compiletest: use target cfg instead of hard-coded tables
This changes compiletest to use `rustc --print=cfg` to dynamically determine the properties of a target when matching `ignore` and `only` rules instead of using hard-coded tables or target-triple parsing (which don't always follow the `<arch><sub>-<vendor>-<sys>-<abi>` pattern). The benefit here is that it will more accurately match the target properties, and not require maintaining these extra tables.
This also adds matching the `target_family` in ignore rules. The primary benefit here is so that `ignore-wasm` works as expected (matching all wasm-like targets). There were already several tests that had `ignore-wasm` in them (which previously had no effect), so it is evident that some people expected that to work. This also adds `ignore-unix/only-unix`.
There is some risk that this changes the behavior from before since the tables aren't quite the same as the target properties. However, I did fairly extensive comparisons to see what would be different. https://gist.github.com/ehuss/5bf7ab347605160cefb6f84ba5ea5f6b contains a full list of differences for all targets for all tests. I do not think any of the affected target/test combinations are things that are actually tested in CI. I tested several of the more unusual test images (test-various, dist-various-1, wasm32), and they seem fine.
A summary of most of the reasons behind the differences:
- wasm64-unknown-unknown wasm32-wasi now match "wasm"
- Targets now match "gnu" because they have target_env=gnu
- aarch64-wrs-vxworks
- armv7-wrs-vxworks-eabihf
- i686-wrs-vxworks
- powerpc-wrs-vxworks
- powerpc64-wrs-vxworks
- x86_64-wrs-vxworks
- wasm64-unknown-unknown now matches wasm64
- x86_64-unknown-none-linuxkernel no longer matches "linux", but will match "gnu" and "none"
- Various arm targets now match "aarch64" or "arm":
- arm64_32-apple-watchos
- armebv7r-none-eabi
- armv6-unknown-freebsd
- armv6-unknown-netbsd-eabihf
- armv6k-nintendo-3ds
- armv7-wrs-vxworks-eabihf
- armv7a-kmc-solid_asp3-eabi
- armv7a-kmc-solid_asp3-eabihf
- armv7a-none-eabi
- armv7a-none-eabihf
- armv7k-apple-watchos
- armv7r-none-eabi
- armv7r-none-eabihf
- Now matches "thumb" and "arm"
- thumbv4t-none-eabi
- thumbv6m-none-eabi
- thumbv7a-pc-windows-msvc
- thumbv7a-uwp-windows-msvc
- thumbv7em-none-eabi
- thumbv7em-none-eabihf
- thumbv7m-none-eabi
- thumbv7neon-linux-androideabi
- thumbv7neon-unknown-linux-gnueabihf
- thumbv7neon-unknown-linux-musleabihf
- thumbv8m.base-none-eabi
- thumbv8m.main-none-eabi
- asmjs-unknown-emscripten now matches "wasm32" because that it is its defined arch
- avr-unknown-gnu-atmega328 now matches "none" (because target_os="none")
- now matches 64bit:
- bpfeb-unknown-none
- bpfel-unknown-none
- sparcv9-sun-solaris
- now matches endian-big:
- m68k-unknown-linux-gnu
- now matches 16bit:
- msp430-none-elf
- now matches 32bit:
- arm64_32-apple-watchos
- now matches riscv32 (and needs-asm-support):
- riscv32gc-unknown-linux-gnu
- riscv32gc-unknown-linux-musl
- riscv32i-unknown-none-elf
- riscv32im-unknown-none-elf
- riscv32imac-unknown-none-elf
- riscv32imac-unknown-xous-elf
- riscv32imc-esp-espidf
- riscv32imc-unknown-none-elf
- riscv64imac-unknown-none-elf
Implement `#[rustc_default_body_unstable]`
This PR implements a new stability attribute — `#[rustc_default_body_unstable]`.
`#[rustc_default_body_unstable]` controls the stability of default bodies in traits.
For example:
```rust
pub trait Trait {
#[rustc_default_body_unstable(feature = "feat", isssue = "none")]
fn item() {}
}
```
In order to implement `Trait` user needs to either
- implement `item` (even though it has a default implementation)
- enable `#![feature(feat)]`
This is useful in conjunction with [`#[rustc_must_implement_one_of]`](https://github.com/rust-lang/rust/pull/92164), we may want to relax requirements for a trait, for example allowing implementing either of `PartialEq::{eq, ne}`, but do so in a safe way — making implementation of only `PartialEq::ne` unstable.
r? `@Aaron1011`
cc `@nrc` (iirc you were interested in this wrt `read_buf`), `@danielhenrymantilla` (you were interested in the related `#[rustc_must_implement_one_of]`)
P.S. This is my first time working with stability attributes, so I'm not sure if I did everything right 😅
Rollup of 5 pull requests
Successful merges:
- #100071 (deps: dedupe `annotate-snippets` crate versions)
- #100127 (Remove Windows function preloading)
- #100130 (Avoid pointing out `return` span if it has nothing to do with type error)
- #100169 (Optimize `pointer::as_aligned_to`)
- #100175 (ascii -> ASCII in code comment)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Bump cc version in bootstrap
Among other changes, the newer cc release pulls in this fix:
b2792e33ff
This fixes errors when building compiler_builtins for UEFI targets.
Rollup of 6 pull requests
Successful merges:
- #99933 (parallelize HTML checking tool)
- #99958 (Improve position named arguments lint underline and formatting names)
- #100008 (Update all pre-cloned submodules on startup)
- #100049 (⬆️ rust-analyzer)
- #100070 (Clarify Cargo.toml comments)
- #100074 (rustc-docs: Be less specific about the representation of `+bundle`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
parallelize HTML checking tool
there's a lot of IO, so timings on my laptop are far from stable, but it seems to be considerably faster.
this step often appears to take 5+ minutes in CI, so hopefully this offers a speedup
This is done by having the crossbeam dependency inserted into the
proc_macro server code from the server side, to avoid adding a
dependency to proc_macro.
In addition, this introduces a -Z command-line option which will switch
rustc to run proc-macros using this cross-thread executor. With the
changes to the bridge in #98186, #98187, #98188 and #98189, the
performance of the executor should be much closer to same-thread
execution.
In local testing, the crossbeam executor was substantially more
performant than either of the two existing CrossThread strategies, so
they have been removed to keep things simple.
This initial implementation handles transmutations between types with specified layouts, except when references are involved.
Co-authored-by: Igor null <m1el.2027@gmail.com>
Upgrade indexmap and thorin-dwp to use hashbrown 0.12
This removes the last dependencies on hashbrown 0.11.
This also upgrades to hashbrown 0.12.3 to fix a double-free (#99372).
Add fine-grained LLVM CFI support to the Rust compiler
This PR improves the LLVM Control Flow Integrity (CFI) support in the Rust compiler by providing forward-edge control flow protection for Rust-compiled code only by aggregating function pointers in groups identified by their return and parameter types.
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by identifying C char and integer type uses at the time types are encoded (see Type metadata in the design document in the tracking issue https://github.com/rust-lang/rust/issues/89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e., -Clto).
Thank you again, `@eddyb,` `@nagisa,` `@pcc,` and `@tmiasko` for all the help!
This commit improves the LLVM Control Flow Integrity (CFI) support in
the Rust compiler by providing forward-edge control flow protection for
Rust-compiled code only by aggregating function pointers in groups
identified by their return and parameter types.
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by identifying C char and integer type uses at the
time types are encoded (see Type metadata in the design document in the
tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e.,
-Clto).
Use constant eval to do strict mem::uninit/zeroed validity checks
I'm not sure about the code organisation here, I just dumped the check in rustc_const_eval at the root. Not hard to move it elsewhere, in any case.
Also, this means cranelift codegen intrinsics lose the strict checks, since they don't seem to depend on rustc_const_eval, and I didn't see a point in keeping around two copies.
I also left comments in the is_zero_valid methods about "uhhh help how do i do this", those apply to both methods equally.
Also rustc_codegen_ssa now depends on rustc_const_eval... is this okay?
Pinging `@RalfJung` since you were the one who mentioned this to me, so I'm assuming you're interested.
Haven't had a chance to run full tests on this since it's really warm, and it's 1AM, I'll check out any failures/comments in the morning :)
Stop keeping metadata in memory before writing it to disk
Fixes#96358
I created this PR according with the instruction given in the issue except for the following points:
- While the issue says "Write metadata into the temporary file in `encode_and_write_metadata` even if `!need_metadata_file`", I could not do that. That is because though I tried to do that and run `x.py test`, I got a lot of test failures as follows.
<details>
<summary>List of failed tests</summary>
<pre>
<code>
failures:
[ui] src/test/ui/json-multiple.rs
[ui] src/test/ui/json-options.rs
[ui] src/test/ui/rmeta/rmeta-rpass.rs
[ui] src/test/ui/save-analysis/emit-notifications.rs
[ui] src/test/ui/svh/changing-crates.rs
[ui] src/test/ui/svh/svh-change-lit.rs
[ui] src/test/ui/svh/svh-change-significant-cfg.rs
[ui] src/test/ui/svh/svh-change-trait-bound.rs
[ui] src/test/ui/svh/svh-change-type-arg.rs
[ui] src/test/ui/svh/svh-change-type-ret.rs
[ui] src/test/ui/svh/svh-change-type-static.rs
[ui] src/test/ui/svh/svh-use-trait.rs
test result: FAILED. 12915 passed; 12 failed; 100 ignored; 0 measured; 0 filtered out; finished in 71.41s
Some tests failed in compiletest suite=ui mode=ui host=x86_64-unknown-linux-gnu target=x86_64-unknown-linux-gnu
Build completed unsuccessfully in 0:01:58
</code>
</pre>
</details>
- I could not resolve the extra tasks about `create_rmeta_file` and `create_compressed_metadata_file` for my lack of ability.
macros: `LintDiagnostic` derive
- Move `LintDiagnosticBuilder` into `rustc_errors` so that a diagnostic derive can refer to it.
- Introduce a `DecorateLint` trait, which is equivalent to `SessionDiagnostic` or `AddToDiagnostic` but for lints. Necessary without making more changes to the lint infrastructure as `DecorateLint` takes a `LintDiagnosticBuilder` and re-uses all of the existing logic for determining what type of diagnostic a lint should be emitted as (e.g. error/warning).
- Various refactorings of the diagnostic derive machinery (extracting `build_field_mapping` helper and moving `sess` field out of the `DiagnosticDeriveBuilder`).
- Introduce a `LintDiagnostic` derive macro that works almost exactly like the `SessionDiagnostic` derive macro except that it derives a `DecorateLint` implementation instead. A new derive is necessary for this because `SessionDiagnostic` is intended for when the generated code creates the diagnostic. `AddToDiagnostic` could have been used but it would have required more changes to the lint machinery.
~~At time of opening this pull request, ignore all of the commits from #98624, it's just the last few commits that are new.~~
r? `@oli-obk`
`SessionDiagnostic` isn't suitable for use on lints as whether or not it
creates an error or a warning is decided at compile-time by the macro,
whereas lints decide this at runtime based on the location of the lint
being reported (as it will depend on the user's `allow`/`deny`
attributes, etc). Re-using most of the machinery for
`SessionDiagnostic`, this macro introduces a `LintDiagnostic` derive
which implements a `DecorateLint` trait, taking a
`LintDiagnosticBuilder` and adding to the lint according to the
diagnostic struct.
Bump RLS to latest master on rust-lang/rls
Of primary interest, this merges
rust-lang/rls@ece09b88c0 into rust-lang/rust,
which brings in the changes that fix RLS tests broken by #97853. #97853 already
introduced that commit's changes (under
rust-lang/rls@27f4044df0) but without putting those changes on
rust-lang/rls as a branch, so we ended up with an orphan commit that caused
trouble when updating submodules in rust-lang/rust.
This commit, once merged into rust-lang/rust, should continue to let RLS tests
to pass on rust-lang/rust's side and move us back into a healthy state where tip
of the submodule points to a valid master commit in the rust-lang/rls
repository.
cc https://github.com/rust-lang/rust/issues/98451, but not marking as fixed as I believe we need to add verification to prevent future oversights.
Fully remove submodule handling from bootstrap.py
These submodules were previously updated in python because Cargo gives a hard error if toml files
are missing from the workspace:
```
error: failed to load manifest for workspace member `/home/jnelson/rust-lang/rust/src/tools/rls`
Caused by:
failed to read `/home/jnelson/rust-lang/rust/src/tools/rls/Cargo.toml`
Caused by:
No such file or directory (os error 2)
failed to run: /home/jnelson/rust-lang/rust/build/x86_64-unknown-linux-gnu/stage0/bin/cargo build --manifest-path /home/jnelson/rust-lang/rust/src/bootstrap/Cargo.toml
```
However, bootstrap doesn't actually need to be part of the workspace.
Remove it so we can move submodule handling fully to Rust, avoiding duplicate code between Rust and Python.
Note that this does break `cargo run`; it has to be `cd src/bootstrap && cargo run` now.
Given that we're planning to make the main entrypoint a shell script (or rust binary),
I think this is a good tradeoff for reduced complexity in bootstrap.py.
To get this working, I also had to remove support for vendoring when using the git sources, because `cargo vendor` requires all submodules to be checked out. I think this is ok; people who care about this are likely already using the pre-vendored `rustc-src` tarball.
Fixes https://github.com/rust-lang/rust/issues/90764. Helps with #94829
Of primary interest, this merges
rust-lang/rls@ece09b88c0 into rust-lang/rust,
which brings in the changes that fix RLS tests broken by #97853. #97853 already
introduced that commit's changes (under
27f4044df03d15c7c38a483c3e4635cf4f51807d) but without putting those changes on
rust-lang/rls as a branch, so we ended up with an orphan commit that caused
trouble when updating submodules in rust-lang/rust.
This commit, once merged into rust-lang/rust, should continue to let RLS tests
to pass on rust-lang/rust's side and move us back into a healthy state where tip
of the submodule points to a valid master commit in the rust-lang/rls
repository.
Migrate two diagnostics from the `rustc_builtin_macros` crate
Migrate two diagnostics to use the struct derive and be translatable.
r? ```@davidtwco```
These submodules were previously updated in python because Cargo gives a hard error if toml files
are missing from the workspace:
```
error: failed to load manifest for workspace member `/home/jnelson/rust-lang/rust/src/tools/rls`
Caused by:
failed to read `/home/jnelson/rust-lang/rust/src/tools/rls/Cargo.toml`
Caused by:
No such file or directory (os error 2)
failed to run: /home/jnelson/rust-lang/rust/build/x86_64-unknown-linux-gnu/stage0/bin/cargo build --manifest-path /home/jnelson/rust-lang/rust/src/bootstrap/Cargo.toml
```
However, bootstrap doesn't actually need to be part of the workspace.
Remove it so we can move submodule handling fully to Rust, avoiding duplicate code between Rust and Python.
Note that this does break `cargo run`; it has to be `cd src/bootstrap && cargo run` now.
Given that we're planning to make the main entrypoint a shell script (or rust binary),
I think this is a good tradeoff for reduced complexity in bootstrap.py.
Make "Assemble stage1 compiler" orders of magnitude faster (take 2)
This used to take upwards of 5 seconds for me locally. I found that the culprit was copying the downloaded LLVM shared object:
```
[22:28:03] Install "/home/jnelson/rust-lang/rust/build/x86_64-unknown-linux-gnu/ci-llvm/lib/libLLVM-14-rust-1.62.0-nightly.so" to "/home/jnelson/rust-lang/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libLLVM-14-rust-1.62.0-nightly.so"
[22:28:09] c Sysroot { compiler: Compiler { stage: 1, host: x86_64-unknown-linux-gnu(x86_64-unknown-linux-gnu) } }
```
It turned out that `install()` used full copies unconditionally. Change it to try using a hard-link before falling back to copying.
- Panic if we generate a symbolic link in a tarball
- Change install to use copy internally, like in my previous PR
- Change copy to dereference symbolic links, which avoids the previous regression in #96803.
I also took the liberty of fixing `x dist llvm-tools` to work even if you don't call `x build` previously.
add comments in `store_dead_field_or_variant`
support multiple log level
add a item ident label
fix ui tests
fix a ui test
fix a rustdoc ui test
use let chain
refactor: remove `store_dead_field_or_variant`
fix a tiny bug
4 commits in 4d92f07f34ba7fb7d7f207564942508f46c225d3..8d42b0e8794ce3787c9f7d6d88b02ae80ebe8d19
2022-06-10 01:11:04 +0000 to 2022-06-17 16:46:26 +0000
- Use specific terminology for sparse HTTP-based registry (rust-lang/cargo#10764)
- chore: Upgrade to clap 3.2 (rust-lang/cargo#10753)
- Improve testing framework for http registries (rust-lang/cargo#10738)
- doc: Improve example of using the links field (rust-lang/cargo#10728)
This adds the typeid and `vcall_visibility` metadata to vtables when the
-Cvirtual-function-elimination flag is set.
The typeid is generated in the same way as for the
`llvm.type.checked.load` intrinsic from the trait_ref.
The offset that is added to the typeid is always 0. This is because LLVM
assumes that vtables are constructed according to the definition in the
Itanium ABI. This includes an "address point" of the vtable. In C++ this
is the offset in the vtable where information for RTTI is placed. Since
there is no RTTI information in Rust's vtables, this "address point" is
always 0. This "address point" in combination with the offset passed to
the `llvm.type.checked.load` intrinsic determines the final function
that should be loaded from the vtable in the
`WholeProgramDevirtualization` pass in LLVM. That's why the
`llvm.type.checked.load` intrinsics are generated with the typeid of the
trait, rather than with that of the function that is called. This
matches what `clang` does for C++.
The vcall_visibility metadata depends on three factors:
1. LTO level: Currently this is always fat LTO, because LLVM only
supports this optimization with fat LTO.
2. Visibility of the trait: If the trait is publicly visible, VFE
can only act on its vtables after linking.
3. Number of CGUs: if there is more than one CGU, also vtables with
restricted visibility could be seen outside of the CGU, so VFE can
only act on them after linking.
To reflect this, there are three visibility levels: Public, LinkageUnit,
and TranslationUnit.
Update minifier version to 0.2.1
This change and these changes come from an idea of `@camelid:` instead of creating a string, we just `write` the type into the file directly.
I don't think it'll have a big impact on perf but it's still a potential small improvement.
r? `@notriddle`
Update cargo
7 commits in 38472bc19f2f76e245eba54a6e97ee6821b3c1db..85e457e158db216a2938d51bc3b617a5a7fe6015
2022-05-31 02:03:24 +0000 to 2022-06-07 21:57:52 +0000
- Make -Z http-registry use index.crates.io when accessing crates-io (rust-lang/cargo#10725)
- Respect submodule update=none strategy in .gitmodules (rust-lang/cargo#10717)
- Expose rust-version through env var (rust-lang/cargo#10713)
- add validation for string "true"/"false" in lto profile (rust-lang/cargo#10676)
- Enhance documentation of testing (rust-lang/cargo#10726)
- Clear disk space on CI. (rust-lang/cargo#10724)
- Enforce to use tar v0.4.38 (rust-lang/cargo#10720)
Add build metrics to rustbuild
This PR adds a new module of rustbuild, `ci_profiler`, whose job is to gather as much information as possible about the CI build as possible and store it in a JSON file uploaded to `ci-artifacts`. Right now for each step it collects:
* Type name and debug representation of the `Step` object.
* Duration of the step (excluding child steps).
* Systemwide CPU stats for the duration of the step (both single core and all cores).
* Which child steps were executed.
This is capable of replacing both the scripts to collect CPU stats and the `[TIMING]` lines in build logs (not yet removed, until we port our tooling to use the CI profiler). The format is also extensible to be able in the future to collect more information.
r? `@Mark-Simulacrum`
library/std: Bump compiler_builtins
Some neat changes include faster float conversions & fixes for AVR 🙂
(note that's it's my first time upgrading `compiler_builtins`, so I'm not 100% sure if bumping `library/std/Cargo.toml` is enough; certainly seems to be so, though.)
Update to rebased rustc-rayon 0.4
In rayon-rs/rayon#938, miri uncovered a race in `rustc-rayon-core` that had already been fixed in the regular `rayon-core`. I have now rebased that fork onto the latest rayon branch, and published as 0.4. I also updated `indexmap` to bump the dependency.
`Cargo.lock` changes:
Updating indexmap v1.8.0 -> v1.8.2
Updating rayon v1.5.1 -> v1.5.3
Updating rayon-core v1.9.1 -> v1.9.3
Updating rustc-rayon v0.3.2 -> v0.4.0
Updating rustc-rayon-core v0.3.2 -> v0.4.1
macros: introduce `fluent_messages` macro
Adds a new `fluent_messages` macro which performs compile-time validation of the compiler's Fluent resources (i.e. that the resources parse and don't multiply define the same messages) and generates constants that make using those messages in diagnostics more ergonomic.
For example, given the following invocation of the macro..
```rust
fluent_messages! {
typeck => "./typeck.ftl",
}
```
..where `typeck.ftl` has the following contents..
```fluent
typeck-field-multiply-specified-in-initializer =
field `{$ident}` specified more than once
.label = used more than once
.label-previous-use = first use of `{$ident}`
```
...then the macro parse the Fluent resource, emitting a diagnostic if it fails to do so...
```text
error: could not parse Fluent resource
--> $DIR/test.rs:35:28
|
LL | missing_message => "./missing-message.ftl",
| ^^^^^^^^^^^^^^^^^^^^^^^
|
= help: see additional errors emitted
error: expected a message field for "missing-message"
--> ./missing-message.ftl:1:1
|
1 | missing-message =
| ^^^^^^^^^^^^^^^^^^
|
```
...or generating the following code if it succeeds:
```rust
pub static DEFAULT_LOCALE_RESOURCES: &'static [&'static str] = &[
include_str!("./typeck.ftl"),
];
mod fluent_generated {
mod typeck {
pub const field_multiply_specified_in_initializer: DiagnosticMessage =
DiagnosticMessage::fluent("typeck-field-multiply-specified-in-initializer");
pub const field_multiply_specified_in_initializer_label_previous_use: DiagnosticMessage =
DiagnosticMessage::fluent_attr(
"typeck-field-multiply-specified-in-initializer",
"previous-use-label"
);
}
}
```
When emitting a diagnostic, the generated constants can be used as follows:
```rust
let mut err = sess.struct_span_err(
span,
fluent::typeck::field_multiply_specified_in_initializer
);
err.span_label(
span,
fluent::typeck::field_multiply_specified_in_initializer_label
);
err.span_label(
previous_use_span,
fluent::typeck::field_multiply_specified_in_initializer_label_previous_use
);
err.emit();
```
I'd like to reduce the verbosity of referring to labels/notes/helps with this scheme (though it wasn't much better before), but I'll leave that for a follow-up.
r? `@oli-obk`
cc `@pvdrz` `@compiler-errors`
Update jemalloc to v5.3
Now that `jemalloc` version 5.3 has been released, this PR updates `tikv-jemalloc-sys` to the corresponding release.
The crates.io publishing issue seems to have been resolved for the `jemalloc-sys` package, and version 5.3.0 is now also available under the historical name (and should become the preferred crate to be used). Therefore, this PR also switches back to using `jemalloc-sys` instead of `tikv-jemalloc-sys`.
Adds a new `fluent_messages` macro which performs compile-time
validation of the compiler's Fluent resources (i.e. that the resources
parse and don't multiply define the same messages) and generates
constants that make using those messages in diagnostics more ergonomic.
For example, given the following invocation of the macro..
```ignore (rust)
fluent_messages! {
typeck => "./typeck.ftl",
}
```
..where `typeck.ftl` has the following contents..
```fluent
typeck-field-multiply-specified-in-initializer =
field `{$ident}` specified more than once
.label = used more than once
.label-previous-use = first use of `{$ident}`
```
...then the macro parse the Fluent resource, emitting a diagnostic if it
fails to do so, and will generate the following code:
```ignore (rust)
pub static DEFAULT_LOCALE_RESOURCES: &'static [&'static str] = &[
include_str!("./typeck.ftl"),
];
mod fluent_generated {
mod typeck {
pub const field_multiply_specified_in_initializer: DiagnosticMessage =
DiagnosticMessage::fluent("typeck-field-multiply-specified-in-initializer");
pub const field_multiply_specified_in_initializer_label_previous_use: DiagnosticMessage =
DiagnosticMessage::fluent_attr(
"typeck-field-multiply-specified-in-initializer",
"previous-use-label"
);
}
}
```
When emitting a diagnostic, the generated constants can be used as
follows:
```ignore (rust)
let mut err = sess.struct_span_err(
span,
fluent::typeck::field_multiply_specified_in_initializer
);
err.span_default_label(span);
err.span_label(
previous_use_span,
fluent::typeck::field_multiply_specified_in_initializer_label_previous_use
);
err.emit();
```
Signed-off-by: David Wood <david.wood@huawei.com>
In #95604 the compiler started generating a temporary symbols.o which is added
to the linker invocation. This object file has an `e_flags` which may be invalid
for 32-bit MIPS targets. Even though symbols.o doesn't contain code, linking
with [lld fails](https://github.com/llvm/llvm-project/blob/main/lld/ELF/Arch/MipsArchTree.cpp#L79) with
```
rust-lld: error: foo-cgu.0.rcgu.o: ABI 'o32' is incompatible with target ABI 'n64'
```
because it omits the ABI bits (EF_MIPS_ABI_O32) so lld assumes it's using the
N64 ABI. This breaks linking on nightly for the out-of-tree [psx
target](https://github.com/ayrtonm/psx-sdk-rs/issues/9), the builtin
mipsel-sony-psp target (cc @overdrivenpotato) and any other 32-bit MIPS
target using lld.
This PR sets the ABI in `e_flags` to O32 since that's the only ABI for 32-bit
MIPS that LLVM supports. It also sets other `e_flags` bits based on the target.
I had to bump the object crate version since some of these constants were [added
recently](https://github.com/gimli-rs/object/pull/433). I'm not sure if this
PR needs a test, but I can confirm that it fixes the linking issue on both
targets I mentioned.
Use futex-based locks and thread parker on {Free, Open, DragonFly}BSD.
This switches *BSD to our futex-based locks and thread parker.
Tracking issue: https://github.com/rust-lang/rust/issues/93740
This is a draft, because this still needs a new version of the `libc` crate to be published that includes https://github.com/rust-lang/libc/pull/2770.
r? `@Amanieu`
Add a new Rust attribute to support embedding debugger visualizers
Implemented [this RFC](https://github.com/rust-lang/rfcs/pull/3191) to add support for embedding debugger visualizers into a PDB.
Added a new attribute `#[debugger_visualizer]` and updated the `CrateMetadata` to store debugger visualizers for crate dependencies.
RFC: https://github.com/rust-lang/rfcs/pull/3191
Avoid using `rand::thread_rng` in the stdlib benchmarks.
This is kind of an anti-pattern because it introduces extra nondeterminism for no real reason. In thread_rng's case this comes both from the random seed and also from the reseeding operations it does, which occasionally does syscalls (which adds additional nondeterminism). The impact of this would be pretty small in most cases, but it's a good practice to avoid (particularly because avoiding it was not hard).
Anyway, several of our benchmarks already did the right thing here anyway, so the change was pretty easy and mostly just applying it more universally. That said, the stdlib benchmarks aren't particularly stable (nor is our benchmark framework particularly great), so arguably this doesn't matter that much in practice.
~~Anyway, this also bumps the `rand` dev-dependency to 0.8, since it had fallen somewhat out of date.~~ Nevermind, too much of a headache.
Enable tracing for all queries
This allows you to log everything within a specific query, e.g.
```
env RUSTC_LOG=[mir_borrowck]
```
dumping all borrowck queries may be a bit verbose, so you can also restrict it to just an item of your choice:
```
env RUSTC_LOG=[mir_borrowck{key=\.\*name_of_item\.\*}]
```
the regex `.*` in the key name are because the key is a debug printed DefId, so you'd get all kinds of things like hashes in there. The tracing logs will show you the key, so you can restrict it further if you want.
Cleanup `DebuggerVisualizerFile` type and other minor cleanup of queries.
Merge the queries for debugger visualizers into a single query.
Revert move of `resolve_path` to `rustc_builtin_macros`. Update dependencies in Cargo.toml for `rustc_passes`.
Respond to PR comments. Load visualizer files into opaque bytes `Vec<u8>`. Debugger visualizers for dynamically linked crates should not be embedded in the current crate.
Update the unstable book with the new feature. Add the tracking issue for the debugger_visualizer feature.
Respond to PR comments and minor cleanups.
This tool will generate a JSON file with statistics about each
individual step to disk. It will be used in rust-lang/rust's CI to
replace the mix of scripts and log scraping we currently have to gather
this data.
This attempts to keep the logic as close to the original python as possible.
`probably_large` has been removed, since it was always `True`, and UTF-8 paths are no longer supported when patching files for NixOS.
I can readd UTF-8 support if desired.
Note that this required making `llvm_link_shared` computed on-demand,
since we don't know whether it will be static or dynamic until we download LLVM from CI.
Update cargo
7 commits in dba5baf4345858c591517b24801902a062c399f8..edffc4ada3d77799e5a04eeafd9b2f843d29fc23
2022-04-13 21:58:27 +0000 to 2022-04-19 17:38:29 +0000
- Document cargo-add (rust-lang/cargo#10578)
- feat: Support '-F' as an alias for '--features' (rust-lang/cargo#10576)
- Completion support for `cargo-add` (rust-lang/cargo#10577)
- Add a link to the document in the timings report (rust-lang/cargo#10492)
- feat: Import cargo-add into cargo (rust-lang/cargo#10472)
- Part 8 of RFC2906 - Keep `InheritableFields` in a `LazyCell` inside `… (rust-lang/cargo#10568)
- Part 7 of RFC2906 - Add support for inheriting `exclude` and `include` (rust-lang/cargo#10565)
Remove `--extern-location` and all associated code
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
Add support for LibreSSL 3.4.x
This updates the `openssl` and `openssl-sys` crates to support building
the toolchain with system libraries up to LibreSSL 3.4.x.
LibreSSL 3.4.0 has been supported since `openssl-sys` version 0.9.67,
LibreSSL 3.4.x since `openssl-sys` 0.9.72.
This updates the `openssl` and `openssl-sys` crates to support building
the toolchain with system libraries up to LibreSSL 3.4.x.
LibreSSL 3.4.0 has been supported since `openssl-sys` version 0.9.67,
LibreSSL 3.4.x since `openssl-sys` 0.9.72.
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
With the updated libc, UNIX stack overflow handling in libstd can now
use the common `si_addr` accessor function, rather than attempting to
use a field from that name in `siginfo_t`. This simplifies the
collection of the fault address, particularly on platforms where that
data resides within a union in `siginfo_t`.
Conditional on the parallel compiler being enabled, use a different
`IntlLangMemoizer` which supports being sent between threads in
`FluentBundle`.
Signed-off-by: David Wood <david.wood@huawei.com>
Extend loading of Fluent bundles so that bundles can be loaded from the
sysroot based on the language requested by the user, or using a nightly
flag.
Sysroot bundles are loaded from `$sysroot/share/locale/$locale/*.ftl`.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit updates the signatures of all diagnostic functions to accept
types that can be converted into a `DiagnosticMessage`. This enables
existing diagnostic calls to continue to work as before and Fluent
identifiers to be provided. The `SessionDiagnostic` derive just
generates normal diagnostic calls, so these APIs had to be modified to
accept Fluent identifiers.
In addition, loading of the "fallback" Fluent bundle, which contains the
built-in English messages, has been implemented.
Each diagnostic now has "arguments" which correspond to variables in the
Fluent messages (necessary to render a Fluent message) but no API for
adding arguments has been added yet. Therefore, diagnostics (that do not
require interpolation) can be converted to use Fluent identifiers and
will be output as before.
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
The majority of the code is only used by either rustbuild or
rustc_llvm's build script. Rust_build is compiled once for rustbuild and
once for every stage. This means that the majority of the code in this
crate is needlessly compiled multiple times. By moving only the code
actually used by the respective crates to rustbuild and rustc_llvm's
build script, this needless duplicate compilation is avoided.
Bump autocfg to 1.1.0
autocfg 1.1.0 makes it so that rustflags from the build are correctly
passed to the compiler probes, which in turn means those probes more
accurately reflect the outer build conditions. This is particularly
important if rustflags includes _required_ `-Clink-arg=` flags without
which builds will fail, as older versions of `autocfg` will then fail
the probe and erroneously report the probed feature as unavailable.
See also
https://github.com/rust-lang/rust/issues/94007#issuecomment-1040668261
Remove num_cpus dependency from bootstrap, build-manifest and rustc_s…
…ession
`std::threads::available_parallelism` was stabilized in rust 1.59.
r? ```````````````````````````@Mark-Simulacrum```````````````````````````
autocfg 1.1.0 makes it so that rustflags from the build are correctly
passed to the compiler probes, which in turn means those probes more
accurately reflect the outer build conditions. This is particularly
important if rustflags includes _required_ `-Clink-arg=` flags without
which builds will fail, as older versions of `autocfg` will then fail
the probe and erroneously report the probed feature as unavailable.
See also
https://github.com/rust-lang/rust/issues/94007#issuecomment-1040668261
debuginfo: Simplify TypeMap used during LLVM debuginfo generation.
This PR simplifies the TypeMap that is used in `rustc_codegen_llvm::debuginfo::metadata`. It was unnecessarily complicated because it was originally implemented when types were not yet normalized before codegen. So it did it's own normalization and kept track of multiple unnormalized types being mapped to a single unique id.
This PR is based on https://github.com/rust-lang/rust/pull/93503, which is not merged yet.
The PR also removes the arena used for allocating string ids and instead uses `InlinableString` from the [inlinable_string](https://crates.io/crates/inlinable_string) crate. That might not be the best choice, since that crate does not seem to be very actively maintained. The [flexible-string](https://crates.io/crates/flexible-string) crate would be an alternative.
r? `@ghost`
The previous implementation was written before types were properly
normalized for code generation and had to assume a more complicated
relationship between types and their debuginfo -- generating separate
identifiers for debuginfo nodes that were based on normalized types.
Since types are now already normalized, we can use them as identifiers
for debuginfo nodes.
removing architecture requirements for RustyHermit
RustHermit and HermitCore is able to run on aarch64 and x86_64. In the future these operating systems will also support RISC-V. Consequently, the dependency to a specific target should be removed.
The build process of `hermit-abi` fails if the architecture isn't supported.
RustHermit and HermitCore is able to run on aarch64 and x86_64.
In the future these operating systems will also support RISC-V.
Consequently, the dependency to a specific target should be removed.
Building hermit-abi fails if the architecture isn't supported.
Drop time dependency from bootstrap
This was only used for the inclusion of 'current' dates into our manpages, but
it is not clear that this is practically necessary. The manpage is essentially
never updated, and so we can likely afford to keep a manual date in these files.
It also seems possible to just omit it, but that may cause other tools trouble,
so avoid doing that for now.
This is largely done to reduce bootstrap complexity; the time crate is not particularly
small and in #92480 would have started pulling in num-threads, which does runtime
thread count detection. I would prefer to avoid that, so filing this to just drop the nearly
unused dependency entirely.
r? `@pietroalbini`
This was only used for the inclusion of 'current' dates into our manpages, but
it is not clear that this is practically necessary. The manpage is essentially
never updated, and so we can likely afford to keep a manual date in these files.
It also seems possible to just omit it, but that may cause other tools trouble,
so avoid doing that for now.
remove unused `jemallocator` crate
When it was noticed that the rustc binary wasn't actually using jemalloc via `#[global_allocator]` and that was removed, the dependency remained.
Tests pass locally with a `jemalloc = true` build, but I'll trigger a try build to ensure I haven't missed an edge-case somewhere.
r? ```@ghost``` until that completes
Bump libc and fix remove_dir_all on Fuchsia after CVE fix
With the previous `is_dir` impl, we would attempt to unlink
a directory in the None branch, but Fuchsia supports returning
ENOTEMPTY from unlinkat() without the AT_REMOVEDIR flag because
we don't currently differentiate unlinking files and directories
by default.
On the Fuchsia side I've opened https://fxbug.dev/92273 to discuss
whether this is the correct behavior, but it doesn't seem like
addressing the error code is necessary to make our tests happy.
Depends on https://github.com/rust-lang/libc/pull/2654 since we
apparently haven't needed to reference DT_UNKNOWN before this.
With the previous `is_dir` impl, we would attempt to unlink
a directory in the None branch, but Fuchsia supports returning
ENOTEMPTY from unlinkat() without the AT_REMOVEDIR flag because
we don't currently differentiate unlinking files and directories
by default.
On the Fuchsia side I've opened https://fxbug.dev/92273 to discuss
whether this is the correct behavior, but it doesn't seem like
addressing the error code is necessary to make our tests happy.
Updates std's libc crate to include DT_UNKNOWN for Fuchsia.
Update some rustc dependencies to deduplicate them
This PR updates `rand` and `itertools` in rustc (not the whole workspace) in order to deduplicate them (and hopefully slightly improve compile times).
~~Currently, `object` is still duplicated, but https://github.com/rust-lang/thorin/pull/15 and updating `thorin` in the future will remove the use of version 0.27.~~ Update: Thorin 0.2 has now been released, and this PR updates `rustc_codegen_ssa` to use it and deduplicate the `object` crate.
There's a final tiny rustc dependency, `cfg-if`, which will be left: as both versions 0.1.x and 1.0 looked to be heavily depended on, they will require a few cascading updates to be removed.
Introduce drop range tracking to generator interior analysis
This PR addresses cases such as this one from #57478:
```rust
struct Foo;
impl !Send for Foo {}
let _: impl Send = || {
let guard = Foo;
drop(guard);
yield;
};
```
Previously, the `generator_interior` pass would unnecessarily include the type `Foo` in the generator because it was not aware of the behavior of `drop`. We fix this issue by introducing a drop range analysis that finds portions of the code where a value is guaranteed to be dropped. If a value is dropped at all suspend points, then it is no longer included in the generator type. Note that we are using "dropped" in a generic sense to include any case in which a value has been moved. That is, we do not only look at calls to the `drop` function.
There are several phases to the drop tracking algorithm, and we'll go into more detail below.
1. Use `ExprUseVisitor` to find values that are consumed and borrowed.
2. `DropRangeVisitor` uses consume and borrow information to gather drop and reinitialization events, as well as build a control flow graph.
3. We then propagate drop and reinitialization information through the CFG until we reach a fix point (see `DropRanges::propagate_to_fixpoint`).
4. When recording a type (see `InteriorVisitor::record`), we check the computed drop ranges to see if that value is definitely dropped at the suspend point. If so, we skip including it in the type.
## 1. Use `ExprUseVisitor` to find values that are consumed and borrowed.
We use `ExprUseVisitor` to identify the places where values are consumed. We track both the `hir_id` of the value, and the `hir_id` of the expression that consumes it. For example, in the expression `[Foo]`, the `Foo` is consumed by the array expression, so after the array expression we can consider the `Foo` temporary to be dropped.
In this process, we also collect values that are borrowed. The reason is that the MIR transform for generators conservatively assumes anything borrowed is live across a suspend point (see `rustc_mir_transform::generator::locals_live_across_suspend_points`). We match this behavior here as well.
## 2. Gather drop events, reinitialization events, and control flow graph
After finding the values of interest, we perform a post-order traversal over the HIR tree to find the points where these values are dropped or reinitialized. We use the post-order index of each event because this is how the existing generator interior analysis refers to the position of suspend points and the scopes of variables.
During this traversal, we also record branching and merging information to handle control flow constructs such as `if`, `match`, and `loop`. This is necessary because values may be dropped along some control flow paths but not others.
## 3. Iterate to fixed point
The previous pass found the interesting events and locations, but now we need to find the actual ranges where things are dropped. Upon entry, we have a list of nodes ordered by their position in the post-order traversal. Each node has a set of successors. For each node we additionally keep a bitfield with one bit per potentially consumed value. The bit is set if we the value is dropped along all paths entering this node.
To compute the drop information, we first reverse the successor edges to find each node's predecessors. Then we iterate through each node, and for each node we set its dropped value bitfield to the intersection of all incoming dropped value bitfields.
If any bitfield for any node changes, we re-run the propagation loop again.
## 4. Ignore dropped values across suspend points
At this point we have a data structure where we can ask whether a value is guaranteed to be dropped at any post order index for the HIR tree. We use this information in `InteriorVisitor` to check whether a value in question is dropped at a particular suspend point. If it is, we do not include that value's type in the generator type.
Note that we had to augment the region scope tree to include all yields in scope, rather than just the last one as we did before.
r? `@nikomatsakis`
All tests pass now! The issue was that we weren't handling all edges
correctly, but now they are handled consistently.
This includes code to dump a graphviz file for the CFG we built for drop
tracking.
Also removes old DropRanges tests.
This adds support for branching and merging control flow and uses this
to correctly handle the case where a value is dropped in one branch of
an if expression but not another.
There are other cases we need to handle, which will come in follow up
patches.
Issue #57478
ProjectionPredicate should be able to handle both associated types and consts so this adds the
first step of that. It mainly just pipes types all the way down, not entirely sure how to handle
consts, but hopefully that'll come with time.
rustdoc: remove hand-rolled isatty
This PR replaces bindings to the platform-specific isatty APIs with the `isatty` crate, as done elsewhere in the repository.
Update rayon and rustc-rayon
This updates rayon for various tools and rustc-rayon for the compiler's parallel mode.
- rayon v1.3.1 -> v1.5.1
- rayon-core v1.7.1 -> v1.9.1
- rustc-rayon v0.3.1 -> v0.3.2
- rustc-rayon-core v0.3.1 -> v0.3.2
... and indirectly, this updates all of crossbeam-* to their latest versions.
Fixes#92677 by removing crossbeam-queue, but there's still a lingering question about how tidy discovers "runtime" dependencies. None of this is truly in the standard library's dependency tree at all.
Update cargo
6 commits in 358e79fe56fe374649275ca7aebaafd57ade0e8d..06b9d31743210b788b130c8a484c2838afa6fc27
2022-01-04 18:39:45 +0000 to 2022-01-11 23:47:29 +0000
- Port cargo to clap3 (rust-lang/cargo#10265)
- feat: support rustflags per profile (rust-lang/cargo#10217)
- Make bors ignore the PR template so it doesn't end up in merge messages (rust-lang/cargo#10267)
- Be resilient to most IO error and filesystem loop while walking dirs (rust-lang/cargo#10214)
- Remove the option to disable pipelining (rust-lang/cargo#10258)
- Always ask rustc for messages about artifacts, and always process them (rust-lang/cargo#10255)
Make rlib metadata strip works with MIPSr6 architecture
Because MIPSr6 has many differences with previous MIPSr2 arch, the previous rlib metadata stripping code in `rustc_codegen_ssa` is only for MIPSr2/r3/r5 (which share the same elf e_flags).
This commit fixed this problem. It makes `rustc_codegen_ssa` happy when compiling rustc for MIPSr6 target or hosts.
e_flags REF: e356027016/llvm/include/llvm/BinaryFormat/ELF.h (L562)
`thorin` is a Rust implementation of a DWARF packaging utility that
supports reading DWARF objects from archive files (i.e. rlibs) and
therefore is better suited for integration into rustc.
Signed-off-by: David Wood <david.wood@huawei.com>
Extract init_env_logger to crate
I've been doing some work on rustc_ast_pretty using an out-of-tree main.rs and Cargo.toml with the following:
```toml
[dependencies]
rustc_ast = { path = "../rust/compiler/rustc_ast" }
rustc_ast_pretty = { path = "../rust/compiler/rustc_ast_pretty" }
rustc_span = { path = "../rust/compiler/rustc_span" }
```
Rustc_ast_pretty helpfully uses `tracing::debug!` but I found that in order to enable the debug output, my test crate must depend on rustc_driver which is an enormously bigger dependency than what I have been using so far, and slows down iteration time because an enormous dependency tree between rustc_ast and rustc_driver must now be rebuilt after every ast change.
I pulled out the tracing initialization to a new minimal rustc_log crate so that projects depending on the other rustc crates, like rustc_ast_pretty, can access the `debug!` messages in them without building all the rest of rustc.
The task of the macro is simple enough that a decl macro is almost ten
times shorter than the original proc macro. The proc macro is 159 lines
while the decl macro is just 18 lines.
This reduces the amount of dependencies of rustbuild from 45 to 37. It
also slight reduces compilation time from 47s to 44s for debug builds.
Store liveness in interval sets for region inference
On the 100,000 line test case from https://github.com/rust-lang/rust/issues/90445, this reduces memory usage from 35 GB to 444 MB at peak (based on DHAT results, though with regular malloc), and yields a 9.4x speedup, with wall time going from 14.5 seconds to 1.5s. Performance results show that for the majority of real-world code this has little to no impact, but it's expected to generally scale better for auto-generated functions and other cases which stress this area of the compiler, as results on #90445 illustrate.
There may also be further room for improvement in future PRs making use of this data structures benefits over raw bitsets (which, at some level, are a less perfect fit for representing liveness, which is almost always composed of contiguous ranges, not point locations).
Fixes#90445.
This is a compact, fast storage for variable-sized sets, typically consisting of
larger ranges. It is less efficient than a bitset if ranges are both small and
the domain size is small, but will still perform acceptably. With enormous
domain sizes and large ranges, the interval set performs much better, as it can
be much more densely packed in memory than the uncompressed bit set alternative.
Update chalk to 0.75.0
- Compute flags in `intern_ty`
- Remove `tracing-serde` from `PERMITTED_DEPENDENCIES`
- Bump `tracing-tree` to 0.2.0
- Bump `tracing-subscriber` to 0.3.3
Stabilize asm! and global_asm!
Tracking issue: #72016
It's been almost 2 years since the original [RFC](https://github.com/rust-lang/rfcs/pull/2850) was posted and we're finally ready to stabilize this feature!
The main changes in this PR are:
- Removing `asm!` and `global_asm!` from the prelude as per the decision in #87228.
- Stabilizing the `asm` and `global_asm` features.
- Removing the unstable book pages for `asm` and `global_asm`. The contents are moved to the [reference](https://github.com/rust-lang/reference/pull/1105) and [rust by example](https://github.com/rust-lang/rust-by-example/pull/1483).
- All links to these pages have been removed to satisfy the link checker. In a later PR these will be replaced with links to the reference or rust by example.
- Removing the automatic suggestion for using `llvm_asm!` instead of `asm!` if you're still using the old syntax, since it doesn't work anymore with `asm!` no longer being in the prelude. This only affects code that predates the old LLVM-style `asm!` being renamed to `llvm_asm!`.
- Updating `stdarch` and `compiler-builtins`.
- Updating all the tests.
r? `@joshtriplett`
replace dynamic library module with libloading
This PR deletes the `rustc_metadata::dynamic_lib` module in favor of the popular and better tested [`libloading` crate](https://github.com/nagisa/rust_libloading/).
We don't benefit from `libloading`'s symbol lifetimes since we end up leaking the loaded library in all cases, but the call-sites look much nicer by improving error handling and abstracting away some transmutes. We also can remove `rustc_metadata`'s direct dependencies on `libc` and `winapi`.
This PR also adds an exception for `libloading` (and its license) to tidy, so this will need sign-off from the compiler team.
They are also removed from the prelude as per the decision in
https://github.com/rust-lang/rust/issues/87228.
stdarch and compiler-builtins are updated to work with the new, stable
asm! and global_asm! macros.
Rollup of 7 pull requests
Successful merges:
- #90709 (Only shown relevant type params in E0283 label)
- #91551 (Allow for failure of subst_normalize_erasing_regions in const_eval)
- #91570 (Evaluate inline const pat early and report error if too generic)
- #91571 (Remove unneeded access to pretty printer's `s` field in favor of deref)
- #91610 (Link to rustdoc_json_types docs instead of rustdoc-json RFC)
- #91619 (Update cargo)
- #91630 (Add missing whitespace before disabled HTML attribute)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Update cargo
8 commits in 294967c53f0c70d598fc54ca189313c86c576ea7..40dc281755137ee804bc9b3b08e782773b726e44
2021-11-29 19:04:22 +0000 to 2021-12-06 21:54:44 +0000
- Unify the description of quiet flag (rust-lang/cargo#10168)
- Stabilize future-incompat-report (rust-lang/cargo#10165)
- Support abbreviating `--release` as `-r` (rust-lang/cargo#10133)
- doc: nudge towards simple version requirements (rust-lang/cargo#10158)
- Upgrade clap to 2.34.0 (rust-lang/cargo#10164)
- Treat EOPNOTSUPP the same as ENOTSUP when ignoring failed flock calls. (rust-lang/cargo#10157)
- Add note about RUSTFLAGS removal from build scripts. (rust-lang/cargo#10141)
- Make clippy happy (rust-lang/cargo#10139)
Use object crate for .rustc metadata generation
We already use the object crate for generating uncompressed .rmeta
metadata object files. This switches the generation of compressed
.rustc object files to use the object crate as well. These have
slightly different requirements in that .rmeta should be completely
excluded from any final compilation artifacts, while .rustc should
be part of shared objects, but not loaded into memory.
The primary motivation for this change is #90326: In LLVM 14, the
current way of setting section flags (and in particular, preventing
the setting of SHF_ALLOC) will no longer work. There are other ways
we could work around this, but switching to the object crate seems
like the most elegant, as we already use it for .rmeta, and as it
makes this independent of the codegen backend. In particular, we
don't need separate handling in codegen_llvm and codegen_gcc.
codegen_cranelift should be able to reuse the implementation as
well, though I have omitted that here, as it is not based on
codegen_ssa.
This change mostly extracts the existing code for .rmeta handling
to allow using it for .rustc as well, and adjusts the codegen
infrastructure to handle the metadata object file separately: We
no longer create a backend-specific module for it, and directly
produce the compiled module instead.
This does not `fix` #90326 by itself yet, as .llvmbc will need to be
handled separately.
r? `@nagisa`
We already use the object crate for generating uncompressed .rmeta
metadata object files. This switches the generation of compressed
.rustc object files to use the object crate as well. These have
slightly different requirements in that .rmeta should be completely
excluded from any final compilation artifacts, while .rustc should
be part of shared objects, but not loaded into memory.
The primary motivation for this change is #90326: In LLVM 14, the
current way of setting section flags (and in particular, preventing
the setting of SHF_ALLOC) will no longer work. There are other ways
we could work around this, but switching to the object crate seems
like the most elegant, as we already use it for .rmeta, and as it
makes this independent of the codegen backend. In particular, we
don't need separate handling in codegen_llvm and codegen_gcc.
codegen_cranelift should be able to reuse the implementation as
well, though I have omitted that here, as it is not based on
codegen_ssa.
This change mostly extracts the existing code for .rmeta handling
to allow using it for .rustc as well, and adjust the codegen
infrastructure to handle the metadata object file separately: We
no longer create a backend-specific module for it, and directly
produce the compiled module instead.
This does not fix#90326 by itself yet, as .llvmbc will need to be
handled separately.
Update Clippy dependencies
Clippy has two outdated dependencies, where one indirect dependency has been flagged by rustsec for dropping a lifetime. See [RUSTSEC-2020-0146](https://rustsec.org/advisories/RUSTSEC-2020-0146). This PR updates these dependencies.
With previous dependency updates, it was tried to prevent duplicates in the `Cargo.lock` file of rust-lang/rust. I've tried to keep this in mind with this update.
* Dependency `semver`
* Used in `src/tools/cargo/Cargo.toml` as version `1.0.3`
* Used in `src/tools/rust-analyzer/crates/project_model/Cargo.toml` as version `1`
* Updated in Clippy from `0.11` to `1.0` (Clippy usually defines the major and minor patch version). The `Cargo.lock` file lists `1.0.3` which is one patch version behind the most recent one but prevents a duplicate with cargo's pinned version.
* Dependency `cargo_metadata`
* Used in several tools as `0.14`
* Used in `src/tools/tidy` and `src/tools/rls` as `0.12`
* Updated in Clippy from `0.12` to `0.14`
All updates to the `Cargo.lock` have been done automatically by `x.py`.
There are still some tools with these outdated dependencies. Clippy didn't require any changes, and it would be likely that the others could also be updated without any problem. Let me know if I should try to update them as well 🙃.
Keep up the good work, whoever is reading this 🦀
---
For Clippy:
changelog: none
The rustc fork of rayon integrates with Cargo's jobserver to limit the
amount of parallelism. However, rustdoc's use case is concurrent I/O,
which is not CPU-heavy, so it should be able to use mainline rayon.
See this discussion [1] for more details.
[1]: https://github.com/rust-lang/rust/issues/90227#issuecomment-952468618
Note: I chose rayon 1.3.1 so that the rayon version used elsewhere in
the workspace does not change.
Add support for artifact size profiling
This adds support for profiling artifact file sizes (incremental compilation artifacts and query cache to begin with).
Eventually we want to track this in perf.rlo so we can ensure that file sizes do not change dramatically on each pull request.
This relies on support in measureme: https://github.com/rust-lang/measureme/pull/169. Once that lands we can update this PR to not point to a git dependency.
This was worked on together with `@michaelwoerister.`
r? `@wesleywiser`
Adopt let_else across the compiler
This performs a substitution of code following the pattern:
```
let <id> = if let <pat> = ... { identity } else { ... : ! };
```
To simplify it to:
```
let <pat> = ... { identity } else { ... : ! };
```
By adopting the `let_else` feature (cc #87335).
The PR also updates the syn crate because the currently used version of the crate doesn't support `let_else` syntax yet.
Note: Generally I'm the person who *removes* usages of unstable features from the compiler, not adds more usages of them, but in this instance I think it hopefully helps the feature get stabilized sooner and in a better state. I have written a [comment](https://github.com/rust-lang/rust/issues/87335#issuecomment-944846205) on the tracking issue about my experience and what I feel could be improved before stabilization of `let_else`.
Index and hash HIR as part of lowering
Part of https://github.com/rust-lang/rust/pull/88186
~Based on https://github.com/rust-lang/rust/pull/88880 (see merge commit).~
Once HIR is lowered, it is later indexed by the `index_hir` query and hashed for `crate_hash`. This PR moves those post-processing steps to lowering itself. As a side objective, the HIR crate data structure is refactored as an `IndexVec<LocalDefId, Option<OwnerInfo<'hir>>>` where `OwnerInfo` stores all the relevant information for an HIR owner.
r? `@michaelwoerister`
cc `@petrochenkov`
The syn crate has gained support for let_else syntax in version 1.0.76,
see https://github.com/dtolnay/syn/pull/1057 .
In the three instances that use let_else, we've sent code through an
attr macro, which would create compile errors when there was no
let_else support in syn. To avoid this, we ran
`cargo +nightly update -p syn` for updating the syn crate.
Wrapper for `-Z gcc-ld=lld` to invoke rust-lld with the correct flavor
This PR adds an `lld-wrapper` tool which is installed as `ld` and `ld64` in `lib\rustlib\<host_target>\bin\gcc-ld` directory and whose sole purpose is to invoke `rust-lld` in the parent directory with the correct flavor. Lld decides which flavor to use from either the first two commandline arguments or from the name of the executable (`ld` for GNU/ld flavor, `ld64` for Darwin/Macos/ld64 flavor and so on). Symbolic links could not be used as they are not supported by rustup and on Windows.
The wrapper replaces full copies of rust-lld which added some significant bloat. On UNIXish operating systems it exec rust-lld, on Windows it spawns it as a child process.
Fixes#88869.
r? ```@Mark-Simulacrum```
cc ```@nagisa``` ```@petrochenkov``` ```@1000teslas```
The wrapper is installed as `ld` and `ld64` in the `lib\rustlib\<host_target>\bin\gcc-ld`
directory and its sole purpose is to invoke `rust-lld` in the parent directory with
the correct flavor.
Add `deref_into_dyn_supertrait` lint.
Initial implementation of #89460. Resolves#89190.
Maybe also worth a beta backport if necessary.
r? `@nikomatsakis`
Added -Z randomize-layout flag
An implementation of #77316, it currently randomly shuffles the fields of `repr(rust)` types based on their `DefPathHash`
r? ``@eddyb``
Simplify lazy DefPathHash decoding by using an on-disk hash table.
This PR simplifies the logic around mapping `DefPathHash` values encountered during incremental compilation to valid `DefId`s in the current session. It is able to do so by using an on-disk hash table encoding that allows for looking up values directly, i.e. without deserializing the entire table.
The main simplification comes from not having to keep track of `DefPathHashes` being used during the compilation session.
Use a separate interner type for UniqueTypeId
Using symbol::Interner makes it very easy to mixup UniqueTypeId symbols
with the global interner. In fact the Debug implementation of
UniqueTypeId did exactly this.
Using a separate interner type also avoids prefilling the interner with
unused symbols and allow for optimizing the symbol interner for parallel
access without negatively affecting the single threaded module codegen.
