Implement `#[cfg]` in `where` clauses
This PR implements #115590, which supports `#[cfg]` attributes in `where` clauses.
The biggest change is, that it adds `AttrsVec` and `NodeId` to the `ast::WherePredicate` and `HirId` to the `hir::WherePredicate`.
For consistency with `rustc_lexer::TokenKind::Bang`, and because other
`ast::TokenKind` variants generally have syntactic names instead of
semantic names (e.g. `Star` and `DotDot` instead of `Mul` and `Range`).
`BinOpToken` is badly named, because it only covers the assignable
binary ops and excludes comparisons and `&&`/`||`. Its use in
`ast::TokenKind` does allow a small amount of code sharing, but it's a
clumsy factoring.
This commit removes `ast::TokenKind::BinOp{,Eq}`, replacing each one
with 10 individual variants. This makes `ast::TokenKind` more similar to
`rustc_lexer::TokenKind`, which has individual variants for all
operators.
Although the number of lines of code increases, the number of chars
decreases due to the frequent use of shorter names like `token::Plus`
instead of `token::BinOp(BinOpToken::Plus)`.
Note: there was an existing code path involving `Interpolated` in
`MetaItem::from_tokens` that was dead. This commit transfers that to the
new form, but puts an `unreachable!` call inside it.
The one notable test change is `tests/ui/macros/trace_faulty_macros.rs`.
This commit removes the complicated `Interpolated` handling in
`expected_expression_found` that results in a longer error message. But
I think the new, shorter message is actually an improvement.
The original complaint was in #71039, when the error message started
with "error: expected expression, found `1 + 1`". That was confusing
because `1 + 1` is an expression. Other than that, the reporter said
"the whole error message is not too bad if you ignore the first line".
Subsequently, extra complexity and wording was added to the error
message. But I don't think the extra wording actually helps all that
much. In particular, it still says of the `1+1` that "this is expected
to be expression". This repeats the problem from the original complaint!
This commit removes the extra complexity, reverting to a simpler error
message. This is primarily because the traversal is a pain without
`Interpolated` tokens. Nonetheless, I think the error message is
*improved*. It now starts with "expected expression, found `pat`
metavariable", which is much clearer and the real problem. It also
doesn't say anything specific about `1+1`, which is good, because the
`1+1` isn't really relevant to the error -- it's the `$e:pat` that's
important.
It mirrors `ExprKind::Binary`, and contains a `BinOpKind`. This makes
`AssocOp` more like `ExprKind`. Note that the variants removed from
`AssocOp` are all named differently to `BinOpToken`, e.g. `Multiply`
instead of `Mul`, so that's an inconsistency removed.
The commit adds `precedence` and `fixity` methods to `BinOpKind`, and
calls them from the corresponding methods in `AssocOp`. This avoids the
need to create an `AssocOp` from a `BinOpKind` in a bunch of places, and
`AssocOp::from_ast_binop` is removed.
`AssocOp::to_ast_binop` is also no longer needed.
Overall things are shorter and nicer.
`AssocOp::AssignOp` contains a `BinOpToken`. `ExprKind::AssignOp`
contains a `BinOpKind`. Given that `AssocOp` is basically a cut-down
version of `ExprKind`, it makes sense to make `AssocOp` more like
`ExprKind`. Especially given that `AssocOp` and `BinOpKind` use semantic
operation names (e.g. `Mul`, `Div`), but `BinOpToken` uses syntactic
names (e.g. `Star`, `Slash`).
This results in more concise code, and removes the need for various
conversions. (Note that the removed functions `hirbinop2assignop` and
`astbinop2assignop` are semantically identical, because `hir::BinOp` is
just a synonum for `ast::BinOp`!)
The only downside to this is that it allows the possibility of some
nonsensical combinations, such as `AssocOp::AssignOp(BinOpKind::Lt)`.
But `ExprKind::AssignOp` already has that problem. The problem can be
fixed for both types in the future with some effort, by introducing an
`AssignOpKind` type.
Make it so that every structured error annotated with `#[derive(Diagnostic)]` that has a field of type `Ty<'_>`, the printing of that value into a `String` will look at the thread-local storage `TyCtxt` in order to shorten to a length appropriate with the terminal width. When this happen, the resulting error will have a note with the file where the full type name was written to.
```
error[E0618]: expected function, found `((..., ..., ..., ...), ..., ..., ...)``
--> long.rs:7:5
|
6 | fn foo(x: D) { //~ `x` has type `(...
| - `x` has type `((..., ..., ..., ...), ..., ..., ...)`
7 | x(); //~ ERROR expected function, found `(...
| ^--
| |
| call expression requires function
|
= note: the full name for the type has been written to 'long.long-type-14182675702747116984.txt'
= note: consider using `--verbose` to print the full type name to the console
```
Fix "missing match arm body" suggestion involving `!`
Include the match arm guard in the gated span, so that the suggestion to add a body is correct instead of inserting the body before the guard.
Make the suggestion verbose.
```
error: `match` arm with no body
--> $DIR/feature-gate-never_patterns.rs:43:9
|
LL | Some(_) if false,
| ^^^^^^^^^^^^^^^^
|
help: add a body after the pattern
|
LL | Some(_) if false => { todo!() },
| ++++++++++++++
```
r? `@compiler-errors`
Include the match arm guard in the gated span, so that the suggestion to add a body is correct instead of inserting the body before the guard.
Make the suggestion verbose.
```
error: `match` arm with no body
--> $DIR/feature-gate-never_patterns.rs:43:9
|
LL | Some(_) if false,
| ^^^^^^^^^^^^^^^^
|
help: add a body after the pattern
|
LL | Some(_) if false => { todo!() },
| ++++++++++++++
```
Use `edition = "2024"` in the compiler (redux)
Most of this is binding mode changes, which I fixed by running `x.py fix`.
Also adds some miscellaneous `unsafe` blocks for new unsafe standard library functions (the setenv ones), and a missing `unsafe extern` block in some enzyme codegen code, and fixes some precise capturing lifetime changes (but only when they led to errors).
cc ``@ehuss`` ``@traviscross``
Remove `NtVis` and `NtTy`
The next part of #124141. The first actual remove of `Nonterminal` variants. `NtVis` is a simple case that doesn't get much use, but `NtTy` is more complex.
r? `@petrochenkov`
Notes about tests:
- tests/ui/parser/macro/trait-object-macro-matcher.rs: the syntax error
is duplicated, because it occurs now when parsing the decl macro
input, and also when parsing the expanded decl macro. But this won't
show up for normal users due to error de-duplication.
- tests/ui/associated-consts/issue-93835.rs: similar, plus there are
some additional errors about this very broken code.
- The changes to metavariable descriptions in #132629 are now visible in
error message for several tests.
Tweak "expected ident" parse error to avoid talking about doc comments
When encountering a doc comment without an identifier after, we'd unconditionally state "this doc comment doesn't document anything", swallowing the *actual* error which is that the thing *after* the doc comment wasn't expected. Added a check that the found token is something that "conceptually" closes the previous item before emitting that error, otherwise just complain about the missing identifier.
In both of the following cases, the syntax error follows a doc comment:
```
error: expected identifier, found keyword `Self`
--> $DIR/doc-before-bad-variant.rs:4:5
|
LL | enum TestEnum {
| -------- while parsing this enum
...
LL | Self,
| ^^^^ expected identifier, found keyword
|
= help: enum variants can be `Variant`, `Variant = <integer>`, `Variant(Type, ..., TypeN)` or `Variant { fields: Types }`
```
```
error: expected identifier, found `<`
--> $DIR/doc-before-syntax-error.rs:2:1
|
LL | <>
| ^ expected identifier
```
Fix#71982.
When encountering a doc comment without an identifier after, we'd unconditionally state "this doc comment doesn't document anything", swallowing the *actual* error which is that the thing *after* the doc comment wasn't expected. Added a check that the found token is something that "conceptually" closes the previous item before emitting that error, otherwise just complain about the missing identifier.
In both of the following cases, the syntax error follows a doc comment:
```
error: expected identifier, found keyword `Self`
--> $DIR/doc-before-bad-variant.rs:4:5
|
LL | enum TestEnum {
| -------- while parsing this enum
...
LL | Self,
| ^^^^ expected identifier, found keyword
|
= help: enum variants can be `Variant`, `Variant = <integer>`, `Variant(Type, ..., TypeN)` or `Variant { fields: Types }`
```
```
error: expected identifier, found `<`
--> $DIR/doc-before-syntax-error.rs:2:1
|
LL | <>
| ^ expected identifier
```
Fix#71982.
Because of an ambiguity with const closures, the parser needs to ensure
that for a const item, the `const` keyword isn't followed by a `move` or
`static` keyword, as that would indicate a const closure:
```rust
fn main() {
const move // ...
}
```
This check did not take raw identifiers into account, therefore being
unable to distinguish between `const move` and `const r#move`. The
latter is obviously not a const closure, so it should be allowed as a
const item.
This fixes the check in the parser to only treat `const ...` as a const
closure if it's followed by the *proper keyword*, and not a raw
identifier.
Additionally, this adds a large test that tests for all raw identifiers in
all kinds of positions, including `const`, to prevent issues like this
one from occurring again.
Try to recover from path sep error in type parsing
Fixes#129273
Error using `:` in the argument list may mess up the parser.
case `tests/ui/suggestions/struct-field-type-including-single-colon` also changed, seems it's the same meaning, should be OK.
r? `@estebank`
Do not allow attributes on struct field rest patterns
Fixes#81282.
This removes support for attributes on struct field rest patterns (the `..` bit) from the parser. Previously any attributes were being parsed but dropped from the AST, so didn't work and were deleted by rustfmt.
This needs an equivalent change to the reference but I wanted to see how this PR is received first.
The error message it produces isn't great, however it does match the error you get if you try to add attributes to .. in struct expressions atm, although I can understand wanting to do better given this was previously accepted. I think I could move attribute parsing back up to where it was and then emit a specific new error for this case, however I might need some guidance as this is the first time I've messed around inside the compiler.
While this is technically breaking I don't think it's much of an issue: attributes in this position don't currently do anything and rustfmt outright deletes them, meaning it's incredibly unlikely to affect anyone. I have already made the equivalent change to *add* support for attributes (mostly) but the conversation in the linked issue suggested it would be more reasonable to just remove them (and pointed out it's much easier to add support later if we realise we need them).
tree-wide: parallel: Fully removed all `Lrc`, replaced with `Arc`
tree-wide: parallel: Fully removed all `Lrc`, replaced with `Arc`
This is continuation of https://github.com/rust-lang/rust/pull/132282 .
I'm pretty sure I did everything right. In particular, I searched all occurrences of `Lrc` in submodules and made sure that they don't need replacement.
There are other possibilities, through.
We can define `enum Lrc<T> { Rc(Rc<T>), Arc(Arc<T>) }`. Or we can make `Lrc` a union and on every clone we can read from special thread-local variable. Or we can add a generic parameter to `Lrc` and, yes, this parameter will be everywhere across all codebase.
So, if you think we should take some alternative approach, then don't merge this PR. But if it is decided to stick with `Arc`, then, please, merge.
cc "Parallel Rustc Front-end" ( https://github.com/rust-lang/rust/issues/113349 )
r? SparrowLii
`@rustbot` label WG-compiler-parallel
This has now been approved as a language feature and no longer needs
a `rustc_` prefix.
Also change the `contracts` feature to be marked as incomplete and
`contracts_internals` as internal.
The extended syntax for function signature that includes contract clauses
should never be user exposed versus the interface we want to ship
externally eventually.
includes post-developed commit: do not suggest internal-only keywords as corrections to parse failures.
includes post-developed commit: removed tabs that creeped in into rustfmt tool source code.
includes post-developed commit, placating rustfmt self dogfooding.
includes post-developed commit: add backquotes to prevent markdown checking from trying to treat an attr as a markdown hyperlink/
includes post-developed commit: fix lowering to keep contracts from being erroneously inherited by nested bodies (like closures).
Rebase Conflicts:
- compiler/rustc_parse/src/parser/diagnostics.rs
- compiler/rustc_parse/src/parser/item.rs
- compiler/rustc_span/src/hygiene.rs
Remove contracts keywords from diagnostic messages
This removes support for attributes on struct field rest patterns (the `..`) from the parser.
Previously they were being parsed but dropped from the AST, so didn't work and were deleted by rustfmt.
Trim extra whitespace in fn ptr suggestion span
Trim extra whitespace when suggesting removal of invalid qualifiers when parsing function pointer type.
Fixes: #133083
---
I made a comment about the format of the diagnostic error message in https://github.com/rust-lang/rust/issues/133083#issuecomment-2480047875. I think the `.label` may be a little redundant if the diagnostic only highlights the bad qualifier instead of the entire `TyKind::BareFn` span. If it makes sense, I can include it in this PR.
Trim extra whitespace when suggesting removal of invalid qualifiers when
parsing function pointer type.
Fixes: #133083
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Only assert the `Parser` size on specific arches
The size of this struct depends on the alignment of `u128`, for example
powerpc64le and s390x have align-8 and end up with only 280 bytes. Our
64-bit tier-1 arches are the same though, so let's just assert on those.
r? nnethercote
Point at invalid utf-8 span on user's source code
```
error: couldn't read `$DIR/not-utf8-bin-file.rs`: stream did not contain valid UTF-8
--> $DIR/not-utf8-2.rs:6:5
|
LL | include!("not-utf8-bin-file.rs");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: byte `193` is not valid utf-8
--> $DIR/not-utf8-bin-file.rs:2:14
|
LL | let _ = "�|�␂!5�cc␕␂��";
| ^
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
```
When we attempt to load a Rust source code file, if there is a OS file failure we try reading the file as bytes. If that succeeds we try to turn it into UTF-8. If *that* fails, we provide additional context about *where* the file has the first invalid UTF-8 character.
Fix#76869.
Properly record metavar spans for other expansions other than TT
This properly records metavar spans for nonterminals other than tokentree. This means that we operations like `span.to(other_span)` work correctly for macros. As you can see, other diagnostics involving metavars have improved as a result.
Fixes#132908
Alternative to #133270
cc `@ehuss`
cc `@petrochenkov`
The size of this struct depends on the alignment of `u128`, for example
powerpc64le and s390x have align-8 and end up with only 280 bytes. Our
64-bit tier-1 arches are the same though, so let's just assert on those.
```
error: couldn't read `$DIR/not-utf8-bin-file.rs`: stream did not contain valid UTF-8
--> $DIR/not-utf8-2.rs:6:5
|
LL | include!("not-utf8-bin-file.rs");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: `[193]` is not valid utf-8
--> $DIR/not-utf8-bin-file.rs:2:14
|
LL | let _ = "�|�␂!5�cc␕␂��";
| ^
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
```
When we attempt to load a Rust source code file, if there is a OS file failure we try reading the file as bytes. If that succeeds we try to turn it into UTF-8. If *that* fails, we provide additional context about *where* the file has the first invalid UTF-8 character.
Fix#76869.
Fix parenthesization of chained comparisons by pretty-printer
Example:
```rust
macro_rules! repro {
() => {
1 < 2
};
}
fn main() {
let _ = repro!() == false;
}
```
Previously `-Zunpretty=expanded` would pretty-print this syntactically invalid output: `fn main() { let _ = 1 < 2 == false; }`
```console
error: comparison operators cannot be chained
--> <anon>:8:23
|
8 | fn main() { let _ = 1 < 2 == false; }
| ^ ^^
|
help: parenthesize the comparison
|
8 | fn main() { let _ = (1 < 2) == false; }
| + +
```
With the fix, it will print `fn main() { let _ = (1 < 2) == false; }`.
Making `-Zunpretty=expanded` consistently produce syntactically valid Rust output is important because that is what makes it possible for `cargo expand` to format and perform filtering on the expanded code.
## Review notes
According to `rg '\.fixity\(\)' compiler/` the `fixity` function is called only 3 places:
- 13170cd787/compiler/rustc_ast_pretty/src/pprust/state/expr.rs (L283-L287)
- 13170cd787/compiler/rustc_hir_pretty/src/lib.rs (L1295-L1299)
- 13170cd787/compiler/rustc_parse/src/parser/expr.rs (L282-L289)
The 2 pretty printers definitely want to treat comparisons using `Fixity::None`. That's the whole bug being fixed. Meanwhile, the parser's `Fixity::None` codepath is previously unreachable as indicated by the comment, so as long as `Fixity::None` here behaves exactly the way that `Fixity::Left` used to behave, you can tell that this PR definitely does not constitute any behavior change for the parser.
My guess for why comparison operators were set to `Fixity::Left` instead of `Fixity::None` is that it's a very old workaround for giving a good chained comparisons diagnostic (like what I pasted above). Nowadays that is handled by a different dedicated codepath.
Detect missing `.` in method chain in `let` bindings and statements
On parse errors where an ident is found where one wasn't expected, see if the next elements might have been meant as method call or field access.
```
error: expected one of `.`, `;`, `?`, `else`, or an operator, found `map`
--> $DIR/missing-dot-on-statement-expression.rs:7:29
|
LL | let _ = [1, 2, 3].iter()map(|x| x);
| ^^^ expected one of `.`, `;`, `?`, `else`, or an operator
|
help: you might have meant to write a method call
|
LL | let _ = [1, 2, 3].iter().map(|x| x);
| +
```
On parse errors where an ident is found where one wasn't expected, see if the next elements might have been meant as method call or field access.
```
error: expected one of `.`, `;`, `?`, `else`, or an operator, found `map`
--> $DIR/missing-dot-on-statement-expression.rs:7:29
|
LL | let _ = [1, 2, 3].iter()map(|x| x);
| ^^^ expected one of `.`, `;`, `?`, `else`, or an operator
|
help: you might have meant to write a method call
|
LL | let _ = [1, 2, 3].iter().map(|x| x);
| +
```
Instead use dcx.abort_if_error() or guar.raise_fatal() instead. These
guarantee that an error actually happened previously and thus we don't
silently abort.
Currently it relies on having the right integer for every variant, and
if you add a variant you need to adjust the integers for all subsequent
variants, which is a pain.
This commit introduces a match guard formulation that takes advantage of
the enum-to-integer conversion to avoid specifying the integer for each
variant. And it does this via a macro to avoid lots of boilerplate.
The parser pushes a `TokenType` to `Parser::expected_token_types` on
every call to the various `check`/`eat` methods, and clears it on every
call to `bump`. Some of those `TokenType` values are full tokens that
require cloning and dropping. This is a *lot* of work for something
that is only used in error messages and it accounts for a significant
fraction of parsing execution time.
This commit overhauls `TokenType` so that `Parser::expected_token_types`
can be implemented as a bitset. This requires changing `TokenType` to a
C-style parameterless enum, and adding `TokenTypeSet` which uses a
`u128` for the bits. (The new `TokenType` has 105 variants.)
The new types `ExpTokenPair` and `ExpKeywordPair` are now arguments to
the `check`/`eat` methods. This is for maximum speed. The elements in
the pairs are always statically known; e.g. a
`token::BinOp(token::Star)` is always paired with a `TokenType::Star`.
So we now compute `TokenType`s in advance and pass them in to
`check`/`eat` rather than the current approach of constructing them on
insertion into `expected_token_types`.
Values of these pair types can be produced by the new `exp!` macro,
which is used at every `check`/`eat` call site. The macro is for
convenience, allowing any pair to be generated from a single identifier.
The ident/keyword filtering in `expected_one_of_not_found` is no longer
necessary. It was there to account for some sloppiness in
`TokenKind`/`TokenType` comparisons.
The existing `TokenType` is moved to a new file `token_type.rs`, and all
its new infrastructure is added to that file. There is more boilerplate
code than I would like, but I can't see how to make it shorter.
This is a naming convention used in a handful of spots in the parser for
delimiters. It confused me when I first saw it a long time ago, and I've
never liked it. A web search says "Bra-ket notation" exists in linear
algebra but the terminology has zero prior use in a programming context,
as far as I can tell.
This commit changes it to `open`/`close`, which is consistent with the
rest of the compiler.
The most significant is `check_keyword`: it now only pushes to
`expected_token_types` if the keyword check fails, which matches how all
the other `check` methods work.
The remainder are just tweaks to make these methods more consistent with
each other.
Use field init shorthand where possible
Field init shorthand allows writing initializers like `tcx: tcx` as
`tcx`. The compiler already uses it extensively. Fix the last few places
where it isn't yet used.
EDIT: this PR also updates `rustfmt.toml` to set
`use_field_init_shorthand = true`.
Overhaul keyword handling
The compiler's list of keywords has some problems.
- It contains several items that aren't keywords.
- The order isn't quite right in a couple of places.
- Some of the names of predicates relating to keywords are confusing.
- rustdoc and rustfmt have their own (incorrect) versions of the keyword list.
- `AllKeywords` is unnecessarily complex.
r? ```@jieyouxu```
`rustc_symbol` is the source of truth for keywords.
rustdoc has its own implicit definition of keywords, via the
`is_doc_keyword`. It (presumably) intends to include all keywords, but
it omits `yeet`.
rustfmt has its own explicit list of Rust keywords. It also (presumably)
intends to include all keywords, but it omits `await`, `builtin`, `gen`,
`macro_rules`, `raw`, `reuse`, `safe`, and `yeet`. Also, it does linear
searches through this list, which is inefficient.
This commit fixes all of the above problems by introducing a new
predicate `is_any_keyword` in rustc and using it in rustdoc and rustfmt.
It documents that it's not the right predicate in most cases.
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
- Move it to `rustc_parse`, which is the only crate that uses it. This
lets us remove all the `pub` markers from it.
- Change `next_ref` and `look_ahead` to `get` and `bump`, which work
better for the `rustc_parse` uses.
- This requires adding a `TokenStream::get` method, which is simple.
- In `TokenCursor`, we currently duplicate the
`DelimSpan`/`DelimSpacing`/`Delimiter` from the surrounding
`TokenTree::Delimited` in the stack. This isn't necessary so long as
we don't prematurely move past the `Delimited`, and is a small perf
win on a very hot code path.
- In `parse_token_tree`, we clone the relevant `TokenTree::Delimited`
instead of constructing an identical one from pieces.
Because `TokenStreamIter` is a much better name for a `TokenStream`
iterator. Also rename the `TokenStream::trees` method as
`TokenStream::iter`, and some local variables.
Field init shorthand allows writing initializers like `tcx: tcx` as
`tcx`. The compiler already uses it extensively. Fix the last few places
where it isn't yet used.
Keep track of patterns that could have introduced a binding, but didn't
When we recover from a pattern parse error, or a pattern uses `..`, we keep track of that and affect resolution error for missing bindings that could have been provided by that pattern. We differentiate between `..` and parse recovery. We silence resolution errors likely caused by the pattern parse error.
```
error[E0425]: cannot find value `title` in this scope
--> $DIR/struct-pattern-with-missing-fields-resolve-error.rs:18:30
|
LL | if let Website { url, .. } = website {
| ------------------- this pattern doesn't include `title`, which is available in `Website`
LL | println!("[{}]({})", title, url);
| ^^^^^ not found in this scope
```
Fix#74863.
Remove `Lexer`'s dependency on `Parser`.
Lexing precedes parsing, as you'd expect: `Lexer` creates a `TokenStream` and `Parser` then parses that `TokenStream`.
But, in a horrendous violation of layering abstractions and common sense, `Lexer` depends on `Parser`! The `Lexer::unclosed_delim_err` method does some error recovery that relies on creating a `Parser` to do some post-processing of the `TokenStream` that the `Lexer` just created.
This commit just removes `unclosed_delim_err`. This change removes `Lexer`'s dependency on `Parser`, and also means that `lex_token_tree`'s return value can have a more typical form.
The cost is slightly worse error messages in two obscure cases, as shown in these tests:
- tests/ui/parser/brace-in-let-chain.rs: there is slightly less explanation in this case involving an extra `{`.
- tests/ui/parser/diff-markers/unclosed-delims{,-in-macro}.rs: the diff marker detection is no longer supported (because that detection is implemented in the parser).
In my opinion this cost is outweighed by the magnitude of the code cleanup.
r? ```````@chenyukang```````
When we recover from a pattern parse error, or a pattern uses `..`, we keep track of that and affect resolution error for missing bindings that could have been provided by that pattern. We differentiate between `..` and parse recovery. We silence resolution errors likely caused by the pattern parse error.
```
error[E0425]: cannot find value `title` in this scope
--> $DIR/struct-pattern-with-missing-fields-resolve-error.rs:19:30
|
LL | println!("[{}]({})", title, url);
| ^^^^^ not found in this scope
|
note: `Website` has a field `title` which could have been included in this pattern, but it wasn't
--> $DIR/struct-pattern-with-missing-fields-resolve-error.rs:17:12
|
LL | / struct Website {
LL | | url: String,
LL | | title: Option<String> ,
| | ----- defined here
LL | | }
| |_-
...
LL | if let Website { url, .. } = website {
| ^^^^^^^^^^^^^^^^^^^ this pattern doesn't include `title`, which is available in `Website`
```
Fix#74863.
Add AST support for unsafe binders
I'm splitting up #130514 into pieces. It's impossible for me to keep up with a huge PR like that. I'll land type system support for this next, probably w/o MIR lowering, which will come later.
r? `@oli-obk`
cc `@BoxyUwU` and `@lcnr` who also may want to look at this, though this PR doesn't do too much yet
Keep track of parse errors in `mod`s and don't emit resolve errors for paths involving them
When we expand a `mod foo;` and parse `foo.rs`, we now track whether that file had an unrecovered parse error that reached the end of the file. If so, we keep that information around in the HIR and mark its `DefId` in the `Resolver`. When resolving a path like `foo::bar`, we do not emit any errors for "`bar` not found in `foo`", as we know that the parse error might have caused `bar` to not be parsed and accounted for.
When this happens in an existing project, every path referencing `foo` would be an irrelevant compile error. Instead, we now skip emitting anything until `foo.rs` is fixed. Tellingly enough, we didn't have any test for errors caused by expansion of `mod`s with parse errors.
Fix https://github.com/rust-lang/rust/issues/97734.
Lexing precedes parsing, as you'd expect: `Lexer` creates a
`TokenStream` and `Parser` then parses that `TokenStream`.
But, in a horrendous violation of layering abstractions and common
sense, `Lexer` depends on `Parser`! The `Lexer::unclosed_delim_err`
method does some error recovery that relies on creating a `Parser` to do
some post-processing of the `TokenStream` that the `Lexer` just created.
This commit just removes `unclosed_delim_err`. This change removes
`Lexer`'s dependency on `Parser`, and also means that `lex_token_tree`'s
return value can have a more typical form.
The cost is slightly worse error messages in two obscure cases, as shown
in these tests:
- tests/ui/parser/brace-in-let-chain.rs: there is slightly less
explanation in this case involving an extra `{`.
- tests/ui/parser/diff-markers/unclosed-delims{,-in-macro}.rs: the diff
marker detection is no longer supported (because that detection is
implemented in the parser).
In my opinion this cost is outweighed by the magnitude of the code
cleanup.
