Add Tests for native wasm exceptions
### Motivation
In PR #111322, I added support for native WASM exceptions. I was asked by ``@davidtwco`` to add some tests for it in a follow up PR, which seems like a very good idea.
This PR adds three tests for this feature:
* codegen: ensure the correct LLVM instructions are used
* assembly: ensure the correct WASM instructions are used
* run-make: ensure the exception handling works; the WASM code is run using a small nodejs script which demonstrates the exception handling
### Complications
There are a few changes beside adding the tests, which were necessary
* Tests for the wasm32-unknown-unknown target are (as far as I know) only run on `test-various`. Its docker image uses nodejs-15, which is very old. Experimental support for wasm-exceptions was added in nodejs16. In nodejs 18.12 (LTS), they are stable.
- --> increase nodejs to 18.12 in `test-various`
* codegen/assembly tests are not performed for the wasm32-unknown-unknown target yet
- --> add those to `test-various` as well
Due to the last point, some tests are run which have not run before (assembly+codegen tests for wasm32-unknown-unknown). I added `// ignore wasm32-bare` for those which failed
### Local testing
I run all tests locally using both `test-various` and `wasm32`. As far as I know, none of the other systems run any test for wasm32 targets.
Add `-Zremark-dir` unstable flag to write LLVM optimization remarks to YAML
This PR adds an option for `rustc` to emit LLVM optimization remarks to a set of YAML files, which can then be digested by existing tools, like https://github.com/OfekShilon/optview2. When `-Cremark-dir` is passed, and remarks are enabled (`-Cremark=all`), the remarks will be now written to the specified directory, **instead** of being printed to standard error output. The files are named based on the CGU from which they are being generated.
Currently, the remarks are written using the LLVM streaming machinery, directly in the diagnostics handler. It seemed easier than going back to Rust and then form there back to C++ to use the streamer from the diagnostics handler. But there are many ways to implement this, of course, so I'm open to suggestions :)
I included some comments with questions into the code. Also, I'm not sure how to test this.
r? `@tmiasko`
Convert `run-make/coverage-reports` tests to use a custom compiletest mode
I was frustrated by the fact that most of the coverage tests are glued together with makefiles and shell scripts, so I tried my hand at converting most of them over to a newly-implemented `run-coverage` mode/suite in compiletest.
This ~~*mostly*~~ resolves#85009, ~~though I've left a small number of the existing tests as-is because they would require more work to fix/support~~.
---
I had time to go back and add support for the more troublesome tests that I had initially skipped over, so this PR now manages to completely get rid of `run-make/coverage-reports`.
---
The patches are arranged as follows:
- Declare the new mode/suite in bootstrap
- Small changes to compiletest that will be used by the new mode
- Implement the new mode in compiletest
- Migrate most of the tests over
- Add more code to bootstrap and compiletest to support the remaining tests
- Migrate the remaining tests (with some temporary hacks to avoid re-blessing them)
- Remove the temporary hacks and re-bless the migrated tests
- Remove the unused remnants of `run-make/coverage-reports`
To make it easier to verify that the output snapshots have been migrated
faithfully, this change adds some temporary helper code that lets us avoid
having to completely re-bless the existing snapshots.
A later change in this PR will then re-bless the tests and remove the temporary
helper code.
Make `UnwindAction::Continue` explicit in MIR dump
Makes it easier to spot unwinding related issues in MIR by making `UnwindAction::Continue` explicit, just like all other `UnwindAction`s.
Prevent `.eh_frame` from being emitted for `-C panic=abort`
Since `CheckAlignment` pass is after the `AbortUnwindingCalls` pass, the `UnwindAction::Terminate` inserted in it has no chance to be converted to `UnwindAction::Unreachable` anymore, causing us to emit landing pads that are not necessary. Although these landing pads can themselves be eliminated by LLVM, `.eh_frame` sections are still generated. This causes trouble for Rust-for-Linux project recently.
This PR changes it to generate `UnwindAction::Terminate` when we opt for `-Cpanic=unwind`, and `UnwindAction::Unreachable` for `-Cpanic=abort`.
`@ojeda`
Write to stdout if `-` is given as output file
With this PR, if `-o -` or `--emit KIND=-` is provided, output will be written to stdout instead. Binary output (those of type `obj`, `llvm-bc`, `link` and `metadata`) being written this way will result in an error unless stdout is not a tty. Multiple output types going to stdout will trigger an error too, as they will all be mixded together.
This implements https://github.com/rust-lang/compiler-team/issues/431
The idea behind the changes is to introduce an `OutFileName` enum that represents the output - be it a real path or stdout - and to use this enum along the code paths that handle different output types.
- remove useless commands from test Makefile
- do not unnecessarily remove metadata temporary files because they'll be managed by MaybeTempDir
- remove unused FailedRemove error introduced by this PR
If `-o -` or `--emit KIND=-` is provided, output will be written
to stdout instead. Binary output (`obj`, `llvm-bc`, `link` and
`metadata`) being written this way will result in an error unless
stdout is not a tty. Multiple output types going to stdout will
trigger an error too, as they will all be mixded together.
Support #[global_allocator] without the allocator shim
This makes it possible to use liballoc/libstd in combination with `--emit obj` if you use `#[global_allocator]`. This is what rust-for-linux uses right now and systemd may use in the future. Currently they have to depend on the exact implementation of the allocator shim to create one themself as `--emit obj` doesn't create an allocator shim.
Note that currently the allocator shim also defines the oom error handler, which is normally required too. Once `#![feature(default_alloc_error_handler)]` becomes the only option, this can be avoided. In addition when using only fallible allocator methods and either `--cfg no_global_oom_handling` for liballoc (like rust-for-linux) or `--gc-sections` no references to the oom error handler will exist.
To avoid this feature being insta-stable, you will have to define `__rust_no_alloc_shim_is_unstable` to avoid linker errors.
(Labeling this with both T-compiler and T-lang as it originally involved both an implementation detail and had an insta-stable user facing change. As noted above, the `__rust_no_alloc_shim_is_unstable` symbol requirement should prevent unintended dependence on this unstable feature.)
Fix local libs not included when printing native static libs
This PR fixes https://github.com/rust-lang/rust/issues/111643 by adding the local used libs to the printed `--print=native-static-libs` output.
It seems that `--print=native-static-libs` doesn't have any test, so I added one. It's very simple and doesn't even tries to compile the result to a binary as I don't know how to handle external library linking in CI. (Note that https://github.com/rust-lang/rust/blob/master/tests/run-make/staticlib-dylib-linkage/Makefile does compile to a binary)
r? `@bjorn3`
Fix dependency tracking for debugger visualizers
This PR fixes dependency tracking for debugger visualizer files by changing the `debugger_visualizers` query to an `eval_always` query that scans the AST while it is still available. This way the set of visualizer files is already available when dep-info is emitted. Since the query is turned into an `eval_always` query, dependency tracking will now reliably detect changes to the visualizer script files themselves.
TODO:
- [x] perf.rlo
- [x] Needs a bit more documentation in some places
- [x] Needs regression test for the incr. comp. case
Fixes https://github.com/rust-lang/rust/issues/111226
Fixes https://github.com/rust-lang/rust/issues/111227
Fixes https://github.com/rust-lang/rust/issues/111295
r? `@wesleywiser`
cc `@gibbyfree`
Only depend on CFG_VERSION in rustc_interface
This avoids having to rebuild the whole compiler on each commit when `omit-git-hash = false`.
cc https://github.com/rust-lang/rust/issues/76720 - this won't fix it, and I'm not suggesting we turn this on by default, but it will make it less painful for people who do have `omit-git-hash` on as a workaround.
Fix data race in llvm source code coverage
Fixes#91092 .
Before this patch, increment of counters for code coverage looks like this:
```
movq .L__profc__RNvCsd6wgJFC5r19_3lib6bugaga+8(%rip), %rax
addq $1, %rax
movq %rax, .L__profc__RNvCsd6wgJFC5r19_3lib6bugaga+8(%rip)
```
after this patch:
```
lock incq .L__profc__RNvCs3JgIB2SjHh2_3lib6bugaga+8(%rip)
```
Fix instrument-coverage tests by using Python to sort instantiation groups
#110942 was intended to fix a set of `-Cinstrument-coverage` tests, but it ended up silently *breaking* those tests on Linux, for annoying reasons detailed at #111171.
Dealing with `diff --ignore-matching-lines` across multiple platforms has been such a hassle that I've instead written a simple Python script that can detect instantiation groups in the output of `llvm-cov show`, and sort them in a predictable order so that they can be used as snapshots for an ordinary invocation of `diff`.
This approach should be much less error-prone, because it can't accidentally ignore the wrong lines, and any unforeseen problems will tend to result in a Python exception or a failing diff.
Support linking to rust dylib with --crate-type staticlib
This allows for example dynamically linking libstd, while statically linking the user crate into an executable or C dynamic library. For this two unstable flags (`-Z staticlib-allow-rdylib-deps` and `-Z staticlib-prefer-dynamic`) are introduced. Without the former you get an error. The latter is the equivalent to `-C prefer-dynamic` for the staticlib crate type to indicate that dynamically linking is preferred when both options are available, like for libstd. Care must be taken to ensure that no crate ends up being merged into two distinct staticlibs that are linked together. Doing so will cause a linker error at best and undefined behavior at worst. In addition two distinct staticlibs compiled by different rustc may not be combined under any circumstances due to some rustc private symbols not being mangled.
To successfully link a staticlib, `--print native-static-libs` can be used while compiling to ask rustc for the linker flags necessary when linking the staticlib. This is an existing flag which previously only listed native libraries. It has been extended to list rust dylibs too. Trying to locate libstd yourself to link against it is not supported and may break if for example the libstd of multiple rustc versions are put in the same directory.
For an example on how to use this see the `src/test/run-make-fulldeps/staticlib-dylib-linkage/` test.
Add GNU Property Note
Fix#103001
Generates the missing property note:
```
Displaying notes found in: .note.gnu.property
Owner Data size Description
GNU 0x00000010 NT_GNU_PROPERTY_TYPE_0 Properties: x86 feature: IBT
```
debuginfo: split method declaration and definition
When we're adding a method to a type DIE, we only want a DW_AT_declaration
there, because LLVM LTO can't unify type definitions when a child DIE is a
full subprogram definition. Now the subprogram definition gets added at the
CU level with a specification link back to the abstract declaration.
Both GCC and Clang write debuginfo this way for C++ class methods.
Fixes#109730.
Fixes#109934.
