lints: mostly translatable diagnostics
As lints are created slightly differently than other diagnostics, intended to try make them translatable first and then look into the applicability of diagnostic structs but ended up just making most of the diagnostics in the crate translatable (which will still be useful if I do make a lot of them structs later anyway).
r? ``@compiler-errors``
Accept `DiagnosticMessage` in `LintDiagnosticBuilder::build` so that
lints can be built with translatable diagnostic messages.
Signed-off-by: David Wood <david.wood@huawei.com>
Hide irrelevant lines in suggestions to allow for suggestions that are far from each other to be shown
This is an attempt to fix suggestions one part of which is 6 lines or more far from the first. I've noticed "the problem" (of not showing some parts of the suggestion) here: https://github.com/rust-lang/rust/pull/97759#discussion_r889689230.
I'm not sure about the implementation (this big closure is just bad and makes already complicated code even more so), but I want to at least discuss the result.
Here is an example of how this changes the output:
Before:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
5 |
6 |
7 |
8 |
...
```
After:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
...
31|
32~ } };
|
```
r? `@estebank`
`@rustbot` label +A-diagnostics +A-suggestion-diagnostics
Previously we only show at most 6 lines of suggestions and, if the
suggestions are more than 6 lines apart, we've just showed ... at the
end. This is probably fine, but quite confusing in my opinion.
This commit is an attempt to show ... in places where there is nothing
to suggest instead, for example:
Before:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
5 |
6 |
7 |
8 |
...
```
After:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
...
31|
32~ } };
|
```
Support lint expectations for `--force-warn` lints (RFC 2383)
Rustc has a `--force-warn` flag, which overrides lint level attributes and forces the diagnostics to always be warn. This means, that for lint expectations, the diagnostic can't be suppressed as usual. This also means that the expectation would not be fulfilled, even if a lint had been triggered in the expected scope.
This PR now also tracks the expectation ID in the `ForceWarn` level. I've also made some minor adjustments, to possibly catch more bugs and make the whole implementation more robust.
This will probably conflict with https://github.com/rust-lang/rust/pull/97718. That PR should ideally be reviewed and merged first. The conflict itself will be trivial to fix.
---
r? `@wesleywiser`
cc: `@flip1995` since you've helped with the initial review and also discussed this topic with me. 🙃
Follow-up of: https://github.com/rust-lang/rust/pull/87835
Issue: https://github.com/rust-lang/rust/issues/85549
Yeah, and that's it.
lint: add diagnostic translation migration lints
Introduce allow-by-default lints for checking whether diagnostics are written in
`SessionDiagnostic` or `AddSubdiagnostic` impls and whether diagnostics are translatable. These lints can be denied for modules once they are fully migrated to impls and translation.
These lints are intended to be temporary - once all diagnostics have been changed then we can just change the APIs we have and that will enforce these constraints thereafter.
r? `````@oli-obk`````
Introduce allow-by-default lints for checking whether diagnostics are
written in `SessionDiagnostic`/`AddSubdiagnostic` impls and whether
diagnostics are translatable. These lints can be denied for modules once
they are fully migrated to impls and translation.
Signed-off-by: David Wood <david.wood@huawei.com>
Fix `delayed_good_path_bug` ice for expected diagnostics (RFC 2383)
Fixes a small ICE with the `delayed_good_path_bug` check.
---
r? ``@wesleywiser``
cc: ``@eddyb`` this might be interesting, since you've added a `FIXME` comment above the modified check which kind of discusses a case like this
closes: https://github.com/rust-lang/rust/issues/95540
cc: https://github.com/rust-lang/rust/issues/85549
Remove migrate borrowck mode
Closes#58781Closes#43234
# Stabilization proposal
This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile.
Tracking issue: #43234
RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md
Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable).
## Motivation
Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors.
The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition.
In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker.
In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver.
While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff.
## What is stabilized
As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise.
There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](https://github.com/rust-lang/rust/issues/95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl.
As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions.
## What isn't stabilized
This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck.
## Tests
Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll`
## History
* On 2017-07-14, [tracking issue opened](https://github.com/rust-lang/rust/issues/43234)
* On 2017-07-20, [initial empty MIR pass added](https://github.com/rust-lang/rust/pull/43271)
* On 2017-08-29, [RFC opened](https://github.com/rust-lang/rfcs/pull/2094)
* On 2017-11-16, [Integrate MIR type-checker with NLL](https://github.com/rust-lang/rust/pull/45825)
* On 2017-12-20, [NLL feature complete](https://github.com/rust-lang/rust/pull/46862)
* On 2018-07-07, [Don't run AST borrowck on mir mode](https://github.com/rust-lang/rust/pull/52083)
* On 2018-07-27, [Add migrate mode](https://github.com/rust-lang/rust/pull/52681)
* On 2019-04-22, [Enable migrate mode on 2015 edition](https://github.com/rust-lang/rust/pull/59114)
* On 2019-08-26, [Don't downgrade errors on 2015 edition](https://github.com/rust-lang/rust/pull/64221)
* On 2019-08-27, [Remove AST borrowck](https://github.com/rust-lang/rust/pull/64790)
Replace `&Vec<_>`s with `&[_]`s
It's generally preferable to use `&[_]` since it's one less indirection and it can be created from types other that `Vec`.
I've left `&Vec` in some locals where it doesn't really matter, in cases where `TypeFoldable` is expected (`TypeFoldable: Clone` so slice can't implement it) and in cases where it's `&TypeAliasThatIsActiallyVec`. Nothing important, really, I was just a little annoyed by `visit_generic_param_vec` :D
r? `@compiler-errors`
errors: simplify referring to fluent attributes
To render the message of a Fluent attribute, the identifier of the Fluent message must be known. `DiagnosticMessage::FluentIdentifier` contains both the message's identifier and optionally the identifier of an attribute. Generated constants for each attribute would therefore need to be named uniquely (amongst all error messages) or be able to refer to only the attribute identifier which will be combined with a message identifier later. In this commit, the latter strategy is implemented as part of the `Diagnostic` type's functions for adding subdiagnostics of various kinds.
r? `@oli-obk`
To render the message of a Fluent attribute, the identifier of the
Fluent message must be known. `DiagnosticMessage::FluentIdentifier`
contains both the message's identifier and optionally the identifier of
an attribute. Generated constants for each attribute would therefore
need to be named uniquely (amongst all error messages) or be able to
refer to only the attribute identifier which will be combined with a
message identifier later. In this commit, the latter strategy is
implemented as part of the `Diagnostic` type's functions for adding
subdiagnostics of various kinds.
Signed-off-by: David Wood <david.wood@huawei.com>
Adds a new `fluent_messages` macro which performs compile-time
validation of the compiler's Fluent resources (i.e. that the resources
parse and don't multiply define the same messages) and generates
constants that make using those messages in diagnostics more ergonomic.
For example, given the following invocation of the macro..
```ignore (rust)
fluent_messages! {
typeck => "./typeck.ftl",
}
```
..where `typeck.ftl` has the following contents..
```fluent
typeck-field-multiply-specified-in-initializer =
field `{$ident}` specified more than once
.label = used more than once
.label-previous-use = first use of `{$ident}`
```
...then the macro parse the Fluent resource, emitting a diagnostic if it
fails to do so, and will generate the following code:
```ignore (rust)
pub static DEFAULT_LOCALE_RESOURCES: &'static [&'static str] = &[
include_str!("./typeck.ftl"),
];
mod fluent_generated {
mod typeck {
pub const field_multiply_specified_in_initializer: DiagnosticMessage =
DiagnosticMessage::fluent("typeck-field-multiply-specified-in-initializer");
pub const field_multiply_specified_in_initializer_label_previous_use: DiagnosticMessage =
DiagnosticMessage::fluent_attr(
"typeck-field-multiply-specified-in-initializer",
"previous-use-label"
);
}
}
```
When emitting a diagnostic, the generated constants can be used as
follows:
```ignore (rust)
let mut err = sess.struct_span_err(
span,
fluent::typeck::field_multiply_specified_in_initializer
);
err.span_default_label(span);
err.span_label(
previous_use_span,
fluent::typeck::field_multiply_specified_in_initializer_label_previous_use
);
err.emit();
```
Signed-off-by: David Wood <david.wood@huawei.com>
Manual implementors of translatable diagnostics will need to call
`set_arg`, not just the derive, so make this function a bit more
ergonomic by taking `IntoDiagnosticArg` rather than
`DiagnosticArgValue`.
Signed-off-by: David Wood <david.wood@huawei.com>
Add a new derive, `#[derive(SessionSubdiagnostic)]`, which enables
deriving structs for labels, notes, helps and suggestions.
Signed-off-by: David Wood <david.wood@huawei.com>
Change `span_suggestion` (and variants) to take `impl ToString` rather
than `String` for the suggested code, as this simplifies the
requirements on the diagnostic derive.
Signed-off-by: David Wood <david.wood@huawei.com>
Since Cargo wants to do its own fatal error handling for unused
dependencies, add the option `--json unused-externs-silent` which
has the original behaviour of not indicating non-zero exit status for
`deny`/`forbid`-level unused dependencies.
Remove `--extern-location` and all associated code
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
Loading the fallback bundle in compilation sessions that won't go on to
emit any errors unnecessarily degrades compile time performance, so
lazily create the Fluent bundle when it is first required.
Signed-off-by: David Wood <david.wood@huawei.com>
Add an option for enabling and disabling Fluent's directionality
isolation markers in output. Disabled by default as these can render in
some terminals and applications.
Signed-off-by: David Wood <david.wood@huawei.com>
Extends support for generating `DiagnosticMessage::FluentIdentifier`
messages from `SessionDiagnostic` derive to `#[label]`.
Signed-off-by: David Wood <david.wood@huawei.com>
Non-subdiagnostic fields (i.e. those that don't have `#[label]`
attributes or similar and are just additional context) have to be added
as arguments for Fluent messages to refer them. This commit extends the
`SessionDiagnostic` derive to do this for all fields that do not have
attributes and introduces an `IntoDiagnosticArg` trait that is
implemented on all types that can be converted to a argument for Fluent.
Signed-off-by: David Wood <david.wood@huawei.com>
Extend loading of Fluent bundles so that bundles can be loaded from the
sysroot based on the language requested by the user, or using a nightly
flag.
Sysroot bundles are loaded from `$sysroot/share/locale/$locale/*.ftl`.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit updates the signatures of all diagnostic functions to accept
types that can be converted into a `DiagnosticMessage`. This enables
existing diagnostic calls to continue to work as before and Fluent
identifiers to be provided. The `SessionDiagnostic` derive just
generates normal diagnostic calls, so these APIs had to be modified to
accept Fluent identifiers.
In addition, loading of the "fallback" Fluent bundle, which contains the
built-in English messages, has been implemented.
Each diagnostic now has "arguments" which correspond to variables in the
Fluent messages (necessary to render a Fluent message) but no API for
adding arguments has been added yet. Therefore, diagnostics (that do not
require interpolation) can be converted to use Fluent identifiers and
will be output as before.
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
Introduce a `DiagnosticMessage` type that will enable diagnostic
messages to be simple strings or Fluent identifiers.
`DiagnosticMessage` is now used in the implementation of the standard
`DiagnosticBuilder` APIs.
Signed-off-by: David Wood <david.wood@huawei.com>
When encountering an unsatisfied trait bound, if there are no other
suggestions, mention all the types that *do* implement that trait:
```
error[E0277]: the trait bound `f32: Foo` is not satisfied
--> $DIR/impl_wf.rs:22:6
|
LL | impl Baz<f32> for f32 { }
| ^^^^^^^^ the trait `Foo` is not implemented for `f32`
|
= help: the following other types implement trait `Foo`:
Option<T>
i32
str
note: required by a bound in `Baz`
--> $DIR/impl_wf.rs:18:31
|
LL | trait Baz<U: ?Sized> where U: Foo { }
| ^^^ required by this bound in `Baz`
```
Mention implementers of traits in `ImplObligation`s.
Do not mention other `impl`s for closures, ranges and `?`.
There are a few places were we have to construct it, though, and a few
places that are more invasive to change. To do this, we create a
constructor with a long obvious name.
Improve `expect` impl and handle `#[expect(unfulfilled_lint_expectations)]` (RFC 2383)
This PR updates unstable `ExpectationIds` in stashed diagnostics and adds some asserts to ensure that the stored expectations are really empty in the end. Additionally, it handles the `#[expect(unfulfilled_lint_expectations)]` case.
According to the [Errors and lints docs](https://rustc-dev-guide.rust-lang.org/diagnostics.html#diagnostic-levels) the `error` level should only be used _"when the compiler detects a problem that makes it unable to compile the program"_. As this isn't the case with `#[expect(unfulfilled_lint_expectations)]` I decided to only create a warning. To avoid adding a new lint only for this case, I simply emit a `unfulfilled_lint_expectations` diagnostic with an additional note.
---
r? `@wesleywiser` I'm requesting a review from you since you reviewed the previous PR https://github.com/rust-lang/rust/pull/87835. You are welcome to reassign it if you're busy 🙃
rfc: [RFC-2383](https://rust-lang.github.io/rfcs/2383-lint-reasons.html)
tracking issue: https://github.com/rust-lang/rust/issues/85549
cc: `@flip1995` In case you're also interested in this :)
This updates the standard library's documentation to use the new syntax. The
documentation is worthwhile to update as it should be more idiomatic
(particularly for features like this, which are nice for users to get acquainted
with). The general codebase is likely more hassle than benefit to update: it'll
hurt git blame, and generally updates can be done by folks updating the code if
(and when) that makes things more readable with the new format.
A few places in the compiler and library code are updated (mostly just due to
already having been done when this commit was first authored).
Implementation of the `expect` attribute (RFC 2383)
This is an implementation of the `expect` attribute as described in [RFC-2383](https://rust-lang.github.io/rfcs/2383-lint-reasons.html). The attribute allows the suppression of lint message by expecting them. Unfulfilled lint expectations (meaning no expected lint was caught) will emit the `unfulfilled_lint_expectations` lint at the `expect` attribute.
### Example
#### input
```rs
// required feature flag
#![feature(lint_reasons)]
#[expect(unused_mut)] // Will warn about an unfulfilled expectation
#[expect(unused_variables)] // Will be fulfilled by x
fn main() {
let x = 0;
}
```
#### output
```txt
warning: this lint expectation is unfulfilled
--> $DIR/trigger_lint.rs:3:1
|
LL | #[expect(unused_mut)] // Will warn about an unfulfilled expectation
| ^^^^^^^^^^
|
= note: `#[warn(unfulfilled_lint_expectations)]` on by default
```
### Implementation
This implementation introduces `Expect` as a new lint level for diagnostics, which have been expected. All lint expectations marked via the `expect` attribute are collected in the [`LintLevelsBuilder`] and assigned an ID that is stored in the new lint level. The `LintLevelsBuilder` stores all found expectations and the data needed to emit the `unfulfilled_lint_expectations` in the [`LintLevelsMap`] which is the result of the [`lint_levels()`] query.
The [`rustc_errors::HandlerInner`] is the central error handler in rustc and handles the emission of all diagnostics. Lint message with the level `Expect` are suppressed during this emission, while the expectation ID is stored in a set which marks them as fulfilled. The last step is then so simply check if all expectations collected by the [`LintLevelsBuilder`] in the [`LintLevelsMap`] have been marked as fulfilled in the [`rustc_errors::HandlerInner`]. Otherwise, a new lint message will be emitted.
The implementation of the `LintExpectationId` required some special handling to make it stable between sessions. Lints can be emitted during [`EarlyLintPass`]es. At this stage, it's not possible to create a stable identifier. The level instead stores an unstable identifier, which is later converted to a stable `LintExpectationId`.
### Followup TO-DOs
All open TO-DOs have been marked with `FIXME` comments in the code. This is the combined list of them:
* [ ] The current implementation doesn't cover cases where the `unfulfilled_lint_expectations` lint is actually expected by another `expect` attribute.
* This should be easily possible, but I wanted to get some feedback before putting more work into this.
* This could also be done in a new PR to not add to much more code to this one
* [ ] Update unstable documentation to reflect this change.
* [ ] Update unstable expectation ids in [`HandlerInner::stashed_diagnostics`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_errors/struct.HandlerInner.html#structfield.stashed_diagnostics)
### Open questions
I also have a few open questions where I would like to get feedback on:
1. The RFC discussion included a suggestion to change the `expect` attribute to something else. (Initiated by `@Ixrec` [here](https://github.com/rust-lang/rfcs/pull/2383#issuecomment-378424091), suggestion from `@scottmcm` to use `#[should_lint(...)]` [here](https://github.com/rust-lang/rfcs/pull/2383#issuecomment-378648877)). No real conclusion was drawn on that point from my understanding. Is this still open for discussion, or was this discarded with the merge of the RFC?
2. How should the expect attribute deal with the new `force-warn` lint level?
---
This approach was inspired by a discussion with `@LeSeulArtichaut.`
RFC tracking issue: #54503
Mentoring/Implementation issue: #85549
[`LintLevelsBuilder`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_lint/levels/struct.LintLevelsBuilder.html
[`LintLevelsMap`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/lint/struct.LintLevelMap.html
[`lint_levels()`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/context/struct.TyCtxt.html#method.lint_levels
[`rustc_errors::HandlerInner`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_errors/struct.HandlerInner.html
[`EarlyLintPass`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_lint/trait.EarlyLintPass.html
Only create a single expansion for each inline integration.
The inlining integrator used to create one expansion for each span from the callee body.
This PR reverses the logic to create a single expansion for the whole call,
which is more consistent with how macro expansions work for macros.
This should remove the large memory regression in #91743.
rustc_errors: let `DiagnosticBuilder::emit` return a "guarantee of emission".
That is, `DiagnosticBuilder` is now generic over the return type of `.emit()`, so we'll now have:
* `DiagnosticBuilder<ErrorReported>` for error (incl. fatal/bug) diagnostics
* can only be created via a `const L: Level`-generic constructor, that limits allowed variants via a `where` clause, so not even `rustc_errors` can accidentally bypass this limitation
* asserts `diagnostic.is_error()` on emission, just in case the construction restriction was bypassed (e.g. by replacing the whole `Diagnostic` inside `DiagnosticBuilder`)
* `.emit()` returns `ErrorReported`, as a "proof" token that `.emit()` was called
(though note that this isn't a real guarantee until after completing the work on
#69426)
* `DiagnosticBuilder<()>` for everything else (warnings, notes, etc.)
* can also be obtained from other `DiagnosticBuilder`s by calling `.forget_guarantee()`
This PR is a companion to other ongoing work, namely:
* #69426
and it's ongoing implementation:
#93222
the API changes in this PR are needed to get statically-checked "only errors produce `ErrorReported` from `.emit()`", but doesn't itself provide any really strong guarantees without those other `ErrorReported` changes
* #93244
would make the choices of API changes (esp. naming) in this PR fit better overall
In order to be able to let `.emit()` return anything trustable, several changes had to be made:
* `Diagnostic`'s `level` field is now private to `rustc_errors`, to disallow arbitrary "downgrade"s from "some kind of error" to "warning" (or anything else that doesn't cause compilation to fail)
* it's still possible to replace the whole `Diagnostic` inside the `DiagnosticBuilder`, sadly, that's harder to fix, but it's unlikely enough that we can paper over it with asserts on `.emit()`
* `.cancel()` now consumes `DiagnosticBuilder`, preventing `.emit()` calls on a cancelled diagnostic
* it's also now done internally, through `DiagnosticBuilder`-private state, instead of having a `Level::Cancelled` variant that can be read (or worse, written) by the user
* this removes a hazard of calling `.cancel()` on an error then continuing to attach details to it, and even expect to be able to `.emit()` it
* warnings were switched to *only* `can_emit_warnings` on emission (instead of pre-cancelling early)
* `struct_dummy` was removed (as it relied on a pre-`Cancelled` `Diagnostic`)
* since `.emit()` doesn't consume the `DiagnosticBuilder` <sub>(I tried and gave up, it's much more work than this PR)</sub>,
we have to make `.emit()` idempotent wrt the guarantees it returns
* thankfully, `err.emit(); err.emit();` can return `ErrorReported` both times, as the second `.emit()` call has no side-effects *only* because the first one did do the appropriate emission
* `&mut Diagnostic` is now used in a lot of function signatures, which used to take `&mut DiagnosticBuilder` (in the interest of not having to make those functions generic)
* the APIs were already mostly identical, allowing for low-effort porting to this new setup
* only some of the suggestion methods needed some rework, to have the extra `DiagnosticBuilder` functionality on the `Diagnostic` methods themselves (that change is also present in #93259)
* `.emit()`/`.cancel()` aren't available, but IMO calling them from an "error decorator/annotator" function isn't a good practice, and can lead to strange behavior (from the caller's perspective)
* `.downgrade_to_delayed_bug()` was added, letting you convert any `.is_error()` diagnostic into a `delay_span_bug` one (which works because in both cases the guarantees available are the same)
This PR should ideally be reviewed commit-by-commit, since there is a lot of fallout in each.
r? `@estebank` cc `@Manishearth` `@nikomatsakis` `@mark-i-m`
This is no longer used by the compiler itself, and removing this support opens
the door to massively simplifying the Decodable/Decoder API by dropping the
self-describing deserialization support (necessary for JSON).
`Decoder` has two impls:
- opaque: this impl is already partly infallible, i.e. in some places it
currently panics on failure (e.g. if the input is too short, or on a
bad `Result` discriminant), and in some places it returns an error
(e.g. on a bad `Option` discriminant). The number of places where
either happens is surprisingly small, just because the binary
representation has very little redundancy and a lot of input reading
can occur even on malformed data.
- json: this impl is fully fallible, but it's only used (a) for the
`.rlink` file production, and there's a `FIXME` comment suggesting it
should change to a binary format, and (b) in a few tests in
non-fundamental ways. Indeed #85993 is open to remove it entirely.
And the top-level places in the compiler that call into decoding just
abort on error anyway. So the fallibility is providing little value, and
getting rid of it leads to some non-trivial performance improvements.
Much of this commit is pretty boring and mechanical. Some notes about
a few interesting parts:
- The commit removes `Decoder::{Error,error}`.
- `InternIteratorElement::intern_with`: the impl for `T` now has the same
optimization for small counts that the impl for `Result<T, E>` has,
because it's now much hotter.
- Decodable impls for SmallVec, LinkedList, VecDeque now all use
`collect`, which is nice; the one for `Vec` uses unsafe code, because
that gave better perf on some benchmarks.
Replace usages of vec![].into_iter with [].into_iter
`[].into_iter` is idiomatic over `vec![].into_iter` because its simpler and faster (unless the vec is optimized away in which case it would be the same)
So we should change all the implementation, documentation and tests to use it.
I skipped:
* `src/tools` - Those are copied in from upstream
* `src/test/ui` - Hard to tell if `vec![].into_iter` was used intentionally or not here and not much benefit to changing it.
* any case where `vec![].into_iter` was used because we specifically needed a `Vec::IntoIter<T>`
* any case where it looked like we were intentionally using `vec![].into_iter` to test it.
Mak DefId to AccessLevel map in resolve for export
hir_id to accesslevel in resolve and applied in privacy
using local def id
removing tracing probes
making function not recursive and adding comments
Move most of Exported/Public res to rustc_resolve
moving public/export res to resolve
fix missing stability attributes in core, std and alloc
move code to access_levels.rs
return for some kinds instead of going through them
Export correctness, macro changes, comments
add comment for import binding
add comment for import binding
renmae to access level visitor, remove comments, move fn as closure, remove new_key
fmt
fix rebase
fix rebase
fmt
fmt
fix: move macro def to rustc_resolve
fix: reachable AccessLevel for enum variants
fmt
fix: missing stability attributes for other architectures
allow unreachable pub in rustfmt
fix: missing impl access level + renaming export to reexport
Missing impl access level was found thanks to a test in clippy
This was a regression from https://github.com/rust-lang/rust/pull/87337;
the `panic_if_treat_err_as_bug` function only checked the number of hard
errors, not the number of lint errors.
The only reason to use `abort_if_errors` is when the program is so broken that either:
1. later passes get confused and ICE
2. any diagnostics from later passes would be noise
This is never the case for lints, because the compiler has to be able to deal with `allow`-ed lints.
So it can continue to lint and compile even if there are lint errors.
Report fatal lexer errors in `--cfg` command line arguments
Fixes#89358. The erroneous behavior was apparently introduced by `@Mark-Simulacrum` in a678e31911; the idea is to silence individual parser errors and instead emit one catch-all error message after parsing. However, for the example in #89358, a fatal lexer error is created here:
edebf77e00/compiler/rustc_parse/src/lexer/mod.rs (L340-L349)
This fatal error aborts the compilation, and so the call to `new_parser_from_source_str()` never returns and the catch-all error message is never emitted. I have therefore changed the `SilentEmitter` to silence only non-fatal errors; with my changes, for the rustc invocation described in #89358:
```sh
rustc --cfg "abc\""
```
I get the following output:
```
error[E0765]: unterminated double quote string
|
= note: this error occurred on the command line: `--cfg=abc"`
```
Adopt let_else across the compiler
This performs a substitution of code following the pattern:
```
let <id> = if let <pat> = ... { identity } else { ... : ! };
```
To simplify it to:
```
let <pat> = ... { identity } else { ... : ! };
```
By adopting the `let_else` feature (cc #87335).
The PR also updates the syn crate because the currently used version of the crate doesn't support `let_else` syntax yet.
Note: Generally I'm the person who *removes* usages of unstable features from the compiler, not adds more usages of them, but in this instance I think it hopefully helps the feature get stabilized sooner and in a better state. I have written a [comment](https://github.com/rust-lang/rust/issues/87335#issuecomment-944846205) on the tracking issue about my experience and what I feel could be improved before stabilization of `let_else`.
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
In `splice_lines`, there is some arithmetic to compute the required
alignment such that future substitutions in a suggestion are aligned
correctly. However, this assumed that the current substitution's span
was only on a single line. In circumstances where this was not true, it
could result in a arithmetic overflow when the substitution's end
column was less than the substitution's start column.
Signed-off-by: David Wood <david.wood@huawei.com>
"Fix" an overflow in byte position math
r? `@estebank`
help! I fixed the ICE only to brick the diagnostic.
I mean, it was wrong previously (using an already expanded macro span), but it is really bad now XD
Use smaller spans for some structured suggestions
Use more accurate suggestion spans for
* argument parse error
* fully qualified path
* missing code block type
* numeric casts
* On suggestions that include deletions, use a diff inspired output format
* When suggesting addition, use `+` as underline
* Color highlight modified span
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
# Stabilization report
## Summary
This stabilizes using macro expansion in key-value attributes, like so:
```rust
#[doc = include_str!("my_doc.md")]
struct S;
#[path = concat!(env!("OUT_DIR"), "/generated.rs")]
mod m;
```
See the changes to the reference for details on what macros are allowed;
see Petrochenkov's excellent blog post [on internals](https://internals.rust-lang.org/t/macro-expansion-points-in-attributes/11455)
for alternatives that were considered and rejected ("why accept no more
and no less?")
This has been available on nightly since 1.50 with no major issues.
## Notes
### Accepted syntax
The parser accepts arbitrary Rust expressions in this position, but any expression other than a macro invocation will ultimately lead to an error because it is not expected by the built-in expression forms (e.g., `#[doc]`). Note that decorators and the like may be able to observe other expression forms.
### Expansion ordering
Expansion of macro expressions in "inert" attributes occurs after decorators have executed, analogously to macro expressions appearing in the function body or other parts of decorator input.
There is currently no way for decorators to accept macros in key-value position if macro expansion must be performed before the decorator executes (if the macro can simply be copied into the output for later expansion, that can work).
## Test cases
- https://github.com/rust-lang/rust/blob/master/src/test/ui/attributes/key-value-expansion-on-mac.rs
- https://github.com/rust-lang/rust/blob/master/src/test/rustdoc/external-doc.rs
The feature has also been dogfooded extensively in the compiler and
standard library:
- https://github.com/rust-lang/rust/pull/83329
- https://github.com/rust-lang/rust/pull/83230
- https://github.com/rust-lang/rust/pull/82641
- https://github.com/rust-lang/rust/pull/80534
## Implementation history
- Initial proposal: https://github.com/rust-lang/rust/issues/55414#issuecomment-554005412
- Experiment to see how much code it would break: https://github.com/rust-lang/rust/pull/67121
- Preliminary work to restrict expansion that would conflict with this
feature: https://github.com/rust-lang/rust/pull/77271
- Initial implementation: https://github.com/rust-lang/rust/pull/78837
- Fix for an ICE: https://github.com/rust-lang/rust/pull/80563
## Unresolved Questions
~~https://github.com/rust-lang/rust/pull/83366#issuecomment-805180738 listed some concerns, but they have been resolved as of this final report.~~
## Additional Information
There are two workarounds that have a similar effect for `#[doc]`
attributes on nightly. One is to emulate this behavior by using a limited version of this feature that was stabilized for historical reasons:
```rust
macro_rules! forward_inner_docs {
($e:expr => $i:item) => {
#[doc = $e]
$i
};
}
forward_inner_docs!(include_str!("lib.rs") => struct S {});
```
This also works for other attributes (like `#[path = concat!(...)]`).
The other is to use `doc(include)`:
```rust
#![feature(external_doc)]
#[doc(include = "lib.rs")]
struct S {}
```
The first works, but is non-trivial for people to discover, and
difficult to read and maintain. The second is a strange special-case for
a particular use of the macro. This generalizes it to work for any use
case, not just including files.
I plan to remove `doc(include)` when this is stabilized. The
`forward_inner_docs` workaround will still compile without warnings, but
I expect it to be used less once it's no longer necessary.
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
Fix suggestions for missing return type lifetime specifiers
This pull request aims to fix#84592. The issue is that the current code seems to assume that there is only a single relevant span pointing to the missing lifetime, and only looks at the first one:
e5f83d24ae/compiler/rustc_resolve/src/late/lifetimes.rs (L2959)
This is incorrect, though, and leads to incorrect error messages and invalid suggestions. For instance, the example from #84592:
```rust
struct TwoLifetimes<'x, 'y> {
x: &'x (),
y: &'y (),
}
fn two_lifetimes_needed(a: &(), b: &()) -> TwoLifetimes<'_, '_> {
TwoLifetimes { x: &(), y: &() }
}
```
currently leads to:
```
error[E0106]: missing lifetime specifiers
--> src/main.rs:6:57
|
6 | fn two_lifetimes_needed(a: &(), b: &()) -> TwoLifetimes<'_, '_> {
| --- --- ^^ expected 2 lifetime parameters
|
= help: this function's return type contains a borrowed value, but the signature does not say whether it is borrowed from `a` or `b`
help: consider introducing a named lifetime parameter
|
6 | fn two_lifetimes_needed<'a>(a: &'a (), b: &'a ()) -> TwoLifetimes<'_<'a, 'a>, '_> {
| ^^^^ ^^^^^^ ^^^^^^ ^^^^^^^^^^
```
There are two problems:
- The error message is wrong. There is only _one_ lifetime parameter expected at the location pointed to by the error message (and another one at a separate location).
- The suggestion is incorrect and will not lead to correct code.
With the changes in this PR, I get the following output:
```
error[E0106]: missing lifetime specifiers
--> p.rs:6:57
|
6 | fn two_lifetimes_needed(a: &(), b: &()) -> TwoLifetimes<'_, '_> {
| --- --- ^^ ^^ expected named lifetime parameter
| |
| expected named lifetime parameter
|
= help: this function's return type contains a borrowed value, but the signature does not say whether it is borrowed from `a` or `b`
help: consider introducing a named lifetime parameter
|
6 | fn two_lifetimes_needed<'a>(a: &'a (), b: &'a ()) -> TwoLifetimes<'a, 'a> {
| ^^^^ ^^^^^^ ^^^^^^ ^^ ^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0106`.
```
Mainly, I changed `add_missing_lifetime_specifiers_label()` to receive a _vector_ of spans (and counts) instead of just one, and adjusted its body accordingly.
This defers backtrace formatting to the point where we
actually want to flush delayed diagnostics. If they are discarded
before that point then we can avoid invoking the backtrace formatting
machinery which will parse debug info and symbol tables.
for debuginfo=2 this leads to a 20% walltime reduction of the UI testsuite
Add an unstable --json=unused-externs flag to print unused externs
This adds an unstable flag to print a list of the extern names not used by cargo.
This PR will enable cargo to collect unused dependencies from all units and provide warnings.
The companion PR to cargo is: https://github.com/rust-lang/cargo/pull/8437
The goal is eventual stabilization of this flag in rustc as well as in cargo.
Discussion of this feature is mostly contained inside these threads: #57274#72342#72603
The feature builds upon the internal datastructures added by #72342
Externs are uniquely identified by name and the information is sufficient for cargo.
If the mode is enabled, rustc will print json messages like:
```
{"unused_extern_names":["byteorder","openssl","webpki"]}
```
For a crate that got passed byteorder, openssl and webpki dependencies but needed none of them.
### Q: Why not pass -Wunused-crate-dependencies?
A: See [ehuss's comment here](https://github.com/rust-lang/rust/issues/57274#issuecomment-624839355)
TLDR: it's cleaner. Rust's warning system wasn't built to be filtered or edited by cargo.
Even a basic implementation of the feature would have to change the "n warnings emitted" line that rustc prints at the end.
Cargo ideally wants to synthesize its own warnings anyways. For example, it would be hard for rustc to emit warnings like
"dependency foo is only used by dev targets", suggesting to make it a dev-dependency instead.
### Q: Make rustc emit used or unused externs?
A: Emitting used externs has the advantage that it simplifies cargo's collection job.
However, emitting unused externs creates less data to be communicated between rustc and cargo.
Often you want to paste a cargo command obtained from `cargo build -vv` for doing something
completely unrelated. The message is emitted always, even if no warning or error is emitted.
At that point, even this tiny difference in "noise" matters. That's why I went with emitting unused externs.
### Q: One json msg per extern or a collective json msg?
A: Same as above, the data format should be concise. Having 30 lines for the 30 crates a crate uses would be disturbing to readers.
Also it helps the cargo implementation to know that there aren't more unused deps coming.
### Q: Why use names of externs instead of e.g. paths?
A: Names are both sufficient as well as neccessary to uniquely identify a passed `--extern` arg.
Names are sufficient because you *must* pass a name when passing an `--extern` arg.
Passing a path is optional on the other hand so rustc might also figure out a crate's location from the file system.
You can also put multiple paths for the same extern name, via e.g. `--extern hello=/usr/lib/hello.rmeta --extern hello=/usr/local/lib/hello.rmeta`,
but rustc will only ever use one of those paths.
Also, paths don't identify a dependency uniquely as it is possible to have multiple different extern names point to the same path.
So paths are ill-suited for identification.
### Q: What about 2015 edition crates?
A: They are fully supported.
Even on the 2015 edition, an explicit `--extern` flag is is required to enable `extern crate foo;` to work (outside of sysroot crates, which this flag doesn't warn about anyways).
So the lint would still fire on 2015 edition crates if you haven't included a dependency specified in Cargo.toml using `extern crate foo;` or similar.
The lint won't fire if your sole use in the crate is through a `extern crate foo;` statement, but that's not its job.
For detecting unused `extern crate foo` statements, there is the `unused_extern_crates` lint
which can be enabled by `#![warn(unused_extern_crates)]` or similar.
cc ```@jsgf``` ```@ehuss``` ```@petrochenkov``` ```@estebank```
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
Add function core::iter::zip
This makes it a little easier to `zip` iterators:
```rust
for (x, y) in zip(xs, ys) {}
// vs.
for (x, y) in xs.into_iter().zip(ys) {}
```
You can `zip(&mut xs, &ys)` for the conventional `iter_mut()` and
`iter()`, respectively. This can also support arbitrary nesting, where
it's easier to see the item layout than with arbitrary `zip` chains:
```rust
for ((x, y), z) in zip(zip(xs, ys), zs) {}
for (x, (y, z)) in zip(xs, zip(ys, zs)) {}
// vs.
for ((x, y), z) in xs.into_iter().zip(ys).zip(xz) {}
for (x, (y, z)) in xs.into_iter().zip((ys.into_iter().zip(xz)) {}
```
It may also format more nicely, especially when the first iterator is a
longer chain of methods -- for example:
```rust
iter::zip(
trait_ref.substs.types().skip(1),
impl_trait_ref.substs.types().skip(1),
)
// vs.
trait_ref
.substs
.types()
.skip(1)
.zip(impl_trait_ref.substs.types().skip(1))
```
This replaces the tuple-pair `IntoIterator` in #78204.
There is prior art for the utility of this in [`itertools::zip`].
[`itertools::zip`]: https://docs.rs/itertools/0.10.0/itertools/fn.zip.html
Rust contains various size checks conditional on target_arch = "x86_64",
but these checks were never intended to apply to
x86_64-unknown-linux-gnux32. Add target_pointer_width = "64" to the
conditions.
Fix ICE caused by suggestion with no code substitutions
Change suggestion logic to filter and checking _before_ creating
specific resolution suggestion.
Assert earlier that suggestions contain code substitions to make it
easier in the future to debug invalid uses. If we find this becomes too
noisy in the wild, we can always make the emitter resilient to these
cases and remove the assertions.
Fix#78651.
Make `treat_err_as_bug` Option<NonZeroUsize>
`rustc -Z treat-err-as-bug=N` already requires `N` to be nonzero when the argument is parsed, so changing the type from `Option<usize>` to `Option<NonZeroUsize>` is a low-hanging fruit in terms of layout optimization.
Change suggestion logic to filter and checking _before_ creating
specific resolution suggestion.
Assert earlier that suggestions contain code substitions to make it
easier in the future to debug invalid uses. If we find this becomes too
noisy in the wild, we can always make the emitter resilient to these
cases and remove the assertions.
Fix#78651.
...so we can skip serializing `tool_metadata` if it hasn't been set.
This makes the output a bit cleaner, and avoiding having to update a
bunch of unrelated tests.
This allows a build system to indicate a location in its own dependency
specification files (eg Cargo's `Cargo.toml`) which can be reported
along side any unused crate dependency.
This supports several types of location:
- 'json' - provide some json-structured data, which is included in the json diagnostics
in a `tool_metadata` field
- 'raw' - emit the provided string into the output. This also appears as a json string in
`tool_metadata`.
If no `--extern-location` is explicitly provided then a default json entry of the form
`"tool_metadata":{"name":<cratename>,"path":<cratepath>}` is emitted.
The tab replacement for diagnostics added in #79757 included a few assertions to
ensure all tab characters are handled appropriately. We've started getting
reports of these assertions firing (#81614). Since it's only a cosmetic issue,
this downgrades the assertions to debug only, so we at least continue compiling
even if the diagnostics might be a tad wonky.
Fixes#81614
Fixes#76267
When there is a single applicable method candidate, but its trait bounds
are not satisfied, we avoid saying that the method is "not found".
Insted, we update the error message to directly mention which bounds are
not satisfied, rather than mentioning them in a note.
Replace tabs earlier in diagnostics
This replaces tabs earlier in the diagnostics emitting process, which allows various margin calculations to ignore the existence of tabs. It does add a string copy for the source lines that are emitted.
Fixes https://github.com/rust-lang/rust/issues/78438
r? `@estebank`
This replaces tabs earlier in the diagnostics emitting process, which allows
various margin calculations to ignore the existence of tabs. It does add a
string copy for the source lines that are emitted.
Rustdoc test compiler output color
Fixes#72915
We just need to be sure it doesn't break rustdoc doctests' compilation checks. Maybe some other unforeseen consequences too?
r? `@ehuss`
cc `@rust-lang/rustdoc`
Properly handle lint spans after MIR inlining
The first commit shows what happens when we apply mir inlining and then cause lints on the inlined MIR.
The second commit fixes that.
r? `@wesleywiser`
The first use case of this detection of regression for trimmed paths
computation, that is in the case of rustc, which should be computed only
in case of errors or warnings.
Our current user of this method is deeply nested, being a side effect
from `Display` formatting on lots of rustc types. So taking only the
caller to the error message is not enough - we should collect the
traceback instead.
