Error messages are supposed to start with lowercase letters, but a lot
of `io::const_error` messages did not. This fixes them to start with a
lowercase letter.
I did consider adding a const check for this to the macro, but some of
them start with proper nouns that make sense to uppercase them.
See https://doc.rust-lang.org/1.85.0/std/error/trait.Error.html
In [1], most dependencies of `std` and other sysroot crates were marked
private, but this did not happen for `alloc` and `test`. Update these
here, marking public standard library crates as the only non-private
dependencies.
[1]: https://github.com/rust-lang/rust/pull/111076
Use `const_error!` when possible
Replace usages of `io::Error::new(io::ErrorKind::Variant, "constant string")` with `io::const_error!(io::ErrorKind::Variant, "constant string")` to avoid allocations when possible. Additionally, fix `&&str` error messages in SGX and missing/misplaced trailing commas in `const_error!`.
Some miscellaneous edition-related library tweaks
Some library edition tweaks that can be done separately from upgrading the whole standard library to edition 2024 (which is blocked on getting the submodules upgraded, for example)
Update emscripten std tests
This disables a bunch of emscripten tests that test things emscripten doesn't support and re-enables a whole bunch of tests which now work just fine on emscripten.
Tested with `EMCC_CFLAGS="-s MAXIMUM_MEMORY=2GB" ./x.py test library/ --target wasm32-unknown-emscripten`.
rust-lang/testing-devex-team#9 proposed changing the behavior of `--logfile`.
The given reasons were:
(1) Bazel can't programmatically process stdout. This seems like a
limitation in Bazel and we recommend focusing on that. If we look at
the wider Rust ecosystem, Rustc and Cargo don't support any such
mechanism and the Cargo team rejected having one. Expecting this in
libtest when its not supported elsewhere seems too specialized.
(2) Tests that leak out non-programmatic output that intermixes with
programmatic output. We acknowledge this is a problem to be evaluated
but we need to make sure we are stepping back and gathering
requirements, rather than assuming `--logfile` will fit the needs.
Independent of the motive, regarding using or changing `--logfile`
(1) Most ways to do it would be a breaking change, like if we respect
any stable `--format`. As suggested above, we could specialize this to
new `--format` values but that would be confusing for some values to
apply but not others.
(2) Other ways of solving this add new features to lib`test` when we are
instead wanting to limit the feature set it has to minimize the
compatibility surface that has to be maintained and the burden it would
put on third party harnesses which are a focus area. Examples include
`--format compact` or a `--log-format` flag
(3) The existence of `--logfile` dates back quite a ways
(5cc050b265,
rust-lang/rust#2127) and the history gives the
impression this more of slipped through rather than being an intended
feature (see also
https://github.com/rust-lang/rust/pull/82350#discussion_r579732071).
Deprecation would better match to how it has been treated.
By deprecating this, we do not expect custom test harnesses
(rust-lang/testing-devex-team#2) to implement this.
T-testing-devex held an FCP for deprecating in rust-lang/testing-devex-team#9
though according to
[RFC #3455](https://rust-lang.github.io/rfcs/3455-t-test.html),
this is still subject to final approval from T-libs-api.
Clean and enable `rustdoc::unescaped_backticks` for `core/alloc/std/test/proc_macro`
I am not sure if the lint is supposed to be "ready enough" (since it is `allow` by default), but it does catch a couple issues in `core` (`alloc`, `std`, `test` and `proc_macro` are already clean), so I propose making it `warn` in all the crates rendered in the website.
Cc: `@GuillaumeGomez`
Fuchsia status code match arm
Adds a match arm for the Fuchsia status code upon a process abort. An additional change moves the Windows status code down into the match arm itself instead of being defined as a constant elsewhere.
r? tmandry
There are some comments describing multiple subsequent `use` items. When
the big `use` reformatting happens some of these `use` items will be
reordered, possibly moving them away from the comment. With this
additional level of formatting it's not really feasible to have comments
of this type. This commit removes them in various ways:
- merging separate `use` items when appropriate;
- inserting blank lines between the comment and the first `use` item;
- outright deletion (for comments that are relatively low-value);
- adding a separate "top-level" comment.
We also entirely skip formatting for four library files that contain
nothing but `pub use` re-exports, where reordering would be painful.
Most modules have such a blank line, but some don't. Inserting the blank
line makes it clearer that the `//!` comments are describing the entire
module, rather than the `use` declaration(s) that immediately follows.
zkvm: fix run_tests
`zkvm` is single-threaded, similar to `emscripten` and `wasm`. The `cfg` for `zkvm` seems to have been dropped. This PR adds the `cfg` again.
libtest: also measure time in Miri
A long time ago we disabled timekeeping of the default test harness in Miri, as otherwise it would fail to run without `-Zmiri-disable-isolation`. However, since then Miri gained a "fake clock" that lets it present some deterministic notion of time when isolation is enabled.
So we could now let libtest do timekeeping again when running in Miri. That's nice as it can help detect tests that run too long. However it can also be confusing as the results with isolation can be quite different than the real time.
``@rust-lang/miri`` what do you think?
Previously we left the panic hook we allocated
on main termination. Doing so makes Valgrind
report it as a reachable unfreed block.
In order to fix that use `panic::take_hook()` before
examining test results.
Example backtrace:
```
==146594== 16 bytes in 1 blocks are still reachable in loss record 1 of 1
==146594== at 0x4A390C5: malloc (vg_replace_malloc.c:442)
==146594== by 0x151336: alloc (alloc.rs:98)
==146594== by 0x151336: alloc_impl (alloc.rs:181)
==146594== by 0x151336: allocate (alloc.rs:241)
==146594== by 0x151336: exchange_malloc (alloc.rs:330)
==146594== by 0x151336: new<test::test_main::{closure_env#0}> (boxed.rs:217)
==146594== by 0x151336: test::test_main (lib.rs:124)
==146594== by 0x1522F9: test::test_main_static (lib.rs:160)
==146594== by 0x11E102: reachable_block_with_cargo_test::main (lib.rs:1)
==146594== by 0x11EABA: core::ops::function::FnOnce::call_once (function.rs:250)
==146594== by 0x11E76D: std::sys_common::backtrace::__rust_begin_short_backtrace (backtrace.rs:154)
==146594== by 0x11DFC0: std::rt::lang_start::{{closure}} (rt.rs:166)
==146594== by 0x177D3A: call_once<(), (dyn core::ops::function::Fn<(), Output=i32> + core::marker::Sync + core::panic::unwind_safe::RefUnwindSafe)> (function.rs:284)
==146594== by 0x177D3A: do_call<&(dyn core::ops::function::Fn<(), Output=i32> + core::marker::Sync + core::panic::unwind_safe::RefUnwindSafe), i32> (panicking.rs:504)
==146594== by 0x177D3A: try<i32, &(dyn core::ops::function::Fn<(), Output=i32> + core::marker::Sync + core::panic::unwind_safe::RefUnwindSafe)> (panicking.rs:468)
==146594== by 0x177D3A: catch_unwind<&(dyn core::ops::function::Fn<(), Output=i32> + core::marker::Sync + core::panic::unwind_safe::RefUnwindSafe), i32> (panic.rs:142)
==146594== by 0x177D3A: {closure#2} (rt.rs:148)
==146594== by 0x177D3A: do_call<std::rt::lang_start_internal::{closure_env#2}, isize> (panicking.rs:504)
==146594== by 0x177D3A: try<isize, std::rt::lang_start_internal::{closure_env#2}> (panicking.rs:468)
==146594== by 0x177D3A: catch_unwind<std::rt::lang_start_internal::{closure_env#2}, isize> (panic.rs:142)
==146594== by 0x177D3A: std::rt::lang_start_internal (rt.rs:148)
==146594== by 0x11DF99: std::rt::lang_start (rt.rs:165)
```
Signed-off-by: Tal Gelbard <talgelbard1@gmail.com>
This commit updates the libtest conditionals to use `std::time::Instant`
on WASI targets where it's implemented. Previously all wasm targets
wouldn't use this type.
Previously, libtest would wait until all tests finished running to print the progress, which made it
annoying to run many tests at once (since you don't know which have failed). Change it to print the
names as soon as they fail.
This also adds a test for the terse output; previously it was untested.
This also adds changes in the rust test suite in order to get a few of them to
pass.
Co-authored-by: Frank Laub <flaub@risc0.com>
Co-authored-by: Urgau <3616612+Urgau@users.noreply.github.com>
libtest: Fix padding of benchmarks run as tests
### Summary
The first commit adds regression tests for libtest padding.
The second commit fixes padding for benches run as tests and updates the blessed output of the regression tests to make it clear what effect the fix has on padding.
Closes#104092 which is **E-help-wanted** and **regression-from-stable-to-stable**
### More details
Before this fix we applied padding _before_ manually doing what `convert_benchmarks_to_tests()` does which affects padding calculations. Instead use `convert_benchmarks_to_tests()` first if applicable and then apply padding afterwards so it becomes correct.
Benches should only be padded when run as benches to make it easy to compare the benchmark numbers. Not when run as tests.
r? `@ghost` until CI passes.
