover on `const impl<> X for Y`
`@leonardo-m` mentioned that `const impl Foo for Bar` could be recovered from in #79287.
I'm not sure about the error strings as they are, I think it should probably be something like the error that `expected_one_of_not_found` makes + the suggestion to flip the keywords, but I'm not sure how exactly to do that. Also, I decided not to try to handle `const unsafe impl` or `unsafe const impl` cause I figured that `unsafe impl const` would be pretty rare anyway (if it's even valid?), and it wouldn't be worth making the code more messy.
Resolve enum field visibility correctly
Fixes#79593. 🎉
Previously, this code treated enum fields' visibility as if they were
struct fields. However, that's not correct because the visibility of a
struct field with `ast::VisibilityKind::Inherited` is private to the
module it's defined in, whereas the visibility of an *enum* field with
`ast::VisibilityKind::Inherited` is the visibility of the enum it
belongs to.
Remove an unused dependency that made `rustdoc` crash
Whilst struggling with https://github.com/rust-lang/rust/issues/79980 I discovered that this dependency was unused, and that made rustdoc crash. This PR removes it.
fix more clippy::complexity findings
fix clippy::unnecessary_filter_map
use if let Some(x) = .. instead of ...map(|x|) to conditionally run fns that return () (clippy::option_map_unit_fn)
fix clippy::{needless_bool, manual_unwrap_or}
don't clone types that are copy (clippy::clone_on_copy)
don't convert types into identical types with .into() (clippy::useless_conversion)
use strip_prefix over slicing (clippy::manual_strip)
r? ``@Dylan-DPC``
This improves how the `symbols` proc-macro handles errors.
If it finds an error in its input, the macro does not panic.
Instead, it still produces an output token stream. That token
stream will contain `compile_error!(...)` macro invocations.
This will still cause compilation to fail (which is what we want),
but it will prevent meaningless errors caused by the output not
containing symbols that the macro normally generates.
This solves a small (but annoying) problem. When you're editing
rustc_span/src/symbol.rs, and you get something wrong (dup
symbol name, misordered symbol), you want to get only the errors
that are relevant, not a burst of errors that are irrelevant.
This change also uses the correct Span when reporting errors,
so you get errors that point to the correct place in
rustc_span/src/symbol.rs where something is wrong.
This also adds several unit tests which test the `symbols` proc-macro.
This commit also makes it easy to run the `symbols` proc-macro
as an ordinary Cargo test. Just run `cargo test`. This makes it
easier to do development on the macro itself, such as running it
under a debugger.
This commit also uses the `Punctuated` type in `syn` for parsing
comma-separated lists, rather than doing it manually.
The output of the macro is not changed at all by this commit,
so rustc should be completely unchanged. This just improves
quality of life during development.
Previously, this code treated enum fields' visibility as if they were
struct fields. However, that's not correct because the visibility of a
struct field with `ast::VisibilityKind::Inherited` is private to the
module it's defined in, whereas the visibility of an *enum* field with
`ast::VisibilityKind::Inherited` is the visibility of the enum it
belongs to.
If we try to capture the `Vec<u8>` in `Option<Vec<u8>>`, we'll
need to capture a `>` token which was 'unglued' from a `>>` token.
The processing of unglueing a token for parsing purposes bypasses the
usual capturing infrastructure, so we currently lose the trailing `>`.
As a result, we fall back to the reparsed `TokenStream`, causing us to
lose spans.
This commit makes token capturing keep track of a trailing 'unglued'
token. Note that we don't need to care about unglueing except at the end
of the captured tokens - if we capture both the first and second unglued
tokens, then we'll end up capturing the full 'glued' token, which
already works correctly.
Create `rustc_type_ir`
Decided to start small 😄
This PR creates a `rustc_type_ir` crate as part of the WG-Traits plan to create a shared type library.
~~There already exists a `rustc_ty` crate, so I named the new crate `rustc_ty_library`. However I think it would make sense to rename the current `rustc_ty` to something else (e.g. `rustc_ty_passes`) to free the name for this new crate.~~
r? `@jackh726`
Fixes: #79569Fixes: #79566Fixes: #79565
For the first issue (#79569), I got hit a `debug_assert!()` before
encountering the reported error message (because I have `debug = true`
enabled in my config.toml).
The assertion showed me that some `SwitchInt`s can have more than one
target pointing to the same `BasicBlock`.
I had thought that was invalid, but since it seems to be possible, I'm
allowing this now.
I added a new test for this.
----
In the last two cases above, both tests (intentionally) fail to compile,
but the `InstrumentCoverage` pass is invoked anyway.
The MIR starts with an `Unreachable` `BasicBlock`, which I hadn't
encountered before. (I had assumed the `InstrumentCoverage` pass
would only be invoked with MIRs from successful compilations.)
I don't have test infrastructure set up to test coverage on files that
fail to compile, so I didn't add a new test.
Capture precise paths in THIR and MIR
This PR allows THIR and MIR to use the result of the new capture analysis to actually capture precise paths
To achieve we:
- Writeback min capture results to TypeckResults
- Move handling upvars to PlaceBuilder in mir_build
- Lower precise paths in THIR build by reading min_captures
- Search for ancestors in min_capture when trying to build a MIR place which starts off of an upvar
Closes: https://github.com/rust-lang/project-rfc-2229/issues/10
Partly implements: rust-lang/project-rfc-2229#18
Work that remains (not in this PR):
- [ ] [Known bugs when feature gate is enabled](https://github.com/rust-lang/project-rfc-2229/projects/1?card_filter_query=label%3Abug)
- [ ] Use min_capure_map for
- [ ] Liveness analysis
- [ ] rustc_mir/interpret/validity.rs
- [ ] regionck
- [ ] rust-lang/project-rfc-2229#8
- [ ] remove closure_captures and upvar_capture_map
r? `@ghost`
CTFE: tweak abort-on-uninhabited message
Having an "aborted execution:" makes it more consistent with the `Abort` terminator saying "the program aborted execution". Right now, at least one of the two errors will look weird in Miri.
r? `@oli-obk`
Use `def_path_hash_to_def_id` when re-using a `RawDefId`
Fixes#79890
Previously, we just copied a `RawDefId` from the 'old' map to the 'new'
map. However, the `RawDefId` for a given `DefPathHash` may be different
in the current compilation session. Using `def_path_hash_to_def_id`
ensures that the `RawDefId` we use is valid in the current session.
Use Symbol for inline asm register class names
This takes care of one "FIXME":
// FIXME: use direct symbol comparison for register class names
Instead of using string literals, this uses Symbol for register
class names.
This is part of work I am doing to improve how Symbol interning works.
Clarify the 'default is only allowed on...' error
Code like
impl Foo {
default fn foo() {}
}
will trigger the error
error: `default` is only allowed on items in `impl` definitions
--> src/lib.rs:5:5
|
5 | default fn foo() {}
| -------^^^^^^^^^
| |
| `default` because of this
but that's very confusing! I *did* put it on an item in an impl!
So this commit changes the message to
error: `default` is only allowed on items in trait impls
--> src/lib.rs:5:5
|
5 | default fn foo() {}
| -------^^^^^^^^^
| |
| `default` because of this
Dogfood `str_split_once()`
Part of https://github.com/rust-lang/rust/issues/74773.
Beyond increased clarity, this fixes some instances of a common confusion with how `splitn(2)` behaves: the first element will always be `Some()`, regardless of the delimiter, and even if the value is empty.
Given this code:
```rust
fn main() {
let val = "...";
let mut iter = val.splitn(2, '=');
println!("Input: {:?}, first: {:?}, second: {:?}", val, iter.next(), iter.next());
}
```
We get:
```
Input: "no_delimiter", first: Some("no_delimiter"), second: None
Input: "k=v", first: Some("k"), second: Some("v")
Input: "=", first: Some(""), second: Some("")
```
Using `str_split_once()` makes more clear what happens when the delimiter is not found.
