Fix use placement for suggestions near main.
This fixes an edge case for the suggestion to add a `use`. When running with `--test`, the `main` function will be annotated with an `#[allow(dead_code)]` attribute. The `UsePlacementFinder` would end up using the dummy span of that synthetic attribute. If there are top-level inner attributes, this would place the `use` in the wrong position. The solution here is to ignore attributes with dummy spans.
In the process of working on this, I discovered that the `use_suggestion_placement` test was broken. `UsePlacementFinder` is unaware of active attributes. Attributes like `#[derive]` don't exist in the AST since they are removed. Fixing that is difficult, since the AST does not retain enough information. I considered trying to place the `use` towards the top of the module after any `extern crate` items, but I couldn't find a way to get a span for the start of a module block (the `mod` span starts at the `mod` keyword, and it seems tricky to find the spot just after the opening bracket and past inner attributes). For now, I just put some comments about the issue. This appears to have been a known issue in #44215 where the test for it was introduced, and the fix seemed to be deferred to later.
Don't use a generator for BoxedResolver
The generator is non-trivial and requires unsafe code anyway. Using regular unsafe code without a generator is much easier to follow.
Based on #85810 as it touches rustc_interface too.
Disallow shadowing const parameters
This pull request fixes#85348. Trying to shadow a `const` parameter as follows:
```rust
fn foo<const N: i32>() {
let N @ _ = 0;
}
```
currently causes an ICE. With my changes, I get:
```
error[E0530]: let bindings cannot shadow const parameters
--> test.rs:2:9
|
1 | fn foo<const N: i32>() {
| - the const parameter `N` is defined here
2 | let N @ _ = 0;
| ^ cannot be named the same as a const parameter
error: aborting due to previous error
```
This is the same error you get when trying to shadow a constant:
```rust
const N: i32 = 0;
let N @ _ = 0;
```
```
error[E0530]: let bindings cannot shadow constants
--> src/lib.rs:3:5
|
2 | const N: i32 = 0;
| ----------------- the constant `N` is defined here
3 | let N @ _ = 0;
| ^ cannot be named the same as a constant
error: aborting due to previous error
```
The reason for disallowing shadowing in both cases is described [here](https://github.com/rust-lang/rust/issues/33118#issuecomment-233962221) (the comment there only talks about constants, but the same reasoning applies to `const` parameters).
Fix diagnostic for cross crate private tuple struct constructors
Fixes#78708.
There was already some limited support for certain cross-crate scenarios but that didn't handle a tuple struct rexported from an inner module for example (e.g. the NonZero* types as seen in #85049).
```Rust
➜ cat bug.rs
fn main() {
let _x = std::num::NonZeroU32(12);
let n = std::num::NonZeroU32::new(1).unwrap();
match n {
std::num::NonZeroU32(i) => {},
}
}
```
**Before:**
<details>
```Rust
➜ rustc +nightly bug.rs
error[E0423]: expected function, tuple struct or tuple variant, found struct `std::num::NonZeroU32`
--> bug.rs:2:14
|
2 | let _x = std::num::NonZeroU32(12);
| ^^^^^^^^^^^^^^^^^^^^^^^^ help: use struct literal syntax instead: `std::num::NonZeroU32 { 0: val }`
|
::: /home/luqman/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/core/src/num/nonzero.rs:148:1
[snip]
error[E0532]: expected tuple struct or tuple variant, found struct `std::num::NonZeroU32`
--> bug.rs:5:9
|
5 | std::num::NonZeroU32(i) => {},
| ^^^^^^^^^^^^^^^^^^^^^^^ help: use struct pattern syntax instead: `std::num::NonZeroU32 { 0 }`
|
::: /home/luqman/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/core/src/num/nonzero.rs:148:1
[snip]
error: aborting due to 2 previous errors
Some errors have detailed explanations: E0423, E0532.
For more information about an error, try `rustc --explain E0423`.
```
</details>
**After:**
<details>
```Rust
➜ /rust/build/x86_64-unknown-linux-gnu/stage1/bin/rustc bug.rs
error[E0423]: cannot initialize a tuple struct which contains private fields
--> bug.rs:2:14
|
2 | let _x = std::num::NonZeroU32(12);
| ^^^^^^^^^^^^^^^^^^^^
|
note: constructor is not visible here due to private fields
--> /rust/library/core/src/num/nonzero.rs:148:1
[snip]
error[E0532]: cannot match against a tuple struct which contains private fields
--> bug.rs:5:9
|
5 | std::num::NonZeroU32(i) => {},
| ^^^^^^^^^^^^^^^^^^^^
|
note: constructor is not visible here due to private fields
--> bug.rs:5:30
|
5 | std::num::NonZeroU32(i) => {},
| ^ private field
error: aborting due to 2 previous errors
Some errors have detailed explanations: E0423, E0532.
For more information about an error, try `rustc --explain E0423`.
```
</details>
One question is if we should only collect the needed info for the cross-crate case after encountering an error instead of always doing it. Perf run perhaps to gauge the impact.
Suggest adding a type parameter for impls
Add a new suggestion upon encountering an unknown type in a `impl` that suggests adding a new type parameter. This diagnostic suggests to add a new type parameter even though it may be a const parameter, however after adding the parameter and running rustc again a follow up error steers the user to change the type parameter to a const parameter.
```rust
struct X<const C: ()>();
impl X<C> {}
```
suggests
```
error[E0412]: cannot find type `C` in this scope
--> bar.rs:2:8
|
1 | struct X<const C: ()>();
| ------------------------ similarly named struct `X` defined here
2 | impl X<C> {}
| ^
|
help: a struct with a similar name exists
|
2 | impl X<X> {}
| ^
help: you might be missing a type parameter
|
2 | impl<C> X<C> {}
| ^^^
```
After adding a type parameter the code now becomes
```rust
struct X<const C: ()>();
impl<C> X<C> {}
```
and the error now fully steers the user towards the correct code
```
error[E0747]: type provided when a constant was expected
--> bar.rs:2:11
|
2 | impl<C> X<C> {}
| ^
|
help: consider changing this type parameter to be a `const` generic
|
2 | impl<const C: ()> X<C> {}
| ^^^^^^^^^^^
```
r? `@estebank`
Somewhat related #84946
Handle more span edge cases in generics diagnostics
This should fix invalid suggestions that didn't account for empty bracket pairs (`<>`) or type bindings.
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
Implement RFC 1260 with feature_name `imported_main`.
This is the second extraction part of #84062 plus additional adjustments.
This (mostly) implements RFC 1260.
However there's still one test case failure in the extern crate case. Maybe `LocalDefId` doesn't work here? I'm not sure.
cc https://github.com/rust-lang/rust/issues/28937
r? `@petrochenkov`