Dont ICE when computing coverage of synthetic async closure body
I'm not totally certain if this is *right*, but at least it doesn't ICE.
The issue is that we end up generating two MIR bodies for each async closure, since the `FnOnce` and `Fn`/`FnMut` implementations have different borrowing behavior of their captured variables. They should ideally both contribute to the coverage, since those MIR bodies are (*to the user*) the same code and should have no behavioral differences.
This PR at least suppresses the ICEs, and then I guess worst case we can fix this the right way later.
r? Zalathar or re-roll
Fixes#131190
Regression test for AVR `rjmp` offset
This adds a regression test for #129301 by minimizing the code in the linked issue and putting it into a `#![no_core]`-compatible format, so that it can easily be used within an `rmake`-test. This needs to be a `rmake` test (opposed to a `tests/assembly` one), since the linked issue describes, that the problem only occurs if the code is directly compiled. Note, that `lld` is used instead of `avr-gcc`; see the [comments](https://github.com/rust-lang/rust/pull/131755#issuecomment-2416469675) [below](https://github.com/rust-lang/rust/pull/131755#issuecomment-2417160045).
Closes#129301.
To show, that the test actually catches the wrong behavior, this can be tested with a faulty rustc:
```bash
$ rustup install nightly-2024-08-19
$ rustc +nightly-2024-08-19 -C opt-level=s -C panic=abort --target avr-unknown-gnu-atmega328 -Clinker=build/x86_64-unknown-linux-gnu/ci-llvm/bin/lld -Clink-arg='--entry=main' -o compiled tests/run-make/avr-rjmp-offset/avr-rjmp-offsets.rs
$ llvm-objdump -d compiled | grep '<main>' -A 6
000110b4 <main>:
110b4: 81 e0 ldi r24, 0x1
110b6: 92 e0 ldi r25, 0x2
110b8: 85 b9 out 0x5, r24
110ba: 95 b9 out 0x5, r25
110bc: fe cf rjmp .-4
```
One can see, that the wrong label offset (`4` instead of `6`) is produced, which would trigger an assertion in the test case.
This would be a good candidate for using the `minicore` proposed in #130693. Since this is not yet merged, there is a FIXME.
r? Patryk27
I think, you are the yet-to-be official target maintainer, hence I'll assign to you.
`@rustbot` label +O-AVR
Allow dropping dyn principal
Revival of #126660, which was a revival of #114679. Fixes#126313.
Allows dropping principal when coercing trait objects, e.g. `dyn Debug + Send` -> `dyn Send`.
cc `@compiler-errors` `@Jules-Bertholet`
r? `@lcnr`
Avoid superfluous UB checks in `IndexRange`
`IndexRange::len` is justified as an overall invariant, and
`take_prefix` and `take_suffix` are justified by local branch
conditions. A few more UB-checked calls remain in cases that are only
supported locally by `debug_assert!`, which won't do anything in
distributed builds, so those UB checks may still be useful.
We generally expect core's `#![rustc_preserve_ub_checks]` to optimize
away in user's release builds, but the mere presence of that extra code
can sometimes inhibit optimization, as seen in #131563.
Add `must_use` to `CommandExt::exec`
[CommandExt::exec](https://fburl.com/0qhpo7nu) returns a `std::io::Error` in the case exec fails, but its not currently marked as `must_use` making it easy to accidentally ignore it.
This PR adds the `must_use` attributed here as i think it fits the definition in the guide of [When to add #[must_use]](https://std-dev-guide.rust-lang.org/policy/must-use.html#when-to-add-must_use)
llvm: Tolerate propagated range metadata
llvm/llvm-project#91101 propagates range information across inlining, resulting in more metadata in this test. Tolerate the range metadata if it appears.
``@rustbot:`` label +llvm-main
r? ``@durin42``
Please wait a moment before approving, putting the llvm-main tag on it to make sure it fixes the integration test.
cleanup canonical queries
best reviewed commit by commit. adding `CanonicalQueryInput` to stop returning `defining_opaque_types` in query responses is the most involved change here.
r? ``@compiler-errors``
rustdoc-JSON: Rename "object safe" to "dyn compatible"
~~Blocked: Sits atop #131594. Only the last commit is relevant.~~ (rebased)
Part of #130852.
r? aDotInTheVoid or rustdoc
This fixes the [build error] caused by the `avr-gcc` (used as linker)
not being available in the Rust CI. This is a viable solution, which
shows the wrong/right behavior and, since no functions from `libgcc` are
called, does not produce errors. This was discussed [here]. Another
small problem is, that `lld` doesn't link the correct startup-code by
default. This is not a problem for this test (since it does not actually
use anything the startup code is needed for (no variables, no stack, no
interrupts)), but this causes the `main`-function to be removed by the
default flag `--gc-sections`. Therefore the `rmake`-driver also adds the
linker flag `--entry=main` to mark the `main`-function as the entry
point and thus preventing it from getting removed. The code would work
on a real AVR device.
[build error]: https://github.com/rust-lang/rust/pull/131755#issuecomment-2415127952
[here]: https://github.com/rust-lang/rust/pull/131755#issuecomment-2416469675
Make destructors on `extern "C"` frames to be executed
This would make the example in #123231 print "Noisy Drop". I didn't mark this as fixing the issue because the behaviour is yet to be spec'ed.
Tracking:
- https://github.com/rust-lang/rust/issues/74990
llvm/llvm-project#91101 propagates range information across inlining,
resulting in more metadata in this test. Tolerate the range metadata if
it appears.
Emscripten: Xfail backtrace ui tests
It is possible to link libunwind and use the normal backtrace code, but it fails to symbolize stack traces. I investigated and could get the list of instruction pointers and symbol names, but I'm not sure how to use the dwarf info to map from instruction pointer to source location. In any case, fixing this is not a high priority.
See https://github.com/rust-lang/rust/issues/131738
r?jieyouxu
Rename `can_coerce` to `may_coerce`, and then structurally resolve correctly in the probe
We need to structurally resolve the lhs and rhs of the coercion. Also, renaming the method so it's less ambiguous about what it's doing... the word "may" gives more clear signal that it has false positives imo.
r? lcnr
Delay ambiguous intra-doc link resolution after `Cache` has been populated
Fixes https://github.com/rust-lang/rust/issues/130233.
I was getting nowhere with #130278. I took a wrong turn at some point and ended making way too many changes so instead I started again back from 0 and this time it worked out as expected.
r? ```@notriddle```
Don't check unsize goal in MIR validation when opaques remain
Similarly to `mir_assign_valid_types`, let's just skip when there are opaques. Fixes#130921.
Ignore lint-non-snake-case-crate#proc_macro_ on targets without unwind
The lint-non-snake-case-crate test may emit a warning in stderr if the target does not support unwinding
```
warning: building proc macro crate with `panic=abort` may crash the compiler should the proc-macro panic
```
Consequently, the test will fail on targets that don't support unwinding as written.
This change modifies the expected stderr for lint-non-snake-case-crate in the proc_macro_ to ignore lines that indicate a warning was emitted.
Try to improve error messages involving aliases in the solver
1. Treat aliases as rigid only if it may not be defined and it's well formed (i.e. for projections, its trait goal is satisfied).
2. Record goals that are related to alias normalization under a new `GoalKind`, so we can look into them in the `BestObligation` visitor.
3. Try to deduplicate errors due to self types of goals that are un-normalizable aliases.
r? lcnr
Implement edition 2024 match ergonomics restrictions
This implements the minimalest version of [match ergonomics for edition 2024](https://rust-lang.github.io/rfcs/3627-match-ergonomics-2024.html). This minimal version makes it an error to ever reset the default binding mode. The implemented proposal is described precisely [here](https://hackmd.io/zUqs2ISNQ0Wrnxsa9nhD0Q#RFC-3627-nano), where it is called "RFC 3627-nano".
Rules:
- Rule 1C: When the DBM (default binding mode) is not `move` (whether or not behind a reference), writing `mut`, `ref`, or `ref mut` on a binding is an error.
- Rule 2C: Reference patterns can only match against references in the scrutinee when the DBM is `move`.
This minimal version is forward-compatible with the main proposals for match ergonomics 2024: [RFC3627](https://rust-lang.github.io/rfcs/3627-match-ergonomics-2024.html) itself, the alternative [rule 4-early variant](https://rust-lang.github.io/rfcs/3627-match-ergonomics-2024.html), and [others](https://hackmd.io/zUqs2ISNQ0Wrnxsa9nhD0Q). The idea is to give us more time to iron out a final proposal.
This includes a migration lint that desugars any offending pattern into one that doesn't make use of match ergonomics. Such patterns have identical meaning across editions.
This PR insta-stabilizes the proposed behavior onto edition 2024.
r? `@ghost`
Tracking:
- https://github.com/rust-lang/rust/issues/123076
Add `from_ref` and `from_mut` constructors to `core::ptr::NonNull`.
Relevant tracking issue: #130823
The `core::ptr::NonNull` type should have the convenience constructors `from_ref` and `from_mut` for parity with `core::ptr::from_ref` and `core::ptr::from_mut`.
Although the type in question already implements `From<&T>` and `From<&mut T>`, these new functions also carry the ability to be used in constant expressions (due to not being behind a trait).
The new `rmake`-content asserts the exact assembly sequence for the loop
preventing false-negatives if some instructions would change and thus
the label offset might need to change.
Since the `tests/assembly` use `emit=asm`, the issue is not observable
as reported in the linked issue. Therefore the existing test case is
converted and a simple `rmake`-test is added. The test only checks, if
the correct `rjmp`-offset is used.
The lint-non-snake-case-crate test may emit a warning in stderr if the
target does not support unwinding
```
warning: building proc macro crate with `panic=abort` may crash the compiler should the proc-macro panic
```
Consequently, the test will fail on targets that don't support unwinding
as written.
This change prevents lint-non-snake-case-crate#proc_macro_ from running
on targets that don't support unwind by using the needs-unwind
directive.
It is possible to link libunwind and use the normal backtrace code, but it fails
to symbolize stack traces. I investigated and could get the list of instruction
pointers and symbol names, but I'm not sure how to use the dwarf info to map
from instruction pointer to source location. In any case, fixing this is
probably not a high priority.
See https://github.com/rust-lang/rust/issues/131738
Handle gracefully true/false in `cfg(target(..))` compact
This PR handles gracefully `true`/`false` in `cfg(target(..))` compact instead of ICE.
r? `@nnethercote`
Fixes#131759
Fix unnecessary nesting in run-make test output directories
Run-make tests were using `output_base_name` to determine their output directory, which results in a redundant subdirectory (e.g. `$build/test/run-make/<foo>/<foo>/`) because that method is intended to produce the name of an individual file.
The previous attempt to fix this double-nesting tried adding a special case in `output_base_dir`, which had the side-effect of breaking up-to-date checking for run-make tests, and had to be reverted in #131681.
The fix is simply to call `output_base_dir` directory, which gives the desired directory without any redundant part.
r? jieyouxu
Don't report bivariance error when nesting a struct with field errors into another struct
We currently have logic to avoid reporting lifetime bivariance ("lifetime parameter ... is never used") errors when a struct has field resolution errors. However, this doesn't apply transitively. This PR implements a simple visitor to do so.
This was reported [here](https://twitter.com/fasterthanlime/status/1846257921086165033) since a `derive(Deserialize, Serialize)` ends up generating helper structs which have bivariant lifetimes due to containing the offending struct (that's being derived on).
