Fix#90546 by filtering out global value function pointer types from the
type tests, and adding the LowerTypeTests pass to the rustc LTO
optimization pipelines.
cleanup: remove pointee types
This can't be merged until the oldest LLVM version we support uses opaque pointers, which will be the case after #114148. (Also note `-Cllvm-args="-opaque-pointers=0"` can technically be used in LLVM 15, though I don't think we should support that configuration.)
I initially hoped this would provide some minor perf win, but in https://github.com/rust-lang/rust/pull/105412#issuecomment-1341224450 it had very little impact, so this is only valuable as a cleanup.
As a followup, this will enable #96242 to be resolved.
r? `@ghost`
`@rustbot` label S-blocked
After the last commit, they contain `Option<&OperandBundleDef<'a>>` but
the values are always `Some(_)`. This commit removes the needless
`Option` wrapper. This also simplifies the type signatures of
`LLVMRustBuild{Invoke,Call}`, which were relying on the fact that the
represention of `Option<&T>` is the same as `&T` for non-`None` values.
They never have a length of more than two. So this commit changes them
to `SmallVec<[_; 2]>`.
Also, we possibly push `None` values and then filter those `None` values
out again with `retain`. So this commit removes the `retain` and instead
only pushes the values if they are `Some(_)`.
use c literals in compiler and library
Use c literals #108801 in compiler and library
currently blocked on:
* <strike>rustfmt: don't know how to format c literals</strike> nope, nightly one works.
* <strike>bootstrap</strike>
r? `@ghost`
`@rustbot` blocked
These tend to have special handling in a bunch of places anyway, so the variant helps remember that. And I think it's easier to grok than non-Scalar Aggregates sometimes being `Immediates` (like I got wrong and caused 109992). As a minor bonus, it means we don't need to generate poison LLVM values for them to pass around in `OperandValue::Immediate`s.
This commit adds cross-language LLVM Control Flow Integrity (CFI)
support to the Rust compiler by adding the
`-Zsanitizer-cfi-normalize-integers` option to be used with Clang
`-fsanitize-cfi-icall-normalize-integers` for normalizing integer types
(see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust
-compiled code "mixed binaries" (i.e., for when C or C++ and Rust
-compiled code share the same virtual address space). For more
information about LLVM CFI and cross-language LLVM CFI support for the
Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and
-Zsanitizer-cfi-normalize-integers, and requires proper (i.e.,
non-rustc) LTO (i.e., -Clinker-plugin-lto).
In cases where it is legal, we should prefer poison values over
undef values.
This replaces undef with poison for aggregate construction and
for uninhabited types. There are more places where we can likely
use poison, but I wanted to stay conservative to start with.
In particular the aggregate case is important for newer LLVM
versions, which are not able to handle an undef base value during
early optimization due to poison-propagation concerns.
...and remove it from `PointeeInfo`, which isn't meant for this.
There are still various places (marked with FIXMEs) that assume all pointers
have the same size and alignment. Fixing this requires parsing non-default
address spaces in the data layout string, which will be done in a followup.
Previously, it was only put on scalars with range validity invariants
like bool, was uninit was obviously invalid for those.
Since then, we have normatively declared all uninit primitives to be
undefined behavior and can therefore put `noundef` on them.
The remaining concern was the `mem::uninitialized` function, which cause
quite a lot of UB in the older parts of the ecosystem. This function now
doesn't return uninit values anymore, making users of it safe from this
change.
The only real sources of UB where people could encounter uninit
primitives are `MaybeUninit::uninit().assume_init()`, which has always
be clear in the docs about being UB and from heap allocations (like
reading from the spare capacity of a vec. This is hopefully rare enough
to not break anything.
Use struct types during codegen in less places
This makes it easier to use cg_ssa from a backend like Cranelift that doesn't have any struct types at all. After this PR struct types are still used for function arguments and return values. Removing those usages is harder but should still be doable.
This commit adds LLVM Kernel Control Flow Integrity (KCFI) support to
the Rust compiler. It initially provides forward-edge control flow
protection for operating systems kernels for Rust-compiled code only by
aggregating function pointers in groups identified by their return and
parameter types. (See llvm/llvm-project@cff5bef.)
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by identifying C char and integer type uses at the
time types are encoded (see Type metadata in the design document in the
tracking issue #89653).
LLVM KCFI can be enabled with -Zsanitizer=kcfi.
Co-authored-by: bjorn3 <17426603+bjorn3@users.noreply.github.com>
For the next commit, `FunctionCx::codegen_*_terminator` need to take a
`&mut Bx` instead of consuming a `Bx`. This triggers a cascade of
similar changes across multiple functions. The resulting code is more
concise and replaces many `&mut bx` expressions with `bx`.
The canonical form of a usub.with.overflow check in LLVM are
separate sub + icmp instructions, rather than a usub.with.overflow
intrinsic. Using usub.with.overflow will generally result in worse
optimization potential.
The backend will attempt to form usub.with.overflow when it comes
to actual instruction selection. This is not fully reliable, but
I believe this is a better tradeoff than using the intrinsic in
IR.
Fixes#103285.
Now that we require at least LLVM 13, that codegen backend is always
using its intrinsic `fptosi.sat` and `fptoui.sat` conversions, so it
doesn't need the manual implementation. However, the GCC backend still
needs it, so we can move all of that code down there.
This commit improves the LLVM Control Flow Integrity (CFI) support in
the Rust compiler by providing forward-edge control flow protection for
Rust-compiled code only by aggregating function pointers in groups
identified by their return and parameter types.
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by identifying C char and integer type uses at the
time types are encoded (see Type metadata in the design document in the
tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e.,
-Clto).
Older llvm has the pre-C++17 restriction on success and failure memory
ordering, requiring the former to be at least as strong as the latter.
So, for llvm 12, this upgrades the success ordering to a stronger one if
necessary.
This was relying on the presence of a bitcast to avoid using the
constant global initializer for a load using a different type.
With opaque pointers, we need to check this explicitly.
Add !align metadata on loads of &/&mut/Box
Note that this refers to the alignment of what the loaded value points
to, _not_ the alignment of the loaded value itself.
r? `@ghost` (blocked on #94158)
* Add wasm64 variants for inline assembly along the same lines as wasm32
* Update a few directives in libtest to check for `target_family`
instead of `target_arch`
* Update some rustc codegen and typechecks specialized for wasm32 to
also work for wasm64.
Add LLVM CFI support to the Rust compiler
This PR adds LLVM Control Flow Integrity (CFI) support to the Rust compiler. It initially provides forward-edge control flow protection for Rust-compiled code only by aggregating function pointers in groups identified by their number of arguments.
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by defining and using compatible type identifiers (see Type metadata in the design document in the tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e., -Clto).
Thank you, `@eddyb` and `@pcc,` for all the help!
This commit adds LLVM Control Flow Integrity (CFI) support to the Rust
compiler. It initially provides forward-edge control flow protection for
Rust-compiled code only by aggregating function pointers in groups
identified by their number of arguments.
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by defining and using compatible type identifiers
(see Type metadata in the design document in the tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e.,
-Clto).
Move *_max methods back to util
change to inline instead of inline(always)
Remove valid_range_exclusive from scalar
Use WrappingRange instead
implement always_valid_for in a safer way
Fix accidental edit
Use custom wrap-around type instead of RangeInclusive
Two reasons:
1. More memory is allocated than necessary for `valid_range` in `Scalar`. The range is not used as an iterator and `exhausted` is never used.
2. `contains`, `count` etc. methods in `RangeInclusive` are doing very unhelpful(and dangerous!) things when used as a wrap-around range. - In general this PR wants to limit potentially confusing methods, that have a low probability of working.
Doing a local perf run, every metric shows improvement except for instructions.
Max-rss seem to have a very consistent improvement.
Sorry - newbie here, probably doing something wrong.
Rather than relying on `getPointerElementType()` from LLVM function
pointers, we now pass the function type explicitly when building `call`
or `invoke` instructions.
Use existing declaration of rust_eh_personality
If crate declares `rust_eh_personality`, re-use existing declaration
as otherwise attempts to set function attributes that follow the
declaration will fail (unless it happens to have exactly the same
type signature as the one predefined in the compiler).
Fixes#70117.
Fixes https://github.com/rust-lang/rust/pull/81469#issuecomment-809428126; probably.
This makes load generation compatible with opaque pointers.
The generation of nontemporal copies still accesses the pointer
element type, as fixing this requires more movement.
This commit updates rustc, with an applicable LLVM version, to use
LLVM's new `llvm.fpto{u,s}i.sat.*.*` intrinsics to implement saturating
floating-point-to-int conversions. This results in a little bit tighter
codegen for x86/x86_64, but the main purpose of this is to prepare for
upcoming changes to the WebAssembly backend in LLVM where wasm's
saturating float-to-int instructions will now be implemented with these
intrinsics.
This change allows simplifying a good deal of surrounding code, namely
removing a lot of wasm-specific behavior. WebAssembly no longer has any
special-casing of saturating arithmetic instructions and the need for
`fptoint_may_trap` is gone and all handling code for that is now
removed. This means that the only wasm-specific logic is in the
`fpto{s,u}i` instructions which only get used for "out of bounds is
undefined behavior". This does mean that for the WebAssembly target
specifically the Rust compiler will no longer be 100% compatible with
pre-LLVM 12 versions, but it seems like that's unlikely to be relied on
by too many folks.
Note that this change does immediately regress the codegen of saturating
float-to-int casts on WebAssembly due to the specialization of the LLVM
intrinsic not being present in our LLVM fork just yet. I'll be following
up with an LLVM update to pull in those patches, but affects a few other
SIMD things in flight for WebAssembly so I wanted to separate this change.
Eventually the entire `cast_float_to_int` function can be removed when
LLVM 12 is the minimum version, but that will require sinking the
complexity of it into other backends such as Cranelfit.
`fast-math` implies things like functions not being able to accept as an
argument or return as a result, say, `inf` which made these functions
confusingly named or behaving incorrectly, depending on how you
interpret it. Since the time when these intrinsics have been implemented
the intrinsics user's (stdsimd) approach has changed significantly and
so now it is required that these intrinsics operate normally rather than
in "whatever" way.
Fixes#84268
